User Panel
User Panel
User Panel
LA, USA
|
Posted: 3/26/2010 1:29:21 PM EDT
[#1]
Originally Posted By AZ-AR15:
Originally Posted By SaturationTech:
First post here, first build http://i170.photobucket.com/albums/u247/SaturationTech/68%20SBR/2.jpg http://i170.photobucket.com/albums/u247/SaturationTech/68%20SBR/3.jpg S&W M&P lower Vultor Mur upper Stag 6.8 SPC bolt and carrier Noveske 10.5" 6.8SPC barrel Noveske Switchblock Daniel Defence 9.5" FSP rail Magpul goodness Tango Down VFG I'm glad you posted this as I was just wondering today whether or not the switch block would work with DD's FSP rails. Nice AR btw Well, the 9.5 FSP with the 10.5" barrel required a small dremel mod to the rail. I could only access 1 of the 2 clamp screws on the switchblock. I had to remove a small portion of the rail to allow access to the 2nd screw. I'll try and take a close up pic later today and post it. It is a bit of a PITA to get the rail and switchblock installed. Requires some finagaling (sp??). I'm not sure if a MK4-2000 will fit either. I'll find out here towards the end of the year when I get around to buying one. |
|
|
|
Posted: 3/26/2010 5:12:22 PM EDT
[#2]
Upper:
Vltor MUR-1A upper receiver Noveske 10.5" CQB KGCoated black by ADCO Bravo Co. BCG Daniel Defense M4 10.0 Noveske KX3 Troy BUIS Streamlight TLR-1 EOTech XPS 2-0 Lower: C3 Defense Billet lower WOA lower parts kit UBR (balances out the KX3 perfectly) 
|
|
|
|
LA, USA
|
Posted: 3/26/2010 8:08:30 PM EDT
[#3]
Here's a close up of the modification I had to make to the DD 9.5"FSP rail in order to fit the Noveske Switchblock in.
http://i170.photobucket.com/albums/u247/SaturationTech/Closeup-1.jpg The frontmost screw was blocked by part of the rail. 2 quick horizontal cuts and a touchup pen and all is good. Oh, and man that thing has some range dust and crud on it...Need to get to cleaning. |
|
|
FL, USA
|
Posted: 3/26/2010 10:59:41 PM EDT
[Last Edit: mattman06]
[#4]
My first build.
RockRiver upper and lower Rockriver 16" chrome lined chromoloy barrel Eotech xs2 YHM gas block and BUIS Midwest Industries 7 1/2" single piece floating handguard Aimshot green laser UTG LED tactical light tapco vertical foregrip tapco rail guards badger tactical latch 2 stage trigger group C products stainless magazines homebuilt light and laser switch assemby http://i15.photobucket.com/albums/a400/mattman06/IMG_0856.jpghttp://i15.photobucket.com/albums/a400/mattman06/IMG_0848.jpg |
|
|
FL, USA
|
Posted: 3/26/2010 11:16:05 PM EDT
[Last Edit: mattman06]
[#5]
|
|
|
OH, USA
|
Posted: 3/27/2010 8:24:42 PM EDT
[#6]
Originally Posted By CrewChief65:
http://img511.imageshack.us/img511/9268/sbr1.jpg http://img534.imageshack.us/img534/8363/sbr2.jpg http://img716.imageshack.us/img716/5835/sbr3.jpg http://img716.imageshack.us/img716/1151/sbr4.jpg http://img716.imageshack.us/img716/6990/sbr5.jpg http://img337.imageshack.us/img337/1812/sbr6.jpg First Build, First post here: Tactical Innovations Lower Adco / WoA Lower Parts Kit Giselle SSA Trigger VOLTR MUR1 Upper BCM BFH 11.5" Barrell VTAC Extreme 11" Rail KAC Triple Tap Brake DD Fixed sights DD T-1 Mount Aimpoint T-1 BCM Gunfighter CH Mod 4 Magpul Goodness: MIAD, CTR, ASAP and MS2 That so needs a drum mag...  that tyhing looks liek it jumped out of a gundamn wing anime.
|
|
|
|
Posted: 3/27/2010 10:46:36 PM EDT
[#7]
Just completed my BCM 20" M16A3 Clone, here's the specs.
BCM 20" upper BCM BCG Stag lower with A2 stock A3 carry handle 
|
|
|
|
OH, USA
|
Posted: 3/28/2010 4:08:35 AM EDT
[#8]
My first build took me about a month and 1/2 to complete i used a few weeks pays on this...
http://i21.photobucket.com/albums/b261/famasdan/upup2.jpg http://i21.photobucket.com/albums/b261/famasdan/IMG_5371.jpg Kac FF Ras short rail DD 4150 steel 16" chrome lined barrel 40L rear sight Pri flip up front sight with fat boy gas tube fail Zero Bcg magpul Afg ergo rail covers fenix tk12 light single point sling loop back plate i think its made for blackhawk" Troy medieval muzzle brake http://i21.photobucket.com/albums/b261/famasdan/IMG_5360.jpg ************************************* ========================= http://i21.photobucket.com/albums/b261/famasdan/IMG_5375.jpg |
|
|
NY, USA
|
Posted: 3/28/2010 4:53:14 PM EDT
[#9]
....More pics of my $55- dollar ShARps lower project… From Fiocchi 40 grain V-max .223 I’ve getting groups like the one pictured below and from M193 It’s been producing 1.5MOA 10 shot groups too.
http://i930.photobucket.com/albums/ad149/762CETME/More_ShARps_003.jpg |
|
|
OH, USA
|
Posted: 3/29/2010 1:51:31 AM EDT
[#10]
Originally Posted By 762CETME:
....More pics of my $55- dollar ShARps lower project… From Fiocchi 40 grain V-max .223 I’ve getting groups like the one pictured below and from M193 It’s been producing 1.5MOA 10 shot groups too. http://i930.photobucket.com/albums/ad149/762CETME/More_ShARps_003.jpg paint the grip sunburst orange |
|
|
|
Posted: 3/29/2010 3:57:06 AM EDT
[#11]
762CETME,
First, nice rifle, and excellent groups. Would you mind telling me what kind of trigger you are using? |
|
|
|
NY, USA
|
Posted: 3/29/2010 5:34:51 PM EDT
[#12]
Originally Posted By mdguy90:
762CETME, First, nice rifle, and excellent groups. Would you mind telling me what kind of trigger you are using? The trigger is from a run-of-the-mill CMMG LPK (CMMG I think makes a very good lower parts kit) and also I introduced a 10-32 “Superior Arms” style adjustment screw that runs behind and parallel to the lower's 1/4-28 grip screw to help things along too. It breaks at around 1 pound or so w/ very little creep once adjusted. Plus, I’ve added a steel shoe shown in the photo. http://www.aimsurplus.com/product.aspx?item=XCMMGLPK&groupid=53 |
|
|
TX, USA
|
Posted: 3/29/2010 8:46:15 PM EDT
[#13]
My toy
http://farm5.static.flickr.com/4062/4473952945_888ed06bfe_b.jpg Charles Daly lower Generic flat top upper M4 profile barrel and M4 feed ramps LaRue Tactical 9" free float rail, low pro gas block, and M68 CCO Magpul CTR stock, mags, triggerguard, and MBUS Aimpoint ML2 Surefire M951 light |
|
|
|
Posted: 3/29/2010 9:01:02 PM EDT
[#14]
now that kicks ass!
Originally Posted By 762CETME: Finally completed my $55 dollar ShARps Arms lower project!! (from R-Guns)… Its range testing will be tomorrow... http://i930.photobucket.com/albums/ad149/762CETME/ShARps%20AR15/ShARps_01.jpg http://i930.photobucket.com/albums/ad149/762CETME/ShARps%20AR15/ShARps_02.jpg http://i930.photobucket.com/albums/ad149/762CETME/ShARps%20AR15/ShARps_03.jpg http://i930.photobucket.com/albums/ad149/762CETME/ShARps%20AR15/ShARps_04.jpg http://i930.photobucket.com/albums/ad149/762CETME/ShARps%20AR15/ShARps_05.jpg |
|
|
|
NY, USA
|
Posted: 3/29/2010 11:29:34 PM EDT
[#15]
http://ncpd.net/images/104_0039.JPG
Bushy on the left factory, other two ground up builds by me on LRB lowers. 
|
|
|
USA
|
Posted: 3/30/2010 1:36:26 AM EDT
[Last Edit: KikuSui]
[#16]
Heres my SBR, its mostly done, just need a good pair of BUIS. Its a RRA upper and lower with a 10.5 in barrel, 1/7 twist. I put a DPMS LPK in because I wanted something that could handle some harsh circumstances better than your average match trigger. I also added a BAD lever and attached a YHM flash hider so I can put my can on. I did the paint job with some Krylon and fish netting. This is the first rifle I put together. Ive been very happy with RRA products in the past so I figured Id stick with a good thing.
I got the required engraving for it done by Jim of Harford engraving in MD. Hes a top notch guy, did the whole thing and added the skull I wanted in about 25 minutes. He was also very willing to answer all of my questions, all in all; I highly recommend his services. http://i81.photobucket.com/albums/j237/Kiku_Sui/downsized_0309001329.jpg http://i81.photobucket.com/albums/j237/Kiku_Sui/IMG_1430e.jpg |
|
|
AZ, USA
|
Posted: 3/31/2010 3:05:35 AM EDT
[#17]
Here is my first build:
RRA Upper and Lower RRA 6 Position Collapsible Stock 5.56 bore 16" chromolly barrel 1/9 twist 2 Stage National Match Trigger A.R.M.S. flip-up rear sight Mako Picatinny Rail w/ covers FAB T-Pod Tactical Fore Grip\Bipod w/ tactical light Holmade 3-Point Sling http://i35.photobucket.com/albums/d163/ZeroG21/1269630044.jpg http://i35.photobucket.com/albums/d163/ZeroG21/1269629682.jpg |
|
|
KY, USA
|
Posted: 3/31/2010 11:17:31 AM EDT
[#18]
LMT SOPMOD lower and 5.56 upper recently converted to 7.62x39
Cerakoted upper and lower––––no pics 
making lo-profile gas block out of FSB 
M4 feedramps line up well with the Shaw barrel 
Putting TLR-1 on Troy MRF-R (12") rail. FH is Vortex 9mm (.355") threaded 1/2x36. Perfect for .308 ammo 
Left of weapon 
Finished.....pretty much....maybe not. It needs barrel flutes.... 
Not pictured––––added Wolff extra power hammer spring and Model 1 Sales enhanced 7.62x39 firing pin. |
|
|
NY, USA
|
Posted: 3/31/2010 9:42:14 PM EDT
[#19]
My work in progress after a great day at the fun show last weekend. Still waiting on a couple parts.Hated the stock grip got a houge on order then I need to get some glass for it.
http://i151.photobucket.com/albums/s127/fedrusion/stuff%20that%20goes%20bang/IMG_0545.jpg |
|
|
CA, USA
|
Posted: 4/2/2010 5:23:12 PM EDT
[#20]
http://farm3.static.flickr.com/2698/4482082531_4befb8b6b7_o.jpg
Here is a picture of my build that my brother did for his photo shoot.. |
|
|
NJ, USA
|
Posted: 4/2/2010 5:34:21 PM EDT
[#21]
Just finished my first AR build.
RRA upper and lower YHM lightweight rail YHM 14.5" barrel Aimpoint Compm4s http://i203.photobucket.com/albums/aa271/sgarron/ar15/ar15002.jpg http://i203.photobucket.com/albums/aa271/sgarron/ar15/ar15003.jpg http://i203.photobucket.com/albums/aa271/sgarron/ar15/ar15004.jpg Can't wait to start the next one with the 20" LW barrel I just picked up. |
|
|
MI, USA
|
Posted: 4/2/2010 8:44:36 PM EDT
[#22]
Arfcom style.....
bushy 16in m4 upper arfcom lower tango down grip vltor eo tech arms buis various magpul trinkets gonna shoot it like this for a little ,then ive got a moe forearm to try out,my old arms sir might even get on there .......
|
|
|
|
Posted: 4/2/2010 9:41:57 PM EDT
[#23]
Very nice indeed...
|
|
|
|
NY, USA
|
Posted: 4/2/2010 10:18:01 PM EDT
[Last Edit: 556ForLife]
[#24]
FIRST BUILD
Just waiting on my Adams Arms Piston kit and trying to decide EOTech or Aimpoint http://i13.photobucket.com/albums/a285/CPSpecV03/DPP_0254.jpg Stag Lower RRA LPK RRA 2 Stage Trigger Stag Upper and bolt Assembly Samson Rail Magpul Miad Grip Magpul CTR Magpul Trigger Guard |
|
|
GA, USA
|
Posted: 4/3/2010 5:28:31 PM EDT
[#25]
Here's my build. Sorry for the more artsy than informative pics.
Stag Arms Upper 16" barrel in 5.56NATO Cavalry Arms CAV-15 MK II Lower with parts kit Since these photos I've gotten some PMags for it but that's about it. http://students.kennesaw.edu/~mbradfo7/pics/cav15-3.jpg http://students.kennesaw.edu/~mbradfo7/pics/cav15-1.jpg http://students.kennesaw.edu/~mbradfo7/pics/cav15-2.jpg I'd like to get optics on it, possibly a 1X Aimpoint and then a 3x magnafier, then some rails. |
|
|
CA, USA
|
Posted: 4/4/2010 1:41:58 AM EDT
[#26]
This is a sweet rig. Almost exactly what I aim to do with my first build (in progress).
|
|
|
NY, USA
|
Posted: 4/4/2010 10:34:19 PM EDT
[Last Edit: 762CETME]
[#27]
Here, I’ll showboat around a few more pics of my other creation sourced from TNW and CenterFire Systems that I finished-up about 4-5 months ago… Overall I’m very pleased w/ it and it shoots great too!… The only somewhat minor complaint is w/ my Rock River LPK, which despite all the hype, was not nearly as nice as the CMMG LPKs’ I used in the past, but that has no bearing on the quality of the lower receiver itself…
$69 for the upper and $69 for the lower, I think that it was very good value… Lower Receiver – TNW ~~ On Sale for $69- http://www.centerfiresystems.com/ARLOWER-MACH.aspx Upper Reciever – TNW ~~ $69- http://www.centerfiresystems.com/arup-a3stripped.aspx Bolt Carrier –– Daniel Defense (I’ve milled around an inch off the inside 'lip' of the tail end of the bolt carrier to permanently comvert it from an M16's layout to an AR15's) ~~ $135- http://www.aimsurplus.com/product.aspx?item=XDD9300&groupid=55 Grip –– Magpul MOE ~~ $19.99 http://www.aimsurplus.com/product.aspx?item=XMAG415DKEAR&groupid=58 Barrel – DPMS ~~ On sale $145- http://www.midwayusa.com/viewProduct/?productNumber=117068 Free Float Hand Guard – DPMS ~~ $52- (If you broil a black anodized surface finish at 600 degrees for an hour or more it turns a gold/copper color…) http://www.pkfirearms.com LPK – Rock River Standard Two Stage Trigger (Gun Broker – Grand Total –– $62-) Butt Stock – Home Depot ~~ $25ish Recoil Pad – Herters (Gun Broker – Grand Total ~~ $16) And then add in another $100 –– $150 for all the other bits and pieces So, I’ve around $700ish in rifle itself and then add in the scope w/ its mount it's more like $785ish grand total… The ammo it likes the best is Fiocchi 40gr and 50gr .223 and it does very well w/ the standard M193 stuff too! http://i930.photobucket.com/albums/ad149/762CETME/2.jpg http://i930.photobucket.com/albums/ad149/762CETME/1.jpghttp://i930.photobucket.com/albums/ad149/762CETME/3.jpg |
|
|
VT, USA
|
Posted: 4/5/2010 2:05:22 AM EDT
[#28]
http://i116.photobucket.com/albums/o10/CFDAlden/myar.jpg
Here's my Mutt AR. :) Now to try and find some damn 223 around here....
|
|
|
GA, USA
|
Posted: 4/5/2010 12:57:45 PM EDT
[#29]
Originally Posted By Goingsick:
This is a sweet rig. Almost exactly what I aim to do with my first build (in progress). Thanks. It's pretty no frills but it runs great and for a budget build I got some pretty quality parts. I might upgrade to a BCM upper with a middy gas system down the road. |
|
|
|
Posted: 4/5/2010 9:26:53 PM EDT
[Last Edit: wshbrngr]
[#30]
My first carbine: (Completed today)
Daniel Defense: DDXV Upper Receiver: A4 Upper Receiver with M4 Feed Ramps Barrel Characteristics: 16″ Cold Hammer Forged, 5.56 NATO Chamber, 1:7 Twist, Govt Profile, Carbine Length Gas Port, Chrome Lined, Mil Spec Heavy Phosphate Coated, HP and MPI tested Bolt Carrier Group: F/A BCG, HP and MPI Tested, Shot Peened Bolt, Extractor Booster, Properly Staked Gas Key Flash Hider: A2 Bird Cage Flash Hider Sights: A1.5 Fixed Rear Sight; F Marked Front Sight Base Rock River Arms: Lower Receiver Lower parts kit Magpul: MOE handguards, MOE grip CTR stock P-Mag (my first) w/ranger plate Elzetta: ZFH-1500 light mount w/Surefire G2 and optional rail added (rear side) 
|
|
|
|
MI, USA
|
Posted: 4/5/2010 11:38:28 PM EDT
[Last Edit: iansouth]
[#31]
Del-Ton M4 Kit (1x7 CL)
Spikes Lower YHM Specter Length Diamond Rail YHM Specter Gas Block Magpul MOE Stock Magpul AFG Magpul MOE Trigger Guard Magpul MBUS Just put it together today, still soaked in oil from Del-Ton
http://i91.photobucket.com/albums/k282/iancrumb/P4050029.jpg |
|
|
CA, USA
|
Posted: 4/6/2010 3:57:40 PM EDT
[#32]
|
|
|
|
Posted: 4/6/2010 11:37:52 PM EDT
[#33]
How's that KAC Triple Tap Brake workin' out for ya...? Pricey piece a' gear. |
|
|
|
|
Posted: 4/7/2010 11:53:02 AM EDT
[#34]
My first build.
|
|
|
|
NC, USA
|
Posted: 4/7/2010 4:54:37 PM EDT
[#35]
Originally Posted By 762CETME:
Here, I’ll showboat around a few more pics of my other creation sourced from TNW and CenterFire Systems that I finished-up about 4-5 months ago… Overall I’m very pleased w/ it and it shoots great too!… The only somewhat minor complaint is w/ my Rock River LPK, which despite all the hype, was not nearly as nice as the CMMG LPKs’ I used in the past, but that has no bearing on the quality of the lower receiver itself… $69 for the upper and $69 for the lower, I think that it was very good value… Lower Receiver – TNW ~~ On Sale for $69- http://www.centerfiresystems.com/ARLOWER-MACH.aspx Upper Reciever – TNW ~~ $69- http://www.centerfiresystems.com/arup-a3stripped.aspx Bolt Carrier –– Daniel Defense (I’ve milled around an inch off the inside 'lip' of the tail end of the bolt carrier to permanently comvert it from an M16's layout to an AR15's) ~~ $135- http://www.aimsurplus.com/product.aspx?item=XDD9300&groupid=55 Grip –– Magpul MOE ~~ $19.99 http://www.aimsurplus.com/product.aspx?item=XMAG415DKEAR&groupid=58 Barrel – DPMS ~~ On sale $145- http://www.midwayusa.com/viewProduct/?productNumber=117068 Free Float Hand Guard – DPMS ~~ $52- (If you broil a black anodized surface finish at 600 degrees for an hour or more it turns a gold/copper color…) http://www.pkfirearms.com LPK – Rock River Standard Two Stage Trigger (Gun Broker – Grand Total –– $62-) Butt Stock – Home Depot ~~ $25ish Recoil Pad – Herters (Gun Broker – Grand Total ~~ $16) And then add in another $100 –– $150 for all the other bits and pieces So, I’ve around $700ish in rifle itself and then add in the scope w/ its mount it's more like $785ish grand total… The ammo it likes the best is Fiocchi 40gr and 50gr .223 and it does very well w/ the standard M193 stuff too! http://i930.photobucket.com/albums/ad149/762CETME/2.jpg http://i930.photobucket.com/albums/ad149/762CETME/1.jpghttp://i930.photobucket.com/albums/ad149/762CETME/3.jpg No offense, but that is possibly the ugliest rifle I've ever seen. |
|
|
CO, USA
|
Posted: 4/7/2010 7:24:16 PM EDT
[Last Edit: JDF]
[#36]
My first build
|
|
|
TX, USA
|
Posted: 4/7/2010 10:46:44 PM EDT
[#37]
Originally Posted By brotherzoo:
How's that KAC Triple Tap Brake workin' out for ya...? Pricey piece a' gear. Working out really well so far. Not sure if it is absolutely worth the coin but if I decide to sell it I shouldn't loose much money. I have been shooting long enough to know that there is no majic piece of gear that will make you a good shooter. Only well designed pieces of gear that will make a well trained shooter better. |
|
|
|
Posted: 4/8/2010 4:06:41 PM EDT
[#38]
LMT 1/7 upper
Rock River lower SOPMOD Stock Daniel Defense rail Troy sights Trijicon ACOG Ergo grip Daniel Defense gas block Magpul trigger guard ModPod BAD lever Gear Sector sling 
|
|
|
|
FL, USA
|
Posted: 4/8/2010 11:41:14 PM EDT
[Last Edit: EKKsoldier622]
[#39]
DSA Chrome Lined 1:7 Upper
DSA BCG & CH Spikes Tactical Lower Daniel Defense Parts Kit DSA Buffer Mil-Spec Tube Assembly Kit Magpul MOE Mil-Spec Stock MBUS Rear Sight Magpul PMAG 
|
|
|
NY, USA
|
Posted: 4/9/2010 8:17:00 PM EDT
[#40]
Originally Posted By patrickm1587:
Originally Posted By 762CETME:
Here, I’ll showboat around a few more pics of my other creation sourced from TNW and CenterFire Systems that I finished-up about 4-5 months ago… Overall I’m very pleased w/ it and it shoots great too!… The only somewhat minor complaint is w/ my Rock River LPK, which despite all the hype, was not nearly as nice as the CMMG LPKs’ I used in the past, but that has no bearing on the quality of the lower receiver itself… $69 for the upper and $69 for the lower, I think that it was very good value… Lower Receiver – TNW ~~ On Sale for $69- http://www.centerfiresystems.com/ARLOWER-MACH.aspx Upper Reciever – TNW ~~ $69- http://www.centerfiresystems.com/arup-a3stripped.aspx Bolt Carrier –– Daniel Defense (I’ve milled around an inch off the inside 'lip' of the tail end of the bolt carrier to permanently comvert it from an M16's layout to an AR15's) ~~ $135- http://www.aimsurplus.com/product.aspx?item=XDD9300&groupid=55 Grip –– Magpul MOE ~~ $19.99 http://www.aimsurplus.com/product.aspx?item=XMAG415DKEAR&groupid=58 Barrel – DPMS ~~ On sale $145- http://www.midwayusa.com/viewProduct/?productNumber=117068 Free Float Hand Guard – DPMS ~~ $52- (If you broil a black anodized surface finish at 600 degrees for an hour or more it turns a gold/copper color…) http://www.pkfirearms.com LPK – Rock River Standard Two Stage Trigger (Gun Broker – Grand Total –– $62-) Butt Stock – Home Depot ~~ $25ish Recoil Pad – Herters (Gun Broker – Grand Total ~~ $16) And then add in another $100 –– $150 for all the other bits and pieces So, I’ve around $700ish in rifle itself and then add in the scope w/ its mount it's more like $785ish grand total… The ammo it likes the best is Fiocchi 40gr and 50gr .223 and it does very well w/ the standard M193 stuff too! http://i930.photobucket.com/albums/ad149/762CETME/2.jpg http://i930.photobucket.com/albums/ad149/762CETME/1.jpghttp://i930.photobucket.com/albums/ad149/762CETME/3.jpg No offense, but that is possibly the ugliest rifle I've ever seen. None taken, I just didn’t want to reinvent the wheel... |
|
|
VT, USA
|
Posted: 4/10/2010 3:26:14 PM EDT
[#41]
http://benhaulenbeek.com/AR15/A1_dissy_1_web.jpg
First time posting a picture on here, this is also my first build. Inspired by the Colt Model 605, but with improvements built in like a match barrel, and A2 sights. I think this would best decried as an A1 dissipator. The buttstock and handguard are both surplus A1. White Oak Armament 16" stainless steel barrel, wylde chamber, 1/8 twist, mid length gas system and a three prong flash hider. Rock River Arms lower, A2 upper, bolt carrier group, and 2 stage match trigger. C-More CSCT I had help from a friend who does quite a bit of builds, so it came out really well, with a very smooth action. I have only had a chance to break it in, indoors at 25 yards, so true accuracy and performance are yet to be determined. |
|
|
|
Posted: 4/11/2010 12:36:22 AM EDT
[#42]
|
|
|
|
CA, USA
|
Posted: 4/11/2010 2:45:05 AM EDT
[#43]
Originally Posted By hendricks433:
http://i1009.photobucket.com/albums/af217/hendricks433/First%20AR-15%20Build/IMG_0331.jpg http://i1009.photobucket.com/albums/af217/hendricks433/First%20AR-15%20Build/IMG_0311-1.jpg http://i1009.photobucket.com/albums/af217/hendricks433/First%20AR-15%20Build/IMG_0323.jpg where did you get that furniture? 
|
|
|
|
Posted: 4/11/2010 8:46:29 AM EDT
[#44]
|
|
|
|
|
Posted: 4/11/2010 12:49:24 PM EDT
[Last Edit: biomechaniod]
[#45]
Noveske 18" barrel
Mega forged upper Sun Devil billet lower w/ RR two-stage trigger A1 stock 12" LaRue handguards and SPR optic mount Trijicon Accupoint 3-9x40 Harris bipod Vortex FH (Shooting this makes me happy) 
|
|
|
|
|
Posted: 4/11/2010 1:21:44 PM EDT
[#46]
Originally Posted By spoons21369:
Originally Posted By hendricks433:
http://i1009.photobucket.com/albums/af217/hendricks433/First%20AR-15%20Build/IMG_0331.jpg http://i1009.photobucket.com/albums/af217/hendricks433/First%20AR-15%20Build/IMG_0311-1.jpg http://i1009.photobucket.com/albums/af217/hendricks433/First%20AR-15%20Build/IMG_0323.jpg where did you get that furniture? I got cheap Magpul stuff for the green sale that was going on and had them coated by a company in SC called Streamline Customs. They were great to work with and had it all back within a week. It can get pricey though. |
|
|
|
|
Posted: 4/12/2010 1:24:35 AM EDT
[#47]
|
|
|
|
TX, USA
|
Posted: 4/13/2010 9:28:07 PM EDT
[#48]
just finished my AR this past weekend
14.5" BCM upper with Pinned Flash Hinder to make it 16" legal and a Vltor CASV-EL handguard, Burris FastFire II Micro Red dot, and Troy rear BUIS. Gear Sector Surefire G2 offset mount with Surefire G2 led Flashlight DSA Lower with Milspec Buffertube & Carbine Buffer with Magpul Milspec CTR stock, MIAD Grip, Moe Trigger Guard, B.A.D Lever, A.S.A.P. Plate, Rock River Ambi Safety, KNS Gen 2. Non-Rotating Pins and Magpul PMags and MS2 Sling. http://i37.photobucket.com/albums/e90/Julio_C_H/My%20AR/100_0198.jpg http://i37.photobucket.com/albums/e90/Julio_C_H/My%20AR/100_0200.jpg |
|
|
WA, USA
|
Posted: 4/14/2010 12:34:36 AM EDT
[Last Edit: pwizl]
[#49]
Just finished, first and probably not last..
http://i940.photobucket.com/albums/ad248/pwizl/new%20ar/P1050673.jpg http://i940.photobucket.com/albums/ad248/pwizl/new%20ar/P1050670.jpg updated http://i940.photobucket.com/albums/ad248/pwizl/new%20ar/P1050924.jpg http://i940.photobucket.com/albums/ad248/pwizl/new%20ar/P1050915.jpg http://i940.photobucket.com/albums/ad248/pwizl/new%20ar/P1050919.jpg http://i940.photobucket.com/albums/ad248/pwizl/new%20ar/P1050922.jpg |
|
|
TX, USA
|
Posted: 4/14/2010 1:17:47 AM EDT
[Last Edit: Andrew9869]
[#50]
Originally Posted By J_Hernandez:
just finished my AR this past weekend 14.5" BCM upper with Pinned Flash Hinder to make it 16" legal and a Vltor CASV-EL handguard, Burris FastFire II Micro Red dot, and Troy rear BUIS. Gear Sector Surefire G2 offset mount with Surefire G2 led Flashlight DSA Lower with Milspec Buffertube & Carbine Buffer with Magpul Milspec CTR stock, MIAD Grip, Moe Trigger Guard, B.A.D Lever, A.S.A.P. Plate, Rock River Ambi Safety, KNS Gen 2. Non-Rotating Pins and Magpul PMags and MS2 Sling. http://i37.photobucket.com/albums/e90/Julio_C_H/My%20AR/100_0198.jpg http://i37.photobucket.com/albums/e90/Julio_C_H/My%20AR/100_0200.jpg I'd love to see more pictures of this gun with the mag in it. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
