Guys, come on. You reply to me with some canned system lookup and have completely ignored the real problem.

I've spent time taking pictures, laying out in detail what the problem is and your parts are still incompatible.

Please put this in front of you AK armorer, show him the picture in this thread, my PMs and or my other thread. That person should quickly see what's going on, this couldn't take more than 5 minutes, but we're going on 2 months now.

Original Thread:PSAK-47 Premium Single Hook Semi Auto Fire Control Group

Picture of the problem:

Since you guys have no idea how to help me.

Should I just return the trigger kit, the whole rifle or both for a refund?

Perhaps you would get more answers out of this posting it in the AK section?

Been a while since I took my fcg apart and safety out but cany you just instal the safety then the fcg?

No, because the fcg reatainer needs to be in place prior to inserting the safety lever.

So you replaced the original Fire control group, which was working, with a second fire control group, which is not.

CS has offered to replace the second fire control group, or any other parts you feel need replacing.

Without examining the rifle in person to see what is actually going on, there is not much else we can do.  

IM sent.

get a Tapco G2 single hook and smooth out the hammer

I had that same issue on a different AK. Take a file and remove some material off the safety selector where it contacts the disconnector during assembly. It's non functional anyway, that part that contacts the disco during install is NOT the part that prevents the trigger travel (the longer portion does that, it only contacts one trigger leg.. the right side one). 5 min job with a file as you won't need to remove much. Be forewarned though... that steel is HARD and you'll have to put some muscle behind the file (a vice helps).

From your picture, I think I had a similar issue with an ALG trigger I bought. To get it to clear I just rotated the safety the oposite way to install. When I installed my psa trigger I installed safety by by rotating toward the barrel..with the ALG trigger  I could not get safety to clear it by rotating toward barrel so I had to rotate toward stock and watch what I was doing....safety installed.

I have tools that will eat through that like a hot knife through butter. However, the problem here is a PSA built gun and a PSA trigger kit that don't work together. I shouldn't need to have shop tools handy to modify parts and compromise a warranty. Thank you for taking the time to answer me, you seem to understand the problem better than PSA.

Yes, after some time looking at it. I too concluded the only possible way to clear it without grinding anything is to rotate it backwards while installing. However, I have installed a Zhukov stock and there is no clearance without bending the safety lever. I shouldn't need to disassemble the stock to install/remove the safety lever. I really appreciate your thoughts on this, thank you.

Did you even read anything I've submitted?

Is it not clear from the picture that the safety lever you guys installed in a complete rifle I bought from you is not compatible with and add on kit also bought from you?

Sequence of events to date:

1.) I bought a complete rifle from PSA

2.) I bought a complete trigger kit from PSA for #1

3.) Trigger kit is not compatible with the safety lever originally installed by PSA for #1

4.) Already sent the kit back and received another kit from PSA with the same exact kind of parts

5.) Trigger kit is still not compatible with the safety lever originally installed for #1

6.) I have asked PSA directly through CS and this forum "WHAT SAFETY LEVER IS COMPATIBLE WITH THE TRIGGER KIT THAT YOU (PSA) SOLD ME?"

In short... Does item #516444946 fit with item #516444914 because the PICTURES & DESCRIPTION don't tell me squat, just like every one of your responses.

Yes.

We are not seeing the issues you describe with our products.

As we have tried to explain, your pictures and explanations are no substitution for hands on examination.  If you want us to diagnose and fix your issue, we would be happy to.

Answered, again.  Please allow us to inspect the rifle to see the issue you are having, so we can accurately fix the problem.