User Panel
User Panel
User Panel
|
Posted: 10/1/2020 11:35:23 PM EDT
[#1]
Wasn’t it confirmed that the M17/M18 rear sight plate works with Danish slide?
|
|
|
|
Posted: 10/2/2020 12:50:02 AM EDT
[#2]
Quote HistoryQuoted: Can you verify if that barrel fits the M18? Quote HistoryQuoted: Quoted: If anyone still needs one I have a brand new X-Carry barrel. Never fired, no LCI notch Can you verify if that barrel fits the M18? It wouldn’t fit a M18, it doesn’t have a LCI notch |
|
|
|
Posted: 10/2/2020 12:56:40 AM EDT
[#3]
Quote HistoryQuoted: I asked @coregon about that barrel and unfortunately it is a compact length barrel not a carry length barrel, won't work. So the barrel and sights seem to be the hard parts to find. As CAR posted, the Compact and Carry P320s use the same slide and barrel length (3.9”). The difference is that the Carry has a Fullsize grip length (17-round mags) and the Compact has a shorter grip (15-round mags) |
|
|
|
Posted: 10/2/2020 1:11:17 AM EDT
[#4]
Quote HistoryQuoted: It wouldn’t fit a M18, it doesn’t have a LCI notch The LCI is pretty easy to remove... |
|
|
|
Posted: 10/2/2020 9:13:03 AM EDT
[#5]
Quote HistoryQuoted: As CAR posted, the Compact and Carry P320s use the same slide and barrel length (3.9”). The difference is that the Carry has a Fullsize grip length (17-round mags) and the Compact has a shorter grip (15-round mags) You fellas are talkin like you've never heard of a Dremel... 
|
|
|
|
Posted: 10/2/2020 8:48:21 PM EDT
[#6]
Quote HistoryQuoted: You fellas are talkin like you've never heard of a Dremel... Quote HistoryQuoted: Quoted: As CAR posted, the Compact and Carry P320s use the same slide and barrel length (3.9”). The difference is that the Carry has a Fullsize grip length (17-round mags) and the Compact has a shorter grip (15-round mags) You fellas are talkin like you've never heard of a Dremel...  Wrong thread.... WRONG THREAD!!!!! This is already milled for an optic, 
|
|
|
|
Posted: 10/2/2020 10:41:09 PM EDT
[#7]
Quote HistoryQuoted: I imagine it will be the same as the M18 Quote HistoryQuoted: I imagine it will be the same as the M18 Quoted: The front sight should be an 8, same number as the rear. From what I read the US Mil request a six oclock hold on the M17/M18 sights. So they use a different setup than the standard line. What I have been reading is that a 6 is what Sig uses on their X-Carry. |
|
|
|
Posted: 10/3/2020 9:45:28 AM EDT
[#8]
Quote HistoryQuoted: From what I read the US Mil request a six oclock hold on the M17/M18 sights. So they use a different setup than the standard line. What I have been reading is that a 6 is what Sig uses on their X-Carry. My M-17 commemorative has 8/8 and my X-Carry has 8/8. I know these are not representative of all the pistols out there, but it is what I have personally seen myself. |
|
|
|
Posted: 10/3/2020 3:21:30 PM EDT
[#9]
I fired my Danish MOD clone today. I picked up the 9mm X-Carry FCU that I had ordered for it and finished assembly.
All parts are OEM SIG, new out of the bag except for the FCU which came from a nearly new 2019 X-Carry that was parted out and a rear sight/plate assembly from a P320 M-17 Civilian model. The action was a bit sticky for the first 10 rounds and then started to smooth out. I attribute this to the New PVD slide and DLC coated barrel wearing in. The firing pin strikes were near dead center on the primer and there were no malfunctions. Firing impressions, it's just like my X-Carry, I like the mag well funnel. I can't comment on accuracy yet until I get some sights installed and shoot it with them. Here is the BOM of parts that I used, I will update when I find the correct sights. Please note, the zinc phosphate corrosion resistant parts and DLC coated X-Carry target crown barrel and extractor were my upgrade for this build, I think the Danish pistols use the standard P320 parts. NO P/N ; SIG P320 XCARRY 9MM FIRE CONTROL UNIT 1302481-35B-R ; SLIDE, 320, 9, XCARRY, DELTA POINT, DANMOD, COYOTE (PVD) 1302534-R ; BARREL, 320XC-9, DLC, 7.67 LOCK FACE, NON-PT KIT-320C-9-RECOIL-SPRING ; RECOIL SPRING ASSEMBLY, 320 COMPACT, 9 MM, CORROSION RESISTANT GRIP-MODX-CA-943-M-COY ; GRIP MODULE ASSY, 320 X-SERIES, 9/40/357, CARRY, MEDIUM, COYOTE KIT-320X-GRIP-WEIGHT ; GRIP WEIGHT, 320 X-SERIES, 1.6 OZ, RETAINER KIT-320X-MAG-FUNNEL ; MAGAZINE FUNNEL, 320 X-SERIES, SCREW 1300777-03-R ; LEVER, TAKE DOWN 38000144-R ; O-RING, TAKE DOWN LEVER 1301618-R ; ASSY, STRIKER GROUP-CORROSION RESISTANT 1301042-02-R ; EXTRACTOR, TUNGSTEN DLC 1301047-R ; P320 REAR EXTRACTOR SPRING GUIDE 1301420-01-R ; P320 EXTRACTOR SPRING, ZINC PHOSPHATE 1301423-01-R ; P320 EXTRACTOR PIN, ZINC PHOSPHATE 1300737-01-R ; P320 REAR SLIDE CAP, BLACK OXIDE 1302087-R ; PLATE, SIGHT, DP PRO, 2 SCREW 1302145-08-R ; ASSY, REAR SIGHT BASE - #8 MIM 1302528-R ; SCREW, NYLOK, SIGHT PLATE MOUNTING (2 required) 7400053-08-R ; SIGHT, FRONT, XRAY 3, #8 GREEN MAG-MOD-F-9-21-COY ; MAGAZINE, P320, 9MM, 21RD MAG, FULL-SIZE, COYOTE  
|
|
|
|
Posted: 10/3/2020 7:31:27 PM EDT
[#10]
I have a Compact / Carry it has a 6 front and 8 rear fact night sights and its a tac driver .
|
|
|
|
Posted: 10/3/2020 7:35:58 PM EDT
[#11]
Thank you CAR.
|
|
|
|
Posted: 10/4/2020 12:16:01 AM EDT
[#12]
Congrats car!!
But we are gonna need pics with soot built up on the muzzle. 
|
|
|
|
Posted: 10/4/2020 8:33:10 AM EDT
[#13]
Looks like SIG just did an end run around us...
 NEW Sig M18X Pistol: US Military Peak Pistol Performance |
|
|
|
Posted: 10/5/2020 2:22:59 AM EDT
[#14]
Well here is a stock photo of the Danish Defense P320:
 Attached FileAnd zoomed in on the front sight:  Attached FileETA: SOX10006 - #6 Front / #6 Rear SOX10002 - #6 Front / #8 Rear SOX10008 - #8 Front / #6 Rear SOX10004 - #8 Front / #8 Rear Don’t know if this will help but the height difference between the front sight and rear sight plate:  Attached FileM18:  Attached File |
|
|
|
Posted: 10/5/2020 8:52:10 PM EDT
[#15]
 Had to buy a sight pusher to get this finished. |
|
|
|
Posted: 10/5/2020 9:20:55 PM EDT
[#16]
Nice!
|
|
|
|
Posted: 10/5/2020 10:54:09 PM EDT
[#17]
Quote HistoryQuoted: https://www.AR15.Com/media/mediaFiles/58648/20201005_200603-1621985.jpg Had to buy a sight pusher to get this finished. Looks great. 
|
|
|
|
Posted: 10/7/2020 2:05:18 AM EDT
[#18]
Quote HistoryQuoted: https://www.AR15.Com/media/mediaFiles/58648/20201005_200603-1621985.jpg Had to buy a sight pusher to get this finished. Awesome! 
|
|
|
|
Posted: 10/7/2020 2:59:50 AM EDT
[#19]
Has anyone sourced the grip tape that is on the Danish pistol? Looks great!
|
|
|
|
Posted: 10/7/2020 4:11:23 PM EDT
[#20]
For those wondering,
My P320 Carry threaded barrel fit nicely in the Danish slide purchased from Osage County Guns. No movement, no difficulty going into battery. This barrel came from a standard P320 Carry Slide bought back in October 2016.    This was a pleasant surprise since I was led to believe that only the newer X-Carry barrels would fit. |
|
|
|
Posted: 10/8/2020 1:27:24 AM EDT
[#21]
Quote HistoryQuoted: For those wondering, My P320 Carry threaded barrel fit nicely in the Danish slide purchased from Osage County Guns. No movement, no difficulty going into battery. This barrel came from a standard P320 Carry Slide bought back in October 2016. https://www.AR15.Com/media/mediaFiles/1177/IMG_6481-1624980.jpg https://www.AR15.Com/media/mediaFiles/1177/IMG_6480-1624979.jpg https://www.AR15.Com/media/mediaFiles/1177/IMG_6482-1624978.jpg This was a pleasant surprise since I was led to believe that only the newer X-Carry barrels would fit. Great to hear! Slide looks great, now just need to whole ensemble! |
|
|
|
Posted: 10/10/2020 10:16:05 AM EDT
[#22]
 This thing kinda sucks. I mean, I aim at something, press the trigger, and I hit it. Where is the fun in that? |
|
|
|
Posted: 10/10/2020 11:42:19 AM EDT
[#23]
Just took my (still sightless) Danish X-Carry clone out and put 50 more rounds through it. Flawless function and it has smoothed out nicely.
What is truly amazing is that I put this pistol together using all new in the bag parts with absolutely no fitting and it works perfectly. You could not do that 40 years ago, there is something to be said for modern manufacturing techniques and processes. |
|
|
|
Posted: 10/10/2020 12:09:10 PM EDT
[#24]
I got a barrel today, so progress is being made .. albeit slowly.
Does anyone have a link to the CORRECT rear sight & plate? I thought I bought the right one, and now I have to eat shipping and a 10% restocking fee. 
|
|
|
|
Posted: 10/10/2020 12:44:23 PM EDT
[#25]
Quote HistoryQuoted: I got a barrel today, so progress is being made .. albeit slowly. Does anyone have a link to the CORRECT rear sight & plate? I thought I bought the right one, and now I have to eat shipping and a 10% restocking fee. I called SIG yesterday and they said they do not have any sight plates in stock at the moment. I may have an extra new rear night sight (I accidently bought two) for this that I can sell later in the week if you want it. |
|
|
|
Posted: 10/10/2020 12:49:31 PM EDT
[#26]
@CAR what is the part number for the rear sight plate and anyone other than Sig have them?
I also received my barrel today and a few small parts. Down to the FCU and rear sight plate setup. |
|
|
|
Posted: 10/10/2020 12:54:16 PM EDT
[#27]
Quote HistoryQuoted: @CAR what is the part number for the rear sight plate and anyone other than Sig have them? I also received my barrel today and a few small parts. Down to the FCU, rear sight, front sight, and striker assembly. I have been looking all over the web for the sight plate and I can not find anyone who has one in stock right now, SIG may be the only source currently and they are out. The part number the SIG rep gave for the plate was 13067018-R, I have not confirmed that this is correct though. The SIG CS rep seemed very surprised that I had a Danish slide and asked where I got it from. 
|
|
|
|
Posted: 10/10/2020 2:23:58 PM EDT
[#28]
Quote HistoryQuoted: Just took my (still sightless) Danish X-Carry clone out and put 50 more rounds through it. Flawless function and it has smoothed out nicely. What is truly amazing is that I put this pistol together using all new in the bag parts with absolutely no fitting and it works perfectly. You could not do that 40 years ago, there is something to be said for modern manufacturing techniques and processes. Read about the original M1911 testing. Parts interchangeability was part of the reason it was adopted. It was only when multiple companies started making 1911s did fitting become required. |
|
|
|
Posted: 10/10/2020 2:37:44 PM EDT
[#29]
Quote HistoryQuoted: https://www.AR15.Com/media/mediaFiles/58648/20201010_084207-1628876.jpg This thing kinda sucks. I mean, I aim at something, press the trigger, and I hit it. Where is the fun in that? That is sexy! |
|
|
|
Posted: 10/10/2020 6:50:11 PM EDT
[#30]
@Postal0311 do you have a link to the rear site plate you are using or did it come off a complete slide?
|
|
|
|
Posted: 10/10/2020 8:57:25 PM EDT
[#31]
Quote HistoryQuoted: I got a barrel today, so progress is being made .. albeit slowly. Does anyone have a link to the CORRECT rear sight & plate? I thought I bought the right one, and now I have to eat shipping and a 10% restocking fee. @DK-Prof - Do you know if the Danish military has procured or is procuring a RDS for their pistols and if so which one? If you’re unable to find the right cover plate that could be one solution that would still be clone correct, if nothing else |
|
|
|
Posted: 10/11/2020 6:27:40 AM EDT
[#32]
Quote HistoryQuoted: Read about the original M1911 testing. Parts interchangeability was part of the reason it was adopted. It was only when multiple companies started making 1911s did fitting become required. Actually, I was thinking of the Colt Government Model when I wrote this. I have owned (and still own) many Colt M1911s over the years. There are many cases where parts are not interchangeable without a great amount of fitting, especially in the barrel/slide and grip and thumb safeties and sometimes sear and disconnector. I currently own two 1986 Colt Combat Elites, the tolerances are so disparate between the two that you cannot swap the barrel and slide assemblies or combinations of the between the two pistols and have a properly functioning pistol. In fact, with one slide on the other pistol, you cannot even engage the thumb safety as it hits the front of the slide notch. Just about every Colt Government model I own show evidence of a large amount of hand fitting and filing done during assembly. This may have been reduced in recent years as Colt has invested in CNC machines. |
|
|
|
Posted: 10/11/2020 8:57:34 AM EDT
[#33]
Damn it I had to see this thread right when I was thinking about selling my Danish slide and rear sight assembly to fund a new project.
|
|
|
|
Posted: 10/11/2020 9:31:43 AM EDT
[#34]
Anyone looking for the rear sight assembly, this is the part numbers needed below.
Rear Sight: 1302145-08-R Sight Plate / Cover: 1302087-R Screws: 1302528-R (NOTE, These are NOT sold as a set with 2 screws, you will need to order 2 of these for a pair). Also just want to add that OsageCountyGuns has all the parts mentioned above available in a kit for like $150 I believe but do yourself a favor and get these directly from Sig, if memory serves me right you will save over $90 compared to Osage wanting $150 for everything (This price from them is also NOT even including the front sight. |
|
|
|
Posted: 10/11/2020 2:00:22 PM EDT
[#35]
Deleted
|
|
|
|
Posted: 10/11/2020 3:56:01 PM EDT
[#36]
Quote HistoryQuoted: Anyone looking for the rear sight assembly, this is the part numbers needed below. Rear Sight: 1302145-08-R Sight Plate / Cover: 1302087-R Screws: 1302528-R (NOTE, These are NOT sold as a set with 2 screws, you will need to order 2 of these for a pair). Also just want to add that OsageCountyGuns has all the parts mentioned above available in a kit for like $150 I believe but do yourself a favor and get these directly from Sig, if memory serves me right you will save over $90 compared to Osage wanting $150 for everything (This price from them is also NOT even including the front sight. This is really helpful - thanks!
|
|
|
|
Posted: 10/11/2020 4:19:47 PM EDT
[#37]
Here are some pictures I took of the Danish pistol at SHOT.
Notice the DK serial number on the FCU   Sights are what is referred to as 'X-Ray sights' |
|
|
|
Posted: 10/11/2020 5:02:23 PM EDT
[#38]
Thank you for the photos.
|
|
|
|
Posted: 10/11/2020 5:13:20 PM EDT
[#39]
Quote HistoryQuoted: Here are some pictures I took of the Danish pistol at SHOT. Notice the DK serial number on the FCU https://i.imgur.com/Mk5t8bl.jpg https://i.imgur.com/4LS5Qrt.jpg Sights are what is referred to as 'X-Ray sights' Thanks. Interesting that the example there doesn't have the grip tape. Maybe it's something the Danes add AFTER the guns are delivered, and is home-brewed? |
|
|
|
Posted: 10/11/2020 6:17:54 PM EDT
[#40]
Quote HistoryQuoted: Here are some pictures I took of the Danish pistol at SHOT. Notice the DK serial number on the FCU https://i.imgur.com/Mk5t8bl.jpg https://i.imgur.com/4LS5Qrt.jpg Sights are what is referred to as 'X-Ray sights' yes, thanks for the photos, @ elucidate . Curious if you have photos of the other pistols. Like what appears to be a black m18. I saw a faraway pic of that area from SHOT. I could ever find images or info of those pistols specifically. |
|
|
|
Posted: 10/11/2020 6:23:25 PM EDT
[#41]
Quote HistoryQuoted: Thanks. Interesting that the example there doesn't have the grip tape. Maybe it's something the Danes add AFTER the guns are delivered, and is home-brewed? I've supplied DALO with quite a bit of things, such as most recently, their NEMO 300WM rifles, and they order a bunch of things from different places and have it shipped with to assemble in house. |
|
|
|
Posted: 10/11/2020 6:24:38 PM EDT
[#42]
Quote HistoryQuoted: Curious if you have photos of the other pistols. Like what appears to be a black m18. Unfortunately no. I took pictures of the SAS P320 and the Danish XCarry and that was it. |
|
|
|
Posted: 10/11/2020 7:05:17 PM EDT
[#43]
I finished my version of the Danish Military clone. As I mentioned earlier in an earlier comment I was surprised when my older P320 Compact/Carry threaded barrel fit the Danish P320 Carry slide.
I also ordered the X-Carry barrel as mentioned by CAR in previous thread: 1302534-R ; BARREL, 320XC-9, DLC, 7.67 LOCK FACE, NON-PT. I received it and thought I would give a quick side by side comparison of the P320 Threaded Barrel from 2016 Compact/Carry gun. Threaded barrel is on the right.    Internal slide parts were from the older P320 Compact/Carry slide. When I test fire will test both barrels to see what differences if any there is between them. The FCU I used was from an X-5, with Grayguns trigger added. Here is my completed P320 with the X-Carry barrel installed. This 320XC-9 barrel also fit nicely in the older 2016 P320 Compact/Carry slide. I used the Bobro engineering plate to mount my Trijicon RMR. The plate fit nicely, and RMR mounted with no difficulty. Front sight is a Sig Lite #6 suppressor sight. May put a #8 on depending on shot placement after test fire.  
|
|
|
|
Posted: 10/11/2020 9:11:52 PM EDT
[#44]
Very nice, thanks for sharing.
|
|
|
|
Posted: 10/12/2020 1:53:06 AM EDT
[#45]
Quote HistoryQuoted: Here are some pictures I took of the Danish pistol at SHOT. Notice the DK serial number on the FCU https://i.imgur.com/Mk5t8bl.jpg https://i.imgur.com/4LS5Qrt.jpg Sights are what is referred to as 'X-Ray sights' Thanks for the photos! |
|
|
|
Posted: 10/12/2020 9:06:25 PM EDT
[#46]
Quote HistoryQuoted: Thanks. Interesting that the example there doesn't have the grip tape. Maybe it's something the Danes add AFTER the guns are delivered, and is home-brewed? The guns are handled by a third party before delivery to the Danish MOD, maybe they supply the grip tape inserts, https://www.ctsolutions.dk/ |
|
|
|
Posted: 10/21/2020 11:30:51 AM EDT
[#47]
https://www.sigsauer.com/store/catalogsearch/result?q=talon+grips&utm_campaign=2020_GiftGuide&utm_medium=email&utm_source=Eloqua
Looks like you'd have to cut the edges... |
|
|
|
Posted: 10/21/2020 12:30:23 PM EDT
[#48]
Quote HistoryQuoted: https://www.sigsauer.com/store/catalogsearch/result?q=talon+grips&utm_campaign=2020_GiftGuide&utm_medium=email&utm_source=Eloqua Looks like you'd have to cut the edges... Got the email this morning and came to post but you beat me to it. |
|
|
|
Posted: 10/22/2020 3:04:23 AM EDT
[#49]
Quote HistoryQuoted: Anyone looking for the rear sight assembly, this is the part numbers needed below. Rear Sight: 1302145-08-R Sight Plate / Cover: 1302087-R Screws: 1302528-R (NOTE, These are NOT sold as a set with 2 screws, you will need to order 2 of these for a pair). Also just want to add that OsageCountyGuns has all the parts mentioned above available in a kit for like $150 I believe but do yourself a favor and get these directly from Sig, if memory serves me right you will save over $90 compared to Osage wanting $150 for everything (This price from them is also NOT even including the front sight. @nizo_mizer I don't see this stuff at either SIG or Osage. Did you order on the phone with SIG? I've got everything for this but the sights. |
|
|
|
Posted: 10/22/2020 5:19:55 AM EDT
[#50]
Quote HistoryQuoted: @nizo_mizer I don't see this stuff at either SIG or Osage. Did you order on the phone with SIG? I've got everything for this but the sights. If you need one, I have an extra new SIG factory rear night sight, 1302145-08-R for sale for $33 shipped.   
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
