User Panel
Posted: 3/16/2014 2:38:14 AM EDT
[Last Edit: Lancelot]
When discussing the Mk 18 / CQBR program, we can divide the history and discussion in to two distinct categories: 1) The weapon system itself / upper receiver supplied and 2) the group of accessories deployed on said weapon systems (SOPMOD).
---------- Mk 18 Mod 0 / CQBR The M4 carbine and M16 are not ideally suited for all missions, so it was proposed that the modularity of the M16 series would allow a user to replace the upper receiver of an existing weapon with one more suitable to the task. One of two proposed special mission receivers that were planned for inclusion into the SOPMOD Block II kit, the CQBR has taken off on its own. Like the proposed Special Purpose Receiver, the Close Quarters Battle Receiver has been more or less taken on by the Naval Surface Warfare Center, Crane Division (often referred to as NSWC-Crane or just "Crane") as its own project following the CQBR's removal from the SOPMOD program. Just as the Special Purpose Receiver morphed into the Special Purpose Rifle, and was type-classified as Mk 12 Mod 0/1, the complete CQBR-equipped carbine has been type-classified as the Mk 18 Mod 0. The purpose of the CQBR remains to provide operators with a weapon of submachine gun size, but firing a rifle cartridge, for scenarios such as VIP protection, urban warfare, and other close quarters battle (CQB) situations. The CQBR is designed to provide improvement over previous AR-15/M16-type weapons in this category. The CQBR is usually issued as a complete weapon system, and not just an upper receiver. The CQBR was once only available to Naval Special Warfare units, but the Mk 18 Mod 0 has become general issue for Visit, Board, Search, and Seizure (VBSS) missions and, as of 2006, for NCIS agents deploying to active combat zones.[citation needed] The Mk 18 is also used by the Coast Guard's Tactical Law Enforcement Teams, Maritime Safety and Security Teams, and Maritime Security Response Team and the United States Navy's Explosive Ordnance Disposal (EOD) Operators. Wikipedia has a good article with sources on the original CQBR/Mk 18 Mod 0 and its development. ---------- SOPMOD The SOPMOD Program Management Office at NSWC Crane, IN, provides standardized, versatile weapons accessories to meet needs across SOF mission scenarios. These accessories increase operator survivability and lethality by enhanced weapon performance, target acquisition, signature suppression, and fire control. The CQBR itself was originally part of the SOPMOD program as an accessory replacement upper receiver for the M4. However it was eventually separated out into its own project. SOPMOD accessories for the M4/CQBR originally included things like the KAC RIS/RAS, SOPMOD stock, KAC M4QD suppressor, AN/PEQ-2 illuminator/laser, ECOS-N red dot, ACOG, etc The SOPMOD program has gone through multiple minor and major evolutions throughout its lifetime. The most significant is commonly defined as "Block II" and included the introduction/replacement of accessories that met the updated needs of operators. The most visually significant "Block II" accessory is probably the replacement of the KAC rail/FSB with the Daniel Defense RIS II free float rail with low-profile gas block. Other updates include things like the Surefire SOCOM sound suppressor, EOTech RDS (553/SU-231 & EXPS 3-0/SU-231a), LA-5/PEQ ATPIAL, etc ---------- Link to docs and photo albums Presentation on CQBR from Crane Operator's Manual for Mk 18 Mod 0 SOPMOD Program Overview presentation from Crane Photo Album of Mk 18 Mod 0 Photo Album of CQBR with SOPMOD Block II accessories ---------- Because of the long history of both the CQBR/Mk 18 and SOPMOD programs, it's common to find weapons with various mixed configurations in the field, all depending on what time and unit the weapon system belongs to. Below are a few examples with descriptions to illustrate this. Example of a Mk 18 Mod 0 in as-issued configuration including: M16A1 surplus lower receiver, SOPMOD buttstock, KAC RIS, KAC M4QD flash hider, Aimpoint Comp M2 in Wilcox mount, LMT rear fixed sight, CQD rear sling plate. NSW Operator CQBRs with original SOPMOD accessories including KAC M4QD sound suppressor and AN/PEQ-2 IR Illuminator/Laser. Member of a Combat Camera team with a CQBR with KAC RAS and M4QD flash hider but with other updated accessories from the "Block II" SOPMOD kit including SU-231a (EOTech EXPS 3-0), EOTech G33 Magnifier, LA-5/PEQ ATPIAL, Insight WMX-200. Good example of "early" CQBR with SOPMOD Block II accessories including SU-231 (EOTech 553) and SU-233 (Insight M3x weaponlight). Example of a more "modern" CQBR with SOPMOD Block II accessories including the updated SU-231a (EOTech EXPS 3-0) and Insight WMX-200 weaponlight. Many times certain configurations are common within certain branches/groups. Here a Marine Raider is seen with a CQBR with an AN/PEQ-16 (USMC issued vs. the LA-5/PEQ SOCOM issued ATPIAL) and KAC NT4 suppressor (vs. the current Surefire SOCOM suppressor). ---------- Building a clone If you're interested in building a "clone" of a Mk 18 or CQBR equipped M4A1, here is a basic parts list to use as a guide and get you started. This list is not exhaustive and see the * note above regarding personalized accessories. | Mk 18 Mod 0 | M4A1 CQBR Block I | M4A1 CQBR Block II Lower Receiver | Mil-spec forged A1 | Mil-spec forged A2 | Mil-spec forged A2 Stock | Gen 1 SOPMOD (Black) | M4, CAR, SOPMOD, CTR & others | M4, CAR, SOPMOD, CTR & others Pistol Grip | A1 | A2, ERGO & others | A2, ERGO & others Rear Sling Plate | CQD | CQD | CQD Upper Receiver | Mil-spec forged M4 profile | Mil-spec forged M4 profile | Mil-spec forged M4 profile Barrel | 10.3" | 10.3" | 10.3" Rail | KAC RIS | KAC RAS | DD Mk18 RIS II (FDE) Rear BUIS | LMT Fixed | LMT Fixed, MATECH, & others | MATECH, KAC 300m, & others Front Sight | A2 FSB | A2 FSB | KAC 99051 BUIS (Taupe) Front Sling Attachment | FSB Sling Swivel | FSB Sling Swivel | CQD Muzzle Device | KAC M4QD | KAC M4QD | SureFire FH-556-RC Supressor | None | KAC QDSS NT4 | SureFire SOCOM556-RC (FDE) LAM | None | PEQ-2 | LA-5 Weaponlight | SureFire M962 | SureFire M952, M962 | Insight M3X (Tan), Insight WMX200 (Bronze) Optic | Aimpoint Comp M2 in Wilcox Mount | Aimpoint Comp M2 in QRP Mount, ACOG | EOTech 553 (Tan), EOTech EXPS3-0 (Tan), ELCAN 1-4x (FDE) ---------- Link to previous threads Previous Mk 18 / CQBR Thread Part I Previous Mk 18 / CQBR Thread Part II |
|
|
Hey guys , I've tried to contact the source of the DOD stickers,
But no luck. Do any of you have 4 or 5 you would like to sell? Shout me a e mail if you do. , thanks. Aaron |
|
|
Originally Posted By sweatpants:
Originally Posted By htomeheb:
Originally Posted By TinyCrumb:
I don't really care who's holding them, I think the Block I M4 shorties with Block II accessories awesome. Do you know the backstory here? Navy it seems, but women? And is that CADPAT mixed in with AOR? Canadians. And Navy Combat Camera. That is who you see in AOR2. |
|
|
Originally Posted By Trimdad:
Hey guys , I've tried to contact the source of the DOD stickers, But no luck. Do any of you have 4 or 5 you would like to sell? Shout me a e mail if you do. , thanks. Aaron View Quote Don't have any personally but if someone has a decent image of one I can recreate it in an art file that can be used for printing. |
|
|
Originally Posted By Trimdad:
Hey guys , I've tried to contact the source of the DOD stickers, But no luck. Do any of you have 4 or 5 you would like to sell? Shout me a e mail if you do. , thanks. Aaron View Quote I also had no response. A generous member offered to put some together and we found the art that Augee posted a while back; however, I haven heard any updates. I am not a patient man; therefore, I ordered some back-ups from PX Airsoft ( or something like that) in Hong Kong. They took PayPal, so I figured it was safe enough. They are definitely not as clone correct as Augee's art, but if they come in before our fellow team member can get some made, I'll post some pictures. |
|
|
Originally Posted By Thunder79:
I also had no response. A generous member offered to put some together and we found the art that Augee posted a while back; however, I haven heard any updates. I am not a patient man; therefore, I ordered some back-ups from PX Airsoft ( or something like that) in Hong Kong. They took PayPal, so I figured it was safe enough. They are definitely not as clone correct as Augee's art, but if they come in before our fellow team member can get some made, I'll post some pictures. View Quote View All Quotes View All Quotes Originally Posted By Thunder79:
Originally Posted By Trimdad:
Hey guys , I've tried to contact the source of the DOD stickers, But no luck. Do any of you have 4 or 5 you would like to sell? Shout me a e mail if you do. , thanks. Aaron I also had no response. A generous member offered to put some together and we found the art that Augee posted a while back; however, I haven heard any updates. I am not a patient man; therefore, I ordered some back-ups from PX Airsoft ( or something like that) in Hong Kong. They took PayPal, so I figured it was safe enough. They are definitely not as clone correct as Augee's art, but if they come in before our fellow team member can get some made, I'll post some pictures. I would gladly chip in for some as well. I also tried contacting that source and got blown off as well. |
|
|
|
Cool, thanks, forgot about it being the Holliday season,
|
|
|
Originally Posted By StealthGuy:
He has. http://www.defensereview.com/wp-content/uploads/2014/07/Jeff_Gurwitch_Article_Tactical_AR-15_M4_M4A1_Carbine_SBR_Sub_Carbine_Accessories_Part_II_DefenseReview.com_DR_PIC_I.jpg View Quote View All Quotes View All Quotes Originally Posted By StealthGuy:
Originally Posted By sweatpants:
Originally Posted By StealthGuy:
Originally Posted By sweatpants:
An interesting CQBR He's a member here. Dude needs to post his blaster more He has. http://www.defensereview.com/wp-content/uploads/2014/07/Jeff_Gurwitch_Article_Tactical_AR-15_M4_M4A1_Carbine_SBR_Sub_Carbine_Accessories_Part_II_DefenseReview.com_DR_PIC_I.jpg How does he run the blast shield and the surefire can? The Ferfrans blast shield doesn't work with a surefire brake does it? |
|
|
Originally Posted By allensaldi:
How does he run the blast shield and the surefire can? The Ferfrans blast shield doesn't work with a surefire brake does it? View Quote View All Quotes View All Quotes Originally Posted By allensaldi:
Originally Posted By StealthGuy:
Originally Posted By sweatpants:
Originally Posted By StealthGuy:
Originally Posted By sweatpants:
An interesting CQBR He's a member here. Dude needs to post his blaster more He has. http://www.defensereview.com/wp-content/uploads/2014/07/Jeff_Gurwitch_Article_Tactical_AR-15_M4_M4A1_Carbine_SBR_Sub_Carbine_Accessories_Part_II_DefenseReview.com_DR_PIC_I.jpg How does he run the blast shield and the surefire can? The Ferfrans blast shield doesn't work with a surefire brake does it? He swapped them out. |
|
|
I just got around to cleaning my CBQR after a few thousand rounds suppressed..
|
|
|
|
|
Is there a specific colt upper receiver that is GTG? Certain Markings "C" etc. or ia any flat top colt upper receiver GTG? I have a complete DD MK18 upper I plan to replace the upper receiver to get rid of the DD white markings.
|
|
|
Originally Posted By safetyoff:
Is there a specific colt upper receiver that is GTG? Certain Markings "C" etc. or ia any flat top colt upper receiver GTG? I have a complete DD MK18 upper I plan to replace the upper receiver to get rid of the DD white markings. View Quote I don't know if there are any other Colt M4 upper receivers besides the one. It will have the "C" stamped on it. I did the same thing though, swapped out the DD white marked upper for a Colt. |
|
|
Originally Posted By Stoner25mkiv: I don't know if there are any other Colt M4 upper receivers besides the one. It will have the "C" stamped on it. I did the same thing though, swapped out the DD white marked upper for a Colt. View Quote View All Quotes View All Quotes Originally Posted By Stoner25mkiv: Originally Posted By safetyoff: Is there a specific colt upper receiver that is GTG? Certain Markings "C" etc. or ia any flat top colt upper receiver GTG? I have a complete DD MK18 upper I plan to replace the upper receiver to get rid of the DD white markings. I don't know if there are any other Colt M4 upper receivers besides the one. It will have the "C" stamped on it. I did the same thing though, swapped out the DD white marked upper for a Colt. |
|
|
|
Originally Posted By hatexoc:
<a href="http://s1263.photobucket.com/user/hatexoc/media/0A7F5F10-AF3B-40EB-B1E4-E20502E149DD_zps8nmjk53e.jpg.html" target="_blank">http://i1263.photobucket.com/albums/ii640/hatexoc/0A7F5F10-AF3B-40EB-B1E4-E20502E149DD_zps8nmjk53e.jpg</a> Just left Capitol armory with my new can! View Quote Bringing something else home to make your wife less mad? Congrats the rig looks awesome! |
|
|
Originally Posted By hatexoc:
<a href="http://s1263.photobucket.com/user/hatexoc/media/0A7F5F10-AF3B-40EB-B1E4-E20502E149DD_zps8nmjk53e.jpg.html" target="_blank">http://i1263.photobucket.com/albums/ii640/hatexoc/0A7F5F10-AF3B-40EB-B1E4-E20502E149DD_zps8nmjk53e.jpg</a> Just left Capitol armory with my new can! View Quote Looks like a good day, a box of 223, a new can, and a purse. |
|
One of God's own prototypes...
|
Originally Posted By Conspiro-Agnew:
Looks like a good day, a box of 223, a new can, and a purse. View Quote View All Quotes View All Quotes Originally Posted By Conspiro-Agnew:
Originally Posted By hatexoc:
<a href="http://s1263.photobucket.com/user/hatexoc/media/0A7F5F10-AF3B-40EB-B1E4-E20502E149DD_zps8nmjk53e.jpg.html" target="_blank">http://i1263.photobucket.com/albums/ii640/hatexoc/0A7F5F10-AF3B-40EB-B1E4-E20502E149DD_zps8nmjk53e.jpg</a> Just left Capitol armory with my new can! Looks like a good day, a box of 223, a new can, and a purse. LOL. Good eye. I didn't even see the purse bag |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
|
You can almost always tell how many firearms a man owns by how many Coach purses his wife has.
Let's just say that my wife has a ton of Coach purses. We get off pretty easy considering. Her Coach bags are far cheaper than any of my rifles, and cheaper than most of my optics as well. |
|
"They are not men, they are weapons."
It's not me, it's the BRD talking. |
Originally Posted By AR-Ryan21: You can almost always tell how many firearms a man owns by how many Coach purses his wife has. Let's just say that my wife has a ton of Coach purses. We get off pretty easy considering. Her Coach bags are far cheaper than any of my rifles, and cheaper than most of my optics as well. View Quote Tier one operators buy their wives LV purses. Fortunately, my wife is perfectly happy with three.
|
|
|
Originally Posted By PFran42: Tier one operators buy their wives LV purses. Fortunately, my wife is perfectly happy with three. View Quote View All Quotes View All Quotes Originally Posted By PFran42: Originally Posted By AR-Ryan21: You can almost always tell how many firearms a man owns by how many Coach purses his wife has. Let's just say that my wife has a ton of Coach purses. We get off pretty easy considering. Her Coach bags are far cheaper than any of my rifles, and cheaper than most of my optics as well. Tier one operators buy their wives LV purses. Fortunately, my wife is perfectly happy with three. |
|
|
Originally Posted By hatexoc:
<a href="http://s1263.photobucket.com/user/hatexoc/media/0A7F5F10-AF3B-40EB-B1E4-E20502E149DD_zps8nmjk53e.jpg.html" target="_blank">http://i1263.photobucket.com/albums/ii640/hatexoc/0A7F5F10-AF3B-40EB-B1E4-E20502E149DD_zps8nmjk53e.jpg</a> Just left Capitol armory with my new can! View Quote I want mine bad. |
|
|
Originally Posted By AR-Ryan21:
You can almost always tell how many firearms a man owns by how many Coach purses his wife has. Let's just say that my wife has a ton of Coach purses. We get off pretty easy considering. Her Coach bags are far cheaper than any of my rifles, and cheaper than most of my optics as well. View Quote My wife prefers guns to overpriced status symbols. |
|
tweeter:
After work today I'm gonna take off my pants and start this revolution. Originally Posted By BobRoberts: In and around my mouth, bouncing off my chin, off my taint, basically everywhere. |
Originally Posted By PFran42:
Tier one operators buy their wives LV purses. Fortunately, my wife is perfectly happy with three. View Quote View All Quotes View All Quotes Originally Posted By PFran42:
Originally Posted By AR-Ryan21:
You can almost always tell how many firearms a man owns by how many Coach purses his wife has. Let's just say that my wife has a ton of Coach purses. We get off pretty easy considering. Her Coach bags are far cheaper than any of my rifles, and cheaper than most of my optics as well. Tier one operators buy their wives LV purses. Fortunately, my wife is perfectly happy with three. Oh, my wife has two LV bags. She has like two dozen Coach bags though. |
|
"They are not men, they are weapons."
It's not me, it's the BRD talking. |
Originally Posted By safetyoff:
Gotcha and M4 stamped on the front of the flat top rail where it mates to the RIS II right? View Quote View All Quotes View All Quotes Originally Posted By safetyoff:
Originally Posted By Stoner25mkiv:
Originally Posted By safetyoff:
Is there a specific colt upper receiver that is GTG? Certain Markings "C" etc. or ia any flat top colt upper receiver GTG? I have a complete DD MK18 upper I plan to replace the upper receiver to get rid of the DD white markings. I don't know if there are any other Colt M4 upper receivers besides the one. It will have the "C" stamped on it. I did the same thing though, swapped out the DD white marked upper for a Colt. correct |
|
|
Originally Posted By AR-Ryan21:
You can almost always tell how many firearms a man owns by how many Coach purses his wife has. Let's just say that my wife has a ton of Coach purses. We get off pretty easy considering. Her Coach bags are far cheaper than any of my rifles, and cheaper than most of my optics as well. View Quote I wish... my wife is a shooter. Her Christmas was an EoTech XPS-3 for her SBR and an HK45 CT. Also a recurve, because she wants to get into bow hunting. |
|
One of God's own prototypes...
|
"If you can't pick your shit up at 3pm or 0300 and it's configured to get it done 0-400m in seconds, sideways, upside down, or unstable... your a daylight range clown." - Dano5326
|
Originally Posted By StealthGuy:
I want mine bad. View Quote View All Quotes View All Quotes Originally Posted By StealthGuy:
Originally Posted By hatexoc:
<a href="http://s1263.photobucket.com/user/hatexoc/media/0A7F5F10-AF3B-40EB-B1E4-E20502E149DD_zps8nmjk53e.jpg.html" target="_blank">http://i1263.photobucket.com/albums/ii640/hatexoc/0A7F5F10-AF3B-40EB-B1E4-E20502E149DD_zps8nmjk53e.jpg</a> Just left Capitol armory with my new can! I want mine bad. Ya I was pretty excited about this one I got a PAC timer for Christmas so I plan on dojng a lot of drills tomorrow. |
|
|
Originally Posted By secretwheelman:
That's a Durango, but I'm interested in that question as well. View Quote View All Quotes View All Quotes Originally Posted By secretwheelman:
Originally Posted By gaston4:
Originally Posted By sweatpants:
Canadians. There's a picture missing that has a shoulder patch. http://i1080.photobucket.com/albums/j337/ert185/289DE97E-58C8-4C6F-86C4-DCA469202EE4-29537-000005056C40B467.jpg AZ license plate on the jeep. Any info on where they were training? Those pics were taken in CA at Burro canyon, the instructors are with TFTT/DAG. there was also a video posted a few times in this thread of them instructing cqb/breach/clear to non-"high speed" types at the same range. |
|
|
Originally Posted By G_MAN:
Those pics were taken in CA at Burro canyon, the instructors are with TFTT/DAG. there was also a video posted a few times in this thread of them instructing cqb/breach/clear to non-"high speed" types at the same range. View Quote View All Quotes View All Quotes Originally Posted By G_MAN:
Originally Posted By secretwheelman:
Originally Posted By gaston4:
Originally Posted By sweatpants:
Canadians. There's a picture missing that has a shoulder patch. http://i1080.photobucket.com/albums/j337/ert185/289DE97E-58C8-4C6F-86C4-DCA469202EE4-29537-000005056C40B467.jpg AZ license plate on the jeep. Any info on where they were training? Those pics were taken in CA at Burro canyon, the instructors are with TFTT/DAG. there was also a video posted a few times in this thread of them instructing cqb/breach/clear to non-"high speed" types at the same range. Yeah it's somewhat old. Might have even been posted in the old MK18 thread. |
|
"Patriotism is supporting your country all the time, and your government when it deserves it." - Mark Twain
|
Originally Posted By TinyCrumb:
Q: What's the quickest way at first glance to tell the difference between a mil and civi Block II? A: Ladders on every spare inch of rail. ETA: Pic thread: http://jb83.me/Ur28+ View Quote I'd rather keep my ladders, shooting on a bare rail without gloves is painful. |
|
|
Squire
CVMA Chapter 24-2 "Ideals are peaceful. History is violent"- War Daddy |
Originally Posted By Tmender03:
I'd rather keep my ladders, shooting on a bare rail without gloves is painful. View Quote View All Quotes View All Quotes Originally Posted By Tmender03:
Originally Posted By TinyCrumb:
Q: What's the quickest way at first glance to tell the difference between a mil and civi Block II? A: Ladders on every spare inch of rail. ETA: Pic thread: http://jb83.me/Ur28+ I'd rather keep my ladders, shooting on a bare rail without gloves is painful. It's not bad this time of the year, they keep my hands warm, but in the summer I have to but on TD rail covers. The ladder ones are useless. |
|
|
|
Originally Posted By StealthGuy:
So my dad bought a QR code maker. He made me my own personal label. Pretty cool. Is 3W544 the correct Cage code for LMT? <a href="http://s578.photobucket.com/user/DeltaBF2s/media/Mobile%20Uploads/image-36.jpg.html" target="_blank">http://i578.photobucket.com/albums/ss227/DeltaBF2s/Mobile%20Uploads/image-36.jpg</a> View Quote Nice! Not sure if the code is correct or not, but I need one. |
|
In the absence of a plan, move toward the sound of gunfire and kill everything.
|
Originally Posted By MILSPEC556:
Nice! Not sure if the code is correct or not, but I need one. View Quote View All Quotes View All Quotes Originally Posted By MILSPEC556:
Originally Posted By StealthGuy:
So my dad bought a QR code maker. He made me my own personal label. Pretty cool. Is 3W544 the correct Cage code for LMT? <a href="http://s578.photobucket.com/user/DeltaBF2s/media/Mobile%20Uploads/image-36.jpg.html" target="_blank">http://i578.photobucket.com/albums/ss227/DeltaBF2s/Mobile%20Uploads/image-36.jpg</a> Nice! Not sure if the code is correct or not, but I need one. It's pretty cool. I'm gonna head over there on the weekend and see if I can make one for my MK25 too. |
|
|
Originally Posted By AR-Ryan21:
You can almost always tell how many firearms a man owns by how many Coach purses his wife has. Let's just say that my wife has a ton of Coach purses. We get off pretty easy considering. Her Coach bags are far cheaper than any of my rifles, and cheaper than most of my optics as well. View Quote My wife has two. Yes I bought them. Obviously, I got off easy. She gave up bitching about guns and ammo forts a long time ago |
|
|
Originally Posted By StealthGuy:
So my dad bought a QR code maker. He made me my own personal label. Pretty cool. Is 3W544 the correct Cage code for LMT? <a href="http://s578.photobucket.com/user/DeltaBF2s/media/Mobile%20Uploads/image-36.jpg.html" target="_blank">http://i578.photobucket.com/albums/ss227/DeltaBF2s/Mobile%20Uploads/image-36.jpg</a> View Quote Awesome! Yeah, 3W544 LMT's Cage Code. |
|
"Patriotism is supporting your country all the time, and your government when it deserves it." - Mark Twain
|
|
|
|
|
Can someone take a pic of their locking ring on their surefire can? Is it offset?
I can't get mine to lock on I just shot it and my can flew 15 yards. It has me worried what am I doing wrong |
|
|
Originally Posted By hatexoc:
Can someone take a pic of their locking ring on their surefire can? Is it offset? I can't get mine to lock on I just shot it and my can flew 15 yards. It has me worried what am I doing wrong View Quote No pics but the locking ring is offset. Hopefully no damage to the can? |
|
I hope my guns killed someone before they moved in with me. Shit, I hope they go out at night and kill bad guys while I'm sleeping.-30calTBLkid
|
Who makes the most correct & sells the CAG Code stickers here?
|
|
|
|
Originally Posted By hatexoc:
<a href="http://s1263.photobucket.com/user/hatexoc/media/DE17FB26-458D-4837-AD82-402A34399ACA_zps7vp0anwv.jpg.html" target="_blank">http://i1263.photobucket.com/albums/ii640/hatexoc/DE17FB26-458D-4837-AD82-402A34399ACA_zps7vp0anwv.jpg</a> All this rubbing doesn't seem right, this was a brand new flash hider/ suppressor View Quote I don't know if it matters, but where are the shims? Is the FH Rocketted on well? |
|
"Stay Alert, Stay Alive."- Me
"If we ever forget that we are One Nation Under God, then we will be a nation gone under." "Poor prior planning on your part does not constitute an emergency on mine." |
Originally Posted By warpig8654:
I don't know if it matters, but where are the shims? Is the FH Rocketted on well? View Quote View All Quotes View All Quotes Originally Posted By warpig8654:
Originally Posted By hatexoc:
<a href="http://s1263.photobucket.com/user/hatexoc/media/DE17FB26-458D-4837-AD82-402A34399ACA_zps7vp0anwv.jpg.html" target="_blank">http://i1263.photobucket.com/albums/ii640/hatexoc/DE17FB26-458D-4837-AD82-402A34399ACA_zps7vp0anwv.jpg</a> All this rubbing doesn't seem right, this was a brand new flash hider/ suppressor I don't know if it matters, but where are the shims? Is the FH Rocketted on well? I was under the impression that you didn't need to shim a 3P. I don't have an RC yet but my other suppressor with a vortex style mount has similar marks. |
|
|
Originally Posted By sweatpants:
I was under the impression that you didn't need to shim a 3P. I don't have an RC yet but my other suppressor with a vortex style mount has similar marks. View Quote View All Quotes View All Quotes Originally Posted By sweatpants:
Originally Posted By warpig8654:
Originally Posted By hatexoc:
<a href="http://s1263.photobucket.com/user/hatexoc/media/DE17FB26-458D-4837-AD82-402A34399ACA_zps7vp0anwv.jpg.html" target="_blank">http://i1263.photobucket.com/albums/ii640/hatexoc/DE17FB26-458D-4837-AD82-402A34399ACA_zps7vp0anwv.jpg</a> All this rubbing doesn't seem right, this was a brand new flash hider/ suppressor I don't know if it matters, but where are the shims? Is the FH Rocketted on well? I was under the impression that you didn't need to shim a 3P. I don't have an RC yet but my other suppressor with a vortex style mount has similar marks. You do. I remember a whole long discussion about it |
|
Originally Posted By SuperMoose:
Wait you mean someone who goes on a shooting spree stops when they meet the possibility of resistance? What a novel fucking concept. |
Originally Posted By AR-Ryan21:
You can almost always tell how many firearms a man owns by how many Coach purses his wife has. Let's just say that my wife has a ton of Coach purses. We get off pretty easy considering. Her Coach bags are far cheaper than any of my rifles, and cheaper than most of my optics as well. View Quote After I purchased my SR25, I graduated from Coach/Michael Kors to Louis Vitton's and Gucci's for my wife..ng is ETA: didn't see all the responses after I quoted this. Thing is, she really doesn't even ask or wants those purses, it's just my guilt kicking in cause she never asks how much I spend and when she does (wanting to buy me b-day presents etc), I alway just tell her a few hundred dollars..LOL |
|
Freedom is not Free..
The 2nd Amendment is a RIGHT, not a Privilege... Gun Gallery 4 Life: "Sellng Guns, Changing People's Lives" |
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.