User Panel
User Panel
User Panel
|
Posted: 12/20/2010 8:59:25 AM EDT
[Last Edit: RTUtah]
Originally Posted By PSYWAR1-0: The Recce platform was something that sprung up within the NSW and 5th SFG communities that first became the Special Purpose Receiver built by Crane, which was supposed to be installed on any M4 lower. After a time when the perfect storm of the users wanting a match-grade trigger and the bolt-bounce issue was identified, the Special Purpose Receiver morphed into a complete rifle that was type-classified as the Mk12. Mk12: A BRIEF HISTORY (as authored by "LGT" & "FL") Mk12 Special Purpose Rifle (SPR) Scoped versions of the M16 rifle existed as far back as the 1960s. Like nearly all historic military rifles, the M16 went through decades of efforts to improve its accuracy, both in the military and civilian marksmanship communities. The need for the SPR dates back to the late 1980s and early 1990s when the 7.62mm M21 sniper rifle, a semi-automatic weapon of Vietnam vintage, was replaced by the M24 sniper rifle, a bolt action weapon. The M24 was originally specified to be a .300 Winchester Magnum, but the Army decided to field it in 7.62 NATO for a variety of economic reasons. This left the M24 in the unenviable position of being the worst of both worlds in the eyes of snipers at the time, since it lost the fast-shooing, semiautomatic capability of the M21, but did not gain the range advantage of the .300WM. This compromise left a vacant requirement for a fast-shooting semi-automatic sniper rifle. This need was most apparent in the US Army Special Forces (SF) community, since the other commands within the Special Operations Forces structure filled that need with Knights Armament Corporation's SR-25 sniper rifle. Army SF, being prohibited by its leadership from procuring the SR-25, sought the next best alternative, namely a Special Purpose Receiver (SPR) kit to convert the Army SF M4 carbines into highly accurate rifles. In late 1998, at the request of SFC Steve Holland of 5th Special Forces Group, and the approval of the SOPMOD joint IPT, the Special Operations Peculiar Modifications (SOPMOD) Program Manager, Troy Smith, authorized the purchase of 5 sets of commercial items as an SPR experiment. The original requirement was for USASOC, mainly the SF Groups, as WARCOM had the MK11, 7.62mm system. Once the SPR requirement was developed and demonstrated through experimentation, most of the other commands in USSOCOM added themselves to the Basis of Issue Plan (BOIP). The USSOCOM requirement for the SPR, with improved ammunition, was approved in July 1999, as part of the SOPMOD Kit, Operational Requirements Document, Version 5 (ORD 5). Further initial development included several variants of the SPR and new ammunition that were compatible with the M4 carbine's lower receiver. It was found that standard issue M855 5.56mm ammunition was not consistent enough to meet the requirement. In 2000, based on an upgrade requirement to provide a match-grade trigger to the design, Mr. Paul Miller, the SPR project manager, discovered an opportunity to pick through over 15,000 M16A1s that had been sent to Crane for destruction. Realizing that these M16A1 rifles, some of which were virtually new, could be used as "free lumber" to build full SPR weapons, Paul selected several thousand rifles to be set aside for the new SPR project. The SPR underwent a minor but significant name change, with the R having originally stood for "Receiver" now standing for "Rifle" The new weapon system was worthless without a matching round of ammunition to obtain the performance required. The PEO-SP USSOCOM authorized the new round that became Mk262 as part of the Mk12 system in August 2000. Paul Miller and his SPR team refined the 77-grain prototype ammunition and built approximately 124 SPR Rifles in the summer of 2001. These were finished just in time to ship out to Army SF in late October 2001, to be used in the first invasion of Afghanistan. The SPR rifles were extremely well-received, and the SOF combat units ordered hundreds more. In May 2002, USSOCOM removed the Mk12 and other complete weapons projects from the SOPMOD Program and placed them under the newly-formed USSOCOM Weapons Program. The fielded weapons included two versions (Mk12 Special Purpose Rifle Mod0 and Mod1). Fielding has since been structured for Mk12 Mod1 Special Purpose Rifle only. This rifle is used by Joint USSOCOM Commands and the USMC in combination with M262 (AA53, 77 grain) ammunition. Formal fielding of the full-rate production version of the Mk12 rifle and ammunition occurred in May 2003 and was completed in FY '04. In 2012, as the decade of war on terrorism was winding down and the SCAR weapon system began replacing the requirement for the Mk12, USSOCOM and Naval Special Warfare divested themselves of the Mk12 weapons system, and the Mk12 is now being looked at to fill a Designated Marksman Role within Brown Water Navy commands. * * * * * * * * * * The following parts lists and substitution parts was compiled by lancecriminal86 over the course of a LOT of research. Read up and pay attention! Below are the 100% .mil-spec parts lists to build a true SPR or Mk12 clone. Some of these parts are no longer manufactured and will require much effort and money to locate through forums and online brokers. Keep in mind the rifles were built off donor M16A1s, hence the prevalent A1 parts in the lower receivers and the BCGs. They were also first configured using parts available from 1998-2004, and most are inferior in some ways to newer designs. If this bothers you too much, STOP NOW. The rifles were issued as a kit in a Pelican 1700 case with cutouts. The kits included the rifle with suppressor, optic, bipod, an Eagle TAS-1 UMSS sling (unobtanium and also absolute crap), with a Dewey 1-piece cleaning rod plus Otis cleaning kit, and a cutout for magazines. An operator's manual was also included, however these have not been officially released for public consumption. However, the manuals are out there, and some companies building Mk12 uppers include one. Whether these are official .mil operator's manuals or specially made is currently unclear as the manual itself still contains language that it is not for distribution. - Alternate .mil-spec parts due to NFA, NLA parts, or changes in name/markings for current production in [brackets] - Extra notes about parts or availability are in (parenthesis) LOWER Lower receivers were standard across the SPR/Mk12 variants and the only variations would be between grips, stocks, and buffers. Most were marked either Colt or GM Hydramatic. All other parts were the same in regards to the lower parts. One caveat is the trigger, as the program originally selected the Knight's Armament 2-stage Full Auto Match trigger. Later on, some issues regarding negligent discharges occurred, and Geissele SSF triggers ultimately found their way into the Mk12 family. Whether 100% of all Mk12s eventually received the Geissele trigger isn't clear, so either is acceptable.
The upper receivers, which ultimately differentiate the four variants of the Mk12, have the most variation between each other. Early SPR/Mod0
ModH, Mod "Holland"
Naturally, once these rifles were issued to units, operators and even Marines used various non-issued parts. Here is a short summary of what has been seen: Early SPR/Mod0: Both Leupold 3.5-10x40mm and 3-9x36mm scopes have been used. Many have had carbine stocks like the old CAR-style, enhanced M4, SOPMOD Gen I, or even the Tactical DuoStock swapped on. Mod1: One 3rd SFG-issued rifle pictured with SSgt Robert J. Miller (MoH recipient) used an A.R.M.S #36 S-EX 5.56mm rail, and a Leupold M3X 10x fixed-power scope, possibly pulled from an M-24 or SR-25 rifle. Another has been seen with a Magpul PRS, LaRue mount, and a Premier Reticles 3-15x used by an AMU shooter, and a similar rifle was pictured on a FOB in a very posed-looking photo. Further, a USMC-issued Mod1 was seen using #22 Medium rings instead of High rings, and a LaRue mount has been spotted as well. Grips have varied from the usual A1, A2, and ERGO, and at least one Magpul MIAD has been used. As with the Mod0s, carbine stocks like the SOPMOD and M4 have been used on Mod1s. ModH: The Mod "Holland" was already a small-batch configuration, but even as soon as they were issued to 5th SFG units, some Ace SOCOM stocks were replaced with Magpul ACS and CTR stocks. Optics are basically anything existing in the unit's inventory, from S&B ShortDots still in the system, the 3-9x and 3.5-10x Leupold scopes from earlier Mod0s, and there's even a photo of an ELCAN on a Mod1 floating around. No non-magnified optics like EOTechs or regular Aimpoint M2/M4s, but Micros have been seen on offset mounts. Backup iron sights, as a whole, were almost entirely left unmounted. Grips were again the same usual selection. Parts Alternatives for Clone Building Many parts are rare, expensive, and/or both. Despite this, there are some alternatives to a 100% pure clone that will still provide the same visual look and performance. While not a museum-grade clone, most would be hard-pressed to discern the difference. Just know there are those of us out there that will haze and peer-pressure you into further moving your build towards a true clone. Barrel: Popular options are the White Oak Armament SPR barrel (rifle gas), BCM's SPR barrel, Rainier's Match and Ultramatch offerings (ensure it's the SPR contour with 12th Model profile), Ballistic Advantage's SPR barrel. Compass Lake Engineering can also spin a Mk12 profiled barrel with a Criterion chrome-lined blank, or even a Krieger, which was one of the original contenders for the program. The DPMS Mk12 barrels are NOT properly profiled for a clone. Optics & Rings: In the case of the Leupold 3-9x or 3.5-10x, it's generally okay to go for a non-illuminated version of either, sometimes with M1 or other turrets and reticles. As far as the NightForce scope, the 2.5-10x24mm is not generally released to the public anymore (with one recent exception through Sniper's Hide), so many use the 32mm or even 42mm versions with the #22 High rings. As for the rings, any of the recent produced A.R.M.S. #22s with the lever-stop humps are functionally the same, the desire for non-lever-stops is purely aesthetic when going for the most authentic look. As LaRue LT-104s have been seen in use, it is justifiable to use one depending on whether you have a specific rifle you want to copy, or even just if you absolutely cannot acquire #22 High rings. A.R.M.S. #38 SWAN Sleeve: The #38 family of sleeves are no longer available. Finding them secondhand usually cost $250-$300 easy, more for rarer early variants. Fortunately, PRi's copies of the sleeves look and function almost identically, with minor visual differences. PRi and other builders supply these currently for complete Mod0 builds. FSB: While the set-screw version of PRi's FSB is spec, most use the cross-bolt, clamp-style version. They are extremely robust, and when aligned and torqued, have been shown to hold strong enough that you'll probably shear your barrel extension pin or upper before it budges. This is mainly how Mod0 uppers are supplied by most vendors, including PRi themselves. Suppressor, Brake/Collar: Diverging from the OPS Inc. or AEM brake and collar will get you MAJOR flak. Trust me, I've been running an AAC SPR/M4 for years now and it took a LONG time to not get clubbed every time I posted it. The Allen Engineering AEM5 is basically the current production of the OPS Inc. 12th Model, as they were originally made by Ron Allen and his team in the first place. Only minor differences separate original OPS Inc. cans from AE cans, and these are only obvious to trained eyes. As far as the rest, you can swap Colt parts out for any other .mil-spec parts, like BCM, DD, CMT, etc. Any billet uppers/lowers, funky BCG coatings, extended bolt releases, etc. are extremely frowned upon. Remember, once you start going down the path of building a "better" rifle rather than what was spec, you're quickly beyond clone territory and would have been better off building a custom 16" or 20" rifle. Cloning is generally viewed as all-in or not at all. * * * * * * * * * * Complete Mk12 Mod0 / Mod1 Uppers Bravo Company Manufacturing High Caliber Sales Precision Reflex Inc. Specific Mk12 Tech Augee's side-by-side comparison of the original ARMS SWAN Sleeve and PRI reproduction PEQ Sleeves: bottom of p136 KOBK's side-by-side comparison of PRI Gen I, II, and III handguards, and Gen I and Gen II FSBs, and SWANs: middle of p137 Augee's Mod1 gas block tech: top half of p357 Glass1's Early Mod0 photo breakdown: middle of p449 tamboi's Leupold Vari-X, TS30, and TS30A2 scope history/lineage, and part numbers, p.792 * * * * * * * * * * As of 16 May 2024, Ron Allen is still making custom parts for his suppressors: * * * * * * * * * *  Attached File |
|
|
|
AL, USA
|
Posted: 1/18/2017 4:04:21 PM EDT
[Last Edit: blbennett1288]
[#1]
Quote HistoryOriginally Posted By Zakk101abn:
If you made it mid March on a weekend I can go. If Feb, it would have to be during the week  Quote HistoryOriginally Posted By Zakk101abn:
Originally Posted By RTUtah:
I'd guess sometime in February? Haven't gotten that far yet, lol. Depending on how my work schedule falls I could make the trip during the week or weekend, but I couldn't let you know more than a week or 2 from the date. 
Edit: new page pic. I still need a couple items. |
|
|
|
Posted: 1/18/2017 5:03:38 PM EDT
[#2]
Quote HistoryOriginally Posted By chenault:
In spring or fall we need to do a Midwest shoot. I'm down! |
|
|
|
USA
|
Posted: 1/18/2017 5:11:15 PM EDT
[#3]
Northeast shoot anyone?
 ....might only be a couple people
|
|
|
WA, USA
|
Posted: 1/18/2017 5:38:40 PM EDT
[#4]
Us left coasters need a mk12 shoot also.
WA,OR,ID,MT,UT Anyone around these state that would participate? |
|
|
|
Posted: 1/18/2017 5:57:37 PM EDT
[#5]
Anyone have a ring lapping tool they wanna loan to a fellow cloner...
|
|
|
|
|
Posted: 1/18/2017 6:17:12 PM EDT
[#6]
Quote HistoryOriginally Posted By Samson-Dogg:
Hey guys. I need some quick input. Do we want the serial number AND bar code for the serial number left blank or do we want the bar code on the label and just the serial number blank? In the serial number area there is a bar code with the serial number directly below it. That's the part in question. Bar code and blank serial number or no bar code and blank serial number? I vote bar code with blank serial. |
|
|
|
|
Posted: 1/18/2017 6:29:23 PM EDT
[#7]
Quote HistoryOriginally Posted By Samson-Dogg:
Hey guys. I need some quick input. Do we want the serial number AND bar code for the serial number left blank or do we want the bar code on the label and just the serial number blank? In the serial number area there is a bar code with the serial number directly below it. That's the part in question. Bar code and blank serial number or no bar code and blank serial number? I vote no bar code, no serial number. I planned to have kinkos or maybe myself to get a barcode generator and put my rifle SN and can SN ...if when ever it gets approved. |
|
|
|
USA
|
Posted: 1/18/2017 6:40:21 PM EDT
[#8]
Quote HistoryOriginally Posted By Zakk101abn:
Anyone have a ring lapping tool they wanna loan to a fellow cloner... Check your email sir |
|
|
|
Posted: 1/18/2017 6:53:06 PM EDT
[#9]
Quote HistoryOriginally Posted By chenault:
In spring or fall we need to do a Midwest shoot. Yes. I'm jelly of those east coasters havin' a get together. |
|
|
|
|
Posted: 1/18/2017 7:19:07 PM EDT
[#10]
Quote HistoryOriginally Posted By Zakk101abn:
If you made it mid March on a weekend I can go. If Feb, it would have to be during the week Fuckit, we'll do both! 
I haven't been down there yet this winter to shoot the Mk12 so the next time I plan to go, I'll let all you jerks know. I'll call Bryan this week and get something set up so I can relay a date to y'all. |
|
|
|
MN, USA
|
Posted: 1/18/2017 8:33:20 PM EDT
[Last Edit: Lurp06x]
[#11]
I think I will keep the 2.5-8 mk4 its not a terrible scope at all still good quality. Pics won't show up? Any way got upper and scope. Now waiting on brownells to get there a1 lower in stock |
|
|
PA, USA
|
Posted: 1/18/2017 9:15:35 PM EDT
[#12]
Quote HistoryOriginally Posted By unstabl:
I vote bar code with blank serial. Quote HistoryOriginally Posted By unstabl:
Originally Posted By Samson-Dogg:
Hey guys. I need some quick input. Do we want the serial number AND bar code for the serial number left blank or do we want the bar code on the label and just the serial number blank? In the serial number area there is a bar code with the serial number directly below it. That's the part in question. Bar code and blank serial number or no bar code and blank serial number? I vote bar code with blank serial. I agree. Bar code with blank serial. |
|
|
|
Posted: 1/18/2017 9:16:50 PM EDT
[#13]
Quote HistoryOriginally Posted By cbfurg:
Let's do an Austin shoot! Quote HistoryOriginally Posted By cbfurg:
Originally Posted By ArmedFerret:
Originally Posted By Samson-Dogg:
Wish I could make that. Austin is a bit far though Wanna come keep me company in line at Franklin's on the 15th?  Let's do an Austin shoot! Best of the West shoot needs to happen fosho. Count me in. Maybe Samson and I can come up with a little something of a treat. |
|
|
|
VA, USA
|
Posted: 1/18/2017 10:29:09 PM EDT
[#14]
Quote HistoryOriginally Posted By gunnut003:
I vote no bar code, no serial number. I planned to have kinkos or maybe myself to get a barcode generator and put my rifle SN and can SN ...if when ever it gets approved. This^^ https://www.google.com/?gws_rd=ssl#q=free+barcode+generator I am not wanting any labels however there are several free bar code generators available (linky above^^^). Why not leave the bar code and SN blank and generate a real bar code to match your various serial numbers? With as much detail as some of you guys are putting into your clone builds why skimp on this detail? |
|
|
TX, USA
|
Posted: 1/18/2017 10:32:44 PM EDT
[#15]
Quote HistoryOriginally Posted By lancecriminal86:
Best of the West shoot needs to happen fosho. Count me in. Maybe Samson and I can come up with a little something of a treat. Quote HistoryOriginally Posted By lancecriminal86:
Originally Posted By cbfurg:
Originally Posted By ArmedFerret:
Originally Posted By Samson-Dogg:
Wish I could make that. Austin is a bit far though Wanna come keep me company in line at Franklin's on the 15th? Let's do an Austin shoot! Best of the West shoot needs to happen fosho. Count me in. Maybe Samson and I can come up with a little something of a treat. I'd be down as well. Sometime before it gets warm, if that's possible this year in Texas... |
|
|
|
Posted: 1/18/2017 11:50:55 PM EDT
[Last Edit: chenault]
[#16]
Quote HistoryOriginally Posted By bboehme:
I'd be down as well. Sometime before it gets warm, if that's possible this year in Texas... Keep me posted. If anyone had a lead on a used nightforce 2.5-10 X 24 can you give me a shout out please |
|
|
|
|
Posted: 1/19/2017 12:40:02 AM EDT
[#17]
Quote HistoryOriginally Posted By RTUtah:
Southeast Clone Shoot Like ShaneWang said, it's high-time we organized a Mk12 shoot in this AOR. Forum member turtlesniper has private land about 45 minutes inland of Myrtle Beach with a big range out to 1000m, and steel silhouettes staged all along the way. It's flat, rural country and I've shot out there several times with him and his friends/family. Nice folks, very knowledgeable shooters with lots of NFA goodies. ShaneWang Eyekhan MNRidesHonda HighlandE2 Zakk101abn 02Overlander RTUtah I'll talk to Bryan (aka: turtlesniper) and let him know I've got a list of bros with Mk12s and itchy trigger-fingers. Those names listed are just those who either expressed interest, are in my general AO. If you want in, let me know; if you're on the list and are opting out, you're dead to me.  https://www.youtube.com/watch?v=j-aaXTAAkTIIN! Might bring this 
|
|
|
|
|
Posted: 1/19/2017 12:50:15 AM EDT
[#18]
Quote HistoryHideous! That picture doesn't make me want one at all. 
|
|
|
|
|
Posted: 1/19/2017 1:04:07 AM EDT
[#19]
Quote HistoryOriginally Posted By chenault:
Hideous! That picture doesn't make me want one at all. Ahaha your FSGB/FF RAS Carbine makes me moist all the time
|
|
|
|
|
Posted: 1/19/2017 1:20:07 AM EDT
[Last Edit: RTUtah]
[#20]
Quote HistoryBetter bring a flatbed 18-wheeler cause that bitch is LONG!
Seriously though, she's a beaut. Bring 'em all, bro! I've got plenty of room at the casa. |
|
|
|
|
Posted: 1/19/2017 5:21:46 AM EDT
[#21]
Quote HistoryOriginally Posted By RTUtah:
Better bring a flatbed 18-wheeler cause that bitch is LONG!
Seriously though, she's a beaut. Bring 'em all, bro! I've got plenty of room at the casa. built a sam-r they said, still gonna be shorter than hunter's block 2 they said |
|
|
|
AZ, USA
|
Posted: 1/19/2017 5:26:52 AM EDT
[#22]
Quote HistoryOriginally Posted By ShaneWang:
built a sam-r they said, still gonna be shorter than hunter's block 2 they said Its a B2 varmint rifle |
|
|
TX, USA
|
Posted: 1/19/2017 10:07:20 AM EDT
[#23]
Quote HistoryOriginally Posted By bboehme:
I'd be down as well. Sometime before it gets warm, if that's possible this year in Texas... count me in. not a bad drive from Houston. Maybe i'll have my AEM5 by then. |
|
|
PA, USA
|
Posted: 1/19/2017 10:36:18 AM EDT
[#24]
Quote HistoryOriginally Posted By Dobs013:
Northeast shoot anyone? ....might only be a couple peopleI'm in, club I belong to goes out to 700yd. |
|
|
USA
|
Posted: 1/19/2017 10:40:56 AM EDT
[#25]
Quote HistoryOriginally Posted By ChrisWMT:
I'm in, club I belong to goes out to 700yd. Quote HistoryOriginally Posted By ChrisWMT:
Originally Posted By Dobs013:
Northeast shoot anyone? ....might only be a couple peopleI'm in, club I belong to goes out to 700yd. Sweet! Where in PA? I'm in CT so I can pretty much get anywhere in the northeast in a few hours. |
|
|
|
Posted: 1/19/2017 10:43:04 AM EDT
[#26]
Quote HistoryOriginally Posted By ARdvark:
count me in. not a bad drive from Houston. Maybe i'll have my AEM5 by then. Quote HistoryOriginally Posted By ARdvark:
Originally Posted By bboehme:
I'd be down as well. Sometime before it gets warm, if that's possible this year in Texas... count me in. not a bad drive from Houston. Maybe i'll have my AEM5 by then. Don't get me started. Both my AEM5's were approved DEC 28. I'm waiting on capital armory. On Jan 28 I'll go ahead and request a certified copy of my stamps. Might be faster. |
|
|
|
|
Posted: 1/19/2017 12:25:55 PM EDT
[#27]
|
|
|
|
USA
|
Posted: 1/19/2017 12:53:41 PM EDT
[Last Edit: LongTrang]
[#28]
Does anyone know what goes in that real thin slot in the top left? Right below the Dewey rod handle?
Edit: Forgot to hit the "quote function" regarding the post with the 1700 case at the top of the page. |
|
|
|
Posted: 1/19/2017 12:55:10 PM EDT
[#29]
Quote HistoryOriginally Posted By LongTrang:
Does anyone know what goes in that real thin slot in the top left? Right below the Dewey rod handle? Edit: Forgot to hit the "quote function" regarding the post with the 1700 case a few posts up. Bore guide. |
|
|
|
USA
|
Posted: 1/19/2017 12:55:33 PM EDT
[#30]
Quote HistoryOriginally Posted By ArmedFerret:
Bore guide. Got it. Thank you |
|
|
PA, USA
|
Posted: 1/19/2017 1:46:20 PM EDT
[#31]
Quote HistoryOriginally Posted By Dobs013:
Sweet! Where in PA? I'm in CT so I can pretty much get anywhere in the northeast in a few hours. Gap, PA - http://www.nhrpc.org/ @SDMF_Rebel you in? |
|
|
|
Posted: 1/19/2017 1:49:19 PM EDT
[#32]
Quote HistoryOriginally Posted By ChrisWMT:
Gap, PA - http://www.nhrpc.org/ @SDMF_Rebel you in? I haven't been keeping up. What's going on? Are we bringing fruit plates? |
|
|
|
PA, USA
|
Posted: 1/19/2017 1:58:20 PM EDT
[#33]
Quote HistoryOriginally Posted By SDMF_Rebel:
I haven't been keeping up. What's going on? Are we bringing fruit plates? Cheese and cracker trays, plus a MK12 shoot might break out. |
|
|
|
Posted: 1/19/2017 2:04:04 PM EDT
[#34]
I haven't been down to New Holland in years.
Do I have to give them my first born and 20% of my paycheck for the honor of shooting for a couple hours? |
|
|
|
PA, USA
|
Posted: 1/19/2017 2:17:49 PM EDT
[#35]
Quote HistoryOriginally Posted By SDMF_Rebel:
I haven't been down to New Holland in years. Do I have to give them my first born and 20% of my paycheck for the honor of shooting for a couple hours? $5 in a cup when with a member. Photo thread: 
|
|
|
WA, USA
|
Posted: 1/19/2017 3:31:50 PM EDT
[#36]
Quote HistoryOriginally Posted By Dobs013:
Northeast shoot anyone? ....might only be a couple peopleoh yes, Seattle here, and I know just the place Rock Lake Range, it would work for Oregon, Idaho, Montana |
|
|
|
Posted: 1/19/2017 3:34:11 PM EDT
[Last Edit: ArmedFerret]
[#37]
Quote HistoryOriginally Posted By tamboi:
oh yes, Seattle here, and I know just the place Rock Lake Range, it would work for Oregon, Idaho, Montana Quote HistoryOriginally Posted By tamboi:
Originally Posted By Dobs013:
Northeast shoot anyone? ....might only be a couple peopleoh yes, Seattle here, and I know just the place Rock Lake Range, it would work for Oregon, Idaho, Montana What's your name, Lieutenant?
|
|
|
|
|
Posted: 1/19/2017 4:07:48 PM EDT
[#38]
Quote HistoryOriginally Posted By ArmedFerret:
What's your name, Lieutenant? Quote HistoryOriginally Posted By ArmedFerret:
Originally Posted By tamboi:
Originally Posted By Dobs013:
Northeast shoot anyone? ....might only be a couple peopleoh yes, Seattle here, and I know just the place Rock Lake Range, it would work for Oregon, Idaho, Montana What's your name, Lieutenant? LMFAO |
|
|
|
MI, USA
|
Posted: 1/19/2017 4:44:18 PM EDT
[Last Edit: AL1EN]
[#39]
Thanks to Samson-dogg for the idea and 69charger for the measurement.
I made a set of my own and i figured id share my .Pdfs with you. Not sure the best way to give you the pdf files so email me if your interested in them. her are some .jpgs of what they look like. the NSN are from the web and the NSN bar code reads the same as the number below it. Also the SN bar code reads 0000000 when scanned. mod 0 
mod 0 suppressor 
mod1 suppressor 
mod1 
|
|
|
USA
|
Posted: 1/19/2017 5:27:11 PM EDT
[#40]
Quote HistoryOriginally Posted By AL1EN:
Thanks to Samson-dogg for the idea and 69charger for the measurement. I made a set of my own and i figured id share my .Pdfs with you. Not sure the best way to give you the pdf files so email me if your interested in them. her are some .jpgs of what they look like. the NSN are from the web and the NSN bar code reads the same ans the number below it. Also the SN bar code reads 0000000 when scanned. mod 0 http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod0_zps3jc34suq.jpg mod 0 suppressor http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod0%20supp_zpsq1izgif8.jpg mod1 suppressor http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod1%20supp_zpss2slhz9q.jpg mod1 http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod1_zps44ttozsp.jpg Email sent. Thanks. |
|
|
|
Posted: 1/19/2017 6:53:20 PM EDT
[#41]
I got my ARMS #22 rings today. Does anyone here still machine off the hump and re-park?
|
|
|
|
|
Posted: 1/19/2017 7:48:51 PM EDT
[#42]
Quote HistoryOriginally Posted By ArpaioFan:
I got my ARMS #22 rings today. Does anyone here still machine off the hump and re-park? |
|
|
|
|
Posted: 1/19/2017 7:58:01 PM EDT
[Last Edit: Samson-Dogg]
[#43]
Quote HistoryOriginally Posted By AL1EN:
Thanks to Samson-dogg for the idea and 69charger for the measurement. I made a set of my own and i figured id share my .Pdfs with you. Not sure the best way to give you the pdf files so email me if your interested in them. her are some .jpgs of what they look like. the NSN are from the web and the NSN bar code reads the same as the number below it. Also the SN bar code reads 0000000 when scanned. mod 0 http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod0_zps3jc34suq.jpg mod 0 suppressor http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod0%20supp_zpsq1izgif8.jpg mod1 suppressor http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod1%20supp_zpss2slhz9q.jpg mod1 http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod1_zps44ttozsp.jpg I like the NAVY label. I didn't even think of that. I may have a long awaited announcement on Saturday. It's looking really good but I won't say anything until I know for sure. I will be addressing the manuals this weekend so as soon as I pick up the labels I can get them mailed. |
|
|
|
USA
|
Posted: 1/19/2017 8:27:31 PM EDT
[#44]
Quote HistoryOriginally Posted By ChrisWMT:
$5 in a cup when with a member. Photo thread: https://c1.staticflickr.com/6/5670/30399678370_b0c4588b16_c.jpg Quote HistoryOriginally Posted By ChrisWMT:
Originally Posted By SDMF_Rebel:
I haven't been down to New Holland in years. Do I have to give them my first born and 20% of my paycheck for the honor of shooting for a couple hours? $5 in a cup when with a member. Photo thread: https://c1.staticflickr.com/6/5670/30399678370_b0c4588b16_c.jpg I'm in!....I'll even bring the cheese and crackers |
|
|
USA
|
Posted: 1/19/2017 8:31:06 PM EDT
[#45]
Quote HistoryOriginally Posted By AL1EN:
Thanks to Samson-dogg for the idea and 69charger for the measurement. I made a set of my own and i figured id share my .Pdfs with you. Not sure the best way to give you the pdf files so email me if your interested in them. her are some .jpgs of what they look like. the NSN are from the web and the NSN bar code reads the same as the number below it. Also the SN bar code reads 0000000 when scanned. mod 0 http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod0_zps3jc34suq.jpg mod 0 suppressor http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod0%20supp_zpsq1izgif8.jpg mod1 suppressor http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod1%20supp_zpss2slhz9q.jpg mod1 http://i1367.photobucket.com/albums/r785/AL1ENDG2/mod1_zps44ttozsp.jpg Nice...great work man! |
|
|
WA, USA
|
Posted: 1/19/2017 8:42:16 PM EDT
[Last Edit: tamboi]
[#46]
Quote HistoryOriginally Posted By ArmedFerret:
What's yo itur name, Lieutenant? Quote HistoryOriginally Posted By ArmedFerret:
Originally Posted By tamboi:
Originally Posted By Dobs013:
Northeast shoot anyone? ....might only be a couple peopleoh yes, Seattle here, and I know just the place Rock Lake Range, it would work for Oregon, Idaho, Montana What's yo itur name, Lieutenant? Guess, I would need to put on my f- glasses, meant to reply to Rubicon's post, I got a laugh out of it |
|
|
|
Posted: 1/19/2017 8:53:02 PM EDT
[#47]
im a member, id be In
Quote HistoryOriginally Posted By ChrisWMT:
Gap, PA - http://www.nhrpc.org/ @SDMF_Rebel you in? |
|
|
|
TX, USA
|
Posted: 1/19/2017 10:44:40 PM EDT
[#48]
Quote HistoryOriginally Posted By Dobs013:
Sweet! Where in PA? I'm in CT so I can pretty much get anywhere in the northeast in a few hours. Quote HistoryOriginally Posted By Dobs013:
Originally Posted By ChrisWMT:
Originally Posted By Dobs013:
Northeast shoot anyone? ....might only be a couple peopleI'm in, club I belong to goes out to 700yd. Sweet! Where in PA? I'm in CT so I can pretty much get anywhere in the northeast in a few hours. I'm in. I have of Sundays, so I can drive out Saturday night when I get out and camp out. Lmk, I'm down. |
|
|
|
Posted: 1/19/2017 10:58:26 PM EDT
[#49]
id camp out.
|
|
|
|
|
Posted: 1/20/2017 12:30:34 AM EDT
[#50]
Early Mod 0 with some stufffffff on it! |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
