User Panel
User Panel
User Panel
|
Posted: 3/12/2014 12:49:27 PM EDT
[#1]
Any way to tell how much weight any of these quads can carry?
I'd like to get one to mount my GoPro under, so would be looking for the cheapest way of doing that to see if it is something I then want to get into and spend a ton of cash on. |
|
|
|
Posted: 3/12/2014 1:43:39 PM EDT
[#2]
Quote HistoryQuoted:
Wonder if there have been any experiments scaling these up and having actual human pilots in them, 
|
|
|
|
Posted: 3/12/2014 2:28:59 PM EDT
[#3]
Damn..................
I kind of wished I had never clicked on this thread. I already have too many expensive hobbies but this intrigues me enough that I may have to start a new hobby.I had been thinking about hooking my go pro to a kite but this is a better idea. |
|
|
|
Posted: 3/12/2014 2:47:53 PM EDT
[#4]
Quote HistoryQuoted:
Damn.................. I kind of wished I had never clicked on this thread. I already have too many expensive hobbies but this intrigues me enough that I may have to start a new hobby.I had been thinking about hooking my go pro to a kite but this is a better idea. Do yourself and your wallet a huge favor and just move along. Nothing to see or have fun with here. 
|
|
|
|
Posted: 3/12/2014 5:44:17 PM EDT
[#5]
My cheap PFV trainer I decided to put together today using my V262. Really not wanting to crash and tear up another 350QX trying this again for a while
|
|
|
|
Posted: 3/12/2014 9:44:25 PM EDT
[#6]
Quote HistoryQuoted:
I bought the $99 Heli-Max 1SQ this week and I'm so glad that I didn't start with a $500-$600 Blade 350/Phantom. There's a wee bit of a learning curve and gravity being what it is the copter can take a beating. I treed my quadcopter about 30 feet up in one of my trees, I've also put it on the roof (and flew it off!) and bounced it off lots of stuff. After about 60 minutes of flying I'm getting good enough that I can hover and make the thing dance around a bit. I'm not yet to the point where I can race it round. Once I'm there I figure I can drop the bucks on a better platform. Quote HistoryQuoted:
Quoted:
Just got done reading all 10 pages...damn...now I want one of these. What is a good starter quad? Is it like many of my other hobbies where it makes more sense to skip the "beginner" quality gear and move straight to something better? I was looking at the Blade Nano. Are these things worth a damn or will they just frustrate me? I bought the $99 Heli-Max 1SQ this week and I'm so glad that I didn't start with a $500-$600 Blade 350/Phantom. There's a wee bit of a learning curve and gravity being what it is the copter can take a beating. I treed my quadcopter about 30 feet up in one of my trees, I've also put it on the roof (and flew it off!) and bounced it off lots of stuff. After about 60 minutes of flying I'm getting good enough that I can hover and make the thing dance around a bit. I'm not yet to the point where I can race it round. Once I'm there I figure I can drop the bucks on a better platform. I believe I did the exact same thing as you Paul. I purchased the 1SQ(I think I posted about it in this thread) and it was a steep learning curve. I loved flying it though so I purchased the Phantom. Anything that uses a GPS function is so much easier to fly on that I was still crashing the 1SQ very often and picked up the Phantom and did not have any crashes for a bit. The cheap ones pretty much just get you hooked like an addict.
I got my FPV gear installed this last weekend but could not fly it due to weather. Looking forward to this weekend. The video through the Fat Shark goggles is a lot clearer then I expected. I hovered it in the house to function check everything.
|
|
|
|
Posted: 3/12/2014 10:31:57 PM EDT
[#7]
I'm thinking of building a TBS Discovery quad next.
Can anyone tell me why I should upgrade to the Naza V2 over the DJI NAZA Lite + GPS. It seems that the Lite with GPS does what I want it to do. It has stabilization, RTH, and different operations modes(IOC, etc.). Am I missing anything I might regret later on? |
|
|
|
Posted: 3/12/2014 11:30:35 PM EDT
[#8]
Quote HistoryQuoted:
What kind of flight times are you getting with the TBS? Looks interesting and what gimbal is that on the front? I am getting about 10 minutes with the 4000mAh battery. Gimbal is a Beholder 2 axis that is "modded" to fit on the front. Since it is hard mounted to the frame I am getting some jello. Working on a solution to isolate it so the video is as good as what I get from my Hex. |
|
|
|
Posted: 3/12/2014 11:34:41 PM EDT
[#9]
Quote HistoryQuoted:
I'm thinking of building a TBS Discovery quad next. Can anyone tell me why I should upgrade to the Naza V2 over the DJI NAZA Lite + GPS. It seems that the Lite with GPS does what I want it to do. It has stabilization, RTH, and different operations modes(IOC, etc.). Am I missing anything I might regret later on? The Lite can not use the DJI IOsd and you can not do the gimbal control with it so no Zenmuse. That said there are aftermarket gimbals and OSD. I recently switched from the Lite to V2 since I do photography and needed the extra stability (V2 is a bit more stable in the air and easier take offs) The other thing is the Lite does not have firmware that you can update. The Lite is still a great flight controller |
|
|
|
Posted: 3/13/2014 12:16:34 AM EDT
[#10]
Quote HistoryQuoted:
The Lite can not use the DJI IOsd and you can not do the gimbal control with it so no Zenmuse. That said there are aftermarket gimbals and OSD. I recently switched from the Lite to V2 since I do photography and needed the extra stability (V2 is a bit more stable in the air and easier take offs) The other thing is the Lite does not have firmware that you can update. The Lite is still a great flight controller Quote HistoryQuoted:
Quoted:
I'm thinking of building a TBS Discovery quad next. Can anyone tell me why I should upgrade to the Naza V2 over the DJI NAZA Lite + GPS. It seems that the Lite with GPS does what I want it to do. It has stabilization, RTH, and different operations modes(IOC, etc.). Am I missing anything I might regret later on? The Lite can not use the DJI IOsd and you can not do the gimbal control with it so no Zenmuse. That said there are aftermarket gimbals and OSD. I recently switched from the Lite to V2 since I do photography and needed the extra stability (V2 is a bit more stable in the air and easier take offs) The other thing is the Lite does not have firmware that you can update. The Lite is still a great flight controller I am keeping my fingers crossed the Lite will do the job. I purchased 2 with GPS for about what one V2 would cost to use in my Aquacopter and my LiftoffUAV waterproof quads. Again if or when these quad frames ever arrive. |
|
|
|
Posted: 3/13/2014 1:50:58 AM EDT
[#11]
Just FYI, Trappy from TBS "won" his appeal and commercial use is a go for a lot of people.
|
|
|
|
Posted: 3/13/2014 4:30:39 AM EDT
[#12]
Quote HistoryQuoted: I also have found a thermal camera that I am going to play with. I suspect it's going to suck based upon the model and vibrations from craft I have, but we will see. It seems light enough to lift and has a video out port I've hacked into. http://i1114.photobucket.com/albums/k537/JohnSmith6073/x200xp_zps6c6889e8.jpg Dude buy a Tau, they are itty bitty and don't weigh much. Edit: Also, its 3:30 AM and I should be finishing up my stupid airplane but instead I'm trolling ARFCOM :( back to gluing my fingers together... |
|
|
|
Posted: 3/13/2014 5:02:17 AM EDT
[#13]
Quote HistoryQuoted:
Just FYI, Trappy from TBS "won" his appeal and commercial use is a go for a lot of people. I'm pretty sure the FAA is in a panic right now 
Commercial use will probably be locked down in a hurry though 
|
|
|
|
Posted: 3/13/2014 10:14:20 AM EDT
[#14]
Quote HistoryQuoted:
I'm pretty sure the FAA is in a panic right now
Commercial use will probably be locked down in a hurry though Quote HistoryQuoted:
Quoted:
Just FYI, Trappy from TBS "won" his appeal and commercial use is a go for a lot of people. I'm pretty sure the FAA is in a panic right now
Commercial use will probably be locked down in a hurry though I think the horse is already out of the barn so to speak. |
|
|
|
Posted: 3/13/2014 11:21:21 AM EDT
[#15]
I ordered a DJI Phantom 2 w/ GoPro
Should be here today!!!!! |
|
|
|
Posted: 3/13/2014 11:35:13 AM EDT
[#16]
Quote HistoryQuoted:
I ordered a DJI Phantom 2 w/ GoPro Should be here today!!!!! Phantom is a gatway drug. 
|
|
|
|
Posted: 3/13/2014 3:53:17 PM EDT
[#17]
Quote HistoryQuoted:
Dude buy a Tau, they are itty bitty and don't weigh much. Edit: Also, its 3:30 AM and I should be finishing up my stupid airplane but instead I'm trolling ARFCOM :( back to gluing my fingers together... Quote HistoryQuoted:
Quoted:
I also have found a thermal camera that I am going to play with. I suspect it's going to suck based upon the model and vibrations from craft I have, but we will see. It seems light enough to lift and has a video out port I've hacked into. http://i1114.photobucket.com/albums/k537/JohnSmith6073/x200xp_zps6c6889e8.jpg Dude buy a Tau, they are itty bitty and don't weigh much. Edit: Also, its 3:30 AM and I should be finishing up my stupid airplane but instead I'm trolling ARFCOM :( back to gluing my fingers together... I'm not going with thermal anymore, lost my gubmt backing and access to the closet of toys there.
|
|
|
|
Posted: 3/13/2014 10:04:48 PM EDT
[#18]
Quote HistoryQuoted:
Phantom is a gatway drug. https://lh5.googleusercontent.com/-TwQTlMRCE7w/Usxw3xPVFsI/AAAAAAAAKdI/ialQf59n_-I/s1024/t2.jpg Quote HistoryQuoted:
Quoted:
I ordered a DJI Phantom 2 w/ GoPro Should be here today!!!!! Phantom is a gatway drug. https://lh5.googleusercontent.com/-TwQTlMRCE7w/Usxw3xPVFsI/AAAAAAAAKdI/ialQf59n_-I/s1024/t2.jpg That is an awesome build. |
|
|
|
Posted: 3/13/2014 10:15:26 PM EDT
[#19]
|
|
|
|
Posted: 3/15/2014 7:26:51 AM EDT
[#20]
I'm grabbing a UDI U818A 2.4GHz 4 CH 6 Axis Gyro RC Quadcopter with Camera RTF Mode 2 from Amazon to try it out. Good price and has a camera - good enough for me to see if I have any interest in the hobby. YouTube videos look good.
|
|
|
|
Posted: 3/16/2014 6:23:09 PM EDT
[#21]
Here's my trainer until the motors and ESCs for my tricopter show up.
http://cdn9.modelairplanenews.com/wp-content/uploads/2013/11/ProtoX.jpg |
|
|
|
Posted: 3/17/2014 9:56:43 AM EDT
[#22]
Just finished building my DJI F330. Time to get it programmed and try flying it, :)
Here it is next to the Proto to show size diff. 
Onyx |
|
|
|
Posted: 3/17/2014 6:16:13 PM EDT
[#23]
Quote HistoryQuoted:
I got the SYMA quadcopter. There are more than a few decent or maybe better similar setups, but the SYMA came with a controller and flew out of the box. Great indoor beater, parts are available for when you break stuff. Quote HistoryQuoted:
Quoted:
Can you share the name of the Amazon product, so others can lose some money as well? 
I got the SYMA quadcopter. There are more than a few decent or maybe better similar setups, but the SYMA came with a controller and flew out of the box. Great indoor beater, parts are available for when you break stuff. I stayed away from this for nearly a year. Then you have to mention SYMA while I have Amazon up in another tab. $16 for a remote control helicopter!? Something tells me this will be the most expensive $16 I've ever spent. I'm already off looking at flight control suites, and thinking about the Raspberry Pi I have in the box next to the couch, and how Adafruit takes Bitcoin now. |
|
|
|
Posted: 3/17/2014 7:32:08 PM EDT
[#24]
Got my FPV set up on my phantom last week and finally got to fly it today. Had a lot of wind but everything went well. Really opens up a new world with flying these things.
For those who want to see the range of the stock phantom this will give you a decent idea. I was flying in GPS mode since it was my first time flying FPV so the video sucks but you get an idea. I set it down really hard at the end. besides getting soaking wet everything was fine.
|
|
|
|
Posted: 3/18/2014 10:30:42 AM EDT
[#25]
Quote HistoryQuoted:
Got my FPV set up on my phantom last week and finally got to fly it today. Had a lot of wind but everything went well. Really opens up a new world with flying these things. For those who want to see the range of the stock phantom this will give you a decent idea. I was flying in GPS mode since it was my first time flying FPV so the video sucks but you get an idea. I set it down really hard at the end. besides getting soaking wet everything was fine.  http://youtu.be/ZG-uhDEpcM4Getting that birds eye view the first time you FPV is pretty thrilling isn't it! I've found it makes adults giggle about as much as their first time shooting full auto. |
|
|
|
Posted: 3/18/2014 10:35:40 AM EDT
[#26]
Patiently awaiting the Fedex trucks arrival with my FC40 today. Not working today so I get to play if it arrives early enough
|
|
|
|
Posted: 3/18/2014 6:21:28 PM EDT
[#27]
Got my V262 put together and flying again one more time, less one L.E.D. and have flown the new Phantom FC40 several times without one single hiccup of any kind in fairly High winds. I really like this quad
FC40 using FC40 camera. No sound
|
|
|
|
Posted: 3/19/2014 6:44:14 PM EDT
[#28]
Quote HistoryQuoted:
I stayed away from this for nearly a year. Then you have to mention SYMA while I have Amazon up in another tab. $16 for a remote control helicopter!? Something tells me this will be the most expensive $16 I've ever spent. I'm already off looking at flight control suites, and thinking about the Raspberry Pi I have in the box next to the couch, and how Adafruit takes Bitcoin now. Quote HistoryQuoted:
Quoted:
Quoted:
Can you share the name of the Amazon product, so others can lose some money as well?
I got the SYMA quadcopter. There are more than a few decent or maybe better similar setups, but the SYMA came with a controller and flew out of the box. Great indoor beater, parts are available for when you break stuff. I stayed away from this for nearly a year. Then you have to mention SYMA while I have Amazon up in another tab. $16 for a remote control helicopter!? Something tells me this will be the most expensive $16 I've ever spent. I'm already off looking at flight control suites, and thinking about the Raspberry Pi I have in the box next to the couch, and how Adafruit takes Bitcoin now. Holy shit. I need more flight time. |
|
|
|
Posted: 3/19/2014 7:23:57 PM EDT
[#29]
New project. Rebuilding crashed homemade plane and installing FPV gear and LR control. Gifted a Zephyr (upper grey one).
|
|
|
|
Posted: 3/19/2014 9:54:25 PM EDT
[#30]
I feel like an idiot now.
I ordered a Syma S107G - but got plastic-bodied off-brand junk. The worst part was that I didn't notice at first... I was so excited to get it that I charged it and flew it several times before realizing that it didn't match the description. Then I noticed that the box didn't have a name brand on it, and the remote control didn't look like the ones on the YouTube videos I was watching. This is after I've flown it for an hour, and my 5-year-old slammed it into the ceiling so hard that the inner shaft was knocked completely off the gears - and I tore it all the way down and repaired it by modifying the bushings on the shaft. Amazon is making it right, so no worries there. I just feel like I clicked on a link in an email advertising Viagra or something :( |
|
|
|
Posted: 3/19/2014 10:34:22 PM EDT
[#31]
OK, now this is funny - I'm surfing around looking for mods for the Syma I bought, and came across this link on Instructables: http://www.instructables.com/id/Syma-S107-Helicopter-Video-Hack/.
1 second into the video, and there's a BFL on screen. Arfcom is everywhere... |
|
|
|
Posted: 3/19/2014 11:10:59 PM EDT
[#32]
Quote HistoryQuoted:
OK, now this is funny - I'm surfing around looking for mods for the Syma I bought, and came across this link on Instructables: http://www.instructables.com/id/Syma-S107-Helicopter-Video-Hack/. 1 second into the video, and there's a BFL on screen. Arfcom is everywhere... All right, fess up, who posted that video? You obviously hang out over on the survival board also LOL |
|
|
|
Posted: 3/20/2014 1:18:45 PM EDT
[#33]
new mini-H quad I made last night.
custom carbon fiber 300mm frame with rubber dampening, 100g APM 2.6 w/ublox gps 433mhz LRS 1.3ghz 1w video pz0420 600tvl cam qbrain 20A x 4 esc 5" props, can fit 7" Sunnysky 2300kv 3s 1800mah 25c ~500g auw w batt  |
|
|
|
Posted: 3/20/2014 1:33:16 PM EDT
[#34]
Quote HistoryQuoted:
All right, fess up, who posted that video? You obviously hang out over on the survival board also LOL Quote HistoryQuoted:
Quoted:
OK, now this is funny - I'm surfing around looking for mods for the Syma I bought, and came across this link on Instructables: http://www.instructables.com/id/Syma-S107-Helicopter-Video-Hack/. 1 second into the video, and there's a BFL on screen. Arfcom is everywhere... All right, fess up, who posted that video? You obviously hang out over on the survival board also LOL And your TP backstock is insufficient. 
|
|
|
|
Posted: 3/20/2014 5:02:21 PM EDT
[#35]
Took a little trip to the range with the Phantom to see how it would do since my Nephew is getting married next weekend and one of his wishes was to take all his Groomsmen and a few friends shooting before the wedding. I told him I would take him to my range and try to get some great video of the event for future memories.
Todays trip was a success as there were zero glitches with the Phantom or either camera. Hopefully my other Phantom and a camera gimbal arrive tomorrow so I can test them before the event. I am cross posting this from my thread.
|
|
|
|
Posted: 3/20/2014 8:29:39 PM EDT
[#36]
Quote HistoryQuoted:
new mini-H quad I made last night. custom carbon fiber 300mm frame with rubber dampening, 100g APM 2.6 w/ublox gps 433mhz LRS 1.3ghz 1w video pz0420 600tvl cam qbrain 20A x 4 esc 5" props, can fit 7" Sunnysky 2300kv 3s 1800mah 25c ~500g auw w batt http://i62.tinypic.com/rjhb3o.jpg I am impressed with your ability to build and buy. You must have a store nearby to buy this stuff? My process is way slower, I build, and without fail will have forgotten to buy some critical part and will then order that part from China...Two weeks later the new gear will arrive and while installing that I'll find out I need something else that I neglected to see. Repeat, repeat. ....
No problems with the 433 right next to the VidRx antenna? |
|
|
|
Posted: 3/20/2014 8:35:31 PM EDT
[#37]
Oh and my first build project arrived today. DJI 920kv motor with matching 30 amp ESC, Naza lite GPS controller. LiftoffUAV waterproof Quad. These are 550 frames.
|
|
|
|
Posted: 3/20/2014 9:08:13 PM EDT
[#38]
Well I stuck my toe in the water and ordered a hubsan x4 h107c with the 2mp upgrade. Eventually I'd like something that can run waypoints around the property but that's a few projects down the priority list.
|
|
|
|
Posted: 3/20/2014 9:23:15 PM EDT
[#39]
This would be very useful to inspect the back side of my roof for missing tiles...
|
|
|
|
Posted: 3/20/2014 11:47:37 PM EDT
[#40]
Quote HistoryQuoted: I am impressed with your ability to build and buy. You must have a store nearby to buy this stuff? My process is way slower, I build, and without fail will have forgotten to buy some critical part and will then order that part from China...Two weeks later the new gear will arrive and while installing that I'll find out I need something else that I neglected to see. Repeat, repeat. .... No problems with the 433 right next to the VidRx antenna? Quote HistoryQuoted: Quoted: new mini-H quad I made last night. custom carbon fiber 300mm frame with rubber dampening, 100g APM 2.6 w/ublox gps 433mhz LRS 1.3ghz 1w video pz0420 600tvl cam qbrain 20A x 4 esc 5" props, can fit 7" Sunnysky 2300kv 3s 1800mah 25c ~500g auw w batt http://i62.tinypic.com/rjhb3o.jpg I am impressed with your ability to build and buy. You must have a store nearby to buy this stuff? My process is way slower, I build, and without fail will have forgotten to buy some critical part and will then order that part from China...Two weeks later the new gear will arrive and while installing that I'll find out I need something else that I neglected to see. Repeat, repeat. .... No problems with the 433 right next to the VidRx antenna? Got the carbon fiber parts and batts from Hobbyking with Swisspost takes 3 weeks. The tubes are good quality. I got some stuff like motors from multirotorsuperstore.com out of California, good guys. I sometimes order from Rctimer, got here in 1 week even during the Chinese New Year! amazing. My vTX is at 1258mhz, doesn't interfere with the Flytron Openlrs or vice versa. No glitches or anything and no video interference. If you are on 1280 like most guys, you might hit some interference on your video from harmonic 1299 depending on your rcTX. I am more worried about the gopro, it leaks 433 but I haven't tested it yet. I might have to wrap it in shield. OpenLRS frequency hops pretty well though. A Mobius cam is better suited. This thing is a god damn beast. SOOO much power on these motors. And even more on 6" props, but haven't flew those yet. Its a clone of a "Blackout mini-h quad". but lighter and with vibration isolation. So far I love this thing, the best FPV quad ever! eta: the motor mounts are garbage, hobbyking junk. Broke 3 today..... |
|
|
|
Posted: 3/21/2014 12:12:10 AM EDT
[#41]
I have 3 FPV folding antenna towers for sale and 2 kits. I made a few for some guys at RCgroups, I'll give you 20% off what they got.
You can mount it to your tripod or a car window mount. $50 shipped $30 shipped for the kit (minus the monopod which you can buy on Amazon for $15-20)   |
|
|
|
Posted: 3/21/2014 12:18:30 PM EDT
[#42]
Quote HistoryQuoted:
Got the carbon fiber parts and batts from Hobbyking with Swisspost takes 3 weeks. The tubes are good quality. I got some stuff like motors from multirotorsuperstore.com out of California, good guys. I sometimes order from Rctimer, got here in 1 week even during the Chinese New Year! amazing. My vTX is at 1258mhz, doesn't interfere with the Flytron Openlrs or vice versa. No glitches or anything and no video interference. If you are on 1280 like most guys, you might hit some interference on your video from harmonic 1299 depending on your rcTX. I am more worried about the gopro, it leaks 433 but I haven't tested it yet. I might have to wrap it in shield. OpenLRS frequency hops pretty well though. A Mobius cam is better suited. This thing is a god damn beast. SOOO much power on these motors. And even more on 6" props, but haven't flew those yet. Its a clone of a "Blackout mini-h quad". but lighter and with vibration isolation. So far I love this thing, the best FPV quad ever! eta: the motor mounts are garbage, hobbyking junk. Broke 3 today..... Quote HistoryQuoted:
Quoted:
Quoted:
new mini-H quad I made last night. custom carbon fiber 300mm frame with rubber dampening, 100g APM 2.6 w/ublox gps 433mhz LRS 1.3ghz 1w video pz0420 600tvl cam qbrain 20A x 4 esc 5" props, can fit 7" Sunnysky 2300kv 3s 1800mah 25c ~500g auw w batt http://i62.tinypic.com/rjhb3o.jpg I am impressed with your ability to build and buy. You must have a store nearby to buy this stuff? My process is way slower, I build, and without fail will have forgotten to buy some critical part and will then order that part from China...Two weeks later the new gear will arrive and while installing that I'll find out I need something else that I neglected to see. Repeat, repeat. ....
No problems with the 433 right next to the VidRx antenna? Got the carbon fiber parts and batts from Hobbyking with Swisspost takes 3 weeks. The tubes are good quality. I got some stuff like motors from multirotorsuperstore.com out of California, good guys. I sometimes order from Rctimer, got here in 1 week even during the Chinese New Year! amazing. My vTX is at 1258mhz, doesn't interfere with the Flytron Openlrs or vice versa. No glitches or anything and no video interference. If you are on 1280 like most guys, you might hit some interference on your video from harmonic 1299 depending on your rcTX. I am more worried about the gopro, it leaks 433 but I haven't tested it yet. I might have to wrap it in shield. OpenLRS frequency hops pretty well though. A Mobius cam is better suited. This thing is a god damn beast. SOOO much power on these motors. And even more on 6" props, but haven't flew those yet. Its a clone of a "Blackout mini-h quad". but lighter and with vibration isolation. So far I love this thing, the best FPV quad ever! eta: the motor mounts are garbage, hobbyking junk. Broke 3 today..... Nice build! Those sunnysky motors have plenty of power behind them for these little quads. Like you said, if you start swinging 6", you'll really be taking off! I'm using them on one of my Blackout mini-h builds and love them. The nooks and crannies you can shoot through with these little guys is tons of fun. You'll find the GoPro does leak plenty of noise in the 433, but I haven't found it to be a problem for control. Now it will give you trouble getting a GPS lock I've found. As you suspect, the mobius isn't as bad but still isn't great. Here's some fun I had yesterday.
.
|
|
|
|
Posted: 3/22/2014 12:03:53 AM EDT
[#43]
Quote HistoryQuoted: Here's some fun I had yesterday. http://vimeo.com/moogaloop.swf?clip_id=89640538&force_embed=1&server=vimeo.com&show_title=1&show_byline=1&show_portrait=1&color=00adef&fullscreen=1&autoplay=0&loop=0. http://vimeo.com/moogaloop.swf?clip_id=89674614&force_embed=1&server=vimeo.com&show_title=1&show_byline=1&show_portrait=1&color=00adef&fullscreen=1&autoplay=0&loop=0 |
|
|
|
Posted: 3/22/2014 1:02:39 AM EDT
[#44]
anyone have recommendations for sites to buy from?
|
|
|
|
Posted: 3/22/2014 4:00:13 AM EDT
[#45]
Quote HistoryQuoted: anyone have recommendations for sites to buy from? |
|
|
|
Posted: 3/23/2014 5:19:44 PM EDT
[#46]
Is there a place for new guys who have no idea what all this nomenclature means to learn? I want to build one for when I am hunting and scouting out in front of me a ways.
|
|
|
|
Posted: 3/23/2014 5:50:39 PM EDT
[#47]
Quote HistoryQuoted:
Is there a place for new guys who have no idea what all this nomenclature means to learn? I want to build one for when I am hunting and scouting out in front of me a ways. Ask and ye shall receive The Arfcom of RC. |
|
|
|
Posted: 3/23/2014 6:47:05 PM EDT
[#48]
Quote HistoryQuote HistoryQuoted:
Quoted:
Is there a place for new guys who have no idea what all this nomenclature means to learn? I want to build one for when I am hunting and scouting out in front of me a ways. Ask and ye shall receive The Arfcom of RC. This place has cost me a shit ton of money. Looks like I am in a new hobby! |
|
|
|
Posted: 3/23/2014 11:19:13 PM EDT
[#49]
Quote HistoryQuoted: depends what you are buying Quote HistoryQuoted: Quoted: anyone have recommendations for sites to buy from? I still need a radio and receiver. I was looking at a turnigy 9xr. I loaded everything up on the hobby king website, but the $35 on a 70 dollar order hurts. Any suggestions? For where to buy an rx, tx, and batteries? What about other replacement parts like props, arms, and motors? The closest hobby shop to me basically didn't have any quad parts in stock. |
|
|
|
Posted: 3/23/2014 11:41:57 PM EDT
[#50]
Make sure you are ordering from the US website not the international. That is why the shipping is so high.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
