User Panel
|
Originally Posted By Darkstar117:
There are dovetail to bayonet adapters, but not bayonet to dovetail adapters. You would need a new mount. View Quote View All Quotes View All Quotes Originally Posted By Darkstar117:
Originally Posted By QuickReactions:Norotos Rhino II (does anyone know of a dovetail adaptor that works with this mount?) There are dovetail to bayonet adapters, but not bayonet to dovetail adapters. You would need a new mount. You can remove the rear roll pin on the bottom of the mount to slide the bayonet adapter off, and replace it with one of these: http://tnvc.com/shop/norotos-pvs-15-pvs-18-socket-for-aka2-mount/ |
|
|
Originally Posted By murderman:
You can remove the rear roll pin on the bottom of the mount to slide the bayonet adapter off, and replace it with one of these: http://tnvc.com/shop/norotos-pvs-15-pvs-18-socket-for-aka2-mount/ View Quote View All Quotes View All Quotes Originally Posted By murderman:
Originally Posted By Darkstar117:
Originally Posted By QuickReactions:Norotos Rhino II (does anyone know of a dovetail adaptor that works with this mount?) There are dovetail to bayonet adapters, but not bayonet to dovetail adapters. You would need a new mount. You can remove the rear roll pin on the bottom of the mount to slide the bayonet adapter off, and replace it with one of these: http://tnvc.com/shop/norotos-pvs-15-pvs-18-socket-for-aka2-mount/ Thank you. I wasn't sure if those would be compatible or not. |
|
Speed, Surprise, Violence of Action
"Lobbest thou, thy holy hand grenade..." |
American by birth. Southern by the grace of God.
Any opinions expressed are my own and do not reflect upon any agency or organization with which I may be employed or affiliated. |
|
I piss excellence, bleed awesome, and fart class.
AL, USA
|
I posted a separate thread here, but since it's relevant I guess it belongs here, too.
(L) Team Wendy Ballistic, TW Peltor Adapter, ComTac IV, Wilcox G24, EOG LP CW, VIP NSW IR, PVS-15 + (R) Team Wendy LTP, TW Peltor Adapter, Howard Leight Sport, Norotos AKA2, EOG CW, NVBS-15: |
Why would you take anything I say seriously? My sole purpose for living is to get under your skin and piss you off.
|
Semper Fi
|
Originally Posted By Jeepinjoe17:
Finally got a dual tube setup! Thanks TNVC- This thing freaking rocks! Ops Core BASE Wilcox G24 BNVD-SG P+ <a href="http://imgur.com/ZaRC8SJ" target="_blank">http://i.imgur.com/ZaRC8SJl.jpg</a> Also, thanks for the ATPIAL-C that I got on the first order back in Dec! It finally completed my CQBR clone. <a href="http://imgur.com/2g4DwVf" target="_blank">http://i.imgur.com/2g4DwVfl.jpg</a> <a href="http://imgur.com/02JMzmq" target="_blank">http://i.imgur.com/02JMzmql.jpg</a> Sorry for the crappy iphone pics. View Quote All around a thing of beauty. The SG is definitely the BNVD model I'd want if I were getting one - hope to see plenty of reviews/user feedback! ~Augee |
|
|
Yeah I put a lot of thought into what setup I wanted and liked everything about the BNVD-SG more than any other setups. I thought dual gain might just be "too many things going on" or too much to fool with in the dark while chasing coyotes and hogs. I have enought switches and gear to mess with as is with rifles, lasers, lights, sights, varmint calls, thermal monocular, etc. didn't think I'd like having to take the time to get the gain on each tube adjusted correctly and the gain controls seemed a little exposed on the outsides of the tubes as well. The only thing I don't like about the BNVD is that I couldn't get TNVC to paint it FDE for me like my TNV/PVS-14 and they said my warranty would be voided by painting it myself no biggie though.
|
|
Semper Fi
|
Originally Posted By Jeepinjoe17:
Yeah I put a lot of thought into what setup I wanted and liked everything about the BNVD-SG more than any other setups. I thought dual gain might just be "too many things going on" or too much to fool with in the dark while chasing coyotes and hogs. I have enought switches and gear to mess with as is with rifles, lasers, lights, sights, varmint calls, thermal monocular, etc. didn't think I'd like having to take the time to get the gain on each tube adjusted correctly and the gain controls seemed a little exposed on the outsides of the tubes as well. The only thing I don't like about the BNVD is that I couldn't get TNVC to paint it FDE for me like my TNV/PVS-14 and they said my warranty would be voided by painting it myself no biggie though. View Quote Could always wrap it with vinyl if you wanted it FDE |
|
|
American by birth, Texan by the Grace of God.
|
Originally Posted By TCBA_Joe:
Put some work into my BASE Jump. Swapped the M952V for a Surefire helmet light. Butchered the new style helmet light mount and an ARC wing mount to make a workable and free SF HL>ARC adapter. Frankly I hate the SF HL but I can't afford to buy a newer light when I've got a couple floating around my gear box. I also added some 550 cord for dummy cording. The biggest thing I noticed is that the BASE is more stable and (obviously) lighter, but my TC2001 is much more comfortable, and with the SOE NSW Strobe pouch more balanced. I'm not terribly thrilled with how the BASE feels on my head, but I can't justify the Exfil at this point. The BASE feels properly fitted front to back, but not side to side, and it feels like the front hangs forward too much. Now if the weather would stop being so insanely cold and windy I have plans for this setup. (It's supposed to be -45 w/ wind during the day tomorrow ) http://i1308.photobucket.com/albums/s611/joe_freerider/20150107_161843_zpsmmhlwzuu.jpg http://i1308.photobucket.com/albums/s611/joe_freerider/20150107_215004_zpsjrawy9h6.jpg View Quote The TC2001 looks sick Joe. Especially with that woodland cover. Might consider setting my ACH up in a similar layout to yours while still keeping the multicam cover |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
|
Originally Posted By vanquished:
Could always wrap it with vinyl if you wanted it FDE View Quote View All Quotes View All Quotes Originally Posted By vanquished:
Originally Posted By Jeepinjoe17:
Yeah I put a lot of thought into what setup I wanted and liked everything about the BNVD-SG more than any other setups. I thought dual gain might just be "too many things going on" or too much to fool with in the dark while chasing coyotes and hogs. I have enought switches and gear to mess with as is with rifles, lasers, lights, sights, varmint calls, thermal monocular, etc. didn't think I'd like having to take the time to get the gain on each tube adjusted correctly and the gain controls seemed a little exposed on the outsides of the tubes as well. The only thing I don't like about the BNVD is that I couldn't get TNVC to paint it FDE for me like my TNV/PVS-14 and they said my warranty would be voided by painting it myself no biggie though. Could always wrap it with vinyl if you wanted it FDE That thought did cross my mind. I'll have to find some good flat colored vinyl that has a good adhesive that won't be peeling off when it gets wet/dirty, etc. |
|
Semper Fi
|
Originally Posted By MILSPEC556:
The TC2001 looks sick Joe. Especially with that woodland cover. Might consider setting my ACH up in a similar layout to yours while still keeping the multicam cover View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By TCBA_Joe:
Put some work into my BASE Jump. Swapped the M952V for a Surefire helmet light. Butchered the new style helmet light mount and an ARC wing mount to make a workable and free SF HL>ARC adapter. Frankly I hate the SF HL but I can't afford to buy a newer light when I've got a couple floating around my gear box. I also added some 550 cord for dummy cording. The biggest thing I noticed is that the BASE is more stable and (obviously) lighter, but my TC2001 is much more comfortable, and with the SOE NSW Strobe pouch more balanced. I'm not terribly thrilled with how the BASE feels on my head, but I can't justify the Exfil at this point. The BASE feels properly fitted front to back, but not side to side, and it feels like the front hangs forward too much. Now if the weather would stop being so insanely cold and windy I have plans for this setup. (It's supposed to be -45 w/ wind during the day tomorrow ) http://i1308.photobucket.com/albums/s611/joe_freerider/20150107_161843_zpsmmhlwzuu.jpg http://i1308.photobucket.com/albums/s611/joe_freerider/20150107_215004_zpsjrawy9h6.jpg The TC2001 looks sick Joe. Especially with that woodland cover. Might consider setting my ACH up in a similar layout to yours while still keeping the multicam cover Thanks. Also, the Pouch on the back is an OSOE NSW Strobe pouch for an MS2000 and also holds batteries. When the Army goes to multi-cam I probably will too. I just can't bring myself to get an ACU cover sewn for this when we're about to swap over from UCP. But when we do shooting events I use peltors which would work better with a high-cut. |
|
Please, call me Joe
There is definitely something perverse about two men who carry guns 24/7 being so happy that others are giving theirs up. -happycynic Jack Ryan 2016 |
Originally Posted By Jeepinjoe17:
That thought did cross my mind. I'll have to find some good flat colored vinyl that has a good adhesive that won't be peeling off when it gets wet/dirty, etc. View Quote View All Quotes View All Quotes Originally Posted By Jeepinjoe17:
Originally Posted By vanquished:
Originally Posted By Jeepinjoe17:
Yeah I put a lot of thought into what setup I wanted and liked everything about the BNVD-SG more than any other setups. I thought dual gain might just be "too many things going on" or too much to fool with in the dark while chasing coyotes and hogs. I have enought switches and gear to mess with as is with rifles, lasers, lights, sights, varmint calls, thermal monocular, etc. didn't think I'd like having to take the time to get the gain on each tube adjusted correctly and the gain controls seemed a little exposed on the outsides of the tubes as well. The only thing I don't like about the BNVD is that I couldn't get TNVC to paint it FDE for me like my TNV/PVS-14 and they said my warranty would be voided by painting it myself no biggie though. Could always wrap it with vinyl if you wanted it FDE That thought did cross my mind. I'll have to find some good flat colored vinyl that has a good adhesive that won't be peeling off when it gets wet/dirty, etc. It doesn't look like they offer it in coyote, but they do have a couple ATACS patterns, as well as Desert Digital - maybe this might work for you? Gun Skins - Camouflage Patterns I've never used them before, but there's a long thread on 'em in the Refinishing forum, and you can get them both in pre-cut patterns, as well as just sheets so you can make/cut custom patterns. ~Augee |
|
|
Originally Posted By Jeepinjoe17:
Finally got a dual tube setup! Thanks TNVC- This thing freaking rocks! Ops Core BASE Wilcox G24 BNVD-SG P+ <a href="http://imgur.com/ZaRC8SJ" target="_blank">http://i.imgur.com/ZaRC8SJl.jpg</a> Also, thanks for the ATPIAL-C that I got on the first order back in Dec! It finally completed my CQBR clone. <a href="http://imgur.com/2g4DwVf" target="_blank">http://i.imgur.com/2g4DwVfl.jpg</a> <a href="http://imgur.com/02JMzmq" target="_blank">http://i.imgur.com/02JMzmql.jpg</a> Sorry for the crappy iphone pics. View Quote Great setup. Was looking at these the other day and could not figure out what P+ designates? |
|
|
Originally Posted By BCV:
Work in progress. https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/10933964_993226755421_1474975510562290614_n.jpg?oh=33e8cd13dff982790d17e39318cfdc40&oe=5529917F&__gda__=1428948696_4848af04fbde111413ed834656326983 Haven't had the chance to run it yet since my NV order is still on backorder. View Quote Nice DBAL. |
|
|
Originally Posted By Augee:
It doesn't look like they offer it in coyote, but they do have a couple ATACS patterns, as well as Desert Digital - maybe this might work for you? Gun Skins - Camouflage Patterns I've never used them before, but there's a long thread on 'em in the Refinishing forum, and you can get them both in pre-cut patterns, as well as just sheets so you can make/cut custom patterns. ~Augee View Quote View All Quotes View All Quotes Originally Posted By Augee:
It doesn't look like they offer it in coyote, but they do have a couple ATACS patterns, as well as Desert Digital - maybe this might work for you? Gun Skins - Camouflage Patterns I've never used them before, but there's a long thread on 'em in the Refinishing forum, and you can get them both in pre-cut patterns, as well as just sheets so you can make/cut custom patterns. ~Augee Thanks for the heads-up! That desert digital might be just the ticket! Originally Posted By Great_Balls_of_Fire:
Originally Posted By Jeepinjoe17:
Great setup. Was looking at these the other day and could not figure out what P+ designates? The P+ option is the the hand-select tube option. I figured it was worth getting the P+ option since I was already spending that much. Another $400 isn't much at that point and well worth it for nice tubes. |
|
Semper Fi
|
dbl tap
|
|
Semper Fi
|
Originally Posted By MrPlayer:
Originally Posted By BCV:
Work in progress. https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/10933964_993226755421_1474975510562290614_n.jpg?oh=33e8cd13dff982790d17e39318cfdc40&oe=5529917F&__gda__=1428948696_4848af04fbde111413ed834656326983 Haven't had the chance to run it yet since my NV order is still on backorder. Nice DBAL. Yessir. Got everything set up today actually. Still waiting on the PVS14 from TNVC to play with it. |
|
American by birth, Texan by the Grace of God.
|
Nothing special but I took an old opmod head band and used the large strap with Velcro attached to and ran it through helmet to make myself a tie down point for lanyard. The strap had a loop in it already and then I tied off the shoe string that is normally on the cap in a knot at the hole coming out the pvs base leading to cap then some slack and tied off to cap and it was run through the loop on top of helmet two times.
Sorry I just finished with 2 degree's in College and I am paying my loans off and just started to work, once I get the funds I will get the real deal stuff from tnvc. Just wanted to show off what I do while bored at home haha. My fiance makes certain types of women clothing and she has a mannequin on a stand with the head and everything and I have been drop testing it for about 15 minutes and it falls just below your chin about middle of the neck. |
|
|
I LOVE LAMP
|
Ok, what is the bungee strap in the front for? I have one of my TW helmet and I have no idea what its there for.
|
|
American by birth, Texan by the Grace of God.
|
Please, call me Joe
There is definitely something perverse about two men who carry guns 24/7 being so happy that others are giving theirs up. -happycynic Jack Ryan 2016 |
Maybe my Google search techniques are bad, but I couldn't find any information on mounting Howard Leight Impact Sport earmuffs to helmets in a similar manner as Peltor/Sordin earmuffs.
I purchased a few a while back during some sales and figured they'd be useful on a helmet. However can't figure out if the Sordin adaptors would work and how to go about it. |
|
|
Originally Posted By Veers57:
Maybe my Google search techniques are bad, but I couldn't find any information on mounting Howard Leight Impact Sport earmuffs to helmets in a similar manner as Peltor/Sordin earmuffs. I purchased a few a while back during some sales and figured they'd be useful on a helmet. However can't figure out if the Sordin adaptors would work and how to go about it. View Quote Horta did a thread on this a couple weeks ago. http://www.ar15.com/forums/t_6_18/438498_Team_Wendy___TW_Peltor_Adapter___Howard_Leight_Ear_Pro.html |
|
Please, call me Joe
There is definitely something perverse about two men who carry guns 24/7 being so happy that others are giving theirs up. -happycynic Jack Ryan 2016 |
Thanks, just what I was looking for. Thought I had seen something before, but wasn't sure.
|
|
|
|
Please, call me Joe
Follow me on Instagram! http://instagram.com/tcba_joe/ |
" />
|
|
|
" />
" /> " /> And My Girlfriend's rig " /> |
|
|
Player,
What counterweight setup is that on your TW rig? |
|
|
I piss excellence, bleed awesome, and fart class.
AL, USA
|
|
Why would you take anything I say seriously? My sole purpose for living is to get under your skin and piss you off.
|
Originally Posted By Spook522:
Player, What counterweight setup is that on your TW rig? View Quote Its an Ops core counterweight bolted to the back, reversed in the "closing " and a first spear IR name tape on the back. Sadly I was cursed from the get go and born a "Player" I have both the weights and batteries in the slots. |
|
|
Originally Posted By TheHorta:
It's a Rhino's nutsack filled with Player's special Awesome Sauce recipe. View Quote View All Quotes View All Quotes Originally Posted By TheHorta:
Originally Posted By Spook522:
Player, What counterweight setup is that on your TW rig? It's a Rhino's nutsack filled with Player's special Awesome Sauce recipe. The awesome sauce is called "The Shane Special" ......don't ask. |
|
|
Originally Posted By TCBA_Joe:
Here's a 360 of my current helmet setup. It's only missing 1 part at this point, but I'll post a picture when I get it and get the go-ahead from Vic. OC FAST BASE OC Counter-weight Norotos AKA2 TNV/PVS-14 SF Helmet light (not the best light IMO) Smith Boogie Regulators Contour on ARC mount http://i1308.photobucket.com/albums/s611/joe_freerider/Mobile%20Uploads/20150131_172238_zpsscpdipew.jpg http://i1308.photobucket.com/albums/s611/joe_freerider/Mobile%20Uploads/20150131_172302_zpsgwtkx3xc.jpg http://i1308.photobucket.com/albums/s611/joe_freerider/Mobile%20Uploads/20150131_172320_zps0aw1ajzn.jpg http://i1308.photobucket.com/albums/s611/joe_freerider/Mobile%20Uploads/20150131_172339_zpsswmn5bgz.jpg View Quote Love the crossed ice axe patch!! |
|
have gun will travel
Well you seen much combat? ......... I've seen a little on TV. We are jolly green giants, walking the Earth with guns. Lifetime NRA member |
Originally Posted By MrPlayer:
Its an Ops core counterweight bolted to the back, reversed in the "closing " and a first spear IR name tape on the back. Sadly I was cursed from the get go and born a "Player" I have both the weights and batteries in the slots. View Quote View All Quotes View All Quotes Originally Posted By MrPlayer:
Originally Posted By Spook522:
Player, What counterweight setup is that on your TW rig? Its an Ops core counterweight bolted to the back, reversed in the "closing " and a first spear IR name tape on the back. Sadly I was cursed from the get go and born a "Player" I have both the weights and batteries in the slots. Thanks, I thought maybe that is what it was, but I didn't know if the straps would work on a TW rig. I like that feature. |
|
|
Originally Posted By dayphotog:
Love the crossed ice axe patch!! View Quote View All Quotes View All Quotes Originally Posted By dayphotog:
Originally Posted By TCBA_Joe:
Here's a 360 of my current helmet setup. It's only missing 1 part at this point, but I'll post a picture when I get it and get the go-ahead from Vic. OC FAST BASE OC Counter-weight Norotos AKA2 TNV/PVS-14 SF Helmet light (not the best light IMO) Smith Boogie Regulators Contour on ARC mount http://i1308.photobucket.com/albums/s611/joe_freerider/Mobile%20Uploads/20150131_172238_zpsscpdipew.jpg http://i1308.photobucket.com/albums/s611/joe_freerider/Mobile%20Uploads/20150131_172302_zpsgwtkx3xc.jpg http://i1308.photobucket.com/albums/s611/joe_freerider/Mobile%20Uploads/20150131_172320_zps0aw1ajzn.jpg http://i1308.photobucket.com/albums/s611/joe_freerider/Mobile%20Uploads/20150131_172339_zpsswmn5bgz.jpg Love the crossed ice axe patch!! Thanks. I have a couple. I've got the black one in my avatar on a jacket. |
|
Please, call me Joe
Follow me on Instagram! http://instagram.com/tcba_joe/ |
Originally Posted By MrPlayer:
http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg1_zpsc7364fa5.jpg</a>" /> http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg4_zps67f10044.jpg</a>" /> http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg3_zpse3c6f871.jpg</a>" /> And My Girlfriend's rig http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg2_zpsd9be64d0.jpg</a>" /> View Quote Glenfiddich. I like your style. |
|
|
|
|
|
Originally Posted By ridewaves:
Glenfiddich. I like your style. View Quote View All Quotes View All Quotes Originally Posted By ridewaves:
Originally Posted By MrPlayer:
http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg1_zpsc7364fa5.jpg</a>" /> http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg4_zps67f10044.jpg</a>" /> http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg3_zpse3c6f871.jpg</a>" /> And My Girlfriend's rig http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg2_zpsd9be64d0.jpg</a>" /> Glenfiddich. I like your style. Thank you sir, but according to this thread I don't even own that bottle of scotch. Pics, Just Pics Tanner, your rig makes me want a Black TW. |
|
|
Am I The Horta yet?
" /> |
|
|
Originally Posted By MrPlayer:
http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg1_zpsc7364fa5.jpg</a>" /> http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg4_zps67f10044.jpg</a>" /> http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg3_zpse3c6f871.jpg</a>" /> And My Girlfriend's rig http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg2_zpsd9be64d0.jpg</a>" /> View Quote Player, Where did you get your IR nametape made? Nice looking setup! |
|
Semper Fi
|
Originally Posted By Jeepinjoe17:
Player, Where did you get your IR nametape made? Nice looking setup! View Quote View All Quotes View All Quotes Originally Posted By Jeepinjoe17:
Originally Posted By MrPlayer:
http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg1_zpsc7364fa5.jpg</a>" /> http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg4_zps67f10044.jpg</a>" /> http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg3_zpse3c6f871.jpg</a>" /> And My Girlfriend's rig http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg2_zpsd9be64d0.jpg</a>" /> Player, Where did you get your IR nametape made? Nice looking setup! First Spear makes them, TNVC sells them to LEO/MIL with a minimum order(6 I think) and there are some outfits in EGAY that will custom make them as well. |
|
|
|
Originally Posted By MrPlayer:
First Spear makes them, TNVC sells them to LEO/MIL with a minimum order(6 I think) and there are some outfits in EGAY that will custom make them as well. View Quote View All Quotes View All Quotes Originally Posted By MrPlayer:
Originally Posted By Jeepinjoe17:
Originally Posted By MrPlayer:
http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg1_zpsc7364fa5.jpg</a>" /> http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg4_zps67f10044.jpg</a>" /> http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg3_zpse3c6f871.jpg</a>" /> And My Girlfriend's rig http://<a href=http://i91.photobucket.com/albums/k281/MrPlayer/imagejpg2_zpsd9be64d0.jpg</a>" /> Player, Where did you get your IR nametape made? Nice looking setup! First Spear makes them, TNVC sells them to LEO/MIL with a minimum order(6 I think) and there are some outfits in EGAY that will custom make them as well. Cool. Thanks. |
|
Semper Fi
|
Originally Posted By M0244:
Did an all in one shot, just got my sentinels in today working great. Though I might add a bit more weight to the back somehow I did away with the battery pack cover/pouch it's velcro wasn't holding tight enough for me. Need to find something other than another strobe to throw on the back, may do a small pocket of 123s. Anyway here it goes: <a href="http://smg.photobucket.com/user/Slayer-LongShot/media/c0eac96f-1d11-4aeb-b4cd-6a8e155fe8f3_zpse55fae61.jpg.html" target="_blank">http://img.photobucket.com/albums/v198/Slayer-LongShot/c0eac96f-1d11-4aeb-b4cd-6a8e155fe8f3_zpse55fae61.jpg</a> View Quote What I lenses/filters do you have on the front? |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.