User Panel
Posted: 8/5/2012 6:46:24 AM EDT
[Last Edit: FAB-Defense]
FAB - Defense is proud to present a variety of Buttstock solutions for AK 47 / 74, KRINKOV - AKS - 74U and VZ - 58.
In the picture: AK 47 accessorized with UAS AK Buttstock, AG - 47, VFR - AK, T-POD SL by FAB - Defense.
UAS Series: The UAS AK Tactical Folding Buttstock offers you a supreme tactical upgrade for yore AK 47 / 74, KRINKOV - AKS - 74U and VZ - 58. Also available in steel joint version. Advantages: - Tough and Robust Design Slim and Low Profile - Rubber Butt Plate for Reducing Recoil and Slipping - Tough and Robust Design - Push Button to Release Locking, when Open, Spring lock on Folded Position,Pull to Open and Lock from the Folded Position - May be Mounted to Fold Left or Right Side (please designate your preference during purchase) M4-AKPSB Series: The M4-AKPSB Shock Absorbing Buttstock converts your AK OEM stock to an M16/M4 collapsible and side folding stock with a Polymer Joint. Advantages: - Shock Absorbing Reduces Recoil - Non Slip Design Provides Superior Shoulder Positioning Enhancing Tactical Performance - Stock Manufactured to Fit Your AK 47 Stamped Receiver - After Market Sized 6061 Hard Anodized Aluminum Buffer Tube to Fit Any M4 Stock with a Sealed Compartment - Quick Stock Deployment Folds to the Right Side Ideal for Use in Confined Areas and Close-Quarter Engagements due to it's Minimum Size when Folded, it's Massive Strength and Ability to use Weapon as a Baton The Toughest Folding Stock Ever - Available in Black and Two Camouflage Colors: Olive Drab Green, and Desert Tan * Also available in the complete polymer version - SBTK - 47 M4AK Series: The M4 AK Buttstock converts your AK OEM stock to an M16/M4 collapsible and side folding stock. Advantages: - Non Slip Design Provides Superior Shoulder Positioning Enhancing Tactical Performance - Stock Manufactured to Fit Your AK 47 Stamped Receiver - Hardened Steel Mill Spec Original GALIL Folding Mechanism that Stands Extreme Abuse - After Market Sized 6061 Hard Anodized Aluminum Buffer Tube to Fit Any M4 Stock with a Sealed Compartment - Quick Stock Deployment Folds to the Right Side Ideal for Use in Confined Areas and Close-Quarter Engagements due to it's Minimum Size when Folded, it's Massive Strength and Ability to use Weapon as a Baton The Toughest Folding Stock Ever - Available in Black and Two Camouflage Colors: Olive Drab Green, and Desert Tan * Also available in the complete polymer version - RBTK-47 For more detailed information and related products please visit our website at FAB - Defense or contact our distributor - The MAKO Group . |
|
FAB - Defense
"Leading the way" www.fab-defense.com |
I think you need to be an Industry Partner to promote your own products here, not just a Team Member.
NM I'm an idiot! I see you are an industry partner. |
|
Luk 6:45 The good person out of the good treasure of his heart produces good, and the evil person out of his evil treasure produces evil, for out of the abundance of the heart his mouth speaks.
Proud Member of Ranstad's Militia |
The UAS stocks are too long. They need to be shorter and closer to the Warsaw length stocks.
|
|
|
any chance on getting something like the GL-Mag stock for the AK (7.62 and 5.45) ?
|
|
|
Originally Posted By dntama:
The UAS stocks are too long. They need to be shorter and closer to the Warsaw length stocks. A lot of folks, like myself, find Warsaw length stocks to be way too freaking short. I'm not running a tac vest and full body armor... I don't need a super-short stock. I must admit that the UAS seems like an interesting stock option when combined with the TWS Dogleg... |
|
|
We at FAB-Defense have developed several Buttstock options for the AK exactly for these reasons.
In the UAS Series: there are two options; the UAS AK P - The Tactical Folding Buttstock w/ Cheek Piece For AK 47/74 rifles (Polymer Joint), or the UAS AK - Tough folding stock for AK-47/74 rifles (Metal Joint). As can be seen in the following video: Other then the UAS Series we also offer several collapsible Buttstock options: RBT K: The RBT-K47 Reinforced Polymer AK47 Buffer Tube, converts your AK47/74 OEM stock to M16/M4 collapsible stock. SBT K: The SBT-K47 Recoil Reducing AK47 Buffer Tube, converts your AK 47 OEM stock to M16/M4 collapsible stock. *Both models are also available in the FK version with / without Cheek-piece: GLR-16: GLR-16 CP GL-SHOCK GL-SHOCK CP As was previously posted, we also offer folding collapsible Buttstock options with both Metal / Polymer joints: M4-AK M4-AKSB M4-AKP / M4-AKPSB |
|
FAB - Defense
"Leading the way" www.fab-defense.com |
I really like the UAS stock, I will own one soon.
The GL-Shock stock is a good piece of gear, very well made and works as advertised. |
|
Peace is that brief glorious moment in history when everybody stands around reloading.
Good judgement comes from experience, and a lot of that comes from bad judgement. |
Thanks for the feedback,
let me know how you find the UAS once you tried it out. |
|
FAB - Defense
"Leading the way" www.fab-defense.com |
I really like my UAS but it would be perfect if it was a little shorter.
|
|
|
|
Originally Posted By plouffedaddy: http://i96.photobucket.com/albums/l178/tiffani33/Guns/DSC01382.jpg I'm a fan of the RBT K47 for those of you out there trying to decide. It's lightweight and very solid. That's the one I originally ordered but was sent the SBT-K47 instead. Rather than go through the hassle of returning it, I kept it. Works very well and now resides on my .308 Vepr. |
|
Peace is that brief glorious moment in history when everybody stands around reloading.
Good judgement comes from experience, and a lot of that comes from bad judgement. |
I run the GL-Shock AND the SBT-K47 on my Saiga 12. There's still recoil, but it's more of a hard push than a hit to the shoulder. Very preferable to any of the other alternatives I've tried.
How does the SBT-K47 work on a scoped rig? Seems like keeping cheek weld from shot to shot might prove challenging, albeit the reduction in felt recoil might compensate... |
|
|
Originally Posted By erwos: How does the SBT-K47 work on a scoped rig? Seems like keeping cheek weld from shot to shot might prove challenging, albeit the reduction in felt recoil might compensate... The effects of the SBT while shooting are invisible to me, I don't even notice it. Business as usual. |
|
Peace is that brief glorious moment in history when everybody stands around reloading.
Good judgement comes from experience, and a lot of that comes from bad judgement. |
|
|
FAB - Defense
"Leading the way" www.fab-defense.com |
Kool... I'm new to these type of parts for AK's......in the market for a replacement
stock for my Maadi & I really like the design of these!...... But...aaahhhh...just wondering about the "folders"...which side do they "fold" towards???...... Only reason I'm inquiring is 'cause I'm considering a "LEFT-side" charging handle conversion... There are 2 models...one uses a LEFT-side handle & the other has a handle on BOTH SIDES!!!...... http://coloradoshootingsports.safewebshop.com/ak_lightning_bolt_.html Thanks...Looks like a GREAT product! - |
|
|
First of all it looks like a nice upgrade for your AK.
Our folding Buttstocks are available with both options, all you need to do is to specify if you would like it to fold to the right when you order it. The default option is a left folding stock. Anyway the stock can only get in the way of the Charging Handle if you chose to mount a Stock with a Cheek Piece, which you will need to open before cocking your rifle or lowering the Cheek Piece before folding your Stock... Kind Regards, Ariel FAB-Defense. |
|
FAB - Defense
"Leading the way" www.fab-defense.com |
Originally Posted By FAB-Defense:
The M4-AKPSB CP on a fully FAB-Defense accessorized AKS-74U (Krinkov) http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/621867_421277427917872_539896728_o.jpg Do you sell a stock that will fit a factory side-folder, like in this photo? Don't see it on your website. |
|
|
Yes we can (lol),
Actually, the Stock in the picture is a Custom Built Buttstock for the "Krinkov" which is not just yet in mass production. This particular Buttstock Setup is recommended since it combines the most features in one, including the Recoil Reduction System. It can also be made with all other Polymer Folding Stocks we provide as the UAS-AK and the M4-AKP. For more information regarding Custom Solutions we can provide you with please contact our Distributor in the USA - The MAKO Group. Kind Regards, Ariel, FAB-Defense. |
|
FAB - Defense
"Leading the way" www.fab-defense.com |
Or any other of our Distributors in a Country of your choice using our Dealer Locator .
|
|
FAB - Defense
"Leading the way" www.fab-defense.com |
I was doing a firearm transfer (gotta love picking up a new gun) at my favorite local dealer today and noticed they were selling the UAS-AKP stock for only $94. That is one helluva nice price and oh so tempting. Might have to go back and get one tomorrow. Best price I have seen anywhere.
|
|
Peace is that brief glorious moment in history when everybody stands around reloading.
Good judgement comes from experience, and a lot of that comes from bad judgement. |
It is a very good price, may be too good... just make sure it is the real deal and not one of the knock-offs out there.
we have got some fans in China... Enjoy your new gun and I'm sure you will find the UAS-AKP a performance enhancing accessory for your rifle. I can also recommend for your brand new AK a Rail System of your choice, you should check out our AK-47 High Grade Polymer Handguard/Rail-system. Or if you wish to walk the extra mile, you could go pro with our top product for the AK market, the VFR-AK. Best Regards, Ariel FAB-Defense |
|
FAB - Defense
"Leading the way" www.fab-defense.com |
Based on my very favorable experience with the SBT-K47 on my .308 Vepr, I ordered the SBT-K47FK tube and stock for my inbound Vepr-12. Should work great. Grabagun.com has it for $91 shipped.
|
|
Peace is that brief glorious moment in history when everybody stands around reloading.
Good judgement comes from experience, and a lot of that comes from bad judgement. |
No Milled receiver offerings?
|
|
|
Originally Posted By fstbckgt:
No Milled receiver offerings? +1000! Any plans FAB? |
|
|
Thanks for the feedback,
We do have an adapter for the Milled version, you just need to specify in your order. The models available for Milled AK at the moment are: M4AKP UAS-AKP M4AKPSB Best regards, Ariel FAB-Defense |
|
FAB - Defense
"Leading the way" www.fab-defense.com |
Originally Posted By FAB-Defense:
Thanks for the feedback, We do have an adapter for the Milled version, you just need to specify in your order. The models available for Milled AK at the moment are: M4AKP http://www.themakogroup.com/v/vspfiles/photos/M4AKP-2.jpg UAS-AKP http://www.themakogroup.com/v/vspfiles/photos/UAS-AKP-3T.jpg M4AKPSB http://www.themakogroup.com/v/vspfiles/photos/M4AKPSB-2T.jpg Best regards, Ariel FAB-Defense Are these only for SLR-95 types, or can you use both rear tangs with these stocks? |
|
|
The Buttstocks in the pictures are with the standard polymer AK adapter for the Stamped version,
These specific Buttstocks are available with a different adapter for the Milled version. I will upload some pics later on. Kind Regards, Ariel, FAB-Defense |
|
FAB - Defense
"Leading the way" www.fab-defense.com |
Where can we order these? I went to your website and I am unable to purchase anything. I appreciate the advertising, but there is a disconnect where these are available.
I followed the distributor link, which took me to the Mako Group, but there was no option for milled receivers. |
|
|
The milled receiver adapters are pretty new, so they are not yet in stock or listed on our site in the US.
Are you in the US or The Netherlands? If you are in the Netherlands, you may contact Profile Equipment, who distributes FAB products there.
|
|
Israeli Special Forces Training www.MakoDefense.com • Combat-Proven Weapons Accessories and Holsters www.themakogroup.com
|
Originally Posted By FAB-Defense:
The Buttstocks in the pictures are with the standard polymer AK adapter for the Stamped version, These specific Buttstocks are available with a different adapter for the Milled version. I will upload some pics later on. Kind Regards, Ariel, FAB-Defense ...So are the milled ones for two tang receivers or not? |
|
|
Holly Crap, your stock actually has "the shoulder thing, that goes up"!
|
|
Never argue with an idiot. They will drag you down to their level and beat you with experience.
Before you judge someone, walk a mile in their shoes... That way, when you do judge them, you will be a mile away, and they will have no shoes. |
LM what did you have to do to mount that stock to your Vepr? Also did the PG just bolt on or did you need an adapter?
Posted Via AR15.Com Mobile |
|
"It is better to remain silent and be thought a fool than to speak and remove all doubt."-Abraham Lincoln
"Do not medle in the affairs of Dragons for you are crunchy and good with ketchup." |
Originally Posted By AK47CBR: LM what did you have to do to mount that stock to your Vepr? Also did the PG just bolt on or did you need an adapter? Nothing, it just bolts right on. I fabbed a cover plate to hide the slant cut on the receiver (optional). I did have to shave the sides of the stock where it enters the receiver because of the thicker 1.6mm receiver, but that would be true of any rifle with a 1.6mm receiver, not just Veprs. Pistol grip bolts on like any other AK, nothing special going on there. |
|
Peace is that brief glorious moment in history when everybody stands around reloading.
Good judgement comes from experience, and a lot of that comes from bad judgement. |
Originally Posted By fstbckgt:
Originally Posted By FAB-Defense:
The Buttstocks in the pictures are with the standard polymer AK adapter for the Stamped version, These specific Buttstocks are available with a different adapter for the Milled version. I will upload some pics later on. Kind Regards, Ariel, FAB-Defense ...So are the milled ones for two tang receivers or not? Vague, right? First they made it sound like it was already available to purchase. Now it's still in pre-production without a clear answer whether you can use it on rifles with both tangs. |
|
|
Originally Posted By sdrake100:
Originally Posted By fstbckgt:
Originally Posted By FAB-Defense:
The Buttstocks in the pictures are with the standard polymer AK adapter for the Stamped version, These specific Buttstocks are available with a different adapter for the Milled version. I will upload some pics later on. Kind Regards, Ariel, FAB-Defense ...So are the milled ones for two tang receivers or not? Vague, right? First they made it sound like it was already available to purchase. Now it's still in pre-production without a clear answer whether you can use it on rifles with both tangs. Totally agree. I'm getting a little tired of companies that flaunt new products without a whole lot of specs and when people post questions you get politician answers; "yes, no, maybe......" I understand new product development quite well, but if its not ready for release don't mention it and keep it in R & D a little longer. I like some of your products FAB, but gotta move on very soon. |
|
|
Originally Posted By ArmyLifer: Originally Posted By sdrake100: Vague, right? First they made it sound like it was already available to purchase. Now it's still in pre-production without a clear answer whether you can use it on rifles with both tangs. Totally agree. I'm getting a little tired of companies that flaunt new products without a whole lot of specs and when people post questions you get politician answers; "yes, no, maybe......" I understand new product development quite well, but if its not ready for release don't mention it and keep it in R & D a little longer. I like some of your products FAB, but gotta move on very soon. The thread was about stocks designed for stamped receivers, which have been available for a while. Someone asked about milled receivers, and FAB mentioned that they have adapters for the milled receivers. No one was flaunting a new product that does not exist - just answering a specific question about milled receivers. They are obviously available overseas, but Mako has not yet imported them. I will let you know as soon as I know when they will be here, but right now there is no power at the NY office, and everyone is dealing with the aftermath of the storm, so it will be some time before I know anything. Power is projected to be out for up to a week from now. Fortunately, the Mako offices and warehouse are undamaged, just awaiting power.
|
|
Israeli Special Forces Training www.MakoDefense.com • Combat-Proven Weapons Accessories and Holsters www.themakogroup.com
|
Well stated, and of course our prayers still go out to our Brothers in New York.
|
|
|
Originally Posted By MakoDefense:
Originally Posted By ArmyLifer:
Originally Posted By sdrake100:
Vague, right? First they made it sound like it was already available to purchase. Now it's still in pre-production without a clear answer whether you can use it on rifles with both tangs. Totally agree. I'm getting a little tired of companies that flaunt new products without a whole lot of specs and when people post questions you get politician answers; "yes, no, maybe......" I understand new product development quite well, but if its not ready for release don't mention it and keep it in R & D a little longer. I like some of your products FAB, but gotta move on very soon. The thread was about stocks designed for stamped receivers, which have been available for a while. Someone asked about milled receivers, and FAB mentioned that they have adapters for the milled receivers. No one was flaunting a new product that does not exist - just answering a specific question about milled receivers. They are obviously available overseas, but Mako has not yet imported them. I will let you know as soon as I know when they will be here, but right now there is no power at the NY office, and everyone is dealing with the aftermath of the storm, so it will be some time before I know anything. Power is projected to be out for up to a week from now. Fortunately, the Mako offices and warehouse are undamaged, just awaiting power. Yeah, I'd like to find a Mako buffer tube (recoil absorbing or otherwise w/ a recoil aborbing M4 butt) for a milled Arsenal SLR 101 –– and not have to cut off any tangs. I'd be OK with leaving the lower tang sticking our, but don't want to have to cut if off if I ever wanted to put a wood or composite stock back on it. Thanks! |
|
|
Here is a first glimpse of our new and improved UAS Buttstock Series in action on a “Galil”.
New features: • Two Integrated Slots for Sling Attachment at the Rear. • Integrated Ambidextrous Quick Detach Swivel Rear Sling Connectors • Also available in the “s” version - 27.7 mm / 1.09” shorter. For more availabilities and other Buttstocks solutions, see to our website at; FAB-Defense Buttstocks |
|
FAB - Defense
"Leading the way" www.fab-defense.com |
Originally Posted By FAB-Defense:
Here is a first glimpse of our new and improved UAS Buttstock Series in action on a “Galil”. New features: • Two Integrated Slots for Sling Attachment at the Rear. • Integrated Ambidextrous Quick Detach Swivel Rear Sling Connectors • Also available in the “s” version - 27.7 mm / 1.09” shorter. http://sphotos-d.ak.fbcdn.net/hphotos-ak-ash4/460774_463751817003766_682435491_o.jpg For more availabilities and other Buttstocks solutions, see to our website at; FAB-Defense Buttstocks Well let us know when you have buffer tubes and recoil absorbers for milled AKs. I see you have them for the VZ58, which is a relatively rare rifle here, so ones for the milled AK should be a slam dunk for you guys. |
|
|
Originally Posted By MeatAxe556:
Originally Posted By FAB-Defense:
Here is a first glimpse of our new and improved UAS Buttstock Series in action on a “Galil”. New features: • Two Integrated Slots for Sling Attachment at the Rear. • Integrated Ambidextrous Quick Detach Swivel Rear Sling Connectors • Also available in the “s” version - 27.7 mm / 1.09” shorter. http://sphotos-d.ak.fbcdn.net/hphotos-ak-ash4/460774_463751817003766_682435491_o.jpg For more availabilities and other Buttstocks solutions, see to our website at; FAB-Defense Buttstocks Well let us know when you have buffer tubes and recoil absorbers for milled AKs. I see you have them for the VZ58, which is a relatively rare rifle here, so ones for the milled AK should be a slam dunk for you guys. |
|
|
Come and visit us at Shot Show 2013
With The MAKO Group, Front - Line and Meprolight at booth 20138 |
|
FAB - Defense
"Leading the way" www.fab-defense.com |
That is beautiful.
|
|
|
Thanks
|
|
FAB - Defense
"Leading the way" www.fab-defense.com |
FAB - Defense
"Leading the way" www.fab-defense.com |
Originally Posted By alphagunner: I really like my UAS but it would be perfect if it was a little shorter. If ya have the fixed Buffer Tube… I wonder if ya could just shorten it a few notches…? If it's not the Recoil-Compensating tube.......I dunno.......just a thought......... - |
|
|
Man....I really wish you had a model in the UAS Series:
for a straight-cut receiver that was adjustable ONLY and not a folder...just my luck....dammit........ I like the design of the cheek-riser on that model....but not looking for a folder tho.......stupid Michigan laws....no SBR's for us...... Is there any advantage in choosing the rail mounted cheek-riser over direct-bolt model on the GLR-16 buttstock? It looks like it might be able to have fore-and-aft adjustments as well as veritcle adjustments....kinda kool.... How well do these cheek-risers hold up???....just wondering 'cause I just keep thinking it looks like a add-on.....almost like an "after thought" that got missed in the original design phase....I dunno..... I had planning on using a Enidine Shot Shock Hydraulic Recoil Reducing Stock Tube - For Mil-Spec Collapsible Stocks on a Rifle Dynamics AK to M-4 Stock Adapter... ...so I really just need to find a ass-kickin' stock and I can keep moving with this project........ I wish I could find a GLR-16 mounted to try out!.....of course I could catch a quick flight out to Vegas for the Shot Show....this afternoon....I'll need to check my schedule first...... Are these stocks really "Standard issue stock for Israeli Defense Forces."....? I guess that says a LOT about the GLR-16 buttstock! hhhmmmmmm..............I'm liking these more and more... - |
|
|
Originally Posted By rockher_man: There is a shorter version we will have soon, and you can shorten the standard one with a couple of hole saws, but the new short ones are really nice.Originally Posted By alphagunner: I really like my UAS but it would be perfect if it was a little shorter. If ya have the fixed Buffer Tube… I wonder if ya could just shorten it a few notches…? If it's not the Recoil-Compensating tube.......I dunno.......just a thought......... - |
|
Israeli Special Forces Training www.MakoDefense.com • Combat-Proven Weapons Accessories and Holsters www.themakogroup.com
|
Originally Posted By rockher_man: Is there any advantage in choosing the rail mounted cheek-riser over direct-bolt model on the GLR-16 buttstock? Are these stocks really "Standard issue stock for Israeli Defense Forces."....? I guess that says a LOT about the GLR-16 buttstock! The railed one and the standard one mount the same - the one just has rails in front, mainly for attaching shell carriers to shotguns. |
|
Israeli Special Forces Training www.MakoDefense.com • Combat-Proven Weapons Accessories and Holsters www.themakogroup.com
|
Originally Posted By FAB-Defense:
Thanks for the feedback, We do have an adapter for the Milled version, you just need to specify in your order. The models available for Milled AK at the moment are: M4AKP http://www.themakogroup.com/v/vspfiles/photos/M4AKP-2.jpg UAS-AKP http://www.themakogroup.com/v/vspfiles/photos/UAS-AKP-3T.jpg M4AKPSB http://www.themakogroup.com/v/vspfiles/photos/M4AKPSB-2T.jpg Best regards, Ariel FAB-Defense Hello are these adapters mentioned here available for order? I'd like to get a set for my Milled arsenal |
|
------------------
ΜΟΛΩΝ ΛΑΒΕ ------------------ |
yea....any update on the Milled "adapters"? Im looking at getting a GL shock stock on my SLR-95
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.