User Panel
User Panel
User Panel
|
Posted: 4/23/2014 10:15:20 PM EDT
[#1]
They're no longer making the Colt N1 Fiberlite CAR stocks, original new ones are very expensive now about two hundred bucks if I remember correctly.
Sometimes they show up at the EE at a good price but you've got to be fast to get it, they're gone fast. |
|
|
|
Posted: 4/25/2014 8:01:28 PM EDT
[#2]
When I sold mine I had a hard time getting $35 each.
I don't miss them at all. |
|
|
|
Posted: 4/30/2014 7:42:31 PM EDT
[#3]
Doesn't M&A parts make a version of them?
|
|
|
|
Posted: 4/30/2014 9:45:58 PM EDT
[#4]
Quote HistoryQuoted:
Doesn't M&A parts make a version of them? Yes but they aren't colt 
|
|
|
|
Posted: 5/1/2014 4:56:04 PM EDT
[#5]
Quote HistoryQuoted:
When I sold mine I had a hard time getting $35 each. I don't miss them at all. When I bought all mine, the going rate was about $5 used, $15 new - maybe. 
People used to give 'em out as "free gifts" for buying stuff in their EE ads - bet some of those folks wish they'd've held on to 'em when the market changed.
I've honestly and frankly been a little shocked at the prices they're going for... I like mine, and don't intend to part with any any time soon, but damn, certainly not worth north of $75-80 for a stock body alone! Then again, a clone's a clone... I've also got two complete, relatively good condition vinyl acetate covered aluminum XM177E2/SP1 Carbine stocks, those go for a pretty penny these days, too! ~Augee |
|
|
|
Posted: 5/2/2014 1:28:02 AM EDT
[#6]
Quote HistoryQuoted:
When I bought all mine, the going rate was about $5 used, $15 new - maybe.
People used to give 'em out as "free gifts" for buying stuff in their EE ads - bet some of those folks wish they'd've held on to 'em when the market changed.
I've honestly and frankly been a little shocked at the prices they're going for... I like mine, and don't intend to part with any any time soon, but damn, certainly not worth north of $75-80 for a stock body alone! Then again, a clone's a clone... I've also got two complete, relatively good condition vinyl acetate covered aluminum XM177E2/SP1 Carbine stocks, those go for a pretty penny these days, too! ~Augee Quote HistoryQuoted:
Quoted:
When I sold mine I had a hard time getting $35 each. I don't miss them at all. When I bought all mine, the going rate was about $5 used, $15 new - maybe.
People used to give 'em out as "free gifts" for buying stuff in their EE ads - bet some of those folks wish they'd've held on to 'em when the market changed.
I've honestly and frankly been a little shocked at the prices they're going for... I like mine, and don't intend to part with any any time soon, but damn, certainly not worth north of $75-80 for a stock body alone! Then again, a clone's a clone... I've also got two complete, relatively good condition vinyl acetate covered aluminum XM177E2/SP1 Carbine stocks, those go for a pretty penny these days, too! ~Augee I'd love to build my 6933 into a XM177 type clone. But all the parts are now very hard to find and expensive. Back when I first joined ARFCOM way back, everyone was building M4gerys and ditching the slick side uppers and A1s's for dirt cheap. Same with the stocks. Now that I want to get those parts, I always miss the good deals.. And the A2 stuff is getting the same way.. |
|
|
|
Posted: 5/2/2014 3:01:52 PM EDT
[#7]
I have been "stock" piling them.
|
|
|
|
Posted: 5/4/2014 7:42:54 PM EDT
[#8]
whats the difference between one marked "N1" and one just marked "N" ?
I have several "N" marked ones from years ago,got them when I bought a couple M4 14.5" barrels |
|
|
|
Posted: 5/6/2014 9:04:08 AM EDT
[#9]
yes,People used to give 'em out as "free gifts" for buying stuff in their EE ads - bet some of those folks wish they'd've held on to 'em when the market changed
|
|
|
|
Posted: 5/10/2014 8:56:10 PM EDT
[#10]
Quote HistoryQuoted:
whats the difference between one marked "N1" and one just marked "N" ? I have several "N" marked ones from years ago,got them when I bought a couple M4 14.5" barrels I always thought mine had only an "N" or a "1" (can't recall which comes first on the stock itself). Finally I found whichever one I was missing under the front of the stock adjustment lever but you really have to pull. Not saying you're wrong about yours, just saying your numeric might be hiding on you - the "N1" isn't together. |
|
|
|
Posted: 5/12/2014 10:03:09 PM EDT
[#11]
Quote HistoryQuoted: I always thought mine had only an "N" or a "1" (can't recall which comes first on the stock itself). Finally I found whichever one I was missing under the front of the stock adjustment lever but you really have to pull. Not saying you're wrong about yours, just saying your numeric might be hiding on you - the "N1" isn't together. Quote HistoryQuoted: Quoted: whats the difference between one marked "N1" and one just marked "N" ? I have several "N" marked ones from years ago,got them when I bought a couple M4 14.5" barrels I always thought mine had only an "N" or a "1" (can't recall which comes first on the stock itself). Finally I found whichever one I was missing under the front of the stock adjustment lever but you really have to pull. Not saying you're wrong about yours, just saying your numeric might be hiding on you - the "N1" isn't together. |
|
|
|
Posted: 5/12/2014 10:29:47 PM EDT
[#12]
Quote HistoryQuoted:
I have been "stock" piling them. Share the wealth buddy
|
|
|
|
Posted: 6/1/2014 6:52:53 PM EDT
[#13]
I have 2 , keep an eye out at gunshows , my last one I got for 10 bucks. The other came with my sp2 carbine.
|
|
|
|
Posted: 6/25/2014 7:56:20 PM EDT
[#14]
I used to sale them for $35 each. but then again i also sold New in foil wrap SP1/M16 barrels for $150 each and had a bunch of the early gas tubes for $3 each
|
|
|
|
Posted: 6/26/2014 1:21:30 AM EDT
[#15]
Keep a close eye on the "junk" boxes at gun shows and gun shops. This is where I keep finding them, usually give $5-$20 each.
|
|
|
|
Posted: 7/13/2014 11:58:22 PM EDT
[#16]
Funny, I have one on my 6920 that I want to get rid of for a MagPul CTR but I didn't think I would be able to sell it for more than $5. Maybe I can sell it afterall.
|
|
|
|
Posted: 7/14/2014 2:22:12 AM EDT
[#17]
Quote HistoryQuoted:
Funny, I have one on my 6920 that I want to get rid of for a MagPul CTR but I didn't think I would be able to sell it for more than $5. Maybe I can sell it afterall. You could more than likely pay for the CTR with what the N1s are going for right now. They are neat stocks. The only thing I would put one on, is a 6933 when I eventually get one. That, and an original Colt A1 Grip. |
|
|
|
Posted: 9/5/2014 10:39:40 PM EDT
[#18]
Quote HistoryQuoted:
Funny, I have one on my 6920 that I want to get rid of for a MagPul CTR but I didn't think I would be able to sell it for more than $5. Maybe I can sell it afterall. I'm sure you won't have a problem. I've been trying to find one for weeks to replace the cracked one on my older 6520 and have had no luck this far. Darn retro clone guys are buying them all up and all I want is an original OEM correct stock for my rifle...... |
|
|
|
Posted: 9/6/2014 12:09:08 AM EDT
[#19]
Quote HistoryQuoted:
I'm sure you won't have a problem. I've been trying to find one for weeks to replace the cracked one on my older 6520 and have had no luck this far. Darn retro clone guys are buying them all up and all I want is an original OEM correct stock for my rifle...... Quote HistoryQuoted:
Quoted:
Funny, I have one on my 6920 that I want to get rid of for a MagPul CTR but I didn't think I would be able to sell it for more than $5. Maybe I can sell it afterall. I'm sure you won't have a problem. I've been trying to find one for weeks to replace the cracked one on my older 6520 and have had no luck this far. Darn retro clone guys are buying them all up and all I want is an original OEM correct stock for my rifle...... I have gotten 3 "N" marked colt stocks in the last couple of months off the EE. All 3 in like new condition. You have to be decisive and frequent the EE often. as a matter of fact i got the third one a couple of days ago. |
|
|
|
Posted: 9/6/2014 1:51:08 AM EDT
[#20]
Quote HistoryQuoted:
I have gotten 3 "N" marked colt stocks in the last couple of months off the EE. All 3 in like new condition. You have to be decisive and frequent the EE often. as a matter of fact i got the third one a couple of days ago. Quote HistoryQuoted:
Quoted:
Quoted:
Funny, I have one on my 6920 that I want to get rid of for a MagPul CTR but I didn't think I would be able to sell it for more than $5. Maybe I can sell it afterall. I'm sure you won't have a problem. I've been trying to find one for weeks to replace the cracked one on my older 6520 and have had no luck this far. Darn retro clone guys are buying them all up and all I want is an original OEM correct stock for my rifle...... I have gotten 3 "N" marked colt stocks in the last couple of months off the EE. All 3 in like new condition. You have to be decisive and frequent the EE often. as a matter of fact i got the third one a couple of days ago. I search every day but lately can't get online but once or twice a day in the evenings. Never catch any, and the one I came across once was absolutely beat to hell. I guess I'll keep looking... |
|
|
|
Posted: 9/7/2014 10:31:10 AM EDT
[#21]
Quote HistoryQuoted:
I always thought mine had only an "N" or a "1" (can't recall which comes first on the stock itself). Finally I found whichever one I was missing under the front of the stock adjustment lever but you really have to pull. Not saying you're wrong about yours, just saying your numeric might be hiding on you - the "N1" isn't together. Quote HistoryQuoted:
Quoted:
whats the difference between one marked "N1" and one just marked "N" ? I have several "N" marked ones from years ago,got them when I bought a couple M4 14.5" barrels I always thought mine had only an "N" or a "1" (can't recall which comes first on the stock itself). Finally I found whichever one I was missing under the front of the stock adjustment lever but you really have to pull. Not saying you're wrong about yours, just saying your numeric might be hiding on you - the "N1" isn't together. Ditto, they characters are not side by side. But seperated by the release lever. |
|
|
|
Posted: 11/6/2014 11:18:52 AM EDT
[#22]
There are a couple of ads on the EE selling N1 marked colt stocks under the used lower receiver parts forum in the EE. I already have 5 fiberlites and 2 aluminum ones so im fully "stocked"
come to think of it I have spent over $1k in stocks alone 
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
