User Panel
User Panel
User Panel
|
Posted: 8/29/2014 9:20:22 PM EDT
[#1]
With stock fully extended to the tip of the muzzle device is 26" exactly and around 23" fully extend to the tip of the barrel sans brake....I may also have an earlier version of the stock. I didn't pay anywhere near as much as they are going for these days guess i got lucky! thanks, just submitted my form 1, the waiting begins :S |
|
|
|
Posted: 8/29/2014 9:41:05 PM EDT
[#2]
Quote HistoryQuoted:
thanks, just submitted my form 1, the waiting begins :S Quote HistoryQuoted:
With stock fully extended to the tip of the muzzle device is 26" exactly and around 23" fully extend to the tip of the barrel sans brake....I may also have an earlier version of the stock. I didn't pay anywhere near as much as they are going for these days guess i got lucky! thanks, just submitted my form 1, the waiting begins :S Waiting? Tell me you E-filed, they're running like 20 days right now. |
|
|
|
Posted: 8/30/2014 11:26:31 AM EDT
[#3]
Waiting? Tell me you E-filed, they're running like 20 days right now. yeah i did, this is my first form 1 too, after this im getting the 762sdn6 suppressor to finish this build 
|
|
|
|
Posted: 8/30/2014 11:28:49 AM EDT
[#4]
Quote HistoryQuoted:
yeah i did, this is my first form 1 too, after this im getting the 762sdn6 suppressor to finish this build Quote HistoryQuoted:
Waiting? Tell me you E-filed, they're running like 20 days right now. yeah i did, this is my first form 1 too, after this im getting the 762sdn6 suppressor to finish this build My 8/18 F1 just came back today. 12 days. 
|
|
|
|
Posted: 8/31/2014 5:05:01 AM EDT
[#5]
Quote HistoryQuoted:
What upper receiver is that? Those slant cuts at the rear look pretty cool. Quote HistoryQuoted:
Quoted:
Progress is slow, but there is progress. Honey Badger in the making. HERA Lower (Made in Germany) What upper receiver is that? Those slant cuts at the rear look pretty cool. JP Rifles CTR-02. |
|
|
|
Posted: 9/30/2014 3:44:42 PM EDT
[#6]
Progression!
Obviously a lot of things missing, but will take her to the range tomorrow with another lower. This is a JP Rifles CTR-02 upper with a MEGA Arms lower. NEA stock. Supressor from B&T in my home country Switzerland! 
|
|
|
|
Posted: 10/7/2014 8:16:00 PM EDT
[#7]
Quote HistoryQuoted:
Progression! Obviously a lot of things missing, but will take her to the range tomorrow with another lower. This is a JP Rifles CTR-02 upper with a MEGA Arms lower. NEA stock. Supressor from B&T in my home country Switzerland! http://oi61.tinypic.com/907zux.jpg http://oi60.tinypic.com/25r2gxt.jpg can you post a pic of the mag bottom plate? it looks like the end of the buttstock for the nea |
|
|
|
Posted: 10/14/2014 2:31:01 AM EDT
[#8]
Quote HistoryQuoted:
can you post a pic of the mag bottom plate? it looks like the end of the buttstock for the nea It's a Taran Tactical, I think the reflection from the lightning makes it look a bit different. Taran Tactical |
|
|
|
Posted: 10/14/2014 2:31:35 AM EDT
[#9]
Yes, I know, some things are still missing. |
|
|
|
Posted: 11/17/2014 11:45:36 AM EDT
[#10]
|
|
|
|
Posted: 11/25/2014 4:07:59 AM EDT
[#11]
I have a problem. The NEA stock buffer tube is too short to close over the buffer spring retainer.
Have tried several (CNC machined) lowers, all the same. Did I get a NEA stock with too short of a buffer tube? 
Any solutions? 
|
|
|
|
Posted: 11/25/2014 8:49:12 AM EDT
[#12]
Do you have a lathe?
Could the towers be too thick on the billet lowers? The top of the tower should be 0.503" thick. Or you could use a press-in captive detent, something like this, but shorten the nose. http://www.mcmaster.com/#=uqx295 |
|
|
|
Posted: 11/25/2014 10:03:35 AM EDT
[#13]
Quote HistoryQuoted:
Do you have a lathe? Could the towers be too thick on the billet lowers? The top of the tower should be 0.503" thick. Or you could use a press-in captive detent, something like this, but shorten the nose. http://www.mcmaster.com/#=uqx295 link goes to their main page. what part number are you trying to show? |
|
|
|
Posted: 11/25/2014 10:16:15 AM EDT
[#14]
Quote HistoryQuoted:
link goes to their main page. what part number are you trying to show? Quote HistoryQuoted:
Quoted:
Do you have a lathe? Could the towers be too thick on the billet lowers? The top of the tower should be 0.503" thick. Or you could use a press-in captive detent, something like this, but shorten the nose. http://www.mcmaster.com/#=uqx295 link goes to their main page. what part number are you trying to show? Oops: PN 6423A12 
|
|
|
|
Posted: 11/25/2014 2:14:23 PM EDT
[#15]
Quote HistoryQuoted:
Do you have a lathe? Could the towers be too thick on the billet lowers? The top of the tower should be 0.503" thick. Or you could use a press-in captive detent, something like this, but shorten the nose. http://www.mcmaster.com/#=uqx295 Thank you! I do not have a lathe. I measure about 0,514" on both. |
|
|
|
Posted: 11/25/2014 8:56:01 PM EDT
[#16]
Use a JP silent captured spring, you don't need a buffer retainer/spring and it will reduce the "springy" noise when shooting suppressed.
Edit: never mind, forgot you were using the NEA kit. |
|
|
|
Posted: 11/26/2014 1:59:34 AM EDT
[#17]
Wait. Brain fart.
Why do you need a retainer for the NEA kit? There's a reason the tube is shorter, the retainer would get in the way of the spring, which comes up around the tail of the carrier, and there's no separate buffer to retain. Every time you pull the upper, the buffer spring comes with it, as it is no longer captive in the tube by design. So forget everything we've been talking about. |
|
|
|
Posted: 11/26/2014 7:46:57 AM EDT
[#18]
Quote HistoryQuoted:
Wait. Brain fart.
Why do you need a retainer for the NEA kit? There's a reason the tube is shorter, the retainer would get in the way of the spring, which comes up around the tail of the carrier, and there's no separate buffer to retain. Every time you pull the upper, the buffer spring comes with it, as it is no longer captive in the tube by design. So forget everything we've been talking about. CORRECT! "Our stock does not require the use of the buffer retainer. The buffer tube is in as far as it needs to go. Thanks Support Team North Eastern Arms Group Inc. www.NEAGinc.com" |
|
|
|
Posted: 11/26/2014 8:48:01 AM EDT
[#19]
Quote HistoryQuoted: Wait. Brain fart. Why do you need a retainer for the NEA kit? There's a reason the tube is shorter, the retainer would get in the way of the spring, which comes up around the tail of the carrier, and there's no separate buffer to retain. Every time you pull the upper, the buffer spring comes with it, as it is no longer captive in the tube by design. So forget everything we've been talking about. |
|
|
|
Posted: 11/26/2014 12:06:35 PM EDT
[#20]
Quote HistoryQuoted:
...but then thought maybe I was stupid and kept my mouth shut. We could use more people like you around here.
|
|
|
|
Posted: 12/7/2014 6:48:51 AM EDT
[#21]
For the record.
That stock is sweet http://gearscout.militarytimes.com/2014/12/06/aacs-honey-badger-is-coming-to-market/ |
|
|
|
Posted: 12/7/2014 11:53:46 PM EDT
[#22]
Quote HistoryQuoted:
For the record. That stock is sweet http://gearscout.militarytimes.com/2014/12/06/aacs-honey-badger-is-coming-to-market/ Came here to post this. |
|
|
|
Posted: 12/8/2014 3:52:52 AM EDT
[#23]
Quote HistoryQuoted:
It will much easier to get a 7-8" barrel as I do not think I've seen a 300BLK barrel shorter than that commercially available. What suppressor are you going to use on this in SWE? ICE arms sells a 6.75" the shortest one I know of commercially. probably don't shop to sweeden though. |
|
|
|
Posted: 12/8/2014 6:44:16 AM EDT
[#24]
Quote HistoryQuoted:
ICE arms sells a 6.75" the shortest one I know of commercially. probably don't shop to sweeden though. Quote HistoryQuoted:
Quoted:
It will much easier to get a 7-8" barrel as I do not think I've seen a 300BLK barrel shorter than that commercially available. What suppressor are you going to use on this in SWE? ICE arms sells a 6.75" the shortest one I know of commercially. probably don't shop to sweeden though. ICE Arms... 
|
|
|
|
Posted: 12/8/2014 10:13:17 AM EDT
[#25]
Quote HistoryQuoted:
ICE arms sells a 6.75" the shortest one I know of commercially. probably don't shop to sweeden though. Quote HistoryQuoted:
Quoted:
It will much easier to get a 7-8" barrel as I do not think I've seen a 300BLK barrel shorter than that commercially available. What suppressor are you going to use on this in SWE? ICE arms sells a 6.75" the shortest one I know of commercially. probably don't shop to sweeden though. I would stay away from them. You'd likely end up with, at best, a well-marketed, barely-functional aesthetic muzzle weight. |
|
|
|
Posted: 12/18/2014 11:20:00 AM EDT
[#26]
Ok, I am officially wanting to do a HoneyBadger clone. Have we figured out what components went into the original AAC model?
|
|
|
|
Posted: 12/18/2014 11:50:57 AM EDT
[#27]
Quote HistoryQuoted:
Ok, I am officially wanting to do a HoneyBadger clone. Have we figured out what components went into the original AAC model? A lot of one-off stuff |
|
|
|
Posted: 12/19/2014 1:04:36 PM EDT
[#28]
http://www.thefirearmblog.com/blog/2014/12/18/aac-honey-badger-review/
"The AAC Honey Badger PDW can be easily summed up: it’s an awesome rifle, and it’s immediately soared to the top of my personal wish list" 
|
|
|
|
Posted: 12/19/2014 1:08:02 PM EDT
[#29]
I took my Honey Badger to the range today.
I've shot it several times but NEVER with the NEA bolt carrier. This was the first time EVER with the NEA stock and the NEA bolt carrier - no mods. Gun cycled perfectly, threw out the empties in a very nice fashion. Couldn't be happier. BUT I feel emptines, the build took ages to complete and now I feel incomplete having finished the build. Luckily I have a few mods in mind SLR handguard, perhaps change the G3G trigger etc.
|
|
|
|
Posted: 12/28/2014 4:25:17 AM EDT
[#30]
Mine will have the new 3rd position Geissele trigger (if it happens)
|
|
|
|
Posted: 12/28/2014 11:18:52 AM EDT
[#31]
Mine was ordered from the ammo source.
|
|
|
|
Posted: 12/29/2014 9:03:54 AM EDT
[#32]
Quote HistoryQuoted:
ICE arms sells a 6.75" the shortest one I know of commercially. probably don't shop to sweeden though. Quote HistoryQuoted:
Quoted:
It will much easier to get a 7-8" barrel as I do not think I've seen a 300BLK barrel shorter than that commercially available. What suppressor are you going to use on this in SWE? ICE arms sells a 6.75" the shortest one I know of commercially. probably don't shop to sweeden though. Hell, they don't even ship to America......
|
|
|
|
Posted: 12/29/2014 11:54:59 AM EDT
[#33]
If only that goddamit lower could show up.
|
|
|
|
Posted: 12/29/2014 12:05:46 PM EDT
[#34]
Quote HistoryQuoted:
Hell, they don't even ship to America...... Quote HistoryQuoted:
Quoted:
Quoted:
It will much easier to get a 7-8" barrel as I do not think I've seen a 300BLK barrel shorter than that commercially available. What suppressor are you going to use on this in SWE? ICE arms sells a 6.75" the shortest one I know of commercially. probably don't shop to sweeden though. Hell, they don't even ship to America...... Be glad. |
|
|
|
Posted: 12/29/2014 3:48:44 PM EDT
[#35]
|
|
|
|
Posted: 1/10/2015 12:23:52 PM EDT
[#36]
Quote HistoryThat is straight up sexy! Anybody have any more info on it than what was mentioned in the article above? |
|
|
|
Posted: 1/19/2015 6:54:45 AM EDT
[#37]
Brought the Badger to the shooting range, snow and ice here but Badger doesn't care!
I added some fire  and everyone was happy.
Looking forward to the spring and I'll do some added testing, long range 200-300++ yards specifically. Shoots nice and has very mild recoil. Love it! 
5.11 Tactical Carry bag http://www.511tactical.com/select-carry-sling-pack.html 
|
|
|
|
Posted: 1/22/2015 7:24:43 AM EDT
[#38]
Note the Noveske pin and paint job.
|
|
|
|
Posted: 1/22/2015 11:38:02 AM EDT
[#39]
Quote HistoryQuoted:
If only that goddamit lower could show up. I got mine from JoeBobOutfitters over Xmas |
|
|
|
Posted: 1/23/2015 9:16:56 PM EDT
[#40]
Any word on when the MVB Industries ARC Stock will be available for sale?
|
|
|
|
Posted: 2/27/2015 9:53:38 AM EDT
[#41]
GOT WOOD?
|
|
|
|
Posted: 3/23/2015 12:33:10 AM EDT
[#42]
I wanted to do a honey badger and just couldn't justify paying the prices for the stock. I was still digging my 300BLK SBR so this is what I ended up with. My Honey badger variant
  
|
|
|
|
Posted: 3/23/2015 8:15:36 AM EDT
[#43]
Good to see so many people getting on the 300 blackout bandwagon with me. lol
I just finished up my SBR, and have a suppressor waiting at the shop for my F4 to arrive. I ended up going for a 10in barrel, and Troy PDW stock. 
|
|
|
|
Posted: 4/2/2015 2:18:53 AM EDT
[#44]
Keep the Honey Badgers coming! I love them all!
|
|
|
|
Posted: 4/21/2015 5:23:52 AM EDT
[#46]
Which handguard is that? SLR?
I have the same, thinking about mounting it. Also have these to try 
|
|
|
|
Posted: 4/21/2015 8:30:55 AM EDT
[#47]
Quote HistoryQuoted:
Which handguard is that? SLR? I have the same, thinking about mounting it. Also have these to try http://i.imgur.com/tIjKcwx.jpg Picked up a few boxes the other day, see if it's any better than the crappy newer Rem 220gr... The Gemtech stuff does pretty well for me. |
|
|
|
Posted: 4/24/2015 6:47:50 AM EDT
[#48]
|
|
|
|
Posted: 4/24/2015 10:52:45 PM EDT
[#49]
Quote HistoryQuoted:
Which handguard is that? SLR? I have the same, thinking about mounting it. Also have these to try http://i.imgur.com/tIjKcwx.jpg Yes. SLR. |
|
|
|
Posted: 5/1/2015 11:31:23 PM EDT
[#50]
I'm about to embark on one of these. Stamps filed for can and SBR. Plan on using a milled upper I got from Centerfire, and I'm making my own titanium .30 cal can.
Any advice on nailing the details? |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
.jpg)
