User Panel
Posted: 8/5/2005 8:10:29 PM EDT
[Last Edit: -JC-]
Please Post Pictures and Descriptions of your AR Pistols Here.
Any Questions or Comments should be made in other Threads, to keep the Purpose and Intent of this Thread purely on visual stimulation. Thanks again!! |
|
Please Note: ITS NOT FUNNY TO HACK MY PERSONAL WEBSITE.
|
Originally Posted By Cleaver:
Out of curiosity, what makes you think this M&P lower was once on a rifle? My local gun shop sells M&P15 stripped lowers for $149...are they different than other stripped lowers or am I missing something? Cleaver View Quote View All Quotes View All Quotes Originally Posted By Cleaver:
Originally Posted By kwhyte:
Originally Posted By MCStone1979:
Originally Posted By kielal:
Officially finished (not really finished but) my first build. Had some ejection issues with the carbine buffer, dropped the H2 buffer to correct that today. Wanted it as a SBR build, but have decided to keep it as a pistol and start another SBR build! Lined the Noveske on the KX3 to see through the rail. These things are a blast to shoot! Want to figure out a single point sling and some flip up sights and should be GTG. VTAC rail 9" KX3 Surplus Arms and Ammo 7.5" barrel M&P lower Aero Upper Phase 5 buffer tube PSA Magpul lower build kit KNS trigger pin set BCM mod 4 charging handle Windham Weaponry FA 158 BCG Troy gas block Noveske gas tube Primary Arms red dot http://www.tacomaworld.com/gallery/data/500/IMGP4929.JPG http://www.tacomaworld.com/gallery/data/500/IMGP4933.JPG http://www.tacomaworld.com/gallery/data/500/IMGP4944.JPG http://www.tacomaworld.com/gallery/data/500/medium/20130728_1437362.jpg That M&P lower wasn't originally sold as a rifle was it? Mike I'm betting the answer to the question is yes and that makes for a big no no. Out of curiosity, what makes you think this M&P lower was once on a rifle? My local gun shop sells M&P15 stripped lowers for $149...are they different than other stripped lowers or am I missing something? Cleaver No it was bought as a stripped lower and has never been a rifle. I get that question a lot from people who I guess think they know what they're talking about. |
|
|
Originally Posted By kielal:
No it was bought as a stripped lower and has never been a rifle. I get that question a lot from people who I guess think they know what they're talking about. View Quote The M&P was sold as a complete rifle long before you could buy M&P stripped lowers, and you don't see too many stripped lowers, so that's probably where it comes from. |
|
|
Originally Posted By kielal: No it was bought as a stripped lower and has never been a rifle. I get that question a lot from people who I guess think they know what they're talking about. View Quote View All Quotes View All Quotes Originally Posted By kielal: Originally Posted By Cleaver: Originally Posted By kwhyte: Originally Posted By MCStone1979: Originally Posted By kielal: Officially finished (not really finished but) my first build. Had some ejection issues with the carbine buffer, dropped the H2 buffer to correct that today. Wanted it as a SBR build, but have decided to keep it as a pistol and start another SBR build! Lined the Noveske on the KX3 to see through the rail. These things are a blast to shoot! Want to figure out a single point sling and some flip up sights and should be GTG. VTAC rail 9" KX3 Surplus Arms and Ammo 7.5" barrel M&P lower Aero Upper Phase 5 buffer tube PSA Magpul lower build kit KNS trigger pin set BCM mod 4 charging handle Windham Weaponry FA 158 BCG Troy gas block Noveske gas tube Primary Arms red dot http://www.tacomaworld.com/gallery/data/500/IMGP4929.JPG http://www.tacomaworld.com/gallery/data/500/IMGP4933.JPG http://www.tacomaworld.com/gallery/data/500/IMGP4944.JPG http://www.tacomaworld.com/gallery/data/500/medium/20130728_1437362.jpg That M&P lower wasn't originally sold as a rifle was it? Mike I'm betting the answer to the question is yes and that makes for a big no no. Out of curiosity, what makes you think this M&P lower was once on a rifle? My local gun shop sells M&P15 stripped lowers for $149...are they different than other stripped lowers or am I missing something? Cleaver No it was bought as a stripped lower and has never been a rifle. I get that question a lot from people who I guess think they know what they're talking about. They'd be wrong though! http://www.impactguns.com/smith-wesson-mp-15-stripped-lower-assembly-556mm-nato-812000-022188134193.aspx |
|
Funny how brave are the little chipmunks when posting from the security of their Mom's basement
|
Originally Posted By rksonex:
NICE!! any chance of getting a side view pic? View Quote View All Quotes View All Quotes Originally Posted By rksonex:
Originally Posted By SWExtreme:
7.5" 300 blackout http://i.imgur.com/zXCWC4Zl.jpg http://i.imgur.com/u54qR3El.jpg NICE!! any chance of getting a side view pic? Here's a side view Parts list: 7.5" 1:8 ADC Barrel 7" MI Gen 2 SS Handguard with Panel Kit Precision Arms MFG 80% Billet Lower P-TAC LPK with JP 3.5lb Trigger Springs PA Micro Dot MBUS Gen 2 Troy Claymore 7.62 MOE+ CAA Saddle GunTec Pistol Buffer Kit BCM Gunfighter MOD4 |
|
|
Originally Posted By yetti78:
That is super sweet. What rail? View Quote View All Quotes View All Quotes Originally Posted By yetti78:
Originally Posted By SWExtreme:
7.5" 300 blackout http://i.imgur.com/zXCWC4Zl.jpg http://i.imgur.com/u54qR3El.jpg That is super sweet. What rail? Thanks, it's a 7" Midwest Industries Gen 2 SS. I highly recommend this product due to it's light weight, low cost, and ergonomics. |
|
|
Originally Posted By SWExtreme:
Here's a side view http://i.imgur.com/ASRTdihl.jpg Parts list: 7.5" 1:8 ADC Barrel 7" MI Gen 2 SS Handguard with Panel Kit Precision Arms MFG 80% Billet Lower P-TAC LPK with JP 3.5lb Trigger Springs PA Micro Dot MBUS Gen 2 Troy Claymore 7.62 MOE+ CAA Saddle GunTec Pistol Buffer Kit BCM Gunfighter MOD4 View Quote View All Quotes View All Quotes Originally Posted By SWExtreme:
Originally Posted By rksonex:
Originally Posted By SWExtreme:
7.5" 300 blackout http://i.imgur.com/zXCWC4Zl.jpg http://i.imgur.com/u54qR3El.jpg NICE!! any chance of getting a side view pic? Here's a side view http://i.imgur.com/ASRTdihl.jpg Parts list: 7.5" 1:8 ADC Barrel 7" MI Gen 2 SS Handguard with Panel Kit Precision Arms MFG 80% Billet Lower P-TAC LPK with JP 3.5lb Trigger Springs PA Micro Dot MBUS Gen 2 Troy Claymore 7.62 MOE+ CAA Saddle GunTec Pistol Buffer Kit BCM Gunfighter MOD4 Thanks! |
|
|
Originally Posted By jrzy:
A lot of people didn't think S&W M&P lowers were available stripped I'm thinking? They'd be wrong though! http://www.impactguns.com/smith-wesson-mp-15-stripped-lower-assembly-556mm-nato-812000-022188134193.aspx View Quote I knew they were available stripped. But they are far less common that way. There are a TON of better/more cost effective alternatives out there. You just don't see them bought stripped very often. My first AR was an M&P15 and I love it. But when I was in the market for a lower for my current pistol build, I wasn't running out to grab an M&P lower. Mike |
|
|
|
Originally Posted By haw1144:
just finished this up from my 80% AAC 9" 300 Blackout Ergo Grip Spikes LPK / Buffer Troy Sights w/Dioptic Rear BCM Charging Handle Aimpoint T1 w/Seekins Mount https://googledrive.com/host/0BwzZsnL9EBiVdC1GRjItT28wWVE/ar2.png closeup of fire/safe https://googledrive.com/host/0BwzZsnL9EBiVdC1GRjItT28wWVE/ar.png View Quote that is bad ass |
|
WARNING MY GRAMMAR SUCK MY SPELLING SUCK
nukldragr: If my count were any higher the little fuckers would jump out of my nuts and rob banks |
couple more
https://scontent-a-iad.xx.fbcdn.net/hphotos-prn2/1235498_10101791328265824_982104078_n.jpg https://scontent-b-iad.xx.fbcdn.net/hphotos-prn2/1230046_10101791327312734_1951542715_n.jpg https://scontent-a-iad.xx.fbcdn.net/hphotos-ash3/1240234_10101791325750864_503754676_n.jpg adding a FDE upper/lower this weekend Existing build: WMA billet lower Wisconsin tactical bullet Upper RRA BCG & charging handle RRA pistol buffer system Gunenvy LPK Troy FDE fixed iron sights 12 inch rail KAK Flash hider Stainless 10.5 barrel veriforce low pro gas block veriforce gas tube Magpul grip Magpul AFG1 |
|
|
|
Originally Posted By trunty:
- Palmetto State Armory upper and lower - Ice Arms NiB M16 BCG - Ice Arms 7.5" melonite barrel - Seekins 9" BAR handguard - Noveske KX3 - Phase 5 Tactical Pistol/Rifle pigtail gas tube - Phase 5 buffer tube assembly - Palmetto State Armory MOE LPK - Daniels Defense iron sights - MOE AFG http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_5.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_6.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_4.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_3.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_2.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_1.jpg View Quote Looks good, but I recommend you move your rear sight all the way back. |
|
|
Originally Posted By Firefighter503:
Looks good, but I recommend you move your rear sight all the way back. View Quote View All Quotes View All Quotes Originally Posted By Firefighter503:
Originally Posted By trunty:
- Palmetto State Armory upper and lower - Ice Arms NiB M16 BCG - Ice Arms 7.5" melonite barrel - Seekins 9" BAR handguard - Noveske KX3 - Phase 5 Tactical Pistol/Rifle pigtail gas tube - Phase 5 buffer tube assembly - Palmetto State Armory MOE LPK - Daniels Defense iron sights - MOE AFG http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_5.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_6.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_4.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_3.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_2.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_1.jpg Looks good, but I recommend you move your rear sight all the way back. Ever shot anything with a really short stock? Giving up a couple inches of sight radius won't make that much of a difference. at pistol ranges. |
|
|
Originally Posted By RDTCU:
Ever shot anything with a really short stock? Giving up a couple inches of sight radius won't make that much of a difference. at pistol ranges. View Quote View All Quotes View All Quotes Originally Posted By RDTCU:
Originally Posted By Firefighter503:
Originally Posted By trunty:
- Palmetto State Armory upper and lower - Ice Arms NiB M16 BCG - Ice Arms 7.5" melonite barrel - Seekins 9" BAR handguard - Noveske KX3 - Phase 5 Tactical Pistol/Rifle pigtail gas tube - Phase 5 buffer tube assembly - Palmetto State Armory MOE LPK - Daniels Defense iron sights - MOE AFG http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_5.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_6.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_4.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_3.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_2.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_1.jpg Looks good, but I recommend you move your rear sight all the way back. Ever shot anything with a really short stock? Giving up a couple inches of sight radius won't make that much of a difference. at pistol ranges. A valid argument. I still prefer the longer sight radius. |
|
|
Originally Posted By trunty:
- Palmetto State Armory upper and lower - Ice Arms NiB M16 BCG - Ice Arms 7.5" melonite barrel - Seekins 9" BAR handguard - Noveske KX3 - Phase 5 Tactical Pistol/Rifle pigtail gas tube - Phase 5 buffer tube assembly - Palmetto State Armory MOE LPK - Daniels Defense iron sights - MOE AFG http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_5.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_6.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_4.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_3.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_2.jpg http://www.use.com/images/s_2/7e9d189bc5b8f5ea80d1_1.jpg View Quote What's the advantage of the pig tail gas tube? I though about getting one but since mine operates fine without it I didn't bother. |
|
|
Originally Posted By STF:
What's the advantage of the pig tail gas tube? I though about getting one but since mine operates fine without it I didn't bother. View Quote The theory is at it totals about the length of a carbine gas tube, causing a slight slowing of the action/cyclic rate. I have one on mine, and get by fine with a standard weight pistol buffer from Phase 5. Many use a heavier buffer to accomplish the same ends. Some use neither and still function well, others not so much. YMMV. |
|
T Bone (Detroit).
<font size=2>كافر </font id=s2> <font color=blue> <font size=2>"A fear of weapons is a sign of retarded sexual and emotional maturity"</font id=s2></font id=blue> Sigmund Freud |
Cause and effect......Cause is over....Brace for effect....I prep.....what you do to brace yourself.....is at your discretion. But for those who don't prep.....I prep for you....in a different way......Me
|
Updated pics of my "firearm" build:
20130913_135237 by Slick_Rick77, on Flickr 20130913_135114 by Slick_Rick77, on Flickr Fired it indoors for the first time yesterday. It was a lot more pleasant than I thought it would be. |
|
|
Originally Posted By Rick_A:
Updated pics of my "firearm" build: [email=http://www.flickr.com/photos/38468288@N03/9927024394/]http://farm4.staticflickr.com/3674/9927024394_6a03d47d24_o.jpg[/email] 20130913_135237 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/9927123703/]http://farm8.staticflickr.com/7313/9927123703_6a9e0e3ccc_o.jpg[/email] 20130913_135114 by Slick_Rick77, on Flickr Fired it indoors for the first time yesterday. It was a lot more pleasant than I thought it would be. View Quote IM sent |
|
Cockpocalypse 2012 survivor
Arfcom alias: Hammer |
|
Originally Posted By SWExtreme:
7.5" 300 blackout http://i.imgur.com/zXCWC4Zl.jpg http://i.imgur.com/u54qR3El.jpg View Quote What cheek weld is that? I really like that look... hides the otherwise strange looking tube. Posted Via AR15.Com Mobile |
|
|
Originally Posted By serbu50:
What cheek weld is that? I really like that look... hides the otherwise strange looking tube. Posted Via AR15.Com Mobile View Quote View All Quotes View All Quotes Originally Posted By serbu50:
Originally Posted By SWExtreme:
7.5" 300 blackout http://i.imgur.com/zXCWC4Zl.jpg http://i.imgur.com/u54qR3El.jpg What cheek weld is that? I really like that look... hides the otherwise strange looking tube. Posted Via AR15.Com Mobile are you talking about the CAA stock saddle? |
|
|
Whats the buffer tube and cover? looks nice
|
|
|
..............
|
|
|
...........
|
|
|
Originally Posted By Legion556:
Johnny Pistol Build engraved from an 80%er http://s1318.photobucket.com/user/tjohnsonsrf/media/JohnnyPistol1_zps7a69b68f.jpg.htmlhttp:// http://i1318.photobucket.com/albums/t647/tjohnsonsrf/JohnnsyPistol2_zps1fc0342d.jpghttp://http://i1318.photobucket.com/albums/t647/tjohnsonsrf/JohnnyPistol3_zps672b6493.jpg View Quote that is awesome well done |
|
WARNING MY GRAMMAR SUCK MY SPELLING SUCK
nukldragr: If my count were any higher the little fuckers would jump out of my nuts and rob banks |
Originally Posted By Firefighter503:
Nice. Rguns upper? I have one sitting at home (VA also), waiting on my return to be turned into a pistol. I went with a Phase 5 pistol tube and Magpul MBUS. It will also get T-1 probably. Eta: how does she shoot? View Quote View All Quotes View All Quotes Originally Posted By Firefighter503:
Originally Posted By Cleaver:
Been lurking for a long time...thought I'd join the fun. Here is my offering: http://i72.photobucket.com/albums/i198/montipratt/DSCN0833_zps22735c8f.jpg Nice. Rguns upper? I have one sitting at home (VA also), waiting on my return to be turned into a pistol. I went with a Phase 5 pistol tube and Magpul MBUS. It will also get T-1 probably. Eta: how does she shoot? It shoots great! I cleaned it first....then coated the bolt with FireClean (letting it "soak" overnight). Wiped off the excess and all was great. I put about 150 rounds through it without a hiccup. Accuracy was pretty good. Need to bring the sight up a little for better eye alignment. Take care and be safe in AFG. Cleaver |
|
|
Originally Posted By Legion556:
http://i1318.photobucket.com/albums/t647/tjohnsonsrf/JohnnyPistol1_zps7a69b68f.jpg View Quote Which light is that? |
|
Cause and effect......Cause is over....Brace for effect....I prep.....what you do to brace yourself.....is at your discretion. But for those who don't prep.....I prep for you....in a different way......Me
|
Originally Posted By Legion556:
Johnny Pistol Build engraved from an 80%er http://s1318.photobucket.com/user/tjohnsonsrf/media/JohnnyPistol1_zps7a69b68f.jpg.htmlhttp:// http://i1318.photobucket.com/albums/t647/tjohnsonsrf/JohnnsyPistol2_zps1fc0342d.jpghttp://http://i1318.photobucket.com/albums/t647/tjohnsonsrf/JohnnyPistol3_zps672b6493.jpg View Quote Who did your engraving? Nice pistol! |
|
|
HSP Inforce WML on a haley strategic keymod offset mount
|
|
|
Thanks! A friend of mine locally did the engraving he does amazing work
|
|
|
|
Originally Posted By Rick_A:
Updated pics of my "firearm" build: [email=http://www.flickr.com/photos/38468288@N03/9927024394/]http://farm4.staticflickr.com/3674/9927024394_6a03d47d24_o.jpg[/email] 20130913_135237 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/9927123703/]http://farm8.staticflickr.com/7313/9927123703_6a9e0e3ccc_o.jpg[/email] 20130913_135114 by Slick_Rick77, on Flickr Fired it indoors for the first time yesterday. It was a lot more pleasant than I thought it would be. View Quote Specs? Specifically what barrel length is that and is the fh permanently attached. Debating between a 7.5 pistol or a > 26" firearm |
|
|
|
Originally Posted By M4md:
Spikes Upper Receiver Spikes CJ-15 Jolly Roger Lower Magpul MBUS front and rear Magpul grip Noveske 8.2 inch SS .300 Blackout barrel Spikes 9 inch BAR rail DD lower parts kit Noveske BCG Gunfighter charging handle KX3 Pig Waiting on tax stamp http://i.imgur.com/7i4m1l.jpghttp://i.imgur.com/gk5xol.jpg http://i.imgur.com/F44lDl.jpg View Quote Awesome books! Oh yea, and gun... |
|
|
|
|
|
Originally Posted By DAN-WES-BUT:
CMT-TAC Build <a href="http://s612.photobucket.com/user/BUTLERDANIEL70/media/DSCN1277.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt208/BUTLERDANIEL70/DSCN1277.jpg</a> <a href="http://s612.photobucket.com/user/BUTLERDANIEL70/media/DSCN1279.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt208/BUTLERDANIEL70/DSCN1279.jpg</a> <a href="http://s612.photobucket.com/user/BUTLERDANIEL70/media/DSCN1286.jpg.html" target="_blank">http://i612.photobucket.com/albums/tt208/BUTLERDANIEL70/DSCN1286.jpg</a> View Quote wow very different |
|
WARNING MY GRAMMAR SUCK MY SPELLING SUCK
nukldragr: If my count were any higher the little fuckers would jump out of my nuts and rob banks |
I don't have the specs on this, but my buddy just finished it a couple weeks ago and it sure is fun to shoot!
http://www.ammospy.net/images/9mmar.jpg AmmoSpy.net |
|
|
|
Ihttp://s1318.photobucket.com/user/tjohnsonsrf/media/JohnnyPistol1_zps7a69b68f.jpg.html?sort=3&o=2
http://s1318.photobucket.com/user/tjohnsonsrf/media/JohnnsyPistol2_zps1fc0342d.jpg.html?sort=3&o=1 http://s1318.photobucket.com/user/tjohnsonsrf/media/JohnnyPistol3_zps672b6493.jpg.html?sort=3&o=0 Due to a financial emergency I unfortunately have to let go of this beautiful memorial piece done in honor of John Noveske. Visit the listing on Arms List or Gun Broker if you are interested. |
|
|
...........
|
|
|
....................
|
|
|
Almost done with my pistol. Still needs an BCG and waiting on my Spikes buffer spring and Exile Machine buffer tube cover.
Aero Precision Upper/Lower AR Stoner 7" Barrel SLR Intrepid 7" Handguard Midway Gas tube YHM Gas Block Kaw Valley Comp PSA LPK JP Enterprise Reduced Power Spring BCM Ambi CH Umbrella Corp. Grip 23 Magpul XTM Handstop Magpul BUS Magpul MOE TG http://farm6.staticflickr.com/5464/10229810825_2c61497573.jpg |
|
|
edit
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.