BCM upper receiver
Daniel Defense 12.5" CHF 5.56mm barrel w/ factory pinned low-pro gas block
Griffin Armament Tactical Compensator w/ tabbed washer
Spikes melonited carbine length gas tube.
BCM KMR 10" handguard (need panels yet)
BCM Keymod Sling Mount
Spikes complete BCG
BCM Mod4 Charging Handle
Daniel Defense front BUIS
Troy rear BUIS
Surefire X300U-A (will be adding a Unity Tactical EXO)
Trijicon TA33G-H ACOG w/ Larue mount *or* Aimpoint CompM4 w/ Bobro mount (ACOG on it for now as it is lighter than the Aimpoint)
Blue Force Gear VCAS sling w/ aluminum adjuster

8lb 8oz including 6 CR123A's, spare bolt, spare firing pin, spare gas key, spare gas rings, and a loaded 20rd PMAG w/ 75gr Hornady TAP FPD ammunition.

Griffin M4SD II is on order at Silencer Shop so I will have that in 9-10 months

I'm more interested in your Hornady TAP than anything else in this picture.

I'll play.

Sorry, but the picture above you cancels out any information that you want to convey.

plouffedaddy...how was the upper and lower done in multi cam ..dipped, purchased already painted ?

I think it's Kryptek Highlander

Correct; by Black Forge.   It's a factory set they offer.

The stock is a SOPMOD Bravo in multicam though.

Sorry if this question has already been answered but, how does the KMR fit on a Vltor upper...any problems with fit on this upper?

Vey nice plouffedaddy ! IMHO nicest one so far. Would like to see it with the KMR also done in the kryptek highlander pattern.

Perfectly fine with a 2014 MUR-1A.

http://www.ocabj.net/16-mid-length-ar-15-keymod-build-report/

I hope to see some 15" KMRs soon since they sold out so fast.

Hopefully by Sat

I knew you would snag one.

 

They sold out really quickly....and remembering last year when they had KMR 14.5 uppers listed and had that computer glitch
that sent out confirmation emails and charged cards...followed by phone calls telling us the bad news....

I am not celebrating just yet....still waiting for the shipping notification.....

Got my notification from UPS with a tracking number so....yee ha!


KMR15 Back in Stock KMR9 now in stock

& OOS Again

How about pre 2014 Vltor MUR 1A uppers...will all previous production vltor uppers work without fit issues with the KMR.

BCM Upper cerakoted Burnt Bronze
BCM 11.5" BFH Barrel
BCM 10" KMR cerakoted Burnt Bronze
Noveske/Vltor Mod 4 Charging Handle
Aim Surplus BCG
Spikes Honey Badger Lower cerakoted Burnt Bronze
DPMS Lower Build kit
Magpul Trigger guard
Geissele SSA
Magpul MOE-K2
KAK Super Tub + small spacer
Sig Brace
Tactical Springs Extra Power Spring from Larue
H2 Buffer
Larue LT660
Aimpoint T-1

About to swap the a2 flash hider out and put some Phase 5 straps on. Gonna order tomorrow with their discount.

Not the best pics of the color, but it's your typical burnt bronze. Looks better in bigger pictures.

Don't know about that Noveske version of the VLTOR. I know that one won't work with a Geissele SMR. My 2013 MUR-1A does work with the Geissele.

I think that what is referred to as Noveske/Vltor in the above post is a charging handle and I was asking about the Vltor MUR 1A upper receiver fit to the KMR handrail.

Well, I put the KMR on my VLTOR MUR-1A which is a 2014 model. The 2013 model *looks* like the 2014 (I have a 2013 with a Geissele SMR).

Any pics of a 10" KMR on a 10.5 inch barrel?

I'm really considering one for my current build

Thats what im wanting to see too

Not a super closeup of the muzzle, but hope it helps.

More pics on my Kryptek paint thread.  And my avatar shows it before it was painted.

Perfect, thank you.  I'm planning on running a KAK flash can on mine and wanted to be sure I'd have the room to tighten it down.  The next choice was a claymore though lol

taggage

They're from my shtf pile.

Back in December 2012, SAW Sales listed a Colt "LE6991" on their website, which is what they called a Colt 9mm AR SBR with a 10" barrel.  It looks exactly like the Colt SMG, except without the "giggle switch."  So I ordered it and proceeded to mod it.  Here is how she looked recently, although I had since added a Magpul VFG and moved the light to the opposite side.



After a stupidly long wait, the suppressor I wanted for this gun finally arrived, the Gemtech Mk-9k.  Now, I know I won't get any sympathy whining about the 13 month wait for this suppressor, but as an SOT, I really should have had it August 2013, not July 2014.

During this time, Keymod rails were starting to appear and gain in popularity.  I thought that a 10" Keymod rail would look pretty good on my 9mm SBR, so I had plans to buy one to replace the CASV-ELG you see above ( FOR SALE IN THE EE.  My concern was how long the rail could be and still fit the suppressor.  The Mk-9k is a FAT suppressor at 2" in diameter.  So it was never going to fit under a rail.  But my hope was that the trilug mount would fit under the rail and a 10" rail on a 10" barrel would leave enough room to make it all work.

What that meant was that I couldn't buy a rail until I had the Mk-9k in hand, and I could take some measurements.  Well, today was the day that the suppressor arrived, and I didn't want to waste any more time finding a new rail!  So I did my research today and bought locally (Thanks Rainier Arms for being local!)

The rail I selected was the BCM KMR 10" rail.  Installation was fairly easy, especially with the right tools.  I'm pretty impressed with the way they designed the rail.  I have read some concerns about the durability of the finish.  Well, I will see.  Nothing a rattlecan can't fix.....

A 10" barrel with a Gemtech trilug adapter with the 10" BCM KMR rail:


Note the very little bit that extends past the rail.

Now here is where things get "snugly", mounting the Mk-9k.  The ID of the rail is barely larger than the OD of the trilug mount on the Mk-9k.

Close up of the end of the rail and the Mk-9k:


So snugly in fact that the knurled portion of the trilug mount was just a shade too large to fit under rail.  I thought this may be the case, so I was prepared for what had to happen.  I took a file to the knurled portion of the mount and smoothed it down just enough to fit under the rail.  You can see in the picture that the knurled ring is now silver, where it was once black.  That is not a choice that many would be willing to make.  But hey, I'm an SOT, so I can buy replacement parts at cost if i need to!

Now that the knurling has been knocked down enough, it fits under the rail just perfectly.


And how she looks as a "complete package":

AWESOME

Here it is, super tight with the KAK on it, but I like it!

BCM enhanced light weight fluted 14.5" with KMR 13

clean setup, Boss.

I really like this set up a lot.  I like it a lot.  Need to get some panels on it as the heat transfer, as is the case with all of my free float rails, is noticeable.  Not too big a deal, but gotta do it.

The rail to barrel nut lock up is great.  Rock solid.

Sorry for the crappy cell phone pics.

BCM RECCE ( Got my free BCG too!  )
BCM SS410 16" Mid Length Upper Receiver Group w/ BCM KMR 13" Handguard 1/8 Twist


Brownell's Alumihyde  





cp

Word on the street is the metal mixture used in the KMR does not conduct or transfer heat as well as aluminum rails. Is this true, if so, how much so by mag dumps? I don't see alot of 15inch KMRs are they out yet? I need it for 18 inch build of awesomeness.

Under the sun it gets as hot or cool as any rail out there, and indoors it stays cooler then the tube rails I have used like Daniel Defense.


 

Anyone cerakote one yet? How did it fair?

Many people have and it holds up very well.


 

 

Here's mine, 13.5" on 16" barrel, nothing too fancy. Love the KMR for sure!

Can I get details on this pistol build? I assume KMR 10? What length barrel? Thanks.

Top Rifle:
BCM upper receiver
Daniel Defense 12.5" CHF 5.56mm barrel w/ factory pinned low-pro gas block
Griffin Armament Tactical Compensator w/ tabbed washer
Spikes melonited carbine length gas tube.
BCM KMR 10" handguard w/ KAC Panel Kit
BCM Keymod Sling Mount
Spikes Tactical BCG
BCM Mod4 Charging Handle
Daniel Defense front BUIS
Troy rear BUIS
Surefire X300U-A (will be adding a Unity Tactical EXO)
Vltor EMOD Stock
Trijicon TA33G-H ACOG w/ Larue mount *or* Aimpoint CompM4 w/ Bobro mount (ACOG on it for now as it is lighter than the Aimpoint)
Blue Force Gear VCAS sling w/ aluminum adjuster

****9lb 0oz including 8 CR123A's, spare bolt, spare firing pin, spare gas key, spare gas rings, and a loaded 20rd PMAG w/ 75gr Hornady TAP FPD ammunition****

Bottom Rifle:
BCM complete upper receiver w/ standard 11.5" CHF 5.56mm barrel and A2 flash hider (will change out to either the Griffin Comp or Vltor A2 when the suppressor comes in)
BCM KMR 10" handguard (need panels if BCM ever releases them)
BCM Keymod Sling Mount
Spikes complete BCG
BCM Mod4 Charging Handle
Daniel Defense front BUIS
Troy rear BUIS
Surefire X300 (will be adding a Unity Tactical EXO)
Vltor IMOD Clubfoot Stock
Aimpoint CompM4 w/ Bobro mount
Blue Force Gear VCAS sling w/ aluminum adjuster

****8lb 9oz including 6 CR123A's, spare bolt, spare firing pin, spare gas key, spare gas rings, and a loaded 20rd PMAG w/ 75gr Hornady TAP FPD ammunition****

Griffin M4SD II is on order at Silencer Shop so I will have that in 9-10 months

Damn!  What a Tack Driver!
BCM SS410 16" Mid Length Upper Receiver Group w/ BCM KMR 13" Handguard 1/8 Twist





200 yard line
cp

Shot of the BCM 11.5" LW upper I just got in. Swapped out the A2 right away for the AAC brake. Have a 762-SDN in jail. Haven't gotten the lower completed yet. The stamp came back way faster than I was expecting.

Your gun room must smell wonderful!

You have no idea