User Panel
User Panel
User Panel
|
Posted: 4/26/2011 6:06:04 PM EDT
[#1]
Quoted:
What Rail system is this?? http://img402.imageshack.us/img402/5011/800pxafghanborderpolice.jpg This is/was made by the israelis. Either Mako or caa/ema I cant remember which co. it was but it was one of those 2. I happen to like most of their products. I guess they had some bad customer relations for awhile, but I think they make some excellent items. JMHO |
|
|
|
Posted: 4/26/2011 9:49:45 PM EDT
[#2]
Quoted:
Quoted:
What Rail system is this?? http://img402.imageshack.us/img402/5011/800pxafghanborderpolice.jpg This is/was made by the israelis. Either Mako or caa/ema I cant remember which co. it was but it was one of those 2. I happen to like most of their products. I guess they had some bad customer relations for awhile, but I think they make some excellent items. JMHO Command Arms XRS-47 |
|
|
|
Posted: 4/29/2011 3:53:23 AM EDT
[#3]
Here is the current military version - simpler and cleaner than the previous versions, with a better return to zero. Cleaning rod can still be installed. Designed to adjust to variations in different AK construction to require no adjustment or fitting on most weapons.
   |
|
|
|
Posted: 5/14/2011 1:24:20 AM EDT
[#4]
|
|
|
|
Posted: 5/14/2011 7:31:01 AM EDT
[#5]
Why would you post that?
|
|
|
|
Posted: 5/14/2011 2:05:27 PM EDT
[#6]
Why not? It contains a Hungarian SA85. It's certainly a ridiculous photo.
Does it belong in the 'AKs in action' thread? |
|
|
|
Posted: 5/14/2011 3:55:20 PM EDT
[#7]
Quoted:
Why not? It contains a Hungarian SA85. It's certainly a ridiculous photo. Does it belong in the 'AKs in action' thread? YES! DO IT! |
|
|
|
Posted: 5/15/2011 11:53:13 PM EDT
[#8]
Where did Phucknstein get an AK? That is sacrilege!!!
|
|
|
|
Posted: 5/15/2011 11:55:18 PM EDT
[#9]
And look at those liberal KLOWNS in the background, they look like they are scared chitless!!
|
|
|
|
Posted: 5/16/2011 12:49:53 AM EDT
[#10]
Quoted:
And look at those liberal KLOWNS in the background, they look like they are scared chitless!! bitch has her finger on the trigger, i would be too |
|
|
|
Posted: 5/19/2011 4:39:47 PM EDT
[#11]
My Hungarians
AK-55 matching #s kit on Arsenal SLR95 takeoff receiver TGI AMD65 CAI AMD65 |
|
|
|
Posted: 5/26/2011 11:49:46 PM EDT
[#12]
Here's one I built almost 7 years ago, screw/weld build (I know, I know):
This was back when good parts kits were $85 or so, and came with original barrels. It cost maybe $200 total to build, including the appropriate number of US parts- US receiver, brake, handguard, grip, magazine. Unfortunately I sold it because I had a project car that needed an engine, I'm looking for another one now. |
|
|
|
Posted: 5/27/2011 12:47:10 AM EDT
[#13]
|
|
|
|
Posted: 6/6/2011 12:03:20 AM EDT
[#14]
 AKM-63 with ultimak, aimpoint ml2 and vickers sling. |
|
|
|
Posted: 6/19/2011 1:24:17 AM EDT
[#15]
Quoted:
...Unfortunately I sold it because I had a project car that needed an engine, I'm looking for another one now. I finally got another one yesterday. 
|
|
|
|
Posted: 6/21/2011 6:01:41 PM EDT
[#16]
Before
After 
No mag wobble at all. In fact this beast is TIGHT. I have to file a tad off the magazine tab to fit. Considering throwing a Texas Weapons Systems Dogleg Scope Rail on top. Already have a US Palm grip on the way. |
|
|
|
Posted: 7/17/2011 3:54:09 PM EDT
[#17]
I finally finished the IWD stock set for my AK-55 parts kit built on a Firing Line type III receiver...
BEFORE 
AFTER 
It is a IWD Beech type III stock set finished with Watco "Natural" Danish Oil. |
|
|
|
Posted: 8/12/2011 10:50:00 PM EDT
[#18]
Quoted: Before http://i32.photobucket.com/albums/d23/johndal21/Weapons/Whereat002.jpg After http://i32.photobucket.com/albums/d23/johndal21/Weapons/Whereat023.jpg No mag wobble at all. In fact this beast is TIGHT. I have to file a tad off the magazine tab to fit. Considering throwing a Texas Weapons Systems Dogleg Scope Rail on top. Already have a US Palm grip on the way. how the hell did you get that stock? |
|
|
|
Posted: 8/14/2011 4:43:42 PM EDT
[#19]
Standard ACE 7.5" Skeleton stock attached to a Krebs AMD Adaptor. The finished rifle. I ran Primary Arms RD on it for a bit and decided to go with the Aimpoint T1. I have been going back and forth with a 1x4 SS scope. Link below is a thread on the topic.
http://www.ar15.com/forums/t_4_77/130633_New_Krebs_AMD_65_rear_stock_adapter__looks_sweet_.html 
|
|
|
|
Posted: 8/19/2011 7:32:44 PM EDT
[#20]
Quoted:
Standard ACE 7.5" Skeleton stock attached to a Krebs AMD Adaptor. The finished rifle. I ran Primary Arms RD on it for a bit and decided to go with the Aimpoint T1. I have been going back and forth with a 1x4 SS scope. Link below is a thread on the topic. http://www.ar15.com/forums/t_4_77/130633_New_Krebs_AMD_65_rear_stock_adapter__looks_sweet_.html http://i32.photobucket.com/albums/d23/johndal21/Weapons/send002.jpg what rail is that? me likes |
|
|
|
Posted: 8/19/2011 10:51:05 PM EDT
[#21]
Quoted:
Quoted:
Standard ACE 7.5" Skeleton stock attached to a Krebs AMD Adaptor. The finished rifle. I ran Primary Arms RD on it for a bit and decided to go with the Aimpoint T1. I have been going back and forth with a 1x4 SS scope. Link below is a thread on the topic. http://www.ar15.com/forums/t_4_77/130633_New_Krebs_AMD_65_rear_stock_adapter__looks_sweet_.html http://i32.photobucket.com/albums/d23/johndal21/Weapons/send002.jpg what rail is that? me likes Texas Weapon Systems, links below with two sources... http://www.onesourcetactical.com/kalashnikovriflescoperailtopcoverdoglegscoperailgen-2.aspx http://texasweaponsystems.com/ |
|
|
|
Posted: 9/19/2011 12:18:39 PM EDT
[#22]
Call me crazy but, I've always liked the looks of the AMD. Had read a few things about the builds from TGI, some good, some not so good. At any rate, I took a chance and ordered one from Centerfire. The gun seems to have been better built than some I've read about. The point at which the folder is attached is cleanly cut but there is some exposed metal showing. No biggy. The button that releases the stock is very stiff. I added one of the stock attachments from AMD Tech and that will be helpful with cheek weld. Before I added this attachment, a nose weld was the best I could achieve.
Anyway, nothing special about this gun except it's mine. If it's reasonably accurate and 100% reliable, I'll have what I expected to have. One thing I dislike about this gun is that TGI used a Tapco magazine to count as three U.S. parts and the G2 trigger group ans the other three parts. This means, to use a better magazine, I'll have to add three U.S. parts and beyond the pistol grip, things get rataher dicey for a putz like me. http://i52.photobucket.com/albums/g21/WhiteWillie/AMD2.jpg http://i52.photobucket.com/albums/g21/WhiteWillie/AMD1.jpg |
|
|
|
Posted: 11/6/2011 9:43:00 PM EDT
[#23]
Quoted:
Call me crazy but, I've always liked the looks of the AMD. Had read a few things about the builds from TGI, some good, some not so good. At any rate, I took a chance and ordered one from Centerfire. The gun seems to have been better built than some I've read about. The point at which the folder is attached is cleanly cut but there is some exposed metal showing. No biggy. The button that releases the stock is very stiff. I added one of the stock attachments from AMD Tech and that will be helpful with cheek weld. Before I added this attachment, a nose weld was the best I could achieve. Anyway, nothing special about this gun except it's mine. If it's reasonably accurate and 100% reliable, I'll have what I expected to have. One thing I dislike about this gun is that TGI used a Tapco magazine to count as three U.S. parts and the G2 trigger group ans the other three parts. This means, to use a better magazine, I'll have to add three U.S. parts and beyond the pistol grip, things get rataher dicey for a putz like me. http://i52.photobucket.com/albums/g21/WhiteWillie/AMD2.jpg http://i52.photobucket.com/albums/g21/WhiteWillie/AMD1.jpg mine came with a pro mag |
|
|
|
Posted: 11/9/2011 5:43:18 PM EDT
[#24]
Quoted:
Here is the current military version - simpler and cleaner than the previous versions, with a better return to zero. Cleaning rod can still be installed. Designed to adjust to variations in different AK construction to require no adjustment or fitting on most weapons. http://www.ar15.com/media/viewFile.html?i=27736 http://www.themakogroup.com/v/vspfiles/photos/VFR-AK-2.jpghttp://www.ar15.com/media/viewFile.html?i=27734
How come some of these have two screws on the side by the rear sight block while others do not? I noticed the ones without the two screws don't allow for a cleaning rod to be accepted because I assume after watching an install video that you have two screws on the bottom that push up against the barrel to tighten everyrthing down. It seems the website you linked is selling the older version. Any picture of one of these on an AMD 65 with the cleaning rod in place? Also, how come these weren't designed to be used with underfolder or even standard Russian style left hand sidefolding stocks? |
|
|
|
Posted: 11/12/2011 10:42:06 PM EDT
[#25]
My AMD 65. I found this bakelite forearm in a parts bin and with a tiny bit of work , popped right in place.
Whatya think? 
|
|
|
|
Posted: 11/13/2011 3:39:28 AM EDT
[#26]
I'd say she is final....been through a lot.
|
|
|
|
Posted: 11/13/2011 10:54:09 AM EDT
[#27]
Very nice!
|
|
|
|
Posted: 12/22/2011 7:56:54 PM EDT
[#28]
mine.
added otk plum grips 
|
|
|
|
Posted: 1/16/2012 5:22:29 PM EDT
[#29]
Quoted:
http://i871.photobucket.com/albums/ab274/tx318/010.jpg what sight leaf is this tx318? in a couple weeks i will have my amd-63 being built at the moment on a FEG receiver to show off 
|
|
|
|
Posted: 1/16/2012 8:09:34 PM EDT
[#30]
|
|
|
|
Posted: 1/18/2012 9:29:41 PM EDT
[#31]
|
|
|
|
Posted: 2/8/2012 5:49:26 PM EDT
[#32]
|
|
|
|
Posted: 2/13/2012 6:13:32 PM EDT
[#33]
Quoted:
My AKM http://i1224.photobucket.com/albums/ee371/hill5673/IMAG0340.jpg http://i1224.photobucket.com/albums/ee371/hill5673/IMAG0341.jpg http://i1224.photobucket.com/albums/ee371/hill5673/IMAG0342.jpg If you ever sell that one, please come back to this page, get my username, and look me up. All I can say at this point is DAYYUM! And here is a couple of mine. A TGI AMD which may be one of my best shooters. http://i1207.photobucket.com/albums/bb473/Donaldbrooks/e29ccd4b.jpg And an AKM63, built by dallasmoore of the AK Forum and The AK Files. It's a premium build by a stand up guy. http://i1207.photobucket.com/albums/bb473/Donaldbrooks/b25d76f5.jpg |
|
|
|
Posted: 2/14/2012 7:53:58 PM EDT
[#34]
Bone Stock FEG build.
Looking to make some wood grips for her.... 
|
|
|
|
Posted: 2/16/2012 6:07:34 PM EDT
[#35]
And an AKM63, built by dallasmoore of the AK Forum and The AK Files. It's a premium build by a stand up guy.
http://i1207.photobucket.com/albums/bb473/Donaldbrooks/b25d76f5.jpg[/quote] awesome rifle!! i love the akm63 i cannot wait to get mine your looks great! did you keep the kit in original finish or have the entire gun refinished? |
|
|
|
Posted: 2/20/2012 10:28:27 PM EDT
[#36]
Quoted:
And an AKM63, built by dallasmoore of the AK Forum and The AK Files. It's a premium build by a stand up guy. http://i1207.photobucket.com/albums/bb473/Donaldbrooks/b25d76f5.jpg awesome rifle!! i love the akm63 i cannot wait to get mine your looks great! did you keep the kit in original finish or have the entire gun refinished?[/quote] Thank you. I love those too. I would have to ask him to be sure but the finish was perfect so I doubt he sprayed more than the receiver. It's one of my favorites. After seeing that Kassnar import just a few posts up, I had to get in gear on this kit. I just finished it Saturday. http://i1207.photobucket.com/albums/bb473/Donaldbrooks/b0bd2a75.jpg And a group shot. http://i1207.photobucket.com/albums/bb473/Donaldbrooks/028a13cc.jpg |
|
|
|
Posted: 2/20/2012 11:03:17 PM EDT
[#37]
|
|
|
|
Posted: 2/24/2012 2:08:19 PM EDT
[#38]
Quoted:
I'd say she is final....been through a lot. http://i32.photobucket.com/albums/d23/johndal21/Weapons/ak007.jpg What stock and adapter did you use? |
|
|
|
Posted: 3/9/2012 7:38:22 PM EDT
[#39]
|
|
|
|
Posted: 3/11/2012 7:47:30 PM EDT
[#40]
What hand guard system is on Blackwind's AMD ?
|
|
|
|
Posted: 3/11/2012 9:16:11 PM EDT
[#41]
Quoted:
What hand guard system is on Blackwind's AMD ? Sent you a URL in an Private Message. MI Universal AK Quad Rail. Looks/Fits great. ETA: Woops, didnt realise you were asking about a different poster. 
|
|
|
|
Posted: 3/12/2012 2:11:35 AM EDT
[#42]
Quoted:
What hand guard system is on Blackwind's AMD ? US Palm AK-47 Cowitness Rail/Handguard product of a Midwest Industries and US PALM collaboration. I originally ran the T1 on it. Moved to the back and left the US Palm on for weight up front. |
|
|
|
Posted: 4/15/2012 6:42:11 PM EDT
[#43]
rifle pics is crappy cell phone pics that i tried to doll up without much luck
 but you get the idea
|
|
|
|
Posted: 4/16/2012 4:54:15 PM EDT
[#44]
just received mine yesterday, ordered from jgsales. very happy with the rifle, very well built/clean/matching numbers/chrome lined barrel, and surprisingly light
|
|
|
|
Posted: 4/16/2012 5:33:34 PM EDT
[#45]
Quoted:
just received mine yesterday, ordered from jgsales. very happy with the rifle, very well built/clean/matching numbers/chrome lined barrel, and surprisingly light http://i6.photobucket.com/albums/y211/kadiindo/059-1.jpg http://i6.photobucket.com/albums/y211/kadiindo/058-2.jpg http://i6.photobucket.com/albums/y211/kadiindo/016-8.jpg http://i6.photobucket.com/albums/y211/kadiindo/027-5.jpg Nice! I want me a amd65 so very bad |
|
|
|
Posted: 4/24/2012 12:20:23 AM EDT
[#46]
Who makes the side folder used to replace the factory wire folder in the second photo?
|
|
|
|
Posted: 4/24/2012 5:34:44 AM EDT
[#47]
recently added a riser for my sidefolder, from amd65 tech.com.
|
|
|
|
Posted: 4/25/2012 4:01:57 PM EDT
[#48]
Here is mine. It is a TGI AMD65 on a Nodak Spud SA2000M receiver. All matchng parts. I've since aquired several AMD "Tanker" 20 round mags and am cooking with gas...
Earl 
|
|
|
|
Posted: 5/21/2012 12:47:13 PM EDT
[#49]
http://i1054.photobucket.com/albums/s498/stereoguy247/ARARAK.jpg
My Hungarian Feg SA-85m on the right |
|
|
|
Posted: 5/21/2012 6:53:21 PM EDT
[#50]
Not as nice as some of the AMD's on here, but here's my budget build.
http://i1105.photobucket.com/albums/h354/mindbeyondaverage/ak.jpg Constructive criticism welcome. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
