User Panel
Quoted:
I've never had an Acog so I was just wondering what people prefer. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Which reticule do you guys like best? Green horseshoe of death? Get that so I'll still be the only one awesome enough for the red chevron of the gods Almost buddy. Almost. Red chevron of the gods checking in. I've never had an Acog so I was just wondering what people prefer. Tons of people like the green horseshoe. I tried Rusted's and while there wasn't anything wrong with it, I found it a little "busy" compared to the chevron. |
|
Quoted: Tons of people like the green horseshoe. I tried Rusted's and while there wasn't anything wrong with it, I found it a little "busy" compared to the chevron. View Quote View All Quotes View All Quotes Quoted: Quoted: Quoted: Quoted: Quoted: Which reticule do you guys like best? Green horseshoe of death? Get that so I'll still be the only one awesome enough for the red chevron of the gods Almost buddy. Almost. Red chevron of the gods checking in. I've never had an Acog so I was just wondering what people prefer. Tons of people like the green horseshoe. I tried Rusted's and while there wasn't anything wrong with it, I found it a little "busy" compared to the chevron. Gotcha. With the chevron do you zero where you put the "hat" on the head? That's how my buddy said they used them.
|
|
|
Quoted:
I saw this config being tested by Special Cola Forces, they called it a ROCWAR. Redundant Optics Cola Warrior AR. I didnt get to find out what roll pins they were running. http://i62.tinypic.com/11h9ezo.jpg View Quote I find it hard to believe Special Cola Forces would use Larue |
|
|
|
Quoted:
There is zero Larue on that. Please get your Tier 3 eyes replaced. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I find it hard to believe Special Cola Forces would use Larue There is zero Larue on that. Please get your Tier 3 eyes replaced. That RMR mount sure looks like Larue |
|
|
Quoted:
Trijicon. The Trijicon sits significantly lower than the Larue and actually has a notch where it sits over a hump on the optic , so if you bump it it doesnt unscrew your rear objective like the Larue does. View Quote View All Quotes View All Quotes Quoted:
Quoted:
That RMR mount sure looks like Larue Trijicon. The Trijicon sits significantly lower than the Larue and actually has a notch where it sits over a hump on the optic , so if you bump it it doesnt unscrew your rear objective like the Larue does. Ah. My bad. I need to find one of the in spec bobro mounts for my ta33. I noticed mine was way low when it arrived compared to the Cola Operator rifles I tried |
|
Quoted:
I saw this config being tested by Special Cola Forces, they called it a ROCWAR. Redundant Optics Cola Warrior AR. I didnt get to find out what roll pins they were running. http://i62.tinypic.com/11h9ezo.jpg View Quote Wow a ROCWAR in the wild! Did you get a chance to see if there are MPI markings on the buffer retainer pin? |
|
Quoted:
Get that so I'll still be the only onewe'll be awesome enough for the red chevron of the gods View Quote View All Quotes View All Quotes Quoted:
Quoted:
Which reticule do you guys like best? Green horseshoe of death? Get that so I'll still be the only onewe'll be awesome enough for the red chevron of the gods FIFU |
|
Quoted:
Almost buddy. Almost. Red chevron of the gods checking in. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Which reticule do you guys like best? Green horseshoe of death? Get that so I'll still be the only one awesome enough for the red chevron of the gods Almost buddy. Almost. Red chevron of the gods checking in. Green chevron is where it's at. |
|
The red doughnut of death reticle is CWAR acceptable and I found it to be accurate and fast.
|
|
|
Quoted:
okok. I really want the ALG Mlok rail. They are pretty light and feel good. but... IS IT CWAR spec? The 13" is back in stock. http://d1z9d9wmo9i928.cloudfront.net/media/catalog/product/cache/1/image/547x800/17f82f742ffe127f42dca9de82fb58b1/a/l/algmlok13_1.jpg https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/983708_450043825132686_1234742350132246807_n.jpg View Quote I like the new rail, looks good. |
|
Quoted:
Quoted:
okok. I really want the ALG Mlok rail. They are pretty light and feel good. but... IS IT CWAR spec? The 13" is back in stock. http://d1z9d9wmo9i928.cloudfront.net/media/catalog/product/cache/1/image/547x800/17f82f742ffe127f42dca9de82fb58b1/a/l/algmlok13_1.jpg https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/983708_450043825132686_1234742350132246807_n.jpg I like the new rail, looks good. This. The uppers from CW4 had ALG MLOKs on them. |
|
Quoted:
Quoted:
Quoted:
I find it hard to believe Special Cola Forces would use Larue There is zero Larue on that. Please get your Tier 3 eyes replaced. That RMR mount sure looks like Larue There's actually a whole thing with Ace and the LaRue ACOG/RMR mount. It's a real bard's song filled with dragons, demons, and epic butthurt. You should ask him about it sometime. In the meantime, absolutely do get those cybernetic eyes installed. The TNV/PVS-14 comes strongly recommended. |
|
Quoted:
This. The uppers from CW4 had ALG MLOKs on them. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
okok. I really want the ALG Mlok rail. They are pretty light and feel good. but... IS IT CWAR spec? The 13" is back in stock. http://d1z9d9wmo9i928.cloudfront.net/media/catalog/product/cache/1/image/547x800/17f82f742ffe127f42dca9de82fb58b1/a/l/algmlok13_1.jpg https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/983708_450043825132686_1234742350132246807_n.jpg I like the new rail, looks good. This. The uppers from CW4 had ALG MLOKs on them. Not quite. The women's upper had the purple ALG, but Superq7's has the 15" Mk8 SMR, which has not been released for sale yet. It has a full top rail and MLOK sides, whereas the ALG version has MLOK all around. Supposedly Oct-Nov timeframe, the Mk8 SMR will be available. Geissele is currently busy back-filling all their old rail orders that piled up during the move (word is, all old orders WILL be filled, no matter what type rail they are, unless you cancel to buy a newer model or something). The ALG MLOK product was a bit of a surprise. Not that they made it, but that they were able to make it substantially cheaper than the old version. The MLOK rail starts at $100 for a 10". Yeah, one bill for a lightweight free float modular tube. That's fuckin clownshoes crazytown. If you still own any non-freefloat ARs, you need to crawl out from under that rock. ETA: Pic thread, yo. And a little She-CWAR (sorta) |
|
"CWAR" you guys are awesome. we're moving south this year and i'm hoping once we get that settled out i'll be able to make it to one of these. |
|
Quoted:
There's actually a whole thing with Ace and the LaRue ACOG/RMR mount. It's a real bard's song filled with dragons, demons, and epic butthurt. You should ask him about it sometime. In the meantime, absolutely do get those cybernetic eyes installed. The TNV/PVS-14 comes strongly recommended. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
I find it hard to believe Special Cola Forces would use Larue There is zero Larue on that. Please get your Tier 3 eyes replaced. That RMR mount sure looks like Larue There's actually a whole thing with Ace and the LaRue ACOG/RMR mount. It's a real bard's song filled with dragons, demons, and epic butthurt. You should ask him about it sometime. In the meantime, absolutely do get those cybernetic eyes installed. The TNV/PVS-14 comes strongly recommended. Did he knock off the mount like a magic hat? |
|
Quoted:
Not quite. The women's upper had the purple ALG, but Superq7's has the 15" Mk8 SMR, which has not been released for sale yet. It has a full top rail and MLOK sides, whereas the ALG version has MLOK all around. Supposedly Oct-Nov timeframe, the Mk8 SMR will be available. Geissele is currently busy back-filling all their old rail orders that piled up during the move (word is, all old orders WILL be filled, no matter what type rail they are, unless you cancel to buy a newer model or something). The ALG MLOK product was a bit of a surprise. Not that they made it, but that they were able to make it substantially cheaper than the old version. The MLOK rail starts at $100 for a 10". Yeah, one bill for a lightweight free float modular tube. That's fuckin clownshoes crazytown. If you still own any non-freefloat ARs, you need to crawl out from under that rock. ETA: Pic thread, yo. http://i59.tinypic.com/289vbbs.jpg And a little She-CWAR (sorta) http://i60.tinypic.com/hvcu3m.jpg View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
okok. I really want the ALG Mlok rail. They are pretty light and feel good. but... IS IT CWAR spec? The 13" is back in stock. http://d1z9d9wmo9i928.cloudfront.net/media/catalog/product/cache/1/image/547x800/17f82f742ffe127f42dca9de82fb58b1/a/l/algmlok13_1.jpg https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/983708_450043825132686_1234742350132246807_n.jpg I like the new rail, looks good. This. The uppers from CW4 had ALG MLOKs on them. Not quite. The women's upper had the purple ALG, but Superq7's has the 15" Mk8 SMR, which has not been released for sale yet. It has a full top rail and MLOK sides, whereas the ALG version has MLOK all around. Supposedly Oct-Nov timeframe, the Mk8 SMR will be available. Geissele is currently busy back-filling all their old rail orders that piled up during the move (word is, all old orders WILL be filled, no matter what type rail they are, unless you cancel to buy a newer model or something). The ALG MLOK product was a bit of a surprise. Not that they made it, but that they were able to make it substantially cheaper than the old version. The MLOK rail starts at $100 for a 10". Yeah, one bill for a lightweight free float modular tube. That's fuckin clownshoes crazytown. If you still own any non-freefloat ARs, you need to crawl out from under that rock. ETA: Pic thread, yo. http://i59.tinypic.com/289vbbs.jpg And a little She-CWAR (sorta) http://i60.tinypic.com/hvcu3m.jpg I didn't get a good look at SuperQ7s upper. but that's badass. |
|
|
|
|
|
|
Quoted:
I've never had an Acog so I was just wondering what people prefer. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Which reticule do you guys like best? Green horseshoe of death? Get that so I'll still be the only one awesome enough for the red chevron of the gods Almost buddy. Almost. Red chevron of the gods checking in. I've never had an Acog so I was just wondering what people prefer. ELCAN |
|
|
|
Quoted:
I didn't get a good look at SuperQ7s upper. but that's badass. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
okok. I really want the ALG Mlok rail. They are pretty light and feel good. but... IS IT CWAR spec? The 13" is back in stock. http://d1z9d9wmo9i928.cloudfront.net/media/catalog/product/cache/1/image/547x800/17f82f742ffe127f42dca9de82fb58b1/a/l/algmlok13_1.jpg https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/983708_450043825132686_1234742350132246807_n.jpg I like the new rail, looks good. This. The uppers from CW4 had ALG MLOKs on them. Not quite. The women's upper had the purple ALG, but Superq7's has the 15" Mk8 SMR, which has not been released for sale yet. It has a full top rail and MLOK sides, whereas the ALG version has MLOK all around. Supposedly Oct-Nov timeframe, the Mk8 SMR will be available. Geissele is currently busy back-filling all their old rail orders that piled up during the move (word is, all old orders WILL be filled, no matter what type rail they are, unless you cancel to buy a newer model or something). The ALG MLOK product was a bit of a surprise. Not that they made it, but that they were able to make it substantially cheaper than the old version. The MLOK rail starts at $100 for a 10". Yeah, one bill for a lightweight free float modular tube. That's fuckin clownshoes crazytown. If you still own any non-freefloat ARs, you need to crawl out from under that rock. ETA: Pic thread, yo. http://i59.tinypic.com/289vbbs.jpg And a little She-CWAR (sorta) http://i60.tinypic.com/hvcu3m.jpg I didn't get a good look at SuperQ7s upper. but that's badass. I am at a wedding this week, next week I will have it built and posted. Yeah the mk8 is badass. |
|
View Quote should have tossed on a whoreface while you were at it |
|
Quoted:
should have tossed on a whoreface while you were at it View Quote View All Quotes View All Quotes Quoted:
should have tossed on a whoreface while you were at it Good to have you back, pistol. |
|
|
|
Trojan, that light placement isn't spec, pal. Support hand goes down, trigger finger light manipulation, drive the inforce.
I want a SBR. |
|
Quoted:
Trojan, that light placement isn't spec, pal. Support hand goes down, trigger finger light manipulation, drive the inforce. I want a SBR. View Quote It was bumping into the bench mounted at 9:00 so I just did that to weigh it. Send in your check, bro. Fuck your privacy, FEMA already knows where you are from the tracking nanobots injected in the swamp. Might as well have a cool toy |
|
Quoted:
I'm not going to tell you what to do... But... http://i57.tinypic.com/2ujjzt5.jpg http://i62.tinypic.com/2z4iwew.jpg View Quote View All Quotes View All Quotes Quoted:
I'm not going to tell you what to do... But... http://i57.tinypic.com/2ujjzt5.jpg http://i62.tinypic.com/2z4iwew.jpg Lol. When I eventually make it back to the states. I miss holding freedom a little. |
|
Quoted: The ALG MLOK product was a bit of a surprise. Not that they made it, but that they were able to make it substantially cheaper than the old version. The MLOK rail starts at $100 for a 10". Yeah, one bill for a lightweight free float modular tube. That's fuckin clownshoes crazytown. View Quote HOW IN THE WORLD ARE THOSE ONLY 100$????? Shoulda waited a few days before ordering. Oh well, Im happy with my regular old ALG rail. |
|
Quoted: HOW IN THE WORLD ARE THOSE ONLY 100$????? View Quote View All Quotes View All Quotes Quoted: Quoted: The ALG MLOK product was a bit of a surprise. Not that they made it, but that they were able to make it substantially cheaper than the old version. The MLOK rail starts at $100 for a 10". Yeah, one bill for a lightweight free float modular tube. That's fuckin clownshoes crazytown. HOW IN THE WORLD ARE THOSE ONLY 100$????? Shoulda waited a few days before ordering. Oh well, Im happy with my regular old ALG rail. guess they are getting my money then. I mean, if its cyborg approved... |
|
Quoted:
HOW IN THE WORLD ARE THOSE ONLY 100$????? Shoulda waited a few days before ordering. Oh well, Im happy with my regular old ALG rail. View Quote View All Quotes View All Quotes Quoted:
Quoted:
The ALG MLOK product was a bit of a surprise. Not that they made it, but that they were able to make it substantially cheaper than the old version. The MLOK rail starts at $100 for a 10". Yeah, one bill for a lightweight free float modular tube. That's fuckin clownshoes crazytown. HOW IN THE WORLD ARE THOSE ONLY 100$????? Shoulda waited a few days before ordering. Oh well, Im happy with my regular old ALG rail. Yeah, how indeed. Thanks to YOU I'm now planning to build a CWAR-spec pea shooter. |
|
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Which reticule do you guys like best? Green horseshoe of death? Get that so I'll still be the only one awesome enough for the red chevron of the gods Almost buddy. Almost. Red chevron of the gods checking in. I've never had an Acog so I was just wondering what people prefer. ELCAN Not even this Canadian would run an ELCAN. Well, maybe the Specter DR. |
|
Quoted:
Lol. When I eventually make it back to the states. I miss holding freedom a little. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I'm not going to tell you what to do... But... http://i57.tinypic.com/2ujjzt5.jpg http://i62.tinypic.com/2z4iwew.jpg Lol. When I eventually make it back to the states. I miss holding freedom a little. I dunno bro. I saw a pic somewhere of a random guy holding a stick of dynamite |
|
Quoted:
I dunno bro. I saw a pic somewhere of a random guy holding a stick of dynamite View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
I'm not going to tell you what to do... But... http://i57.tinypic.com/2ujjzt5.jpg http://i62.tinypic.com/2z4iwew.jpg Lol. When I eventually make it back to the states. I miss holding freedom a little. I dunno bro. I saw a pic somewhere of a random guy holding a stick of dynamite I wonder if it was CWAR spec dynamite. |
|
Quoted:
I wonder if it was CWAR spec dynamite. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
I'm not going to tell you what to do... But... http://i57.tinypic.com/2ujjzt5.jpg http://i62.tinypic.com/2z4iwew.jpg Lol. When I eventually make it back to the states. I miss holding freedom a little. I dunno bro. I saw a pic somewhere of a random guy holding a stick of dynamite I wonder if it was CWAR spec dynamite. All dynamite is CW spec |
|
Quoted:
HOW IN THE WORLD ARE THOSE ONLY 100$????? View Quote Sure, you can just say, well, it's very minimal machining. You've got two different extrusions, and only a minimum of processes, plus some off the shelf hardware, but $100 is still insane. Given markup, taxes, and everything, and considering the commercial value of machine time, I figure they're making these with about 10 minutes of machine time or less. Possibly much less. That's a triumph of design, right there. That's industry-changing stuff. FWIW, they were put up on the website yesterday, and they're apparently very limited quantities right now. The 12" is already sold out. If you want a 10" or 13", you'd better buy soon. http://algdefense.com/rails.html ETA: They are making up a bit of money on the rail sections, which are $20 each and sold separately. |
|
Quoted:
http://www.blogcdn.com/massively.joystiq.com/media/2007/11/secret-to-everybody_400x350.shkl.jpg Sure, you can just say, well, it's very minimal machining. You've got two different extrusions, and only a minimum of processes, plus some off the shelf hardware, but $100 is still insane. Given markup, taxes, and everything, and considering the commercial value of machine time, I figure they're making these with about 10 minutes of machine time or less. Possibly much less. That's a triumph of design, right there. That's industry-changing stuff. FWIW, they were put up on the website yesterday, and they're apparently very limited quantities right now. The 12" is already sold out. If you want a 10" or 13", you'd better buy soon. http://algdefense.com/rails.html ETA: They are making up a bit of money on the rail sections, which are $20 each and sold separately. View Quote View All Quotes View All Quotes Quoted:
Quoted:
HOW IN THE WORLD ARE THOSE ONLY 100$????? http://www.blogcdn.com/massively.joystiq.com/media/2007/11/secret-to-everybody_400x350.shkl.jpg Sure, you can just say, well, it's very minimal machining. You've got two different extrusions, and only a minimum of processes, plus some off the shelf hardware, but $100 is still insane. Given markup, taxes, and everything, and considering the commercial value of machine time, I figure they're making these with about 10 minutes of machine time or less. Possibly much less. That's a triumph of design, right there. That's industry-changing stuff. FWIW, they were put up on the website yesterday, and they're apparently very limited quantities right now. The 12" is already sold out. If you want a 10" or 13", you'd better buy soon. http://algdefense.com/rails.html ETA: They are making up a bit of money on the rail sections, which are $20 each and sold separately. Is there an Mk number for a CWAR with an ALG Defense rail? |
|
Quoted:
Not even this Canadian would run an ELCAN. Well, maybe the Specter DR. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
... Get that so I'll still be the only one awesome enough for the red chevron of the gods Almost buddy. Almost. Red chevron of the gods checking in. I've never had an Acog so I was just wondering what people prefer. ELCAN Not even this Canadian would run an ELCAN. Well, maybe the Specter DR. You're not helping. I was hoping for a foreign spec CWAR. Actually, I still maintain the the original 3.4x ELCAN is a superb optic, and is as good as the ACOG, and its simplicity lends itself well to a CWAR |
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.