Quoted:
thanks for the input. ran into a problem, can't get the roll pin at the bottom of the hammer strut to move. have a high "oops" actor. taking everything to a gunsmith moday. looks like the hammer strut will be easy to bend if you are not careful. thanks for the input. thanks again.
rp
The hammer strut roll pin is easy to push out. All you need is a pair of needle nose pliers. Open the pliers and put one half on the back of the pin and the other on the edge of the strut. Just squeeze the pliers together and push the pin out.
Do yourself a favor and buy the Sig Armorers DVD by Chris Orndorff. It shows you how to completely strip your Sig down to the last spring. It also gives you very easy step by step directions on how to replace the hammer or main spring. It is very easy to do.
You can get the DVD from Top Gun Supply
http://www.topgunsupply.com/sig-sauer-armorers-course-dvd_p-series.html
It is well worth the $22.00.
Shipping is one flat fee so pick up a parts kit and replace all of the springs. I highly recommend replacing the springs when you buy a used Sig or a P6. For $26.00, its worth the peace of mind.