User Panel
[#1]
Originally Posted By zpduff: They are scumbags when you have four gen1 magazines, four gen2 magazines, two different 43x pistol and none of the mags will run reliably in either gun. Send them back, shield says everything is good, doesn't replace a thing. Then few months later comes out with a gen3. View Quote View All Quotes View All Quotes Originally Posted By zpduff: Originally Posted By sandboxmedic: Originally Posted By zpduff: Originally Posted By TNRonin: https://www.ar15.com/media/mediaFiles/13145/Screenshot_20240219_112431_Gmail_jpg-3134393.JPG I wonder if this is going to help shield arms? Maybe, not likely. I think those that have the shield arms system already, yes. But somebody like me who has heard bad stuff from people about these, and it's not it anecdotal, but actually somebody that's had a magazine dump on him, I'll not be using them. Especially when PSA comes out with the new magazine. That actually works! I hope PSA puts Shield Arms out of business, scumbag company I'm always hesitant to say that about firearms related companies, but their lawsuit is scumbaggery and as such i don't care what happens to them. Maybe they can go after Mauser, Beretta or some of the other companies that have been producing magazines for over a century next. They are scumbags when you have four gen1 magazines, four gen2 magazines, two different 43x pistol and none of the mags will run reliably in either gun. Send them back, shield says everything is good, doesn't replace a thing. Then few months later comes out with a gen3. People have pretty much confirmed that PSA has come out with a Gen 2 slick magazine with no mention for PSA about it. Not to mention the Black Magazine and the slick magazine coming out afterward. But they're still selling the black magazine. |
|
|
[#2]
Originally Posted By DavidY: People have pretty much confirmed that PSA has come out with a Gen 2 slick magazine with no mention for PSA about it. Not to mention the Black Magazine and the slick magazine coming out afterward. But they're still selling the black magazine. View Quote I don't understand this statement. Was there an issue with the PSA Gen 1 mags for the micro dagger? Or are they just improving and rolling the improvements. Which is common sense, as you can improve you do. It doesn't mean that the ones you have previously are bad. Unless I miss something. Which is highly likely. |
|
Shoot straight and tell the truth!
|
[#3]
I have early PSA mags and one slick one, u see no difference in function, they have worked 100% in both my 43x and my micro. I currently have more mags coming and will see if there's any difference
I also have half a dozen Shield mags and they have been between barely reliable and not reliable, several of them just fall out of the gun during recoil. Range toys at best |
|
I always thought the point of freedom and liberty was to avoid letting morons fuck up your life instead of their own?
ARFCOM is the Great Britain of the internet |
[#4]
Originally Posted By DavidY: People have pretty much confirmed that PSA has come out with a Gen 2 slick magazine with no mention for PSA about it. Not to mention the Black Magazine and the slick magazine coming out afterward. But they're still selling the black magazine. View Quote View All Quotes View All Quotes Originally Posted By DavidY: Originally Posted By zpduff: Originally Posted By sandboxmedic: Originally Posted By zpduff: Originally Posted By TNRonin: https://www.ar15.com/media/mediaFiles/13145/Screenshot_20240219_112431_Gmail_jpg-3134393.JPG I wonder if this is going to help shield arms? Maybe, not likely. I think those that have the shield arms system already, yes. But somebody like me who has heard bad stuff from people about these, and it's not it anecdotal, but actually somebody that's had a magazine dump on him, I'll not be using them. Especially when PSA comes out with the new magazine. That actually works! I hope PSA puts Shield Arms out of business, scumbag company I'm always hesitant to say that about firearms related companies, but their lawsuit is scumbaggery and as such i don't care what happens to them. Maybe they can go after Mauser, Beretta or some of the other companies that have been producing magazines for over a century next. They are scumbags when you have four gen1 magazines, four gen2 magazines, two different 43x pistol and none of the mags will run reliably in either gun. Send them back, shield says everything is good, doesn't replace a thing. Then few months later comes out with a gen3. People have pretty much confirmed that PSA has come out with a Gen 2 slick magazine with no mention for PSA about it. Not to mention the Black Magazine and the slick magazine coming out afterward. But they're still selling the black magazine. Well PSA mags actually work |
|
|
[#5]
Originally Posted By zpduff: Well PSA mags actually work View Quote For most people, but most people who use the shield arms magazines say they work also. Neither one are close to 100% reliable across the board. They might be 100% reliable for an individual, but that doesn't mean either one have been problem free. PSA has had to exchange many magazines and many users have disassembled them and cleared out the manufacturing defects on their own. |
|
|
[#6]
Originally Posted By DavidY: For most people, but most people who use the shield arms magazines say they work also. Neither one are close to 100% reliable across the board. They might be 100% reliable for an individual, but that doesn't mean either one have been problem free. PSA has had to exchange many magazines and many users have disassembled them and cleared out the manufacturing defects on their own. View Quote View All Quotes View All Quotes Originally Posted By DavidY: Originally Posted By zpduff: Well PSA mags actually work For most people, but most people who use the shield arms magazines say they work also. Neither one are close to 100% reliable across the board. They might be 100% reliable for an individual, but that doesn't mean either one have been problem free. PSA has had to exchange many magazines and many users have disassembled them and cleared out the manufacturing defects on their own. There were some issues with the mags when they first came out including flashing inside the magazine body and some tolerance issues and there are videos on youtube (including some by people who are supposedly gunsmiths, although I always take that claim by most with a grain of salt these days), that show these issues and how to remedy them. The most common in the latest iterations seem to be the front plastic jutting up just high enough to catch the rim of the shell as it feeds, feed lips seating too high causing slide drag and failing to engage the slide stop. Mine is back at PSA right now for this last issue; I think I know why and I may have been able to fix it myself but it is very frustrating. That said, I have no doubt PSA will resolve the issue. When I get the gun back I'll see what they say, I'll shoot it on their range to confirm that it's functioning properly then maybe do an AAR. |
|
|
[#7]
Joining the Micr Dagger club today, My frame arrived at my FFL!
I'm going to try a 43 slide on it and see how that does. |
|
|
[#8]
|
|
I always thought the point of freedom and liberty was to avoid letting morons fuck up your life instead of their own?
ARFCOM is the Great Britain of the internet |
[Last Edit: drobs]
[#9]
Originally Posted By zpduff: Magazines have been in stock all last week and all this week. https://palmettostatearmory.com/psa-dagger-micro-9mm-15-round-magazine.html View Quote View All Quotes View All Quotes Originally Posted By zpduff: Originally Posted By drobs: I could use a couple more PSA Micro Dagger mags but... out of stock. At least with Shield Arms - they have inventory. Yes their patent lawsuit is BS. Magazines have been in stock all last week and all this week. https://palmettostatearmory.com/psa-dagger-micro-9mm-15-round-magazine.html In stock on that link but out of stock on this link: https://palmettostatearmory.com/psa-dagger/magazines/micro.html That's annoying. |
|
|
[#10]
Originally Posted By cherenkov: Joining the Micr Dagger club today, My frame arrived at my FFL! I'm going to try a 43 slide on it and see how that does. View Quote I picked it up, slipped on an aftermarket cheap 43 slide I had for another project. It worked great! I loaded up several more times and shot 50 rds of CCI 124grain great. Trigger was spongy and heavier than I expected - I think it can be improved The slide slicked up a little after some shooting. Mag release is indeed harder than I'd like as others have said. For $99 can't go wrong!!!! I used RWB aftermakret 10 round mags that aslo worked well, one didn't drop free, but did pull out easy. These can get addicting for builds!!!!! |
|
|
[#11]
I got a frame and the black mag. I put on a Glock 43 top end. I shot 80rds of ball ammo, perfect function. I could only get 14 in the magazine but it doesn’t bother me. I have not followed these at all and took a leap of faith, glad it worked out.
|
|
|
[#12]
Originally Posted By wrhk33: I got a frame and the black mag. I put on a Glock 43 top end. I shot 80rds of ball ammo, perfect function. I could only get 14 in the magazine but it doesn’t bother me. I have not followed these at all and took a leap of faith, glad it worked out. View Quote The 15th round is definitely tight. I've got close to 1000rds through mine and it runs good with four silver mags. I have two black mags coming, hopefully they are good too. |
|
|
[#13]
Originally Posted By zpduff: The 15th round is definitely tight. I've got close to 1000rds through mine and it runs good with four silver mags. I have two black mags coming, hopefully they are good too. View Quote View All Quotes View All Quotes Originally Posted By zpduff: Originally Posted By wrhk33: I got a frame and the black mag. I put on a Glock 43 top end. I shot 80rds of ball ammo, perfect function. I could only get 14 in the magazine but it doesn’t bother me. I have not followed these at all and took a leap of faith, glad it worked out. The 15th round is definitely tight. I've got close to 1000rds through mine and it runs good with four silver mags. I have two black mags coming, hopefully they are good too. If you don't have one of those you should (if they make a model that fits any mag you have you should buy it)- without it the magazine wants to slip around as you try to cram the last two rounds in. https://www.maglula.com/product/uplula/ |
|
|
[#14]
Originally Posted By sandboxmedic: If you don't have one of those you should (if they make a model that fits any mag you have you should buy it)- without it the magazine wants to slip around as you try to cram the last two rounds in. https://www.maglula.com/product/uplula/ View Quote Can confirm. Took my new Micro out last week, loving it, but the LULA is pretty much a necessity for the last few rounds. |
|
"Sometimes you have to look for the irony, and sometimes it runs at you, head-butts you, kicks you in the balls, then bends you over and makes you its bitch." Hugh G. Rection
|
[Last Edit: Alaskanforfreedom]
[#15]
Originally Posted By David14: Can confirm. Took my new Micro out last week, loving it, but the LULA is pretty much a necessity for the last few rounds. View Quote |
|
What it boils down to is that they fear an effective resistance to their power: So, Left in power=Guns bad, mmmmkay...?, Right in power=Guns good!-thskirk
|
[#16]
Is everyone using Glock holsters for the Micros? Anyone put a TLR-7sub and used it in a Glock holster?
|
|
Greater love hath no man than this, that a man lay down his life for his friends. - John 15:13
The urge to save humanity is almost always only a false-face for the urge to rule it. - H.L. Mencken |
[#17]
|
|
|
[Last Edit: TNRonin]
[#18]
Just put the first 45rds through it. 100% with the micro slick and 2 black body mags. I have to shoot left hand/right eye due to a stroke. The recoil impulse is less than my p365 in the short configuration. I'll compare it this weekend against the p365 with a 12 round magazine. While the trigger did not feel good dry firing it it was not a problem at all. Yeah this one's a keeper! Attached File
7yds. |
|
Shoot straight and tell the truth!
|
[#19]
|
|
|
[Last Edit: XNARC]
[#20]
Is there any ongoing list of what iwb holsters will fit, base model, no light, etc?
|
|
|
[#21]
Originally Posted By XNARC: Is there any ongoing list of what iwb holsters will fit, base model, no light, etc? View Quote https://www.ar15.com/forums/Industry/Micro-Dagger-Accessories-Thread/301-304996/ |
|
|
[#22]
Any general idea of how long after order people have been able to pick up or get them mailed? Ordered my frame on the 26th and haven't heard anything
|
|
|
[#23]
|
|
Palmetto State Armory
3760 Fernandina Rd Columbia, SC 29210 Web Sales: 1-803-724-6950 |
[#24]
Originally Posted By staringback05: Any general idea of how long after order people have been able to pick up or get them mailed? Ordered my frame on the 26th and haven't heard anything View Quote |
|
Sideways :(
Proud Member of Team Ranstad "Fully-loaded, safety off. This here is a recipe for unpleasantness." - Malcom Reynolds I'm a dirty old man with a vivid imagination. I'll make do. |
[#25]
Are there any good aftermarket Micro Dagger mag wells being manufactured yet? Ive seen a 3d printed one but its not very dependable. Fits well.....its just 3d plastic.
|
|
|
[#26]
|
|
VCDL Executive Member - JOIN VCDL: https://vcdl.org/page/join
|
[#27]
Originally Posted By PalmettoStateArmory: If you would like us to help you trouble shoot, please PM me your order number. Thanks, Josiah View Quote View All Quotes View All Quotes Originally Posted By PalmettoStateArmory: Originally Posted By Snatchsquatch: I bought an X-1 upper to go on my 43X frame. I've had lots of light strike problems. I'm also getting pretty bad drag on primers which causes small brass chips to clog the striker channel. The oem glock slide has a slightly bigger radius at the bottom of the striker hole, maybe that's the issue? I've tried the glock parts in the psa slide and several different kinds of ammo but got the same results. The oem 43x upper runs flawlessly and will eat anything. If you would like us to help you trouble shoot, please PM me your order number. Thanks, Josiah I finally got some time to mess with the slide I got back. It said they installed a new barrel. It's got about .022" of endplay when in battery and some crazy peening on the locking surface (very sharp). I have not fired it since receiving it back. Anyone ever see anything like this? " /> " /> " /> " /> |
|
|
[#28]
Originally Posted By Snatchsquatch: I finally got some time to mess with the slide I got back. It said they installed a new barrel. It's got about .022" of endplay when in battery and some crazy peening on the locking surface (very sharp). I have not fired it since receiving it back. Anyone ever see anything like this? https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg" target="_blank">https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg" target="_blank">https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg" target="_blank">https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg" target="_blank">https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg View Quote View All Quotes View All Quotes Originally Posted By Snatchsquatch: Originally Posted By PalmettoStateArmory: Originally Posted By Snatchsquatch: I bought an X-1 upper to go on my 43X frame. I've had lots of light strike problems. I'm also getting pretty bad drag on primers which causes small brass chips to clog the striker channel. The oem glock slide has a slightly bigger radius at the bottom of the striker hole, maybe that's the issue? I've tried the glock parts in the psa slide and several different kinds of ammo but got the same results. The oem 43x upper runs flawlessly and will eat anything. If you would like us to help you trouble shoot, please PM me your order number. Thanks, Josiah I finally got some time to mess with the slide I got back. It said they installed a new barrel. It's got about .022" of endplay when in battery and some crazy peening on the locking surface (very sharp). I have not fired it since receiving it back. Anyone ever see anything like this? https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg" target="_blank">https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg" target="_blank">https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg" target="_blank">https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg" target="_blank">https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg Good god. That barrel hood looks terrible. Does it still cycle by hand? |
|
|
[#29]
Originally Posted By zpduff: Good god. That barrel hood looks terrible. Does it still cycle by hand? View Quote View All Quotes View All Quotes Originally Posted By zpduff: Originally Posted By Snatchsquatch: Originally Posted By PalmettoStateArmory: Originally Posted By Snatchsquatch: I bought an X-1 upper to go on my 43X frame. I've had lots of light strike problems. I'm also getting pretty bad drag on primers which causes small brass chips to clog the striker channel. The oem glock slide has a slightly bigger radius at the bottom of the striker hole, maybe that's the issue? I've tried the glock parts in the psa slide and several different kinds of ammo but got the same results. The oem 43x upper runs flawlessly and will eat anything. If you would like us to help you trouble shoot, please PM me your order number. Thanks, Josiah I finally got some time to mess with the slide I got back. It said they installed a new barrel. It's got about .022" of endplay when in battery and some crazy peening on the locking surface (very sharp). I have not fired it since receiving it back. Anyone ever see anything like this? https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg" target="_blank">https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg" target="_blank">https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg" target="_blank">https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg" target="_blank">https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg Good god. That barrel hood looks terrible. Does it still cycle by hand? It seems to cycle okay, I didn't attempt to load or fire it though. |
|
|
[#30]
Originally Posted By zpduff: Good god. That barrel hood looks terrible. Does it still cycle by hand? View Quote View All Quotes View All Quotes Originally Posted By zpduff: Originally Posted By Snatchsquatch: Originally Posted By PalmettoStateArmory: Originally Posted By Snatchsquatch: I bought an X-1 upper to go on my 43X frame. I've had lots of light strike problems. I'm also getting pretty bad drag on primers which causes small brass chips to clog the striker channel. The oem glock slide has a slightly bigger radius at the bottom of the striker hole, maybe that's the issue? I've tried the glock parts in the psa slide and several different kinds of ammo but got the same results. The oem 43x upper runs flawlessly and will eat anything. If you would like us to help you trouble shoot, please PM me your order number. Thanks, Josiah I finally got some time to mess with the slide I got back. It said they installed a new barrel. It's got about .022" of endplay when in battery and some crazy peening on the locking surface (very sharp). I have not fired it since receiving it back. Anyone ever see anything like this? https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg" target="_blank">https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg" target="_blank">https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg" target="_blank">https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg" target="_blank">https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg Good god. That barrel hood looks terrible. Does it still cycle by hand? Yeah, that's a whole lot of I have no idea why, after this many years, they can't get their QC under control. I don't mean to sound overly critical but the ongoing QC problems are everyone's biggest complaint (and usually the only legitimate one as they're perfectly capable of turning out products every bit as good as any other company, especially with the quality of the equipment they posses) and why they catch so much flak. |
|
|
[#31]
Originally Posted By Snatchsquatch: I finally got some time to mess with the slide I got back. It said they installed a new barrel. It's got about .022" of endplay when in battery and some crazy peening on the locking surface (very sharp). I have not fired it since receiving it back. Anyone ever see anything like this? https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg" target="_blank">https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg" target="_blank">https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg" target="_blank">https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg" target="_blank">https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg View Quote PM Sent. We will get you taken care of. Josiah |
|
Palmetto State Armory
3760 Fernandina Rd Columbia, SC 29210 Web Sales: 1-803-724-6950 |
[#32]
Originally Posted By jafrush: Finally got my frame the other day. Haven't gotten to shoot it yet but I like the grip vs the 43x frame. https://www.ar15.com/media/mediaFiles/350579/1000002752_jpg-3123466.JPG View Quote What holster is this? |
|
"If you want to pray, pray before the fight, or pray after the fight. But when you are in the fight, you fight."
MSgt. Paul Howe (ret.) |
[#33]
Originally Posted By dogrobber13: What holster is this? View Quote https://www.cyasupply.com/products/psa-dagger-micro-base-iwb |
|
|
[#34]
Are these available in retail stores yet, or just online? Can I go into the Savannah store and buy a frame and a couple of mags?
|
|
You won't be able to get ready. You have to be ready.
|
[#35]
Originally Posted By PalmettoStateArmory: PM Sent. We will get you taken care of. Josiah View Quote View All Quotes View All Quotes Originally Posted By PalmettoStateArmory: Originally Posted By Snatchsquatch: I finally got some time to mess with the slide I got back. It said they installed a new barrel. It's got about .022" of endplay when in battery and some crazy peening on the locking surface (very sharp). I have not fired it since receiving it back. Anyone ever see anything like this? https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg" target="_blank">https://i.postimg.cc/SNTtBzFP/20240318-094602.jpg https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg" target="_blank">https://i.postimg.cc/1t0NF6r5/20240318-094608.jpg https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg" target="_blank">https://i.postimg.cc/nzK0LXsq/20240318-094611.jpg https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg" target="_blank">https://i.postimg.cc/9fLy6NDw/20240318-094552.jpg PM Sent. We will get you taken care of. Josiah Any updates on this? I've sent a couple of emails and have not received a reply. The lack of qc and now support is pretty disappointing. @PalmettoStateArmory |
|
|
[Last Edit: PalmettoStateArmory]
[#36]
Originally Posted By Snatchsquatch: Any updates on this? I've sent a couple of emails and have not received a reply. The lack of qc and now support is pretty disappointing. @PalmettoStateArmory View Quote Danny on our pistol team had emailed you and I was on the email as well. I am having him call you today also. I apologize for any frustration. Thank you, Josiah |
|
Palmetto State Armory
3760 Fernandina Rd Columbia, SC 29210 Web Sales: 1-803-724-6950 |
[Last Edit: PalmettoStateArmory]
[#37]
Double Tap
|
|
Palmetto State Armory
3760 Fernandina Rd Columbia, SC 29210 Web Sales: 1-803-724-6950 |
[#38]
Originally Posted By PalmettoStateArmory: Danny on our pistol team had emailed you and I was on the email as well. I am having him call you today also. I apologize for any frustration. Thank you, Josiah View Quote View All Quotes View All Quotes Originally Posted By PalmettoStateArmory: Originally Posted By Snatchsquatch: Any updates on this? I've sent a couple of emails and have not received a reply. The lack of qc and now support is pretty disappointing. @PalmettoStateArmory Danny on our pistol team had emailed you and I was on the email as well. I am having him call you today also. I apologize for any frustration. Thank you, Josiah I never heard back after the email with you and Danny. I just spoke with Danny and Jerome on the phone a few minutes ago and I'll be sending the slide and my glock frame in when I get the rma. Thanks |
|
|
[#39]
Originally Posted By D_Man: It looks like that one is for a Glock 43, and probably works fine, but that company also makes it specifically for the Dagger Micro. https://www.cyasupply.com/products/psa-dagger-micro-base-iwb View Quote View All Quotes View All Quotes Originally Posted By D_Man: Originally Posted By dogrobber13: What holster is this? https://www.cyasupply.com/products/psa-dagger-micro-base-iwb Ran 100ish rounds through mine a week or two back, no issues. That's now about 250 rounds on that upper, had it on a spare 43x frame first. |
|
|
[Last Edit: telephoneman]
[#40]
My Dad just bought a micro and it was received by the FFL. The dealer called Dad and asked him to come by and check out the pistol because "I racked the slide, and something is not right with this gun". I went down this morning with Dad to check it out.
When racking the slide, it has weird feeling about halfway back. It's hard to describe in writing, but it feels like something is dragging. We also tried a different slide on this frame and it racked normally. Dad is going to contact PSA Monday to get their view on it. Has anybody seen this issue? Could it be something simple we can fix without having to return it? |
|
|
[#41]
Originally Posted By telephoneman: My Dad just bought a micro and it was received by the FFL. The dealer called Dad and asked him to come by and check out the pistol because "I racked the slide, and something is not right with this gun". I went down this morning with Dad to check it out. When racking the slide, it has weird feeling about halfway back. It's hard to describe in writing, but it feels like something is dragging. We also tried a different slide on this frame and it racked normally. Dad is going to contact PSA Monday to get their view on it. Has anybody seen this issue? Could it be something simple we can fix without having to return it? View Quote I have not heard of anything like this. If you send me his order number, I can have someone from our pistol team contact him. Thanks, Josiah |
|
Palmetto State Armory
3760 Fernandina Rd Columbia, SC 29210 Web Sales: 1-803-724-6950 |
[#42]
|
|
|
[Last Edit: GLOCKshooter]
[#43]
They are now bundling with an alternate red dot. Raven Optic. Either in house or exclusive from another manufcturer. Significantly less expensive than Holosun.
|
|
You won't be able to get ready. You have to be ready.
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.