User Panel
User Panel
User Panel
OK, USA
|
Posted: 3/28/2016 9:39:00 PM EDT
[#1]
Team wendy rail hack link below
http://www.teamwendy.com/rail-hack-1-wilcox-lanyard/ |
|
|
|
Posted: 3/28/2016 10:45:46 PM EDT
[#2]
Quote HistoryOriginally Posted By Bensplank:
Team wendy rail hack link below http://www.teamwendy.com/rail-hack-1-wilcox-lanyard/ Ha! I did this exact thing to AZCowboys ballistic helmet over a year ago. |
|
|
|
|
Posted: 3/29/2016 1:44:27 PM EDT
[Last Edit: TCBA_Joe]
[#3]
I have to turn in my ACH this weekend, but still have some range days and the Winston P Wilson before I get out. So, I put my ACH cover on my mid-cut ACH.
Yeah, it's the devil camo... JK, I'm not horribly against ACU i situations where concealment doesn't matter at all. 
Doesn't really even look like a mid-cut 
|
|
|
|
FRA
|
Posted: 3/29/2016 5:36:42 PM EDT
[Last Edit: Le_chtit]
[#4]
Here are the different rigs I tried over the years:
I don't use the TC2000 anymore, but keep them anyway. EDIT: don't know why the pic doesn't show up despite the img tags, it works fine in the preview... |
|
|
|
Posted: 3/29/2016 5:46:15 PM EDT
[#5]
DIY BFL flag patch was a success.
   |
|
|
|
|
Posted: 3/29/2016 10:45:10 PM EDT
[#6]
Quote HistoryOriginally Posted By Couch-Commando:
DIY BFL flag patch was a success. http://i50.photobucket.com/albums/f306/ASULeadTrumpet/DSCN2017_zpsscclg2ex.jpg http://i50.photobucket.com/albums/f306/ASULeadTrumpet/DSCN2019_zpsjsp6apiu.jpg http://i50.photobucket.com/albums/f306/ASULeadTrumpet/DSCN2018_zpspxemhgzi.jpg Looks good. I have a few blank cat/ranger eye patches. I'm going to do this when I find time. |
|
|
|
|
Posted: 3/29/2016 11:00:06 PM EDT
[#7]
Quote HistoryOriginally Posted By DirtyHandsRob:
Looks good. I have a few blank cat/ranger eye patches. I'm going to do this when I find time. Quote HistoryOriginally Posted By DirtyHandsRob:
Originally Posted By Couch-Commando:
DIY BFL flag patch was a success. http://i50.photobucket.com/albums/f306/ASULeadTrumpet/DSCN2017_zpsscclg2ex.jpg http://i50.photobucket.com/albums/f306/ASULeadTrumpet/DSCN2019_zpsjsp6apiu.jpg http://i50.photobucket.com/albums/f306/ASULeadTrumpet/DSCN2018_zpspxemhgzi.jpg Looks good. I have a few blank cat/ranger eye patches. I'm going to do this when I find time. Certainly looks a hell of a lot easier to do than messing around with an exacto knife like you, Augee and I
Yours turned out well CC |
|
|
|
|
Posted: 3/30/2016 10:48:05 AM EDT
[#8]
Quote HistoryOriginally Posted By Le_chtit:
Here are the different rigs I tried over the years: http://i129.photobucket.com/albums/p223/Le_chtit/5e450128-29d4-4a9d-b2bb-71fff06d17fe.jpg I don't use the TC2000 anymore, but keep them anyway. EDIT: don't know why the pic doesn't show up despite the img tags, it works fine in the preview... Showing up for me! Nice collection. |
|
|
|
|
Posted: 4/5/2016 10:19:17 AM EDT
[#9]
Same setup, becoming well used. This is what you're left with after running Cola Warrior West in the mud and snow.
|
|
|
|
|
Posted: 4/5/2016 2:23:12 PM EDT
[Last Edit: NoScoE30]
[#10]
Quote HistoryOriginally Posted By MP0117:
Team Wendy Exfil LTP w/ANVIS-9 nods. The PrincetonTec light is a remarkably good IR illuminator despite it's size. 
How are you liking that small side mounted battery pack? I think I made that. |
|
|
|
TX, USA
|
Posted: 4/5/2016 9:19:49 PM EDT
[#11]
|
|
|
|
Posted: 4/6/2016 12:01:41 AM EDT
[#12]
Quote HistoryOriginally Posted By TannerB:
<a href="https://flic.kr/p/F6hX6m" target="_blank">https://farm2.staticflickr.com/1509/25657803554_bd7a7aaf80_z.jpg</a>20160404_160046-01 by T B, on Flickr Nice rigs |
|
|
|
|
Posted: 4/8/2016 1:39:40 PM EDT
[#13]
|
|
|
|
|
Posted: 4/8/2016 1:41:12 PM EDT
[#14]
Quote HistoryOriginally Posted By TNVC:
http://img.photobucket.com/albums/v621/Clutch99/Happy%20Friday_zpsvsus8v0v.jpg Right to arm bears shall not be infringed! |
|
|
|
|
Posted: 4/8/2016 2:17:09 PM EDT
[#15]
|
|
|
|
|
Posted: 4/8/2016 6:19:58 PM EDT
[#16]
|
|
|
|
|
Posted: 4/9/2016 6:42:05 PM EDT
[#17]
Quote HistoryOriginally Posted By SoloDallas:
<a href="https://flic.kr/p/G4VuSk" target="_blank">https://farm2.staticflickr.com/1556/26298658255_f733562041_h.jpg</a> Block The Block by SoloDallas, on Flickr 
(never enough; it's never enough) I'll be in my bunk 
|
|
|
|
USA
|
Posted: 4/9/2016 7:57:34 PM EDT
[Last Edit: PineappleDevil]
[#18]
Quote HistoryOriginally Posted By SkyPup:
http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Helmet%20Front.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Helmet%20Side.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20INVG.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Selfie.jpg How do you like the little black ir light from battery junction? |
|
|
TN, USA
|
Posted: 4/9/2016 10:53:17 PM EDT
[#19]
Quote HistoryOriginally Posted By NoScoE30:
How are you liking that small side mounted battery pack? I think I made that. Quote HistoryOriginally Posted By NoScoE30:
Originally Posted By MP0117:
Team Wendy Exfil LTP w/ANVIS-9 nods. The PrincetonTec light is a remarkably good IR illuminator despite it's size. http://i874.photobucket.com/albums/ab302/MP0117/IMG_9230_zpsx4s2hl8q.jpg How are you liking that small side mounted battery pack? I think I made that. Love it! |
|
|
|
Posted: 4/10/2016 8:00:41 AM EDT
[Last Edit: SkyPup]
[#20]
Quote HistoryOriginally Posted By PineappleDevil:
Quote HistoryOriginally Posted By PineappleDevil:
Originally Posted By SkyPup:
http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Helmet%20Front.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Helmet%20Side.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20INVG.jpg How do you like the little black ir light from battery junction? http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Selfie.jpg That is an EagleTac 3.4 Watt 850nm IR, very bright on low, on high it overpowers my PVS-14. The Princeton Tec IR is great for close up out 50 feet. The tiny 850 IR from Battery Junction is as powerful as the Princeton Tec too... |
|
|
|
|
Posted: 4/10/2016 1:51:04 PM EDT
[Last Edit: DallasLooterShooter]
[#21]
Quote HistoryOriginally Posted By SkyPup:
That is an EagleTac 3.4 Watt 850nm IR, very bright on low, on high it overpowers my PVS-14. The Princeton Tec IR is great for close up out 50 feet. The tiny 850 IR from Battery Junction is as powerful as the Princeton Tec too... Quote HistoryOriginally Posted By SkyPup:
Originally Posted By PineappleDevil:
Originally Posted By SkyPup:
http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Helmet%20Front.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Helmet%20Side.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20INVG.jpg How do you like the little black ir light from battery junction? http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Selfie.jpg That is an EagleTac 3.4 Watt 850nm IR, very bright on low, on high it overpowers my PVS-14. The Princeton Tec IR is great for close up out 50 feet. The tiny 850 IR from Battery Junction is as powerful as the Princeton Tec too... For anyone interested in a good helmet mounted illuminator: for the last 6-7 years I've been running a Solarforce L2P host with a P60 IR single mode drop in. Total setup cost me about $40 and it is a great combination of throw and flood. It also runs on an 18650 battery so you don't have to worry about burning through CR123 primaries. http://www.ebay.com/itm/Solarforce-L2P-GREY-HAIII-Forward-Clicky-flashlight-Body-Version-2011-/311525956021?hash=item488864d9b5:m:mE3NU_0my1NTGLYJhwAlJRA http://www.ebay.com/itm/Infrared-IR-Nighvision-Flashlight-Bulb-LED-Upgrade-1Mode-Drop-in-P6-P60-Surefire-/221411777190?hash=item338d2b9aa6:g:UX8AAOxyeZNTQqYQ |
|
|
|
NV, USA
|
Posted: 4/13/2016 3:11:46 AM EDT
[#22]
Quote HistoryOriginally Posted By SkyPup:
http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Helmet%20Front.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Helmet%20Side.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20INVG.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Selfie.jpg Wholly molly thats some serious OCD right thar! |
|
|
|
Posted: 4/13/2016 5:23:34 PM EDT
[Last Edit: SkyPup]
[#23]
That FLIR M-24 640 core detects more hogs than anything else I own, and that is saying something since I own a considerable amount of gear....it is also the most well designed ergonomic to operate thermal head mount system with automatic shutter too!
|
|
|
|
PA, USA
|
Posted: 4/14/2016 9:37:09 PM EDT
[#24]
|
|
|
|
Posted: 4/15/2016 5:03:22 PM EDT
[#25]
Quote HistoryOriginally Posted By TNVC:
http://img.photobucket.com/albums/v621/Clutch99/Happy%20Friday_zpsvsus8v0v.jpg Bears with NOD? Game over man! Game over! |
|
|
|
|
Posted: 4/15/2016 5:04:18 PM EDT
[#26]
Quote HistoryOriginally Posted By Caeser2001:
<a href="http://s1281.photobucket.com/user/Caeser001/media/Mobile%20Uploads/IMG_20160414_210613133_zpsftrqizjz.jpg.html" target="_blank">http://i1281.photobucket.com/albums/a501/Caeser001/Mobile%20Uploads/IMG_20160414_210613133_zpsftrqizjz.jpg</a> Love the HELSTAR.... |
|
|
|
|
Posted: 4/15/2016 9:49:01 PM EDT
[#27]
I found a vendor on amazon that sells IR Flag patches for $8.99
I got one and they are legit. Gonna order another one for the bag. |
|
|
|
|
Posted: 4/16/2016 11:37:27 AM EDT
[#28]
Quote HistoryOriginally Posted By SkyPup:
http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Helmet%20Front.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Helmet%20Side.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20INVG.jpg http://www.phossil.com/thom/Night%20Vision/FLIR%20M24/M24%20Selfie.jpg Nice, Spartan, functional and simple. I like it. |
|
|
|
|
Posted: 4/16/2016 3:51:13 PM EDT
[#29]
|
|
|
|
|
Posted: 4/16/2016 4:27:35 PM EDT
[#30]
Quote HistoryOriginally Posted By fulautotank:
<a href="http://s449.photobucket.com/user/KAB12869/media/20160416_153713.jpg.html" target="_blank">http://i449.photobucket.com/albums/qq212/KAB12869/20160416_153713.jpg</a>
Is sex |
|
|
|
DNK
|
Posted: 4/17/2016 2:58:14 AM EDT
[Last Edit: HDS]
[#31]
I might be wrong, but isn't the left unit suppose to mounted with the other way around?, So the battery compartment faces the other way.
Quote HistoryOriginally Posted By fulautotank:
a href="http://s449.photobucket.com/user/KAB12869/media/20160416_153713.jpg.html" target="_blank">http://i449.photobucket.com/albums/qq212/KAB12869/20160416_153713.jpg</a> |
|
|
TX, USA
|
Posted: 4/17/2016 7:38:11 AM EDT
[Last Edit: night9]
[#32]
Quote HistoryOriginally Posted By HDS:
I might be wrong, but isn't the left unit suppose to mounted with the other way around?, So the battery compartment faces the other way. Quote HistoryOriginally Posted By HDS:
I might be wrong, but isn't the left unit suppose to mounted with the other way around?, So the battery compartment faces the other way. Originally Posted By fulautotank:
a href="http://s449.photobucket.com/user/KAB12869/media/20160416_153713.jpg.html" target="_blank">http://i449.photobucket.com/albums/qq212/KAB12869/20160416_153713.jpg</a> You'd be looking at the wrong side of the tube unless there were another mount point on the bottom of the MUM |
|
|
|
Posted: 4/17/2016 11:04:16 AM EDT
[#33]
I've always liked dual MUM's.
|
|
|
|
|
Posted: 4/17/2016 11:07:18 AM EDT
[#34]
Quote HistoryOriginally Posted By night9:
You'd be looking at the wrong side of the tube unless there were another mount point on the bottom of the MUM Quote HistoryOriginally Posted By night9:
Originally Posted By HDS:
I might be wrong, but isn't the left unit suppose to mounted with the other way around?, So the battery compartment faces the other way. Originally Posted By fulautotank:
a href="http://s449.photobucket.com/user/KAB12869/media/20160416_153713.jpg.html" target="_blank">http://i449.photobucket.com/albums/qq212/KAB12869/20160416_153713.jpg</a> You'd be looking at the wrong side of the tube unless there were another mount point on the bottom of the MUM MUM14s have 2 mount points. |
|
|
|
|
Posted: 4/17/2016 12:03:10 PM EDT
[#35]
Quote HistoryOriginally Posted By lilMAC25:
MUM14s have 2 mount points. Quote HistoryOriginally Posted By lilMAC25:
Originally Posted By night9:
Originally Posted By HDS:
I might be wrong, but isn't the left unit suppose to mounted with the other way around?, So the battery compartment faces the other way. Originally Posted By fulautotank:
a href="http://s449.photobucket.com/user/KAB12869/media/20160416_153713.jpg.html" target="_blank">http://i449.photobucket.com/albums/qq212/KAB12869/20160416_153713.jpg</a> You'd be looking at the wrong side of the tube unless there were another mount point on the bottom of the MUM MUM14s have 2 mount points. It did work better when I flipped the left one over. Just got the second MUM yesterday
|
|
|
|
|
Posted: 4/17/2016 9:27:07 PM EDT
[#36]
Quote HistoryOriginally Posted By fulautotank:
It did work better when I flipped the left one over. Just got the second MUM yesterday
Quote HistoryOriginally Posted By fulautotank:
Originally Posted By lilMAC25:
Originally Posted By night9:
Originally Posted By HDS:
I might be wrong, but isn't the left unit suppose to mounted with the other way around?, So the battery compartment faces the other way. Originally Posted By fulautotank:
a href="http://s449.photobucket.com/user/KAB12869/media/20160416_153713.jpg.html" target="_blank">http://i449.photobucket.com/albums/qq212/KAB12869/20160416_153713.jpg</a> You'd be looking at the wrong side of the tube unless there were another mount point on the bottom of the MUM MUM14s have 2 mount points. It did work better when I flipped the left one over. Just got the second MUM yesterday
I wasn't knocking you. I'm just insanely jealous! |
|
|
|
|
Posted: 4/19/2016 10:01:13 PM EDT
[Last Edit: fulautotank]
[#37]
All good, never thought you were knocking me.
More pics 
|
|
|
|
|
Posted: 4/19/2016 10:41:13 PM EDT
[#38]
Over $1200 in mounts.
I has envy |
|
|
|
|
Posted: 4/19/2016 11:06:37 PM EDT
[#39]
I really need to get an NV helmet setup. Very jelous
|
|
|
|
VA, USA
|
Posted: 4/20/2016 2:45:47 PM EDT
[#40]
So I wanted to come to the source and ask you guys, I just picked up a MICH 2000 for 100.00 and am pretty pleased with it, but have had a hard time finding non air soft rails and accessories? Is there any good places that I can look for some rails that will fit? And what accessories do you guys recommend?
From what little I have been able to find I have a few ideas on what I want, but I would appreciate some advice for experienced users. I want to eventually get an NVG setup but that's in the future. For now I'm somewhat just looking for a rail, and a mount, and a light to run on it. I have been looking at: Palanx Marsoc/ warfighter shroud. Norotos one and three Go pro mount TNVC's model. Ops core VAS shroud. Am on on the right track or is there a better option out there? 
|
|
|
|
Posted: 4/20/2016 4:02:02 PM EDT
[Last Edit: TCBA_Joe]
[#41]
I've had the universal shroud, the opscore VAS, and the Wilcox L4 3-hole.
No idea what the Go-Pro mount is, and I'd skip the airsoft one you listed. Of the 3 the VAS was my least favorite. I felt it didn't seat any setting and I had well; there was a lot of wobble. The Norotos is nice, although I've seen a ton of broken ones (although that's probably only because I've seen more of them than the others by far). It's got some rubber that puts tension on the swing an so there's no play or wobble. It is the most expensive. My favorite is the Wilcox L4 3-hole. It's got rubber tensioning like the universal, is skeletonized like the VAS, and isn't nearly as expensive as the Norotos. ETA: is this the Go-Pro mount you're talking about? This isn't a nod mount, it's the adapter that let's the Go-Pro to mount on nvg shrouds. https://tnvc.com/shop/gopro-nvg-mount/ |
|
|
|
VA, USA
|
Posted: 4/20/2016 8:25:12 PM EDT
[#42]
Quote HistoryOriginally Posted By TCBA_Joe:
I've had the universal shroud, the opscore VAS, and the Wilcox L4 3-hole. No idea what the Go-Pro mount is, and I'd skip the airsoft one you listed. Of the 3 the VAS was my least favorite. I felt it didn't seat any setting and I had well; there was a lot of wobble. The Norotos is nice, although I've seen a ton of broken ones (although that's probably only because I've seen more of them than the others by far). It's got some rubber that puts tension on the swing an so there's no play or wobble. It is the most expensive. My favorite is the Wilcox L4 3-hole. It's got rubber tensioning like the universal, is skeletonized like the VAS, and isn't nearly as expensive as the Norotos. ETA: is this the Go-Pro mount you're talking about? This isn't a nod mount, it's the adapter that let's the Go-Pro to mount on nvg shrouds. https://tnvc.com/shop/gopro-nvg-mount/ Awesome, I'll definitely check them out. And yes, that's the one I was looking at, I stumbled on it looking at different shrouds and figure since I already own a Go-Pro why not. It could make for some interesting footage. I have been looking at different sites trying to find the best price I could order it all from, do you guys have any recommendations? The Ops core site seems a little steep and I'm not above going with used stuff for the time being? |
|
|
|
Posted: 4/21/2016 1:26:11 PM EDT
[#43]
Quote HistoryOriginally Posted By Seatbelts:
Awesome, I'll definitely check them out. And yes, that's the one I was looking at, I stumbled on it looking at different shrouds and figure since I already own a Go-Pro why not. It could make for some interesting footage. I have been looking at different sites trying to find the best price I could order it all from, do you guys have any recommendations? The Ops core site seems a little steep and I'm not above going with used stuff for the time being? Quote HistoryOriginally Posted By Seatbelts:
Originally Posted By TCBA_Joe:
I've had the universal shroud, the opscore VAS, and the Wilcox L4 3-hole. No idea what the Go-Pro mount is, and I'd skip the airsoft one you listed. Of the 3 the VAS was my least favorite. I felt it didn't seat any setting and I had well; there was a lot of wobble. The Norotos is nice, although I've seen a ton of broken ones (although that's probably only because I've seen more of them than the others by far). It's got some rubber that puts tension on the swing an so there's no play or wobble. It is the most expensive. My favorite is the Wilcox L4 3-hole. It's got rubber tensioning like the universal, is skeletonized like the VAS, and isn't nearly as expensive as the Norotos. ETA: is this the Go-Pro mount you're talking about? This isn't a nod mount, it's the adapter that let's the Go-Pro to mount on nvg shrouds. https://tnvc.com/shop/gopro-nvg-mount/ Awesome, I'll definitely check them out. And yes, that's the one I was looking at, I stumbled on it looking at different shrouds and figure since I already own a Go-Pro why not. It could make for some interesting footage. I have been looking at different sites trying to find the best price I could order it all from, do you guys have any recommendations? The Ops core site seems a little steep and I'm not above going with used stuff for the time being? Yeah, I'd get the Go-Pro mount, just be aware that the shroud on the helmet in that photo is just a stock Ops Core VAS, the GoPro adapter just locks into it so you'll need to get a NV mount anyways. I'd buy from TNVC; they sell all 3 shrouds and you know they're not airsoft fakes. I was issued the Norotos, but I bought the VAS and L4 off the EE here. |
|
|
|
|
Posted: 4/21/2016 5:08:47 PM EDT
[#44]
Quote HistoryOriginally Posted By Seatbelts:
So I wanted to come to the source and ask you guys, I just picked up a MICH 2000 for 100.00 and am pretty pleased with it, but have had a hard time finding non air soft rails and accessories? Is there any good places that I can look for some rails that will fit? And what accessories do you guys recommend? From what little I have been able to find I have a few ideas on what I want, but I would appreciate some advice for experienced users. I want to eventually get an NVG setup but that's in the future. For now I'm somewhat just looking for a rail, and a mount, and a light to run on it. I have been looking at: Palanx Marsoc/ warfighter shroud. Norotos one and three Go pro mount TNVC's model. Ops core VAS shroud. Am on on the right track or is there a better option out there? http://i367.photobucket.com/albums/oo117/mattfukoseatbelts/Gear%20Porn/f9029f17-2270-43b7-b9c3-90ca3c7ad73b.jpg http://i367.photobucket.com/albums/oo117/mattfukoseatbelts/Gear%20Porn/59f1ab2e-c615-49f9-a64e-8c0313c2a706.jpg I finished building up an ACH last year, now am slowly putting money aside for NODs. I went with the Revision Batlskin front mount and rails. I couldn't find much info on them, but I liked how the front mount and rails all tie together to make a sturdy 3-point mounting platform for a 1-hole helmet. I don't know if anyone else here has tried these out, but they seem solid. I just need to get enough extra money set aside for that PVS-14 now. |
|
|
|
|
Posted: 4/21/2016 5:57:56 PM EDT
[#45]
Quote HistoryOriginally Posted By Mabuz:
I finished building up an ACH last year, now am slowly putting money aside for NODs. I went with the Revision Batlskin front mount and rails. I couldn't find much info on them, but I liked how the front mount and rails all tie together to make a sturdy 3-point mounting platform for a 1-hole helmet. I don't know if anyone else here has tried these out, but they seem solid. I just need to get enough extra money set aside for that PVS-14 now. Quote HistoryOriginally Posted By Mabuz:
Originally Posted By Seatbelts:
So I wanted to come to the source and ask you guys, I just picked up a MICH 2000 for 100.00 and am pretty pleased with it, but have had a hard time finding non air soft rails and accessories? Is there any good places that I can look for some rails that will fit? And what accessories do you guys recommend? From what little I have been able to find I have a few ideas on what I want, but I would appreciate some advice for experienced users. I want to eventually get an NVG setup but that's in the future. For now I'm somewhat just looking for a rail, and a mount, and a light to run on it. I have been looking at: Palanx Marsoc/ warfighter shroud. Norotos one and three Go pro mount TNVC's model. Ops core VAS shroud. Am on on the right track or is there a better option out there? http://i367.photobucket.com/albums/oo117/mattfukoseatbelts/Gear%20Porn/f9029f17-2270-43b7-b9c3-90ca3c7ad73b.jpg http://i367.photobucket.com/albums/oo117/mattfukoseatbelts/Gear%20Porn/59f1ab2e-c615-49f9-a64e-8c0313c2a706.jpg I finished building up an ACH last year, now am slowly putting money aside for NODs. I went with the Revision Batlskin front mount and rails. I couldn't find much info on them, but I liked how the front mount and rails all tie together to make a sturdy 3-point mounting platform for a 1-hole helmet. I don't know if anyone else here has tried these out, but they seem solid. I just need to get enough extra money set aside for that PVS-14 now. Except his is a 3-hole helmet. |
|
|
|
|
Posted: 4/22/2016 11:00:21 AM EDT
[#46]
Quote HistoryOriginally Posted By TCBA_Joe:
Except his is a 3-hole helmet. Quote HistoryOriginally Posted By TCBA_Joe:
Originally Posted By Mabuz:
Originally Posted By Seatbelts:
So I wanted to come to the source and ask you guys, I just picked up a MICH 2000 for 100.00 and am pretty pleased with it, but have had a hard time finding non air soft rails and accessories? Is there any good places that I can look for some rails that will fit? And what accessories do you guys recommend? From what little I have been able to find I have a few ideas on what I want, but I would appreciate some advice for experienced users. I want to eventually get an NVG setup but that's in the future. For now I'm somewhat just looking for a rail, and a mount, and a light to run on it. I have been looking at: Palanx Marsoc/ warfighter shroud. Norotos one and three Go pro mount TNVC's model. Ops core VAS shroud. Am on on the right track or is there a better option out there? http://i367.photobucket.com/albums/oo117/mattfukoseatbelts/Gear%20Porn/f9029f17-2270-43b7-b9c3-90ca3c7ad73b.jpg http://i367.photobucket.com/albums/oo117/mattfukoseatbelts/Gear%20Porn/59f1ab2e-c615-49f9-a64e-8c0313c2a706.jpg I finished building up an ACH last year, now am slowly putting money aside for NODs. I went with the Revision Batlskin front mount and rails. I couldn't find much info on them, but I liked how the front mount and rails all tie together to make a sturdy 3-point mounting platform for a 1-hole helmet. I don't know if anyone else here has tried these out, but they seem solid. I just need to get enough extra money set aside for that PVS-14 now. Except his is a 3-hole helmet. Right you are...didn't notice that detail in the pics. I just figured a standard ACH is typically 1 hole vs 3. |
|
|
|
VA, USA
|
Posted: 4/25/2016 8:45:46 AM EDT
[Last Edit: EODcrawler]
[#47]
Well, here it is. Simple and effective. Eventually this will have some binos, Wilcox G24, and HELSTAR.
The Scout is borrowed from my 300Blk to see how I like it. I have a dedicated IR only light but have to find the right MLok mount for it. Does anyone know if Surefire makes an only IR head for the Scout? I'd like to pick up one to put on an Arisaka body.  </a>" />
 </a>" />
|
|
|
USA
|
Posted: 4/25/2016 10:16:47 AM EDT
[#48]
Quote HistoryOriginally Posted By EODcrawler:
Well, here it is. Simple and effective. Eventually this will have some binos, Wilcox G24, and HELSTAR. The Scout is borrowed from my 300Blk to see how I like it. I have a dedicated IR only light but have to find the right MLok mount for it. Does anyone know if Surefire makes an only IR head for the Scout? I'd like to pic up one to put on an Arisaka body. http://<a href=http://i1068.photobucket.com/albums/u444/EODcrawler/image4_zpsknihrhms.jpeg</a>" /> http://<a href=http://i1068.photobucket.com/albums/u444/EODcrawler/image5_zps78whpvrd.jpeg</a>" /> Where did you snag those battery holders from? |
|
|
VA, USA
|
Posted: 4/25/2016 11:04:24 AM EDT
[Last Edit: EODcrawler]
[#49]
Quote HistoryWhere did you snag those battery holders from? It's just a shotgun shell scabbard. Using the top spots for batteries and the black cylinders are some lead rod that I wrapped with electrical tape for use as a counterweight. I've got more made up to change the weight as needed. I think I got the scabbard off of Amazon. Had it for a while and just got a wide hair to try something. I like it and works really well for my application. (ETA) I just realized my flag is upside down. When I get home, I'll pull my head out of my ass and fix it. |
|
|
|
Posted: 4/25/2016 5:09:16 PM EDT
[#50]
Quote HistoryOriginally Posted By EODcrawler:
Well, here it is. Simple and effective. Eventually this will have some binos, Wilcox G24, and HELSTAR. The Scout is borrowed from my 300Blk to see how I like it. I have a dedicated IR only light but have to find the right MLok mount for it. Does anyone know if Surefire makes an only IR head for the Scout? I'd like to pick up one to put on an Arisaka body. http://<a href=http://i1068.photobucket.com/albums/u444/EODcrawler/image4_zpsknihrhms.jpeg</a>" /> http://<a href=http://i1068.photobucket.com/albums/u444/EODcrawler/image5_zps78whpvrd.jpeg</a>" /> http://m.ebay.com/itm/221411777190?_mwBanner=1 |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
