User Panel
User Panel
User Panel
TX, USA
|
Posted: 10/3/2013 11:36:08 AM EDT
[#1]
yeah I just ordered I NEA CCS 2 weeks ago, I hope im able to put a side charging nub on the bCg that comes with the stock
|
|
|
TX, USA
|
Posted: 10/3/2013 9:24:37 PM EDT
[Last Edit: Rock501]
[#2]
Quote HistoryOriginally Posted By the1337aaron:
yeah I just ordered I NEA CCS 2 weeks ago, I hope im able to put a side charging nub on the bCg that comes with the stock The Bolt Carrier seams to be good to go. I say this because I have not actually drilled into it or put a sharp edge to it to test it the metal but it looks like and feels and appears that it is hard as shit! As long as you have a gunsmith like mine  you should be good to go.
haha, no really, as long as its done with a mill and by someone who has "gun modification" experience then it should be as hard as installing a new light switch 
|
|
|
VA, USA
|
Posted: 10/4/2013 8:10:00 AM EDT
[#3]
|
|
|
|
Posted: 10/4/2013 10:23:40 AM EDT
[#4]
Recently finished...
|
|
|
|
|
Posted: 10/5/2013 1:08:27 AM EDT
[#5]
Finally got my 2 stamps in for this build.:
 |
|
|
|
USA
|
Posted: 10/5/2013 4:40:37 AM EDT
[#6]
 
Left to Right: Lehigh 110 gr Controlled Chaos, Barnes 110 gr TAC-TX, Barnes 110 gr TSX FB, Hornady 123 gr V-max (twice sized through .309 die), Hornady 125 gr SST, Nosler 125 Ballistic Tip, Sierra 125 gr Matchking, Sierra 150 gr FMJ, Hornady 150 gr Interlock, Lee 155 gr, Lee 230 gr |
|
|
AZ, USA
|
Posted: 10/6/2013 11:54:24 AM EDT
[#7]
|
|
|
|
Posted: 10/8/2013 12:45:15 AM EDT
[#8]
Quote HistoryOriginally Posted By SWExtreme:
http://i.imgur.com/RKBJf73l.jpghttp://i.imgur.com/to4A1RLl.jpg Left to Right: Lehigh 110 gr Controlled Chaos, Barnes 110 gr TAC-TX, Barnes 110 gr TSX FB, Hornady 123 gr V-max (twice sized through .309 die), Hornady 125 gr SST, Nosler 125 Ballistic Tip, Sierra 125 gr Matchking, Sierra 150 gr FMJ, Hornady 150 gr Interlock, Lee 155 gr, Lee 230 gr you should post some info on that reloading somewhere, which one you like which ones feed good, ect..... im really interested in the Lehigh stuff, want to get my hands on some. to add - you are sittin pretty, i wish i had that much to reload/develope for mine |
|
|
|
|
Posted: 10/14/2013 7:06:25 PM EDT
[Last Edit: kaneroy]
[#9]
Seekins SP223 lower
LaRue mil-spec buffer tube, buffer, and spring. Magpul mil-spec CTR in OD green ERGO grip in OD green Geissele SSA-E trigger springs and pins from a Windham Weaponry LPK Seeking iRMT-R upper Seekins MCSR V2 13 inch rail Rainier Arms Match barrel. 16 inch (300BLK) BCM gas block WMD gas tube with black shit on it(cause that's tacticool) Rainier Arms Raptor charging handle AAC break ICE Arms BCG 
4 shots @100yds. Hornady 110 grain V-Max 
|
|
|
|
TX, USA
|
Posted: 10/14/2013 10:21:59 PM EDT
[#10]
Quote HistoryOriginally Posted By SaturationTech:
Recently finished... http://i170.photobucket.com/albums/u247/SaturationTech/300%20Blackout/300Blackout-2_zpsd22c17b1.jpg What stock is this??? Great looking rifle. |
|
|
|
Posted: 10/14/2013 10:54:03 PM EDT
[#11]
Ergo F93 Pro.
I have one on my SPR-ish build. LOVE IT. |
|
|
|
CHE
|
Posted: 10/15/2013 7:46:11 PM EDT
[#12]
|
|
|
WV, USA
|
Posted: 10/16/2013 10:41:07 PM EDT
[#13]
|
|
|
USA
|
Posted: 10/18/2013 3:15:37 PM EDT
[#14]
My .300blk pistol build until my SBR stamp arrives. Also waiting on my form 4 for an SDN6.
|
|
|
GA, USA
|
Posted: 10/24/2013 10:59:34 AM EDT
[#15]
 " />
Finally after 2 years of gathering parts, she's done. Noveske Lower w/ G&R Tactical LPK, Magpul Grip/Stock/MEtal Trigger Guard Keyhole Forge Upper w/ Noveske 8.2" 300 Blackout 1/7 barrel with AAC Brake, Seekins 7" BAR Rail, Troy Sights, Rainier Nickel Boron BCG and Raptor charging Handle. Thanks to everyone on this sight for their help on this build! |
|
|
SC, USA
|
Posted: 10/24/2013 11:38:02 AM EDT
[Last Edit: uvausmc]
[#16]
Quote HistoryOriginally Posted By zanemasterx:
My .300blk pistol build until my SBR stamp arrives. Also waiting on my form 4 for an SDN6. http://i.imgur.com/DbeRxVPh.jpg http://i.imgur.com/HzMyG0Wh.jpg http://i.imgur.com/SoX0iIh.jpg Unless you're planning on leaving your SDN-6 on permanantly, that handguard isn't going to work well with the SDN-6 latch, if it even fits in the handguard at all. |
|
|
AFG
|
Posted: 10/24/2013 1:12:02 PM EDT
[#17]
|
|
|
OR, USA
|
Posted: 10/24/2013 5:24:42 PM EDT
[#18]
Quote HistoryOriginally Posted By uvausmc:
Unless you're planning on leaving your SDN-6 on permanantly, that handguard isn't going to work well with the SDN-6 latch, if it even fits in the handguard at all. Quote HistoryOriginally Posted By uvausmc:
Originally Posted By zanemasterx:
My .300blk pistol build until my SBR stamp arrives. Also waiting on my form 4 for an SDN6. http://i.imgur.com/DbeRxVPh.jpg http://i.imgur.com/HzMyG0Wh.jpg http://i.imgur.com/SoX0iIh.jpg Unless you're planning on leaving your SDN-6 on permanantly, that handguard isn't going to work well with the SDN-6 latch, if it even fits in the handguard at all. I was wondering about that too. If it does itll look sweet though. |
|
|
TX, USA
|
Posted: 10/24/2013 5:53:24 PM EDT
[#19]
|
|
|
TX, USA
|
Posted: 10/24/2013 8:17:04 PM EDT
[#20]
Quote HistoryOriginally Posted By AZshooter0930:
For an upcoming build :D <a href="http://s44.photobucket.com/user/mattmonte/media/IMG_20131002_164949_zpsdfe35519.jpg.html" target="_blank">http://i44.photobucket.com/albums/f11/mattmonte/IMG_20131002_164949_zpsdfe35519.jpg</a> <a href="http://s44.photobucket.com/user/mattmonte/media/48afa3ba-f801-46d5-b6e4-1efdf3db57bd_zps7b60242d.jpg.html" target="_blank">http://i44.photobucket.com/albums/f11/mattmonte/48afa3ba-f801-46d5-b6e4-1efdf3db57bd_zps7b60242d.jpg</a> I got that same barrel, but I got sketched out by it not being a known brand so I bought a rainier ultra match 10.5 barrel |
|
|
TX, USA
|
Posted: 10/24/2013 8:19:08 PM EDT
[#21]
im also waiting for my NEA CCS too
|
|
|
USA
|
Posted: 10/24/2013 8:22:01 PM EDT
[#22]
Quote HistoryWoah....you win. |
|
|
|
Posted: 10/24/2013 8:35:54 PM EDT
[#23]
Quote HistoryWhat length barrel is that? |
|
|
|
GA, USA
|
Posted: 10/24/2013 8:57:00 PM EDT
[#24]
Waiting on a Battlelink Minimalist stock to come in to finish it off.
|
|
|
|
Posted: 10/24/2013 11:41:00 PM EDT
[#25]
Quote HistoryOriginally Posted By Bartholomew_Roberts:
What length barrel is that? Quote HistoryOriginally Posted By Bartholomew_Roberts:
What length barrel is that? Dude, come on. There is a tape measure above the gun lol. It's most likely around 8.5".
|
|
|
|
VA, USA
|
Posted: 10/25/2013 1:20:16 AM EDT
[#26]
Quote HistoryOriginally Posted By spider:
<a href="http://s26.photobucket.com/user/dwebb11/media/null_zps82cbdca7.jpg.html" target="_blank">http://i26.photobucket.com/albums/c130/dwebb11/null_zps82cbdca7.jpg</a> <a href="http://s26.photobucket.com/user/dwebb11/media/null_zps62255fc0.jpg.html" target="_blank">http://i26.photobucket.com/albums/c130/dwebb11/null_zps62255fc0.jpg</a> nice , do you have a pic with the stock extended ? |
|
|
VA, USA
|
Posted: 10/25/2013 1:21:28 AM EDT
[#27]
Quote Historyfollybeacher --- what did you use to darken the adjustment rods ? |
|
|
|
Posted: 10/25/2013 8:43:40 AM EDT
[#28]
Quote HistoryOriginally Posted By chevcamo:
Dude, come on. There is a tape measure above the gun lol. It's most likely around 8.5".Quote HistoryOriginally Posted By chevcamo:
Originally Posted By Bartholomew_Roberts:
What length barrel is that? Dude, come on. There is a tape measure above the gun lol. It's most likely around 8.5".My guess is 7.5" - shortest AAC will warranty and doesn't include muzzle device; but it is difficult to say which is why I asked. |
|
|
|
|
Posted: 10/25/2013 1:04:42 PM EDT
[#29]
Quote HistoryOriginally Posted By Bartholomew_Roberts:
My guess is 7.5" - shortest AAC will warranty and doesn't include muzzle device; but it is difficult to say which is why I asked. Quote HistoryOriginally Posted By Bartholomew_Roberts:
Originally Posted By chevcamo:
Originally Posted By Bartholomew_Roberts:
What length barrel is that? Dude, come on. There is a tape measure above the gun lol. It's most likely around 8.5".My guess is 7.5" - shortest AAC will warranty and doesn't include muzzle device; but it is difficult to say which is why I asked. Thats my vote, 7.5" |
|
|
|
|
Posted: 10/25/2013 2:00:21 PM EDT
[#30]
Quote HistoryOriginally Posted By Gimpy_AK:
Thats my vote, 7.5" Quote HistoryOriginally Posted By Gimpy_AK:
Originally Posted By Bartholomew_Roberts:
Originally Posted By chevcamo:
Originally Posted By Bartholomew_Roberts:
What length barrel is that? Dude, come on. There is a tape measure above the gun lol. It's most likely around 8.5".My guess is 7.5" - shortest AAC will warranty and doesn't include muzzle device; but it is difficult to say which is why I asked. Thats my vote, 7.5" I was just messing around Bartholomew. It can't be 7.5" though because the threads on the barrel start around the 1.5" mark and the barrel extension starts around the 10" mark, so that's why I said 8.5". Plus I know a company that just had a sale on 8.5" 300 barrels. |
|
|
|
TX, USA
|
Posted: 10/25/2013 4:40:52 PM EDT
[#31]
Or an 8.2" Noveske ;)
|
|
|
TX, USA
|
Posted: 10/28/2013 4:42:47 PM EDT
[Last Edit: follybeacher]
[#32]
Quote HistoryOriginally Posted By argolfer:
Or an 8.2" Noveske ;) Quote HistoryOriginally Posted By argolfer:
Or an 8.2" Noveske ;) exactly. 8.2 noveske 
cycles subs and supers suppressed. not a blackout, but a picture of the same stock on a 10.5 switchblock: 
Originally Posted By 1iviper:
follybeacher --- what did you use to darken the adjustment rods ? came like that |
|
|
VA, USA
|
Posted: 11/1/2013 11:01:35 PM EDT
[#33]
Quote HistoryOriginally Posted By spider:
<a href="http://s26.photobucket.com/user/dwebb11/media/null_zps82cbdca7.jpg.html" target="_blank">http://i26.photobucket.com/albums/c130/dwebb11/null_zps82cbdca7.jpg</a> <a href="http://s26.photobucket.com/user/dwebb11/media/null_zps62255fc0.jpg.html" target="_blank">http://i26.photobucket.com/albums/c130/dwebb11/null_zps62255fc0.jpg</a> Pretty sure this weapon just won the entire thread. |
|
|
VA, USA
|
Posted: 11/1/2013 11:02:43 PM EDT
[Last Edit: stagepaint]
[#34]
Quote HistoryOriginally Posted By spider:
<a href="http://s26.photobucket.com/user/dwebb11/media/null_zps82cbdca7.jpg.html" target="_blank">http://i26.photobucket.com/albums/c130/dwebb11/null_zps82cbdca7.jpg</a> <a href="http://s26.photobucket.com/user/dwebb11/media/null_zps62255fc0.jpg.html" target="_blank">http://i26.photobucket.com/albums/c130/dwebb11/null_zps62255fc0.jpg</a> double tap 
|
|
|
|
Posted: 11/2/2013 10:33:12 PM EDT
[#35]
Lower - Form 1 SBR
Trigger - Wilson TTU MIL Stock - VLTOR IMOD Grip - Tango Down BG16 Charge Handle - Rainier Raptor Extra - MAGPUL B.A.D. Lever Upper - Bravo Company Rail - Noveske Rifleworks Foregrip - Tango Down QD Barrel - Noveske 12.2" 300BLK Sights - MAGPUL MBUS Flash hider - Gem-Tech Vortex Suppressor - Gem-Tech Quicksand Optic - Vortex Viper PST 1-4 ADM Mount QD Mags - Lancer War Fighter 20's LOUD 
QUIET 
|
|
|
|
|
Posted: 11/3/2013 10:49:11 AM EDT
[#36]
YAY, I can finally play in this thread!
I was at the LGS yesterday after hours drinking a couple beers and BSing with some friends and i see this this 8.5" 300blkout upper sitting in the case. well im building a 11.5" SBR at the moment and at some point want a 300 upper for it as well so i was tempted. Another beer later and i found myself putting some money down on it 
I went to the shop to buy a 11.5" 556 barrel and ended up with that and a 11" NSR rail for the other build
|
|
|
|
|
Posted: 11/3/2013 12:28:36 PM EDT
[#37]
Quote HistoryOriginally Posted By FrozenWinter:
YAY, I can finally play in this thread! I was at the LGS yesterday after hours drinking a couple beers and BSing with some friends and i see this this 8.5" 300blkout upper sitting in the case. well im building a 11.5" SBR at the moment and at some point want a 300 upper for it as well so i was tempted. Another beer later and i found myself putting some money down on it http://i1228.photobucket.com/albums/ee457/winjefj/Guns/IMAG0583_zps67cafc37.jpg I went to the shop to buy a 11.5" 556 barrel and ended up with that and a 11" NSR rail for the other build Man from the look of what is in the display counter, the LGS you visit must be awesome. Wish I has some place to visit like that around here. |
|
|
|
|
Posted: 11/3/2013 1:10:48 PM EDT
[#38]
Quote HistoryOriginally Posted By chevcamo:
Man from the look of what is in the display counter, the LGS you visit must be awesome. Wish I has some place to visit like that around here. Quote HistoryOriginally Posted By chevcamo:
Originally Posted By FrozenWinter:
YAY, I can finally play in this thread! I was at the LGS yesterday after hours drinking a couple beers and BSing with some friends and i see this this 8.5" 300blkout upper sitting in the case. well im building a 11.5" SBR at the moment and at some point want a 300 upper for it as well so i was tempted. Another beer later and i found myself putting some money down on it http://i1228.photobucket.com/albums/ee457/winjefj/Guns/IMAG0583_zps67cafc37.jpg I went to the shop to buy a 11.5" 556 barrel and ended up with that and a 11" NSR rail for the other build Man from the look of what is in the display counter, the LGS you visit must be awesome. Wish I has some place to visit like that around here. Its pretty much an all AR gunshop. Couple of ak's and other things but mainly ARs. Its fun to even just go there and hang out |
|
|
|
|
Posted: 11/3/2013 7:33:41 PM EDT
[#39]
Quote HistoryOriginally Posted By FrozenWinter:
YAY, I can finally play in this thread! I was at the LGS yesterday after hours drinking a couple beers and BSing with some friends and i see this this 8.5" 300blkout upper sitting in the case. well im building a 11.5" SBR at the moment and at some point want a 300 upper for it as well so i was tempted. Another beer later and i found myself putting some money down on it http://i1228.photobucket.com/albums/ee457/winjefj/Guns/IMAG0583_zps67cafc37.jpg I went to the shop to buy a 11.5" 556 barrel and ended up with that and a 11" NSR rail for the other build Is that the new CMMG handgaurd? |
|
|
|
MO, USA
|
Posted: 11/3/2013 8:17:32 PM EDT
[#40]
Quote HistoryThat's cool!!! 
Who makes that stock? |
|
|
|
Posted: 11/3/2013 8:22:36 PM EDT
[#41]
Quote HistoryOriginally Posted By NCUrk:
Is that the new CMMG handgaurd? Quote HistoryOriginally Posted By NCUrk:
Originally Posted By FrozenWinter:
YAY, I can finally play in this thread! I was at the LGS yesterday after hours drinking a couple beers and BSing with some friends and i see this this 8.5" 300blkout upper sitting in the case. well im building a 11.5" SBR at the moment and at some point want a 300 upper for it as well so i was tempted. Another beer later and i found myself putting some money down on it http://i1228.photobucket.com/albums/ee457/winjefj/Guns/IMAG0583_zps67cafc37.jpg I went to the shop to buy a 11.5" 556 barrel and ended up with that and a 11" NSR rail for the other build Is that the new CMMG handgaurd? Noveski NSR on the 300 pictured above |
|
|
|
USA
|
Posted: 11/4/2013 7:45:52 AM EDT
[#42]
LMT MRP in 300BO
|
|
|
AR, USA
|
Posted: 11/4/2013 3:07:17 PM EDT
[#43]
|
|
|
|
Posted: 11/4/2013 7:07:40 PM EDT
[#44]
Quote HistoryOriginally Posted By spider:
<a href="http://s26.photobucket.com/user/dwebb11/media/null_zps82cbdca7.jpg.html" target="_blank">http://i26.photobucket.com/albums/c130/dwebb11/null_zps82cbdca7.jpg</a> <a href="http://s26.photobucket.com/user/dwebb11/media/null_zps62255fc0.jpg.html" target="_blank">http://i26.photobucket.com/albums/c130/dwebb11/null_zps62255fc0.jpg</a> Who knows what kind of muzzle device is used on this weapon? |
|
|
|
NY, USA
|
Posted: 11/4/2013 7:46:19 PM EDT
[Last Edit: talonxracer]
[#45]
Quote HistoryOriginally Posted By dmtsc:
Who knows what kind of muzzle device is used on this weapon? Quote HistoryOriginally Posted By dmtsc:
Originally Posted By spider:
<a href="http://s26.photobucket.com/user/dwebb11/media/null_zps82cbdca7.jpg.html" target="_blank">http://i26.photobucket.com/albums/c130/dwebb11/null_zps82cbdca7.jpg</a> <a href="http://s26.photobucket.com/user/dwebb11/media/null_zps62255fc0.jpg.html" target="_blank">http://i26.photobucket.com/albums/c130/dwebb11/null_zps62255fc0.jpg</a> Who knows what kind of muzzle device is used on this weapon? here ya go, http://www.weaponoutfitters.com/qd-brake-shield-for-aac.html |
|
|
|
Posted: 11/4/2013 8:02:58 PM EDT
[#46]
Quote HistoryOriginally Posted By jtdam24:
LMT MRP in 300BO http://i.imgur.com/TbzH7Nw.jpg http://i.imgur.com/iL2cw4B.jpg http://i.imgur.com/Ba4GHzw.jpg http://i.imgur.com/HjPczDM.jpg http://i.imgur.com/4Te352l.jpg Wow, now that's one expensive upper set up. Looks nice. What other barrels you have for the upper? |
|
|
|
USA
|
Posted: 11/5/2013 2:24:14 AM EDT
[Last Edit: jtdam24]
[#47]
Quote HistoryOriginally Posted By chevcamo:
Wow, now that's one expensive upper set up. Looks nice. What other barrels you have for the upper? Quote HistoryOriginally Posted By chevcamo:
Originally Posted By jtdam24:
LMT MRP in 300BO http://i.imgur.com/TbzH7Nw.jpg http://i.imgur.com/iL2cw4B.jpg http://i.imgur.com/Ba4GHzw.jpg http://i.imgur.com/HjPczDM.jpg http://i.imgur.com/4Te352l.jpg Wow, now that's one expensive upper set up. Looks nice. What other barrels you have for the upper? Lol thanks. I have 3 other MRP chassis, 2 rifle lengths (14.5 chrome lined and 16" SS) and another CQB chassis (10.5" chrome lined). |
|
|
TX, USA
|
Posted: 11/5/2013 10:36:54 AM EDT
[#48]
Quote HistoryOriginally Posted By kissmy300blkbrass:
http://i1146.photobucket.com/albums/o531/kissmy300blkbrass/IMG_20131103_125436405_HDR_zpsea20bd91.jpg Very nice I like the MCSR V2. as you can see 
Built this over the weekend, waiting on my stamp to complete this baby. |
|
|
|
Posted: 11/5/2013 11:49:55 PM EDT
[#49]
I just got my new toy
|
|
|
|
|
Posted: 11/6/2013 12:55:17 PM EDT
[#50]
loaded with 30 rds of hate and discontent
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
