Posted: 1/10/2024 11:37:47 PM EDT
| Since compatibility isn't what it is with G17/19 clones....this is a thread dedicated to the Micro. Post any and everything you have on or with your Micro. Optics, magazines, holsters or whatever! Especially if you have holsters dedicated to the C-1. Anyone make a great holster for this version? Well anyway......pic thread for anything Micro! |
|
Safariland Solis holster fits fantastic. Should also fit a C1 or X1 also (it will fit a 48). Accommodates any of the three lights that will fit a micro or 43x MOS ( TLR7Sub, Nightstick, or Surefire). Also accommodates optics (I tested with an EPS Carry). I have tested transplanting a 43x trigger group into the Micro, which fit perfectly. The 43x in the micro have some differences to the trigger group internals, so I you can't swap individual parts like the trigger bar or return springs, but the whole group is swappable. 43x/48. Slide stops will fit. They are different than the factory micro slide stop, but the micro frame is cut to accommodate either type. I tested this to confirm. The rear of the micro slide has less taper at the top, so any Glock sites should fit fine. I installed a set of TruGlo night sights for a Glock 20 on mine, and they fit perfect. The threaded 43 barrels from aim Surplus they were blowing out for 29 bucks as blems, also fit and work fine. A shield arms mag release fits and functions. Gen 3 Shield arms mags ran fine for me. Gens one and two did not. Probably some more stuff I'll think of in a bit. Oh, Safariland 7378 holster for a 43x fit, but fit tight. It was serviceable though. A Safariland 7371 for a 43x did not fit, but it won't fit my 43x MOS either. |
Safariland Solis holster with the C1 (would also fit X1 and ECC/standard Micro versions). This holster will accommodate any of the 3 weapon lights currently available for the Micro/43xMOS (TLR 7 Sub, Nightstick, or the Surefire), as well as any optic that does not extend beyond the front of the optic cut-out. Has the Safariland ALS retention system, and being a Safariland - there are 101 (at least) options out there for how you mount it to your body (high ride, low ride, mid ride, chest rigs, gunfighter rigs with leg strap, quick detach, paddle, belt loop, etc). Runs about $50 on sale. Top shelf choice for OWB Micro holsters, IMHO. 
|
|
Quoted: Hilliker, Slimfit, and Bordertown all offer micro dagger specific holsters now. Anybody know of anywhere else? kjconcealment.com |
|
Quoted: Quoted: Hilliker, Slimfit, and Bordertown all offer micro dagger specific holsters now. Anybody know of anywhere else? kjconcealment.com I ended up buying a Hilliker 
|
|
Quoted: Would really appreciate any light/laser combo fitments for my new Micro. I'll worry about holsters next. But for now, I need a light laser combo (and info about modifying it if necessary). Thanks! https://www.streamlight.com/products/detail/tlr-8-sub |
|
Quoted: The Streamlight TLR-8sub for the glock slim line MOS models will work. https://www.streamlight.com/products/detail/tlr-8-sub Thanks! Have you actually fitted one or know if anything needs to be modified to fit? I suppose I could buy it with Amazon Prime which has easy returns. |
|
Quoted: Thanks! Have you actually fitted one or know if anything needs to be modified to fit? I suppose I could buy it with Amazon Prime which has easy returns.  |
|
Quoted: It's the same as the TLR-7sub, just with a laser added to the bottom of the housing. You can see the 7sub I have mounted to the micro in a post up in this thread. https://www.ar15.com/media/mediaFiles/157876/2023-12-27_15_34_13-3073362.jpg Thanks I read: "had to sand down the bumps inside that retain on the bottom edge of the light a bit to get it to fit properly with a C-1 slide model" Is my new Micro a "C-1 slide model" or does that mean "Compact Slide". At least I know for certain that my 43X trigger guard is a slightly different configuration than the Micro's. New with this and learning as I go. |
|
Quoted: Thanks I read: "had to sand down the bumps inside that retain on the bottom edge of the light a bit to get it to fit properly with a C-1 slide model" Is my new Micro a "C-1 slide model"? New with this and learning as I go. The bumps I had to file down were in the holster. The light goes right on the gun no problem. |
|
Quoted: C-1 has the comp cuts on the front of the side. The bumps I had to file down were in the holster. The light goes right on the gun no problem. Quoted: Quoted: Thanks I read: "had to sand down the bumps inside that retain on the bottom edge of the light a bit to get it to fit properly with a C-1 slide model" Is my new Micro a "C-1 slide model"? New with this and learning as I go. The bumps I had to file down were in the holster. The light goes right on the gun no problem. Excellent! |
|
Adams Leatherworks out of Texas made a custom pancake for my Micro Dagger with a TLR-8. He's just purchased a plastic mold of the Micro Dagger (it's not on his webpage list yet), so I just sent him my light for correct fitment. This is the third holster he's made for me over the last 10 or more years, and his work is as good as it gets in leather. (He added a thin piece of steel to reinforce the sweat guard flap.) Adams Leatherworks 
|
|
Quoted: Adams Leatherworks out of Texas made a custom pancake for my Micro Dagger with a TLR-8. He's just purchased a plastic mold of the Micro Dagger (it's not on his webpage list yet), so I just sent him my light for correct fitment. This is the third holster he's made for me over the last 10 or more years, and his work is as good as it gets in leather. (He added a thin piece of steel to reinforce the sweat guard flap.) Adams Leatherworks https://www.ar15.com/media/mediaFiles/183309/Dagger_pancake1-3294465.jpg Really nice looking holster! ETA- His pattern prices are very reasonable, don't see any holster prices. Just ordered these base plates (4/pk) yesterday, they should be here Friday. https://cmconceptsusa.com/products/micro-dagger-base-plate-anodized-black Update- received my base plates today and installed them on two mags; when I get to the range I'll put them on the other mags and function check all of them. Quality appears very good as does the fit and finish and they went on with no problems. They do add some weight of course, they're aluminum and probably 50% thicker, but overall I'm impressed with them and while I'm not thrilled about dropping another $100 on parts for the Micro, I think they are probably a must if for no other reason than inspiring more confidence in the mags. |
|
Quoted: I started here but have gone to the EPS and EPS Carry for anything concealed. WAY easier to clean and nothing to interfere with the dot. Quoted: Quoted: Holosun K series? Didn't realize Holosun was making a sight that was compatible with the smaller footprint but according to their website they use an adapter, which they fail to show a picture of. Got any pictures? How does it sit and look on the gun?  |
|
Quoted: Didn't realize Holosun was making a sight that was compatible with the smaller footprint but according to their website they use an adapter, which they fail to show a picture of. Got any pictures? How does it sit and look on the gun? Random pic off the web to show the EPS carry on a MD slide:  |
|
Quoted: They have quite a few slimmer MRDSs. Their "K" footprint is a modified RMSc footprint. For guns like the Glock 43/48 MOS models, they need the little adaptor plate, or you have to mill off some recoil bosses to use the Holosun optics. However, the Micro Dagger doesn't have those extra bosses on it's slide, so it can direct mount the Holosun "K" footprint models, like the EPS carry, the 407k, 507k, etc. Random pic off the web to show the EPS carry on a MD slide: https://theoutdoorstrader.b-cdn.net/data/attachments/5064/5064025-d1e919825055e6dea0d31d4f5c36c866.jpg  |
| Head's up- if mounting a Holosun optic, none of the Holosun provided torx screws fit be Micro Dagger slide. The correct length screws are supposed to be included by PSA in the Micro box. If, like me, you ordered the frame and slide separately, you're SOL until you can acquire the correct length screws. |
|
Quoted: Head's up- if mounting a Holosun optic, none of the Holosun provided torx screws fit be Micro Dagger slide. The correct length screws are supposed to be included by PSA in the Micro box. If, like me, you ordered the frame and slide separately, you're SOL until you can acquire the correct length screws. I didn't get any screws with my complete gun, just the gun, case, lock, paperwork, etc.  I keep meaning to order a K series to mount on the gun so this is now I need to see about screws before I can even mount the thing?
|
|
Quoted: I didn't get any screws with my complete gun, just the gun, case, lock, paperwork, etc. I keep meaning to order a K series to mount on the gun so this is now I need to see about screws before I can even mount the thing?Quoted: Quoted: Head's up- if mounting a Holosun optic, none of the Holosun provided torx screws fit be Micro Dagger slide. The correct length screws are supposed to be included by PSA in the Micro box. If, like me, you ordered the frame and slide separately, you're SOL until you can acquire the correct length screws. I didn't get any screws with my complete gun, just the gun, case, lock, paperwork, etc. I keep meaning to order a K series to mount on the gun so this is now I need to see about screws before I can even mount the thing? |
|
Quoted: Head's up- if mounting a Holosun optic, none of the Holosun provided torx screws fit be Micro Dagger slide. The correct length screws are supposed to be included by PSA in the Micro box. If, like me, you ordered the frame and slide separately, you're SOL until you can acquire the correct length screws. Both my complete gun and my separate slide/frame orders came with the screws. |
|
Quoted: Both my complete gun and my separate slide/frame orders came with the screws. Quoted: Quoted: Head's up- if mounting a Holosun optic, none of the Holosun provided torx screws fit be Micro Dagger slide. The correct length screws are supposed to be included by PSA in the Micro box. If, like me, you ordered the frame and slide separately, you're SOL until you can acquire the correct length screws. Both my complete gun and my separate slide/frame orders came with the screws. Congrats ?? Maybe they'll mail me some |
|
Quoted: If you contact them I am sure they would. Quoted: Quoted: Congrats ?? Maybe they'll mail me some If you contact them I am sure they would. I have no idea what shipped, but I just got home, checked my email and I have a shipped notification from PSA. I didn't ask for anything or contact anyone but the only thing I can guess is the screws? I cuss, way too much (I'm a paramedic, I've worked offshore and in bad areas of the country and the world, etc.) but I'm trying to stop, but I saw the email, opened it and said out loud "Holy s%^&!"  Heck, even if it's just a sticker that'd still be cool. I'm not above calling PSA out on some things when I feel it's warranted, but customer service has not been one of those things. 
|
