User Panel
Posted: 1/25/2017 8:36:07 AM EDT
I'm thinking about making a .22 upper and was looking at the CMMG barrel/bolt/collar kit they sell. Any reason not to go with CMMG? Thought I'd check here first.
|
|
[#1]
i have the cmmg conversion bolt (chrome? one, its more expensive than the black one). i used it in my 1:9 piston carbine with good results for a while but we know how ars multiply lol. i bought the collar and used the bolt for a dedicated 4.5" pistol that i shoot mostly suppressed. its a blast
|
|
[#2]
Quoted:
i have the cmmg conversion bolt (chrome? one, its more expensive than the black one). i used it in my 1:9 piston carbine with good results for a while but we know how ars multiply lol. i bought the collar and used the bolt for a dedicated 4.5" pistol that i shoot mostly suppressed. its a blast View Quote Thanks. I'm looking at the 4.5 and shooting it suppressed |
|
[#3]
|
|
[#4]
It looks like CMMG offers 6 different .22lr uppers including a 9", but why don't they offer a 4.5" complete upper? They sell the 4.5" barrel and that seems like the way to go to capitalize on the cheap bulk pack ammo, but it's not available in a complete upper.
|
|
[#5]
Quoted:
It looks like CMMG offers 6 different .22lr uppers including a 9", but why don't they offer a 4.5" complete upper? They sell the 4.5" barrel and that seems like the way to go to capitalize on the cheap bulk pack ammo, but it's not available in a complete upper. View Quote Probably because they would need a ~3" rail to go with it. Most users would ditch that rail and go with a 7" to run a can under. If they shipped them out with 7" rails like us custom builders use, some amateur would use it without a can or extended flash hider and get molten lead on their hands. All in all, small market for it and liability for noobs. It's not too hard to build one. Especially since you don't need to mess with a gas tube or gas block. |
|
[#7]
|
|
[#8]
Quoted:
Is it best to get a stripped lower without a FA? View Quote I have non-FA uppers for all of my .22 and 9mm uppers. Aero makes them. These are on-sale: http://www.schuylerarmsco.com/product.ar15-assembled-upper-receiver-no-forward-assist-anodized-black-8-993 |
|
[#9]
Do get their 22 charging handle. It is more filled in than a 556 handle, that helps keep any stray spent brass from getting lodged in there.
|
|
[#10]
Quoted:
Do get their 22 charging handle. It is more filled in than a 556 handle, that helps keep any stray spent brass from getting lodged in there. View Quote Wrapped up my latest project (threaded .22 pistol with burris fast fire) and it's time to get serious on this one. Already had: SWR Spectre SBR lower Stripped Upper - I may switch this to a non-FA one at some point but I'm just going to use what I already have stashed away Really short pistol length FF hand guard (don't remember the details, I bought it cheap off the used EE >1 year ago specifically for a .22 AR) On the way: CMMG CH Better Mag adapter SW 15-22 mag Dust Cover Assembly FWD Assist Assembly Need to get: CMMG 4.5 inch barrel/collar/bolt kit If y'all think of something else essential let me know. It may be awhile until I finish this one because I'm trying to sell stuff to buy stuff instead of spending "new money". |
|
[#11]
As luck would have it, today I ordered...
CMMG 4.5" 22LR Barrel & SS Bolt Assy. Aero Precision No F/A, Assembled Upper Aero Precision 7" Quantum M-Lok Handguard I already have a couple of AR SBR'd lowers, SilencerCo Sparrow, spare Holosun 503 sight. So hopefully I'll have it all together in a couple of weeks. I'll let you know how mine goes, you let us know how yours goes. Have a good weekend, Bob S. |
|
[#12]
Quoted:
As luck would have it, today I ordered... CMMG 4.5" 22LR Barrel & SS Bolt Assy. Aero Precision No F/A, Assembled Upper Aero Precision 7" Quantum M-Lok Handguard I already have a couple of AR SBR'd lowers, SilencerCo Sparrow, spare Holosun 503 sight. So hopefully I'll have it all together in a couple of weeks. I'll let you know how mine goes, you let us know how yours goes. Have a good weekend, Bob S. View Quote Got the 4.5 bbl/collar/bolt kit on order from optics planet. It will be 2-3 weeks before it ships. |
|
[#13]
|
|
[#15]
Good looking build RipGear!
I'm not planning on going with the M&P 15 mags at this time. I know a lot of folks like them, but I don't want to worry about the adapter when I jump between my 5.56 upper & the 22LR one. I've already picked up a couple of CMMG mags on sale, and will give the Black Dog ones a try also. (really want to try their 50 round drum!) Looking forward to the new range toy - I'll post pics as soon as it's ready. Bob S. |
|
[#16]
Well - Optics Planet says it's in and has been shipped...
Description Ordered Shipped CMMG, Inc Barrel and Bolt Group Kit, 4.5in. MT 4140CM, 22LR 22D5B6E 1 1 The Aero Precision upper & handguard arrived yesterday - so all I can say now is... Come on FedEx! Bob S. |
|
[#17]
Quoted:
Well - Optics Planet says it's in and has been shipped... Description Ordered Shipped CMMG, Inc Barrel and Bolt Group Kit, 4.5in. MT 4140CM, 22LR 22D5B6E 1 1 The Aero Precision upper & handguard arrived yesterday - so all I can say now is... Come on FedEx! Bob S. View Quote Great, mine shouldn't be too far behind |
|
[#18]
You might consider the Taccom reliabilty kit. At least get the Taccom pressure plug that slides in front of the buffer to put more pressure on the bolt carrier.
|
|
[#19]
Quoted:
You might consider the Taccom reliabilty kit. At least get the Taccom pressure plug that slides in front of the buffer to put more pressure on the bolt carrier. View Quote I'm going to see how the parts I'm already getting work first. If I have to fix problems, I'll deal with them - but for now, I'm just going to set it all up and see how she runs. I put the 7" handguard on the upper without the barrel to see how the gun will look - and it will be a tiny little package! I'm already running the LWRC UCIW stock, and my Sparrow should only stick out a inch or less from the handguard. I can't wait to give it a run. FedEx says Tuesday delivery of the barrel/bolt set. I might make it to the range Wed. after work, if not Thurs. for sure! I'll post pics as soon as I have it setup. Bob S. |
|
[#20]
Quoted:
I'm going to see how the parts I'm already getting work first. If I have to fix problems, I'll deal with them - but for now, I'm just going to set it all up and see how she runs. I put the 7" handguard on the upper without the barrel to see how the gun will look - and it will be a tiny little package! I'm already running the LWRC UCIW stock, and my Sparrow should only stick out a inch or less from the handguard. I can't wait to give it a run. FedEx says Tuesday delivery of the barrel/bolt set. I might make it to the range Wed. after work, if not Thurs. for sure! I'll post pics as soon as I have it setup. Bob S. View Quote I just went and measured the small hand guard I'm going to use and it's just under 6 inches, probably ~5 extending beyond the upper receiver. IIRC a 4.5 inch barrel will have ~3.5 inchs extending out from the upper. My suppressor is 6 inches so, in theory, I'll have ~4 inches of suppressor out the front of the hand guard. Can these real short ones be shot without a suppressor? Just make sure your hand is behind the muzzle? |
|
[#21]
I've seen it done - just keep your hand behind the muzzle. I'd probably use a magwell hold to be sure.
You will get some crud build up on the handguard (both inside & out) if you do it a lot. I was thinking about picking up one of these if I wanted to run it without suppressor... Extra Long Flash Hider FedEx said my barrel/bolt is out for delivery.... I might have it all together tonight! Bob S. |
|
[#22]
Quoted:
I've seen it done - just keep your hand behind the muzzle. I'd probably use a magwell hold to be sure. You will get some crud build up on the handguard (both inside & out) if you do it a lot. I was thinking about picking up one of these if I wanted to run it without suppressor... Extra Long Flash Hider FedEx said my barrel/bolt is out for delivery.... I might have it all together tonight! Bob S. View Quote We [I] want pictures |
|
[#24]
Quoted:
OK - here you go, hot off the press, er... vice... Here it is in it's everyday setup. 10.5" LMT 5.56 upper, Aimpoint C3, Gemtech TREK, LWRC UCIW stock, Magpul K2+ grip, Geissele SD3G trigger... http://people.virginia.edu/~rjs7m/Guns/SBR-556-1.JPG And here it is with the new upper - Aero Precision No Forward Assist Upper, Aero Precision 7" MLOK Handguard, CMMG 4.5" 22LR barrel/Bolt set, SilencerCo Sparrow, Holosun 503 Circle-Dot sight. http://people.virginia.edu/~rjs7m/Guns/SBR-22LR-1.JPG http://people.virginia.edu/~rjs7m/Guns/SBR-22LR-2.JPG Went out in the backyard with 10 rounds of SV ammo - worked perfectly - will sight it in on Thursday. Bob S. View Quote Looks nice. Thanks Bob. |
|
[#25]
Man, that's a nice looking setup. I'm pretty sure my Spectre tailcap would be stuck to the barrel half the time though. Is it just the 8 allen head bolts to remove the Aero handguard?
|
|
[#26]
Quoted:
Man, that's a nice looking setup. I'm pretty sure my Spectre tailcap would be stuck to the barrel half the time though. Is it just the 8 allen head bolts to remove the Aero handguard? View Quote Yup - just the 8 Torx heads (not allen) - and it was a relatively easy install. The barrel nut they sent since I didn't have a "Enhanced" upper, uses shims to time it - took about 4 tries to get it just right. Once it's timed, you never have to mess with it again. For the money, I think it's a good handguard. It's about the same diameter as the Troy Alpha, so not skinny. I can put my SilencerCo 45 Octane under it easily (looks good that way too - it sticks out 4" from the end of the handguard. I too have a Spectre II (in jail right now) and if I do use it, or my Octane, it will be simple to remove if I leave an end cap behind. Looking forward to sighting it in on Thursday. Take care, Bob S. |
|
[#27]
That's great info Bob, thanks. I've had the Spectre for a while and just picked up my Mask today. What can are you using in the picture? It looks like it barely sticks out of the end of the hand guard.
With 2 rimfire cans now I'm looking for another host and I'm torn between an upper like this for an AR pistol or buying a Ruger charger then cutting the barrel and putting it in a PMACA chassis with a brace. I think the money would be similar either way but this looks like more fun. |
|
[#28]
The suppressor is a SilencerCo Sparrow - it's about 5" long (about an inch shorter than the Spectre II), and it sticks out just under 3/4" from the end of the handguard.
The good thing about the Sparrow is since it is a monocore, you can't unscrew the end cap when you go to take the can off. The only downside is it does have a little FRP, but I can live with that. I'm going to try it out with 3 different suppressors this week, as I have the Sparrow, Spectre II (still in jail, but I can arrange a conjugal visit) and Octane 45 HD. I have a Magpul M-Lok Vertical Grip coming in on Thursday, and I THINK that should be it (except for more mags) - still trying to decide if I want to put BUIS on it, but I don't really see the need. Have fun, Bob S. |
|
[#29]
@messer
Can you measure the overall length with stock collapsed and with/without suppressor attached? |
|
[#30]
Quoted:
@messer Can you measure the overall length with stock collapsed and with/without suppressor attached? View Quote Can do - but not at work. I'll check it after work today and post some numbers. Just a FYI - the LWRC UCIW Stock is almost 2" shorter than a std. carbine stock. Happy Wednesday, Bob S. |
|
[#31]
I have a product that is a must for these 22 set ups. lightnin grip loader
I don't have anything to do with the company but this will load a 25 round mag in 10 seconds or less. Makes shooting alot more fun. |
|
[#32]
|
|
[#33]
|
|
[#34]
Just a quick follow-up after some range time last night after work.
I only had enough time to put about 100 rounds through it. I was using SV Aguila ammo (not the best - not the worst, but available and not too expensive these days), and had no problems or failures. I sighted in at 10 yards first - very good groups. I was able to put 5 shot into one ragged hole. I then went out to 25 yards (as long as our indoor range goes), and was able to to keep everything in about 1 inch. I did have a problem keeping the red dot on the bullseye - not the guns fault, old eyes are more to blame. Once I had it sighted in, I ran a few multiple target drills - it was easy to hit everything I aimed at. All in all, it's a lot of fun - I can't wait to get it out on the steel target range. Have a good weekend, Bob S. p.s. And Deadeye... yes a mag loader will be a good idea! |
|
[#36]
Quoted:
Got a shipping notice from CMMG View Quote Sounds good! I don't know about where you live, but here FedEx hands it over to the USPS for final delivery. Mine made it one day sooner than the original "Deliver by" date, so it might be faster. I will tell you that everybody wants to play with it on the range! Keep us posted, Bob S. |
|
[#37]
Got my kit in and assembled my upper. I still lack a forward assist plug but they finally came back in stock and I have one ordered. I shot around 100 rounds yesterday and everything worked pretty good. The only problem I had was the bolt locks back with 1 round left in the mag every time. I figure as things get broken in it may fix it. If not, locking back with only 1 round left isn't a huge thing.
I also got one of the Mcfaden mag loaders with 15-22 adapter and it works great. It feels a bit delicate but the function is as advertised. I've since added the dust cover assembly but here is the 4.5 barrel with a SWR (SiCO) Spectre 1. The hand guard wasn't completely bolted on yet in the picture because I was still getting it lined up right. Attached File |
|
[#38]
Good deal!
I had mine out yesterday playing with the Sparrow & the Octane 45 HD. The Sparrow sticks out 5/8" from the 7" handguard - The Octane sticks out about 4" and is much bigger in diameter. They both look good in different ways, and both sound good. It seemed to me the accuracy was better with the Sparrow, but I'll need to do more testing. (like that's a bad thing) The gun functions perfectly - using the CMMG mags, the bolt holds open on the last shot, but the bolt drops when you remove the mag (since the bolt is actually being caught by the mag follower) I let a few others play with it - several are now looking to build a short upper! Have fun, Bob S. |
|
[#39]
What is accuracy like at 50 yards? Has anyone done a bench rest check of the 4.5" barrel and measured groups with different ammo?
|
|
[#40]
I'd need to mount up a scope to do any real accuracy testing on mine.
I use a 2 MOA red dot, with CCI SV, I get around a 1" group at 25 yards (I've tried a few different brands of ammo, CCI SV is the best so far). I've only shot one target at 50 yards, and the group opened up to almost 4". I was not trying to see how small a group I could shoot - more interested to see if there was a major POA/POI shift (it was a little higher at 50). I'm also sure some of that is the Red Dot, it's just too imprecise. Since the barrel is as short or shorter than most pistol barrels, I'd expect accuracy to be similar to a pistol - it's just more stable shooting with a stock. I've been enjoying mine these past weeks - letting other try it out. It never fails to make people smile! The combination of small, no recoil, and no noise puts a instant smile on everyone's face. Hope this helps, Bob S. |
|
[#41]
My forward assist plug arrived but I've been too busy to install it. Took it out one additional time with some CCI SV and it has been flawless. The bolt hold open function now works 100% so I guess it took some breaking in. I sighted in at 25 yards and the rounds were touching on the paper with aguila ammo, but haven't tried it on a proper paper target at 100 yet (too easy to just be lazy and shoot the steel at 100). Federal ammo was probably the worst and the groups at 25 were horrible. As mentioned aguila was best but more expensive and doesn't operate the bolt every time. CCI SV ended up being the best all around for function and accuracy.
I tried to lock it in a bench vise but the mag was too long (gets me every time!). I need to get a shorter 15-22 mag that will let me lock the rifle down and see what it groups at. |
|
[#42]
I have a cmmg conversion kit that works flawlessly in a 11.5.
Do you guys think i should just buy the 4.5 brl/collar or should i get a whole bolt barrel combo. I already have the sbr and can covered. |
|
[#43]
I'd order the barrel/bolt/collar kit from optics planet and use a 10% off coupon. You could save a few bucks by trying to make your old bolt work but, for something like this, getting all the pieces together is probably better. Sell your conversion to recover a few bucks.
|
|
[#44]
Quoted:
I have a cmmg conversion kit that works flawlessly in a 11.5. Do you guys think i should just buy the 4.5 brl/collar or should i get a whole bolt barrel combo. I already have the sbr and can covered. View Quote If your current bolt is the newer Stainless Steel one, I'd say you could go either way. If your bolt is NOT the SS one, I'd say get a new set from CMMG. As noted, opticsplanet.com seems to be the best deal with their 10% (or sometimes more) discount. They run the 10% discount almost monthly, just keep checking. Have fun, Bob S. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.