User Panel
Posted: 5/22/2017 12:16:01 PM EDT
Might sound silly, but what would all say is a respectable weight? Talking about seated dumbbell presses, say 6-8 reps.
|
|
I have no idea what would be a respectable weight for seated dumbbell press. I can barely manage a seated barbell press of 40 lbs.
|
|
bodyweight for press is pretty good imho. I can't do that much but i'm weak.
|
|
|
Quoted:
So if you weigh 250lbs you should be able to press 125lb dumbbells? View Quote View All Quotes View All Quotes |
|
|
Quoted:
Kind of what I was thinking. Most of the stronger guys I see in the gym are using between 60-100lb dumbbells for shoulder, incline, and flat presses. With the higher weight being used for flat bench. View Quote View All Quotes View All Quotes |
|
First of all do them standing or you're cheating yourself. Second, check out shoulder rehab workouts on BodyBuilding.com before you go too heavy, there are a few small muscles that you need to strengthen before you can handle heavy weight. Also, it will help your max bench. Whats respectable only matters to you and only you, so log all workouts.
|
|
|
Quoted:
First of all do them standing or you're cheating yourself. Second, check out shoulder rehab workouts on BodyBuilding.com before you go too heavy, there are a few small muscles that you need to strengthen before you can handle heavy weight. Also, it will help your max bench. Whats respectable only matters to you and only you, so log all workouts. View Quote |
|
Quoted:
6-8 reps of that is 'way past "respectable" in my book. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
bodyweight for press is pretty good imho. I can't do that much but i'm weak. On a forum where the average height is 6ft4, the average bench 350 for 10 without even a belt, and all their $80,000 vehicles were paid off in cash? A mere 200lb overhead press of any sort is quite simply pedestrian. I have a ton of shitty lifts and I'm a shitty athlete, but it's my favorite lift. 250lbs for 2 is my best (I'm 225) Standing overhead That lift is hard, and easy to hurt yourself on imho. for me, 90s are spicy on that lift. 125lb dumbells, 6 to 8 reps? That would be a wild thing to see. Unheard of no, but heck the "would captian back-achne over there pass a piss test? What supplement do you think he's taking to get his skin all nice and thin like that" question(s) would float around. Quoted:
First of all do them standing or you're cheating yourself. Second, check out shoulder rehab workouts on BodyBuilding.com before you go too heavy, there are a few small muscles that you need to strengthen before you can handle heavy weight. Also, it will help your max bench. Whats respectable only matters to you and only you, so log all workouts. Stretch out your core a bit too, you'll need those to work when the heavy stuff gets over your head. Since doing that I haven't had major or minor "gym ouchie" from my favorite lift. As much as I enjoy going heavy, the lift seems to reward good form and activation of all the muscles, as well as volume of training - more than chasing a number. I say that as someone who did chase numbers. |
|
Quoted:
How so? I would think sitting with your back against the seat would help keep proper form. Maybe I'm wrong. View Quote View All Quotes View All Quotes Quoted:
Quoted:
First of all do them standing or you're cheating yourself. Second, check out shoulder rehab workouts on BodyBuilding.com before you go too heavy, there are a few small muscles that you need to strengthen before you can handle heavy weight. Also, it will help your max bench. Whats respectable only matters to you and only you, so log all workouts. You can also sit on the floor and press, which is even more difficult. But that's an entirely different thing. |
|
Quoted:
Standing is more difficult because you don't have a stable surface bracing you. When standing, you make your own brace using your core, your glutes, your upper back muscles. That makes it generally more beneficial. But sitting is also sometimes good because you can load on more weight and put a little more pressure on your shoulders. You can also sit on the floor and press, which is even more difficult. But that's an entirely different thing. View Quote |
|
Quoted:
Again, kind of what I was thinking. Using dumbbells engages all those secondary muscles, true? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Hell, strict shoulder pressing 60# 6-8 times is respectable IMO. By the way, you can't equate the weight of dumbbells w/ the same weight on a barbell. Dumbbells are harder. Try an Arnold press instead. If done properly, they will engage all three heads of the delts. |
|
Quoted:
Not necessarily on a strict dumbbell press. I agree that dumbbell presses are harder than with a barbell, but they still don't always target the entire deltoid. Try an Arnold press instead. If done properly, they will engage all three heads of the delts. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Hell, strict shoulder pressing 60# 6-8 times is respectable IMO. By the way, you can't equate the weight of dumbbells w/ the same weight on a barbell. Dumbbells are harder. Try an Arnold press instead. If done properly, they will engage all three heads of the delts. |
|
Today's workout routine, I'm training a friend of mine. We do the same routine but he does lighter weight. Started with back, I won't explain that since we're talking shoulders which I followed up with after. Three sets of Arnold presses seated, 35, 55 and then 65 lbs. dumbells, three sets of barbell raises on an incline bench, 50, 70 and then 90 lbs. side deltoid barbell raise each shoulder independently. 40, 30, 25 and then 20 lbs. Rear deltoids on the pec deck machine, alternating with rope pulls for the final sets.
|
|
Today for me was chest/shoulders/traps. Be gentle, I've only been lifting for a few months. All were 3 sets 6-8 reps per set:
Bench 135 155 155 ISO incline press 90 each arm(one of those machines you can do chest on one side and lat pull downs on the other) Incline dumbbell press 50 60 65 ISO shoulder press 140(its at an incline but I lay against the seat with my stomach instead of my back. Doesn't hurt my shoulders that way) Seated dumbbell press 55 Front raises with a 25lb weight but go all the way up to hit my lower traps as well Shrugs on smith machine 185 Dumbbell shrugs 65 Pulldowns 120 |
|
Quoted:
Again, kind of what I was thinking. Using dumbbells engages all those secondary muscles, true? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Hell, strict shoulder pressing 60# 6-8 times is respectable IMO. By the way, you can't equate the weight of dumbbells w/ the same weight on a barbell. Dumbbells are harder. As far as weight, no idea. If you can BB press your body weight I would say you are doing just fine. I can't OHP my bodyweight, hopefully some day. |
|
Quoted:
Standing is more difficult because you don't have a stable surface bracing you. When standing, you make your own brace using your core, your glutes, your upper back muscles. That makes it generally more beneficial. But sitting is also sometimes good because you can load on more weight and put a little more pressure on your shoulders. You can also sit on the floor and press, which is even more difficult. But that's an entirely different thing. View Quote I do them seated on the flat bench, unracking is annoying like that. |
|
Quoted:
I wish I could do them standing, the ceilings in the basement are too low. I do them seated on the flat bench, unracking is annoying like that. View Quote |
|
"How To" OVERHEAD PRESS |
|
Quoted:
Today for me was chest/shoulders/traps. Be gentle, I've only been lifting for a few months. All were 3 sets 6-8 reps per set: Bench 135 155 155 ISO incline press 90 each arm(one of those machines you can do chest on one side and lat pull downs on the other) Incline dumbbell press 50 60 65 ISO shoulder press 140(its at an incline but I lay against the seat with my stomach instead of my back. Doesn't hurt my shoulders that way) Seated dumbbell press 55 Front raises with a 25lb weight but go all the way up to hit my lower traps as well Shrugs on smith machine 185 Dumbbell shrugs 65 Pulldowns 120 View Quote I've been using a hex bar for them and enjoy it over a straight bar. Also, don't worry about your lift numbers, we have all been there, keep progressing! |
|
Quoted:
How do you like shrugs on the smith machine? I've been using a hex bar for them and enjoy it over a straight bar. Also, don't worry about your lift numbers, we have all been there, keep progressing! View Quote |
|
Yesterday, I pressed (standing, strict overhead press with a barbell) 200 x 7, which ties a PR. BW = 200. I finished with a set of 155 x 17 which is a 3 rep PR.
I seriously doubt I could press 7 reps with 100# dumbbells. I'm not sure I could even get 1 rep with DBs. The closest I own are 95# dumbbells so I will try it in the near future. Getting the DBs into the rack position would be difficult. I've done 70# DB presses for 3 x 10 at a hotel before, with the last set for 12 AMRAP. Getting close to a 75# DB press for 17 reps seems like an outside chance, if I am really fresh. I own 75# dumbbells but not 80#. I'll give this a try in the near future too, just to experiment. |
|
Scrolling through YouTube yesterday I ran across a video of James Harrison lifting. He was doing standing presses with 95-100lb dumbbells. If I can get up to seated presses with 75lb I think I'm doing alright
|
|
Quoted:
Scrolling through YouTube yesterday I ran across a video of James Harrison lifting. He was doing standing presses with 95-100lb dumbbells. If I can get up to seated presses with 75lb I think I'm doing alright View Quote |
|
|
Quoted:
Quoted:
Standing is more difficult because you don't have a stable surface bracing you. When standing, you make your own brace using your core, your glutes, your upper back muscles. That makes it generally more beneficial. But sitting is also sometimes good because you can load on more weight and put a little more pressure on your shoulders. You can also sit on the floor and press, which is even more difficult. But that's an entirely different thing. Little muscles all the way to your toes. Note: I am performance training not body building |
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.