User Panel
Price check
Is $170 a good price for 1700 w/foam or 1720 w/foam? |
|
"Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." - Plato
|
Excellent source for cases and replacement foam at www.foamerica.com
|
|
|
Originally Posted By Freedom_Or_DEATH:
Looks like you remembered everything but the foam... View Quote View All Quotes View All Quotes Originally Posted By Freedom_Or_DEATH:
Originally Posted By AmericanCheese:
<a href="http://s612.photobucket.com/user/americancheese1/media/IMG_4937_zpssl2zx1ej.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt202/americancheese1/IMG_4937_zpssl2zx1ej.jpg</a> Looks like you remembered everything but the foam... Interesting..........the title of this thread is "lets see some pelican cases". Troll much? |
|
|
--------------------
Chris "Who needs 24 inch rims when you have a Zombie Apocalypse brush guard that can run through a WalMart?" -Upchurch The Redneck |
Originally Posted By AmericanCheese:
Interesting..........the title of this thread is "lets see some pelican cases". Troll much? View Quote View All Quotes View All Quotes Originally Posted By AmericanCheese:
Originally Posted By Freedom_Or_DEATH:
Originally Posted By AmericanCheese:
<a href="http://s612.photobucket.com/user/americancheese1/media/IMG_4937_zpssl2zx1ej.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt202/americancheese1/IMG_4937_zpssl2zx1ej.jpg</a> Looks like you remembered everything but the foam... Interesting..........the title of this thread is "lets see some pelican cases". Troll much? Me trolling? Or did you say that out loud in front of the mirror? My point is that a Pelican is a Rolls Royce gun case to PROTECT your valuables. Tossing all your valuables into a Pelican with zero foam is a complete waste of time and defeats all purpose of using a pelican. Was I clear enough or trolling? |
|
|
Originally Posted By AmericanCheese:
<a href="http://s612.photobucket.com/user/americancheese1/media/IMG_4937_zpssl2zx1ej.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt202/americancheese1/IMG_4937_zpssl2zx1ej.jpg</a> View Quote Is that yours and are those Pmags in that case? |
|
|
Just received my first Pelican (1700), which lock are you guys using for travel?
|
|
"Good people do not need laws to tell them to act responsibly, while bad people will find a way around the laws." - Plato
|
|
Originally Posted By Freedom_Or_DEATH:
Me trolling? Or did you say that out loud in front of the mirror? My point is that a Pelican is a Rolls Royce gun case to PROTECT your valuables. Tossing all your valuables into a Pelican with zero foam is a complete waste of time and defeats all purpose of using a pelican. Was I clear enough or trolling? View Quote View All Quotes View All Quotes Originally Posted By Freedom_Or_DEATH:
Originally Posted By AmericanCheese:
Originally Posted By Freedom_Or_DEATH:
Originally Posted By AmericanCheese:
<a href="http://s612.photobucket.com/user/americancheese1/media/IMG_4937_zpssl2zx1ej.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt202/americancheese1/IMG_4937_zpssl2zx1ej.jpg</a> Looks like you remembered everything but the foam... Interesting..........the title of this thread is "lets see some pelican cases". Troll much? Me trolling? Or did you say that out loud in front of the mirror? My point is that a Pelican is a Rolls Royce gun case to PROTECT your valuables. Tossing all your valuables into a Pelican with zero foam is a complete waste of time and defeats all purpose of using a pelican. Was I clear enough or trolling? No, I said it to you.....I was unaware you were the self anointed authority on how to store and transit rifles and gear inside P cases. Guns are tools....and there is one foam insert in my case.....look closer. |
|
|
Originally Posted By QtrHorse:
Is that yours and are those Pmags in that case? View Quote View All Quotes View All Quotes Originally Posted By QtrHorse:
Originally Posted By AmericanCheese:
<a href="http://s612.photobucket.com/user/americancheese1/media/IMG_4937_zpssl2zx1ej.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt202/americancheese1/IMG_4937_zpssl2zx1ej.jpg</a> Is that yours and are those Pmags in that case? Yes and yes.....my rolls royce case with only one foam insert |
|
|
Screw It!!!...MACHINE GUNS & OPEN-CARRY FOR ALL!!!
FL, USA
|
Originally Posted By AmericanCheese:
Yes and yes.....my rolls royce case with only one foam insert View Quote View All Quotes View All Quotes Originally Posted By AmericanCheese:
Originally Posted By QtrHorse:
Originally Posted By AmericanCheese:
<a href="http://s612.photobucket.com/user/americancheese1/media/IMG_4937_zpssl2zx1ej.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt202/americancheese1/IMG_4937_zpssl2zx1ej.jpg</a> Is that yours and are those Pmags in that case? Yes and yes.....my rolls royce case with only one foam insert hahaha...I once bought a Pelican case & a gift card as a x-mas present for my brother-in-law. We left the top foam in & used packing peanuts instead of foam for the main compartment and tossed the gift card underneath it all. Took him a while to find the gift card... |
,——' !‚–’¯¯ƒ One is just never enough... |
Originally Posted By Ashick: My first Pelican (1750). I just cut out the foam. I guess I could not cut straight, but it still looks good. http://img.photobucket.com/albums/v240/808state/Mobile%20Uploads/20151216_213921.jpg View Quote Looks good man |
|
|
Originally Posted By AmericanCheese:
No, I said it to you.....I was unaware you were the self anointed authority on how to store and transit rifles and gear inside P cases. Guns are tools....and there is one foam insert in my case.....look closer. View Quote View All Quotes View All Quotes Originally Posted By AmericanCheese:
Originally Posted By Freedom_Or_DEATH:
Originally Posted By AmericanCheese:
Originally Posted By Freedom_Or_DEATH:
Originally Posted By AmericanCheese:
<a href="http://s612.photobucket.com/user/americancheese1/media/IMG_4937_zpssl2zx1ej.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt202/americancheese1/IMG_4937_zpssl2zx1ej.jpg</a> Looks like you remembered everything but the foam... Interesting..........the title of this thread is "lets see some pelican cases". Troll much? Me trolling? Or did you say that out loud in front of the mirror? My point is that a Pelican is a Rolls Royce gun case to PROTECT your valuables. Tossing all your valuables into a Pelican with zero foam is a complete waste of time and defeats all purpose of using a pelican. Was I clear enough or trolling? No, I said it to you.....I was unaware you were the self anointed authority on how to store and transit rifles and gear inside P cases. Guns are tools....and there is one foam insert in my case.....look closer. It doesn't take any "authority" to see how much of a waste of time it is to put a bunch of loose marbles inside a hard case. What is the difference between dropping a box of loose stuff on the ground, versus just dropping the stuff on the ground. Spoiler alert, its "0". To each their own... The purpose of the case is to hold the foam, the purpose of the foam is to absorb shock, but what do I know, I aint no authoritaayyyy... |
|
|
Originally Posted By socommatthews: Here's my 1750, only paid $160 shipped new in the box off of Jet.com. Damn thing is 45lbs and I still need to load the mags lol On another note, what type of foam would be a good replacement? I have a different case that needs foam but looking on Foam Factory some of them are as much as a new Pelican case. View Quote Order from a known source Jet.com had some foam. Will it fit? https://jet.com/product/Pelican-3-Piece-Replacement-Foam-Set-for-1750-Cases/113b111f1d8c424d9faef4d5bec2e517 |
|
|
Originally Posted By EnlistedDate:
I would go high density closed cell as replacement Order from a known source Jet.com had some foam. Will it fit? https://jet.com/product/Pelican-3-Piece-Replacement-Foam-Set-for-1750-Cases/113b111f1d8c424d9faef4d5bec2e517 View Quote View All Quotes View All Quotes Originally Posted By EnlistedDate:
Originally Posted By socommatthews:
Here's my 1750, only paid $160 shipped new in the box off of Jet.com. Damn thing is 45lbs and I still need to load the mags lol On another note, what type of foam would be a good replacement? I have a different case that needs foam but looking on Foam Factory some of them are as much as a new Pelican case. Order from a known source Jet.com had some foam. Will it fit? https://jet.com/product/Pelican-3-Piece-Replacement-Foam-Set-for-1750-Cases/113b111f1d8c424d9faef4d5bec2e517 Would fit my Pelican but the case I need new foam for is a bit smaller. I'll look at the closed cell stuff though, thanks. |
|
|
|
|
Is there any real reason for worry when laying out a case with the scope on the bottom (scope facing the hinge) if the case is stored standing up?
Not sure if I should be worried about the weight of the rifle resting on this relatively expensive scope... |
|
|
Originally Posted By Will_Power:
Is there any real reason for worry when laying out a case with the scope on the bottom (scope facing the hinge) if the case is stored standing up? Not sure if I should be worried about the weight of the rifle resting on this relatively expensive scope... View Quote No - the rest of the foam will secure the rifle, and any decent scope/mount can handle the minimal pressure. -shooter |
|
|
Lots of fantastic advice and pictures. It seems to me most are 200 dollars for a case to hold an AR15/M4.
Warrantys are important. I see Pelican is lifetime, Storm is 1 year, and another not really mentioned is SKB, which I believe is lifetime also. The SKB and Storm cases have better latches, imho. I will need this case for traveling to and from range and airport Thoughts on SKB 3I-3614-6B-L. vs Storm im3100 case? |
|
|
|
Originally Posted By Freedom_Or_DEATH:
The purpose of the case is to hold the foam, the purpose of the foam is to absorb shock, but what do I know, I aint no authoritaayyyy... View Quote He indicated earlier that the top and bottom foam is enough to hold the rifle firmly in place. I don't know to what extent he tested it, but it appears that he hauls a bunch of expensive gear. I suspect if he was breaking EOTechs all the time, he would have changed it. That said - I am not sure I have the courage to test that with a decently nice rifle/optic. -shooter |
|
|
Originally Posted By shooter220:
He indicated earlier that the top and bottom foam is enough to hold the rifle firmly in place. I don't know to what extent he tested it, but it appears that he hauls a bunch of expensive gear. I suspect if he was breaking EOTechs all the time, he would have changed it. That said - I am not sure I have the courage to test that with a decently nice rifle/optic. -shooter View Quote View All Quotes View All Quotes Originally Posted By shooter220:
Originally Posted By Freedom_Or_DEATH:
The purpose of the case is to hold the foam, the purpose of the foam is to absorb shock, but what do I know, I aint no authoritaayyyy... He indicated earlier that the top and bottom foam is enough to hold the rifle firmly in place. I don't know to what extent he tested it, but it appears that he hauls a bunch of expensive gear. I suspect if he was breaking EOTechs all the time, he would have changed it. That said - I am not sure I have the courage to test that with a decently nice rifle/optic. -shooter You must be confusing him and someone else. He stated he only has "one foam insert", which if you look at the pic, is the top piece and would apply zero pressure to anything inside the case, so like I said, defeats the entire purpose... |
|
|
|
This is a great thread! Thanks to everyone for sharing their experiences and tips here.
I'm working on building my hot wire cutter now, so I can setup a few cases. I've got a couple of questions. 1). What are your thoughts on whether to place the gun in the case with accessories (lights, red dots, VFG's, etc.) installed, vs. putting the accessories in separate cut out pockets? For my AR10, I figured I would leave the scope on the rifle, but I'm not sure if I want to leave the bipod on, or put it in its own pocket. 2) I'm going to order extra foam to make alternate layouts for a couple cases. I see that the Foam Factory offers charcoal foam in both "standard" and "firm" versions. The "standard" version is a 1.3lbs foam (which is what Pelican uses), and the "firm" version is a 1.7lbs foam. I'm thinking that the 1.7lbs would hold up better, and t's not really that expensive either. 3) I'm interested in using that rubberized spray product. How many coats should I use? Do you spray all surfaces of the liner foam? Should I mask the part where the gun or accessory rests in? Thoughts? Thanks in advance |
|
The two enemies of the people are criminals and government, so let us tie the second down with the chains of the Constitution so the second will not become the legalized version of the first.
|
Originally Posted By m4hooah:
This is a great thread! Thanks to everyone for sharing their experiences and tips here. I'm working on building my hot wire cutter now, so I can setup a few cases. I've got a couple of questions. 1). What are your thoughts on whether to place the gun in the case with accessories (lights, red dots, VFG's, etc.) installed, vs. putting the accessories in separate cut out pockets? For my AR10, I figured I would leave the scope on the rifle, but I'm not sure if I want to leave the bipod on, or put it in its own pocket. 2) I'm going to order extra foam to make alternate layouts for a couple cases. I see that the Foam Factory offers charcoal foam in both "standard" and "firm" versions. The "standard" version is a 1.3lbs foam (which is what Pelican uses), and the "firm" version is a 1.7lbs foam. I'm thinking that the 1.7lbs would hold up better, and t's not really that expensive either. 3) I'm interested in using that rubberized spray product. How many coats should I use? Do you spray all surfaces of the liner foam? Should I mask the part where the gun or accessory rests in? Thoughts? Thanks in advance View Quote Anyone have any input on this? |
|
The two enemies of the people are criminals and government, so let us tie the second down with the chains of the Constitution so the second will not become the legalized version of the first.
|
|
|
|
|
Originally Posted By Marine_Air:
<a href="http://s1217.photobucket.com/user/marineair/media/IMG_5517_zpsggla84sy.jpg.html" target="_blank">http://i1217.photobucket.com/albums/dd391/marineair/IMG_5517_zpsggla84sy.jpg</a> View Quote What is the small pelican case on the bottom left? And what are the 3 big green ones? |
|
|
Originally Posted By ThatDude812:
What is the small pelican case on the bottom left? And what are the 3 big green ones? View Quote View All Quotes View All Quotes Originally Posted By ThatDude812:
Originally Posted By Marine_Air:
<a href="http://s1217.photobucket.com/user/marineair/media/IMG_5517_zpsggla84sy.jpg.html" target="_blank">http://i1217.photobucket.com/albums/dd391/marineair/IMG_5517_zpsggla84sy.jpg</a> What is the small pelican case on the bottom left? And what are the 3 big green ones? The smallest one is for an iPad mini, I use it for a Samsung KILSWITCH tablet that I use at work. 3 green ones are footlockers. New stencil work on one of them: |
|
|
--------------------
Chris "Who needs 24 inch rims when you have a Zombie Apocalypse brush guard that can run through a WalMart?" -Upchurch The Redneck |
Originally Posted By anthony20031:
Currently trying to figure out how to lay out my case. Think I will have the foam replaced on the top and have my magazines installed in the top. Then just have a thin layer of foam to keep the magazines off the guns. Plus it will open up a few spots around the guns to hold slings etc. And yes I know its not a pelican View Quote Just curious, why do you want to put a sling in your case? Or is this going to be your only rifle? |
|
|
just be nice to have. I have a sling for my carbine. Something I would use for a class etc.
|
|
|
Originally Posted By DustinS:
Just curious, why do you want to put a sling in your case? Or is this going to be your only rifle? View Quote View All Quotes View All Quotes Originally Posted By DustinS:
Originally Posted By anthony20031:
Currently trying to figure out how to lay out my case. Think I will have the foam replaced on the top and have my magazines installed in the top. Then just have a thin layer of foam to keep the magazines off the guns. Plus it will open up a few spots around the guns to hold slings etc. And yes I know its not a pelican Just curious, why do you want to put a sling in your case? Or is this going to be your only rifle? Because a long gun without a sling is like a handgun without a holster. |
|
--------------------
Chris "Who needs 24 inch rims when you have a Zombie Apocalypse brush guard that can run through a WalMart?" -Upchurch The Redneck |
|
|
Originally Posted By Steve40th396:
Lots of fantastic advice and pictures. It seems to me most are 200 dollars for a case to hold an AR15/M4. Warrantys are important. I see Pelican is lifetime, Storm is 1 year, and another not really mentioned is SKB, which I believe is lifetime also. The SKB and Storm cases have better latches, imho. I will need this case for traveling to and from range and airport Thoughts on SKB 3I-3614-6B-L. vs Storm im3100 case? View Quote |
|
|
Originally Posted By ProCharger:
This is incorrect, Storm cases carry the same warranty as Pelican.....guaranteed for life. View Quote View All Quotes View All Quotes Originally Posted By ProCharger:
Originally Posted By Steve40th396:
Lots of fantastic advice and pictures. It seems to me most are 200 dollars for a case to hold an AR15/M4. Warrantys are important. I see Pelican is lifetime, Storm is 1 year, and another not really mentioned is SKB, which I believe is lifetime also. The SKB and Storm cases have better latches, imho. I will need this case for traveling to and from range and airport Thoughts on SKB 3I-3614-6B-L. vs Storm im3100 case? What is the basic difference between the Storm case and a regular Pelican? Is one supposedly more durable than the other? |
|
|
Just how much Plasti-dip are you guys using on your foam. I have four very light coats and have put on one heavier coat. It is still not as firm as I want it to be. It looks good but I want it to actually feel almost solid. Is that possible? So far I have used on full can.
|
|
|
Screw It!!!...MACHINE GUNS & OPEN-CARRY FOR ALL!!!
FL, USA
|
Originally Posted By kristen:
Just how much Plasti-dip are you guys using on your foam. I have four very light coats and have put on one heavier coat. It is still not as firm as I want it to be. It looks good but I want it to actually feel almost solid. Is that possible? So far I have used on full can. View Quote I've never used it. Always just replaced the foam with a closed-cell design rather than the open-cell one it comes with. The closed-cell foam definitely feels "solid"... |
,——' !‚–’¯¯ƒ One is just never enough... |
|
Originally Posted By m4hooah:
This is a great thread! Thanks to everyone for sharing their experiences and tips here. I'm working on building my hot wire cutter now, so I can setup a few cases. I've got a couple of questions. 1). What are your thoughts on whether to place the gun in the case with accessories (lights, red dots, VFG's, etc.) installed, vs. putting the accessories in separate cut out pockets? For my AR10, I figured I would leave the scope on the rifle, but I'm not sure if I want to leave the bipod on, or put it in its own pocket. I'd just leave everything on. It doesn't hurt anything to be attached and actually takes up less room in the case. It also means you don't have to re attach accessories. 2) I'm going to order extra foam to make alternate layouts for a couple cases. I see that the Foam Factory offers charcoal foam in both "standard" and "firm" versions. The "standard" version is a 1.3lbs foam (which is what Pelican uses), and the "firm" version is a 1.7lbs foam. I'm thinking that the 1.7lbs would hold up better, and t's not really that expensive either. 3) I'm interested in using that rubberized spray product. How many coats should I use? Do you spray all surfaces of the liner foam? Should I mask the part where the gun or accessory rests in? Thoughts? Thanks in advance View Quote |
|
|
|
I know it's a picture thread but I haven't had any luck in the ruger forum. I'm looking for a Pelican case to hold my Ruger LCP with a lasermax and 1.5" grip extension (from adamsgrips.com) with about 3 more mags that have the same extension. Maybe even squeeze my kershaw burst in there. I'm looking for a smaller case that would fit everything snugly, and take up minimal room in my checked bag when traveling. I would greatly appreciate any help with this! I'll be flying with my CCW for the 1st time in a couple of weeks and want to find the right sized pelican asap. I figure pelican is the best so I want to do it right the 1st time. I'll of course post pictures once I find the right case and cut it to fit!
Thanks y'all. |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.