AR Sponsor
SBR picture and discussion thread (Page 1 of 238)
Posted: 11/24/2008 8:13:23 PM EDT
[Last Edit: Postal0311][Edited]
|
Formerly the MK18 / CQBR / L119 / Variants Thread Part 2
Part 2 to this thread: http://www.ar15.com/forums/topic.html?b=3&f=118&t=271832&page=1 The CQB-R is a short barrel upper for the M4 weapon system. Later the Upper on an M4A1 or rebuilt M16 lower is designated by the US Navy at the MK18Mod0 The CQB-R / MK18 Mod O is generally(but not always) 10/10.3/10.5 inch barrel KAC RIS or RAS KAC NT4 Suppressor Mount LMT Rear Sight or KAC 300m Flip Up Rear Sight LMT Sopmod stock CQD Rear sling mount CQD forward sling mount Optics are often an Aimpoint M2 or ACOG. The Block II CQBR replaces the Knights rail and the fixed front sight base with a Daniel Defense MK18RISII rail. Knights flip up front sight is often used. When rear sights are seen they are often either KAC or Matech. Our British friends have the L119 carbine. The L119 is similar to a MK18MOD0. The rifle is made in Canada, with a 10 inch barrel. Every pictures I have seen the the L119 has a Trijicon TA31 or a TA01NSN ACOG that has a piggyback Trijicon MRD. Note: There is the L119, and the L119A1. I have seen both used to refer to the carbine, and I am not sure which is the proper nomenclature. Yada yada yada, will edit inore info later. Including some of the LMT 10.5 vs Colt 10.3 argument. |
Originally Posted By Mopseydocks6014:
"I just had never heard that comps will make the weapon louder."
"I just had never heard that comps will make the weapon louder."
|
Originally Posted By M4A2_L073754:
Originally Posted By aimpointed:
Originally Posted By Bklyn_Irish:
Originally Posted By xm8:
Originally Posted By Bklyn_Irish:
This is what I had on hand. http://i255.photobucket.com/albums/hh126/bklynirish/BushmasterM4geryDoublestarA4gery004.jpg This is the beginning of Mk 18 Mod 0 clone. Barrel cut down by ADCO, now waiting on the paperwork. http://i255.photobucket.com/albums/hh126/bklynirish/DSCN1186.jpg Not quite sure what I am going to do with the Aimpoint mount, if anything. It's taken a decent beating, and hasn't failed me yet. Very nice. The correct mount for the Mod 0 clone is the Wilcox P/N 13600G01. Keeping an eye out for one. PRI is the same mount, but easier to find Brownells has them in stock. Wilcox MN There's at least one for sale in the old EE 
|
|
Originally Posted By Pacs:
As close as I can get. http://i459.photobucket.com/albums/qq314/Pacs100/Rifles/036.jpg?t=1259085169 i know it's not a clone, but this is still the sweetest SBR i've seen on here yet! 
great job! you've inspired me! |
|
I will have one when i get a stamp.Its pistol right now with a LMT 10.5 upper...can't decide which buttstock i will get, maybe the LMT.
I have a Kx3 for it too that i've shot it with.RRA lower,BCM BCG,Spikes St-2T.I love it. 
|
Igitur qui desiderat pacem, praeparet bellum
|
Originally Posted By eternal24k:
http://i193.photobucket.com/albums/z152/eternal24k/014-2.jpg?t=1260378839 My M18ish build is on its way who did the recievers? |
|
Originally Posted By KAC_RECCE:
Originally Posted By eternal24k:
http://i193.photobucket.com/albums/z152/eternal24k/014-2.jpg?t=1260378839 My M18ish build is on its way who did the recievers? Looks like spikes. |
|
Finally am able to join the club! Been wanting a MK18 for years now... Moved to TX and one of the first things I did was get my stamps!
LMT Defender SOPMOD Lower LMT 10.5" Upper LMT BUIS Aimpoint M2 in Wilcox mount KAC RAS COLT M-16 BCG 
|
|
Originally Posted By new_ak_fan:
Finally am able to join the club! Been wanting a MK18 for years now... Moved to TX and one of the first things I did was get my stamps! LMT Defender SOPMOD Lower LMT 10.5" Upper LMT BUIS Aimpoint M2 in Wilcox mount KAC RAS <a href="http://img13.imageshack.us/i/mk18s.jpg/" target="_blank">http://img13.imageshack.us/img13/4301/mk18s.jpg</a> Wow. That's pretty much a perfect clone. Looks good. 
|
Step out of the left-right paradigm and get an independent perspective on world affairs. Become a fan of Truth Be Told.
http://www.facebook.com/pages/Truth-Be-Told/161549309532?ref=share
http://www.facebook.com/pages/Truth-Be-Told/161549309532?ref=share
|
Originally Posted By new_ak_fan:
Finally am able to join the club! Been wanting a MK18 for years now... Moved to TX and one of the first things I did was get my stamps! LMT Defender SOPMOD Lower LMT 10.5" Upper LMT BUIS Aimpoint M2 in Wilcox mount KAC RAS <a href="http://img13.imageshack.us/i/mk18s.jpg/" target="_blank">http://img13.imageshack.us/img13/4301/mk18s.jpg</a> Is that in your tub?! |
www.gungalleryjax.com
FDCC - www.fldcc.com/
Duffy - "Dang URX Mafia"
FDCC - www.fldcc.com/
Duffy - "Dang URX Mafia"
|
Originally Posted By new-arguy:
Originally Posted By new_ak_fan:
Finally am able to join the club! Been wanting a MK18 for years now... Moved to TX and one of the first things I did was get my stamps! LMT Defender SOPMOD Lower LMT 10.5" Upper LMT BUIS Aimpoint M2 in Wilcox mount KAC RAS <a href="http://img13.imageshack.us/i/mk18s.jpg/" target="_blank">http://img13.imageshack.us/img13/4301/mk18s.jpg</a> Is that in your tub?! Jacuzzi. |
-Only two defining forces have ever offered to die for you, Jesus Christ and the American G.I. ~ One died for your soul, the other for your freedom.
-One good shoot by a citizen can clear up more open cases than a week of detective work!
-One good shoot by a citizen can clear up more open cases than a week of detective work!
|
Originally Posted By new-arguy:
Originally Posted By new_ak_fan:
Finally am able to join the club! Been wanting a MK18 for years now... Moved to TX and one of the first things I did was get my stamps! LMT Defender SOPMOD Lower LMT 10.5" Upper LMT BUIS Aimpoint M2 in Wilcox mount KAC RAS <a href="http://img13.imageshack.us/i/mk18s.jpg/" target="_blank">http://img13.imageshack.us/img13/4301/mk18s.jpg</a> Is that in your tub?! It is indeed! Found it to be the best place to take pics without a legit setup. |
|
Originally Posted By new_ak_fan:
<a href="http://img13.imageshack.us/i/mk18s.jpg/" target="_blank">http://img13.imageshack.us/img13/4301/mk18s.jpg</a> Nice to see a legit, spec Mk18 build in the Mk18 forum. Very nice job! |
|
Originally Posted By Glass1:
Originally Posted By new_ak_fan:
<a href="http://img13.imageshack.us/i/mk18s.jpg/" target="_blank">http://img13.imageshack.us/img13/4301/mk18s.jpg</a> Nice to see a legit, spec Mk18 build in the Mk18 forum. Very nice job! thanks! |
Hi-Res 
Hi-Res 
Hi-Res 
Hi-Res 
Bad ass Hi-Res
REALLY Bad ass Hi-res
|
"No need to thank me - I'm just a guy with a gun"
| So, sounds like Anvil Arms is out for doing the Mk 18 engraving. Who else have y’all used to do your Mk 18 engraving? |
|
Originally Posted By ch139:
So, sounds like Anvil Arms is out for doing the Mk 18 engraving. Who else have y’all used to do your Mk 18 engraving? Well? Bueller? Bueller? Bueller? |
|
Originally Posted By GhostRing:
http://www.navy.mil/management/photodb/webphoto/web_090219-N-6278K-006.jpg Hi-Res For some reason, this thing on the front of the boat makes me strangely horny 
|
|
Originally Posted By new_ak_fan: Originally Posted By new-arguy: Originally Posted By new_ak_fan: Finally am able to join the club! Been wanting a MK18 for years now... Moved to TX and one of the first things I did was get my stamps! LMT Defender SOPMOD Lower LMT 10.5" Upper LMT BUIS Aimpoint M2 in Wilcox mount KAC RAS <a href="http://img13.imageshack.us/i/mk18s.jpg/" target="_blank">http://img13.imageshack.us/img13/4301/mk18s.jpg</a> Is that in your tub?! It is indeed! Found it to be the best place to take pics without a legit setup. It IS the best place per Stickman's old thread on how to take great clean pics. He was the first to suggest the bathtub but he did suggest to crank up the white balance so that any details in the surface of the tub will wash out. Nice rifle.
|
Not gunna lie dude if you didn't have a team membership I probably would have got you one after the severe ass kicking you handed to these fucktards -Foxnews_FTW
Still working on a cool forum title....
Joined:
Jan 2003
Posts:
2548
EE: 100% (41)
SC, USA
|
Originally Posted By M4A2_L073754:
Originally Posted By aimpointed:
Originally Posted By Bklyn_Irish:
Originally Posted By xm8:
Originally Posted By Bklyn_Irish:
This is what I had on hand. http://i255.photobucket.com/albums/hh126/bklynirish/BushmasterM4geryDoublestarA4gery004.jpg This is the beginning of Mk 18 Mod 0 clone. Barrel cut down by ADCO, now waiting on the paperwork. http://i255.photobucket.com/albums/hh126/bklynirish/DSCN1186.jpg Not quite sure what I am going to do with the Aimpoint mount, if anything. It's taken a decent beating, and hasn't failed me yet. Very nice. The correct mount for the Mod 0 clone is the Wilcox P/N 13600G01. Keeping an eye out for one. PRI is the same mount, but easier to find Brownells has them in stock. Wilcox MN Just waiting on the stamp. 
|
"Whisky for the gentlemen that like it. And for the gentlemen that don't like it - Whisky!" -Alec Guinness as MAJ (acting Colonel) Jock Sinclair, D.S.O., M.M. "Tunes of Glory"
|
Anyone just buy the complete colt mk18 receiver group? I see them here
http://www.specializedarmament.com/products/UPPER_RECEIVER_GROUP_M4CQB_MK18_NO_BOLT_GRP_OR_CHARGING_HANDLE_FLAT_TOP_UPPER_10_3in_260mm_1_7-863-4.html http://www.specializedarmament.com/products/UPPER_RECEIVER_GROUP_M4CQB_MK18_W_BOLT_GRP_OR_CHARGING_HANDLE_FLAT_TOP_UPPER_10_3in_260mm_1_7-864-4.html |
|
Originally Posted By UrbancommandoX:
Anyone just buy the complete colt mk18 receiver group? I see them here http://www.specializedarmament.com/products/UPPER_RECEIVER_GROUP_M4CQB_MK18_NO_BOLT_GRP_OR_CHARGING_HANDLE_FLAT_TOP_UPPER_10_3in_260mm_1_7-863-4.html http://www.specializedarmament.com/products/UPPER_RECEIVER_GROUP_M4CQB_MK18_W_BOLT_GRP_OR_CHARGING_HANDLE_FLAT_TOP_UPPER_10_3in_260mm_1_7-864-4.html thats expensive...what brand is it? made it hot...i'm lazy... http://www.specializedarmament.com/products/UPPER_RECEIVER_GROUP_M4CQB_MK18_NO_BOLT_GRP_OR_CHARGING_HANDLE_FLAT_TOP_UPPER_10_3in_260mm_1_7-863-4.html |
Igitur qui desiderat pacem, praeparet bellum
|
Originally Posted By tat2steve:
I've noticed very little is written about barrel twist, granted the early barrels that were cut down M4's were 1-7 twist, is the 1-7 considered the norm in the MK18 or is 1-9 used also ? All 1-7 twist. |
Questions are a burden to you and a danger to others. - Eugene H. Krabs
|
Originally Posted By texjames:
Originally Posted By UrbancommandoX:
Anyone just buy the complete colt mk18 receiver group? I see them here http://www.specializedarmament.com/products/UPPER_RECEIVER_GROUP_M4CQB_MK18_NO_BOLT_GRP_OR_CHARGING_HANDLE_FLAT_TOP_UPPER_10_3in_260mm_1_7-863-4.html http://www.specializedarmament.com/products/UPPER_RECEIVER_GROUP_M4CQB_MK18_W_BOLT_GRP_OR_CHARGING_HANDLE_FLAT_TOP_UPPER_10_3in_260mm_1_7-864-4.html thats expensive...what brand is it? made it hot...i'm lazy... http://www.specializedarmament.com/products/UPPER_RECEIVER_GROUP_M4CQB_MK18_NO_BOLT_GRP_OR_CHARGING_HANDLE_FLAT_TOP_UPPER_10_3in_260mm_1_7-863-4.html The real thing all colt |
|
Originally Posted By Matt85:
Aside from the accessories, what is the difference between the Colt 6933 upper and the upper that Specialized Armament is selling? The 6933 has a LW 11.5" barrel. The MK18 barrel from SAW is 10.3 gov't. |
"You can take the man out of the Marine Corps but you can never take the Marine Corps out of the man"
"If I wanted your opinion I would give it to you" - Gunny
Jesus is my lord & savior.
"If I wanted your opinion I would give it to you" - Gunny
Jesus is my lord & savior.
|
Originally Posted By Bklyn_Irish:
Originally Posted By M4A2_L073754:
Originally Posted By aimpointed:
Originally Posted By Bklyn_Irish:
Originally Posted By xm8:
Originally Posted By Bklyn_Irish:
This is what I had on hand. http://i255.photobucket.com/albums/hh126/bklynirish/BushmasterM4geryDoublestarA4gery004.jpg This is the beginning of Mk 18 Mod 0 clone. Barrel cut down by ADCO, now waiting on the paperwork. http://i255.photobucket.com/albums/hh126/bklynirish/DSCN1186.jpg Not quite sure what I am going to do with the Aimpoint mount, if anything. It's taken a decent beating, and hasn't failed me yet. bklyn does the iron co-witness or is is in the lower 3rd of the aimpoint? Very nice. The correct mount for the Mod 0 clone is the Wilcox P/N 13600G01. Keeping an eye out for one. PRI is the same mount, but easier to find Brownells has them in stock. Wilcox MN Just waiting on the stamp. http://i255.photobucket.com/albums/hh126/bklynirish/DSCN1250.jpg |
|
Not an exact clone but has a lot of the features of a Mk18.
10/10.3/10.5 inch barrel Check KAC RIS or RAS LMT MRP KAC NT4 Suppressor Mount AAC M4 2K suppressor mount LMT Rear Sight or KAC 300m Flip Up Rear Sight Check LMT Sopmod stock Check CQD Rear sling mount Check CQD forward sling mount Check 
|
"when it's all over, the bad guys are going to have flies walking across their eyeballs".....C. Black 2001
|
Originally Posted By eternal24k:
http://i193.photobucket.com/albums/z152/eternal24k/044.jpg?t=1263864506 Love the color of your receivers.......can you give me the skinny? |
"when it's all over, the bad guys are going to have flies walking across their eyeballs".....C. Black 2001
|
Originally Posted By thebomber:
Originally Posted By eternal24k:
http://i193.photobucket.com/albums/z152/eternal24k/044.jpg?t=1263864506 Love the color of your receivers.......can you give me the skinny? Looks like an LWRC-that one comes factory anodized in that color. |
|
Originally Posted By Hispeed_1:
Originally Posted By thebomber:
Originally Posted By eternal24k:
http://i193.photobucket.com/albums/z152/eternal24k/044.jpg?t=1263864506 Love the color of your receivers.......can you give me the skinny? Looks like an LWRC-that one comes factory anodized in that color. You're right, I should have recognized it.....thx. |
"when it's all over, the bad guys are going to have flies walking across their eyeballs".....C. Black 2001
|
Originally Posted By eternal24k:
Actually... http://i193.photobucket.com/albums/z152/eternal24k/007-3-1.jpg?t=1263869580 ETA, it matches up very well to the RISII Mk18 Awesome dude......gonna have to buy a set unless there is a duracoat alternative. ETA...where on the website is the option for that color? |
"when it's all over, the bad guys are going to have flies walking across their eyeballs".....C. Black 2001
SBR picture and discussion thread (Page 1 of 238)
AR Sponsor
Join the Community
Your next conversation starts here.
Create your free account to join discussions, share your experience, save topics, and connect with the AR15.COM community.
- Join discussions
- Follow topics and replies
- Connect with fellow enthusiasts
Already a member? Sign in
Stay informed by subscribing to our Newsletter