User Panel
User Panel
User Panel
|
Posted: 9/18/2020 8:21:23 PM EDT
[#1]
So far I have ordered the slide and grip frame. Osage County Guns ships very fast as my order is already on the way via FedEx and will be here Tuesday.
The next parts to track down seem to be as followed:
In the end this will be nice next to my decommissioned M17 and regular M18. |
|
|
|
Posted: 9/18/2020 9:36:17 PM EDT
[#2]
Quote HistoryQuoted: . . .
In the end this will be nice next to my decommissioned M17 and regular M18. Greeting Jake cutter  FCU: before DK-Prof ordered the 80% one, I created a thread to help him find a complete FCU as fast as possible: https://www.ar15.com/forums/Handguns/Where-to-buy-stand-alone-complete-FCU-for-P320-this-week-/14-196760/ There is an excellent, money-saving suggestion in that thread you may want to consider (thanks 64tinc!). “ Posted: Today 1:57:50 PM EDT Report I think Proven arms had complete full size for $475 this week. Sell the complete upper for 325 and get a magazine fcu grip module for 150.” By the same token, Sig recently (pre-panic) sold off a ton of CPO (certified period-owned) P320s for around $385. All handguns are hard to find now. But cannibalizing an existing 320 might save you a few $$. RE barrels: I believe an ordinary p320 compact barrel will fit this slide. Could you post a photo or two of your Danish build in this thread as it progresses? |
|
|
|
Posted: 9/20/2020 10:36:50 PM EDT
[#3]
Quote HistoryQuoted: Can you buy it and return it? I don't think that anyone can really tell you if it would fit given the changes in their cut Quote HistoryQuoted: Quoted: Does anyone have an opinion on this? ... especially given comments that the plate/dimensions might have changed between early and later models? If this is correct, obviously I want to jump on it. Can you buy it and return it? I don't think that anyone can really tell you if it would fit given the changes in their cut Well, apparently it's a moot point ... because it is now "sold out" Dammit. 
|
|
|
|
Posted: 9/21/2020 7:01:39 PM EDT
[#4]
I'm getting there. I like this grip better than the M18 grip.
|
|
|
|
Posted: 9/21/2020 7:04:49 PM EDT
[#5]
Quote HistoryQuoted: I'm getting there. I like this grip better than the M18 grip. https://www.AR15.Com/media/mediaFiles/58648/20200921_183644-1601836.jpg  So jelly. 
|
|
|
|
Posted: 9/21/2020 8:05:05 PM EDT
[#6]
Is it only the trigger that is different on the X models or are other internal parts changed?
|
|
|
|
Posted: 9/21/2020 8:31:01 PM EDT
[#7]
Quote HistoryQuoted: I'm getting there. I like this grip better than the M18 grip. https://www.AR15.Com/media/mediaFiles/58648/20200921_183644-1601836.jpg Where did you get the mag well and how does it attach to the grip out of curiosity? Also do they work with the 17 round mags? Mine is missing the grip tape, magwell:  Attached FileETA: Flat trigger is the other part missing. |
|
|
|
Posted: 9/21/2020 8:38:32 PM EDT
[#8]
Where are you guys sourcing the other parts, ie barrel and sights?
|
|
|
|
Posted: 9/21/2020 8:40:20 PM EDT
[#9]
Got the mag well the same place I got the slide.
  17 round mag feels like it comes just shy of working. Maybe with a different baseplate it would. Mag well has a lug in the front and is held on by a screw that goes through the lanyard hole.  SIG was so kind as to have mine come pre-scratched. |
|
|
|
Posted: 9/21/2020 8:58:56 PM EDT
[#10]
Quote HistoryQuoted: Got the mag well the same place I got the slide. https://www.AR15.Com/media/mediaFiles/58648/20200921_203457-1601947.jpg https://www.AR15.Com/media/mediaFiles/58648/20200921_203503-VCQBR-Main-1601948.jpg 17 round mag feels like it comes just shy of working. Maybe with a different baseplate it would. Mag well has a lug in the front and is held on by a screw that goes through the lanyard hole. https://www.AR15.Com/media/mediaFiles/58648/20200921_180508-1601950.jpg SIG was so kind as to have mine come pre-scratched. Thank you for the pics! |
|
|
|
Posted: 9/21/2020 10:20:49 PM EDT
[#11]
Quote HistoryQuoted: I'm getting there. I like this grip better than the M18 grip. https://www.AR15.Com/media/mediaFiles/58648/20200921_183644-1601836.jpg Where did you find the rear sight/cover plate ? |
|
|
|
Posted: 9/21/2020 10:51:31 PM EDT
[#12]
I bought it from a website.
I see two different part numbers for the SIG flat trigger, is there a difference between them? Also, which height front sight is used? I read that the M18 uses a different height than the rest of the line. Presumably, this one uses the normal height one. |
|
|
|
Posted: 9/21/2020 11:17:09 PM EDT
[#13]
Quote HistoryQuoted: I bought it from a website. I see two different part numbers for the SIG flat trigger, is there a difference between them? Also, which height front sight is used? I read that the M18 uses a different height than the rest of the line. Presumably, this one uses the normal height one. Most likely one is the X-series flat trigger and one is the Legion skeletonized flat trigger. The more expensive one is the Legion. |
|
|
|
Posted: 9/21/2020 11:49:11 PM EDT
[#14]
Quote HistoryQuoted: I'm getting there. I like this grip better than the M18 grip. https://www.AR15.Com/media/mediaFiles/58648/20200921_183644-1601836.jpg So was that a M18?? You got the Danish slide?? |
|
|
|
Posted: 9/22/2020 12:00:48 AM EDT
[#15]
Quote HistoryQuoted: Most likely one is the X-series flat trigger and one is the Legion skeletonized flat trigger. The more expensive one is the Legion. I'm not talking about the skeletal one. There is the flat trigger, and the flat trigger black oxide. But the description for the flat trigger is that it is black oxide.  |
|
|
|
Posted: 9/22/2020 4:08:23 PM EDT
[#16]
I think I found the slight plate - website said it was in stock. I just ordered one. Fingers crossed.
I had to stop by the local gun store today to pick up a transfer (also Danish military related ) but they didn't have any P320 FCU packs.
|
|
|
|
Posted: 9/22/2020 6:32:30 PM EDT
[#17]
Quote HistoryQuoted: Is it only the trigger that is different on the X models or are other internal parts changed? Just the trigger |
|
|
|
Posted: 9/22/2020 7:13:38 PM EDT
[#18]
Quote HistoryQuoted: I think I found the slight plate - website said it was in stock. I just ordered one. Fingers crossed. I had to stop by the local gun store today to pick up a transfer (also Danish military related ) but they didn't have any P320 FCU packs.@DK-Prof can you post a link to the site base? Also any luck on barrels? |
|
|
|
Posted: 9/22/2020 8:19:20 PM EDT
[#19]
Quote HistoryQuoted: @DK-Prof can you post a link to the site base? Also any luck on barrels? https://www.midwestgunworks.com/page/mgwi/prod/1301824m-08-r I think my plan for all the upper parts is to find an existing complete slide (possibly with the help of a friend), and then switch the parts over. |
|
|
|
Posted: 9/23/2020 2:01:05 PM EDT
[#20]
I believe this is the correct trigger & the one that will fit DK’s gun:
 Attached FileOther parts he has / will get soon: - Slide - Coyote X-grip frame - rear sight (ordered) - FCU (80 percent) - LPK (will get) - mag well (ordered) - slide parts with regular 320 barrel (will get) Other than the grip tape, correct front sight, and the exact X barrel, is there anything he is still missing? |
|
|
|
Posted: 9/23/2020 2:50:07 PM EDT
[#21]
Quote HistoryQuoted: ... Other than the grip tape, correct front sight, and the exact X barrel, is there anything he is still missing? I ordered some of the grip tape/panels from Springer Precision. I ordered three sets so that I have several opportunities to screw it up as I try to cut them to the correct shape/size. |
|
|
|
Posted: 9/23/2020 3:43:35 PM EDT
[#22]
Quote HistoryQuoted: I believe this is the correct trigger & the one that will fit DK’s gun: https://www.AR15.Com/media/mediaFiles/417478/8A977FB7-0851-4B77-9B32-A0E5EBF0DD82_jpe-1603932.JPG Other parts he has / will get soon: - Slide - Coyote X-grip frame - rear sight (ordered) - FCU (80 percent) - LPK (will get) - mag well (ordered) - slide parts with regular 320 barrel (will get) Other than the grip tape, correct front sight, and the exact X barrel, is there anything he is still missing? Just to confirm that the slide is an “X” slide or a regular profile slide? I think that will determine which barrel is needed. |
|
|
|
Posted: 9/23/2020 4:16:52 PM EDT
[#23]
Quote HistoryQuoted: Just to confirm that the slide is an “X” slide or a regular profile slide? I think that will determine which barrel is needed. Wnen I asked @coregon he said I needed an X barrel which is different than a standard barrel. So if you find a 3.9 barrel, make sure it's an X and not just a standard. Down side is the X barrel isn't listed on Sigs website and I haven't found them for sale by themselves. I have been looking for a complete X carry to strip but no luck there. |
|
|
|
Posted: 9/23/2020 6:48:21 PM EDT
[#24]
Quote HistoryQuoted: Wnen I asked @coregon he said I needed an X barrel which is different than a standard barrel. So if you find a 3.9 barrel, make sure it's an X and not just a standard. Down side is the X barrel isn't listed on Sigs website and I haven't found them for sale by themselves. I have been looking for a complete X carry to strip but no luck there. Quote HistoryQuoted: Quoted: Just to confirm that the slide is an “X” slide or a regular profile slide? I think that will determine which barrel is needed. Wnen I asked @coregon he said I needed an X barrel which is different than a standard barrel. So if you find a 3.9 barrel, make sure it's an X and not just a standard. Down side is the X barrel isn't listed on Sigs website and I haven't found them for sale by themselves. I have been looking for a complete X carry to strip but no luck there. I have both (see page 1); I will swap them around tonight & see if they interchange & feed / eject dummy rounds. UPDATE: @coregon is right: NOT INTERCHANGEABLE! (this was a surprise to me  )Here is an Xcarry slide (coyote brown) with a regular P320 Xseries barrel installed: it won’t go into battery:  Attached FileLooks like the hood is just a smidge too wide on a regular P320 barrel. DK-Prof will probably need an actual Xcarry barrel; a telephone call to Sig seems in order now. |
|
|
|
Posted: 9/23/2020 9:35:07 PM EDT
[#25]
That's what I thought. Too bad the X Carry barrels aren't available anywhere. Hope sig puts them on their site or a distributor gets some.
|
|
|
|
Posted: 9/23/2020 10:28:20 PM EDT
[#26]
Quote HistoryQuoted: I have both (see page 1); I will swap them around tonight & see if they interchange & feed / eject dummy rounds. UPDATE: @coregon is right: NOT INTERCHANGEABLE! (this was a surprise to me )Here is an Xcarry slide (coyote brown) with a regular P320 Xseries barrel installed: it won’t go into battery: https://www.AR15.Com/media/mediaFiles/417478/33AB54E2-BE8E-4C53-A137-085C533FE339_jpe-1604513.JPG Looks like the hood is just a smidge too wide on a regular P320 barrel. DK-Prof will probably need an actual Xcarry barrel; a telephone call to Sig seems in order now. Quote HistoryQuoted: Quoted: Quoted: Just to confirm that the slide is an “X” slide or a regular profile slide? I think that will determine which barrel is needed. Wnen I asked @coregon he said I needed an X barrel which is different than a standard barrel. So if you find a 3.9 barrel, make sure it's an X and not just a standard. Down side is the X barrel isn't listed on Sigs website and I haven't found them for sale by themselves. I have been looking for a complete X carry to strip but no luck there. I have both (see page 1); I will swap them around tonight & see if they interchange & feed / eject dummy rounds. UPDATE: @coregon is right: NOT INTERCHANGEABLE! (this was a surprise to me )Here is an Xcarry slide (coyote brown) with a regular P320 Xseries barrel installed: it won’t go into battery: https://www.AR15.Com/media/mediaFiles/417478/33AB54E2-BE8E-4C53-A137-085C533FE339_jpe-1604513.JPG Looks like the hood is just a smidge too wide on a regular P320 barrel. DK-Prof will probably need an actual Xcarry barrel; a telephone call to Sig seems in order now. Wow. That is really interesting ... in addition to being frustrating. |
|
|
|
Posted: 9/23/2020 10:34:12 PM EDT
[#27]
Quote HistoryQuoted: Wow. That is really interesting ... in addition to being frustrating. Quote HistoryQuoted: Quoted: Quoted: Quoted: Just to confirm that the slide is an “X” slide or a regular profile slide? I think that will determine which barrel is needed. Wnen I asked @coregon he said I needed an X barrel which is different than a standard barrel. So if you find a 3.9 barrel, make sure it's an X and not just a standard. Down side is the X barrel isn't listed on Sigs website and I haven't found them for sale by themselves. I have been looking for a complete X carry to strip but no luck there. I have both (see page 1); I will swap them around tonight & see if they interchange & feed / eject dummy rounds. UPDATE: @coregon is right: NOT INTERCHANGEABLE! (this was a surprise to me )Here is an Xcarry slide (coyote brown) with a regular P320 Xseries barrel installed: it won’t go into battery: https://www.AR15.Com/media/mediaFiles/417478/33AB54E2-BE8E-4C53-A137-085C533FE339_jpe-1604513.JPG Looks like the hood is just a smidge too wide on a regular P320 barrel. DK-Prof will probably need an actual Xcarry barrel; a telephone call to Sig seems in order now. Wow. That is really interesting ... in addition to being frustrating. That’s why Dominion21 is measuring twice so you only have to buy once! 
|
|
|
|
Posted: 9/23/2020 10:39:36 PM EDT
[#28]
M18 barrel works fine, but you will have the LCI notch.
|
|
|
|
Posted: 9/23/2020 10:42:54 PM EDT
[#29]
Quote HistoryQuoted: Wow. That is really interesting ... in addition to being frustrating. Don't you have a Dremel?
|
|
|
|
Posted: 9/25/2020 11:22:50 PM EDT
[#30]
https://youtu.be/1ANG0e6N6aQ
https://youtu.be/048GvzuIATs |
|
|
|
Posted: 9/27/2020 6:02:54 AM EDT
[#31]
Very interesting thread.
|
|
|
|
Posted: 9/27/2020 1:38:14 PM EDT
[#32]
Quote HistoryQuoted: https://youtu.be/1ANG0e6N6aQ https://youtu.be/048GvzuIATs Thanks! Those videos really give some nice views of the pistol. Sorry about the jibber-jabber language.
|
|
|
|
Posted: 9/27/2020 1:58:18 PM EDT
[#33]
Quote HistoryQuoted: Thanks! Those videos really give some nice views of the pistol. Sorry about the jibber-jabber language. Quote HistoryQuoted: Quoted: https://youtu.be/1ANG0e6N6aQ https://youtu.be/048GvzuIATs Thanks! Those videos really give some nice views of the pistol. Sorry about the jibber-jabber language. Even though I do not speak the language I understood it loud and clear: “Only the Sig met our standards, it was quite clear” Camera pans over to non-Sig shooters: “God this thing feels like a bloody 38x89mm piece of wood.” “This pistol is like trying to stuff a goose in a fucking drawer.”
|
|
|
|
Posted: 9/27/2020 2:33:27 PM EDT
[#34]
I have the last couple parts I need on order minus the grip tape.
Anyone make any progress on that yet? |
|
|
|
Posted: 9/27/2020 2:39:36 PM EDT
[#35]
Quote HistoryQuoted: I have the last couple parts I need on order minus the grip tape. Anyone make any progress on that yet? I ordered some from the Spring Precision (posted earlier in this thread) as a backup, thinking that it can probably be hand-cut into the right shapes. Obviously it's not going to be "correct" but it might end up being close enough.
|
|
|
|
Posted: 10/1/2020 2:16:36 PM EDT
[#36]
Quote HistoryQuoted: https://www.midwestgunworks.com/page/mgwi/prod/1301824m-08-r I think my plan for all the upper parts is to find an existing complete slide (possibly with the help of a friend), and then switch the parts over. Quote HistoryQuoted: Quoted: @DK-Prof can you post a link to the site base? Also any luck on barrels? https://www.midwestgunworks.com/page/mgwi/prod/1301824m-08-r I think my plan for all the upper parts is to find an existing complete slide (possibly with the help of a friend), and then switch the parts over. So I just got this yesterday, and it does NOT fit on the slide. I hope I can return it, since it opened the package. 
|
|
|
|
Posted: 10/1/2020 4:33:07 PM EDT
[#37]
If anyone still needs one I have a brand new X-Carry barrel. Never fired, no LCI notch
|
|
|
|
Posted: 10/1/2020 4:44:05 PM EDT
[#38]
Quote HistoryQuoted: If anyone still needs one I have a brand new X-Carry barrel. Never fired, no LCI notch Can you verify if that barrel fits the M18? |
|
|
|
Posted: 10/1/2020 5:12:01 PM EDT
[#39]
Quote HistoryQuoted: If anyone still needs one I have a brand new X-Carry barrel. Never fired, no LCI notch I definitely need one, so I'd absolutely be interested. I'll send you an IM. |
|
|
|
Posted: 10/1/2020 7:20:31 PM EDT
[#40]
Quote HistoryQuoted: I definitely need one, so I'd absolutely be interested. I'll send you an IM. The X-Carry barrel is the one to use with the Danish slide. I have purchased a Danish slide myself, here is the barrel I am using in it, PN# 1302534-R Barrel, 320XC-9 DLC, 7.67 Lock Face, Non-PT. https://www.sigsauer.com/store/barrel-p320xc-9-dlc.html Unfortunately, I have purchased the same rear sight and cover that you did and it seems to be for a Romeo sight, we need the cover for Delta Point cut. I will have to return it when it arrives. I think the rear sight cover that is used on the M-17 and M-18 civilian models and and the newer X-Carry compacts is the correct cover. |
|
|
|
Posted: 10/1/2020 7:22:22 PM EDT
[#41]
Quote HistoryQuoted: The X-Carry barrel is the one to use with the Danish slide. I have purchased a Danish slide myself, here is the barrel I am using in it, PN# 1302534-R Barrel, 320XC-9 DLC, 7.67 Lock Face, Non-PT. Quote HistoryQuoted: The X-Carry barrel is the one to use with the Danish slide. I have purchased a Danish slide myself, here is the barrel I am using in it, PN# 1302534-R Barrel, 320XC-9 DLC, 7.67 Lock Face, Non-PT. Good to know! Thanks! Unfortunately, I have purchased the same rear sight and cover that you did and it seems to be for a Romeo sight, we need the cover for Delta Point cut. I will have to return it when it arrives. I think the rear sight cover that is used on the M-17 and M-18 civilian models and and the newer X-Carry compacts is the correct cover. Sorry if I caused you to buy the wrong sights. At least yours will be easier to return since you now know to not open the package.
|
|
|
|
Posted: 10/1/2020 7:28:46 PM EDT
[#42]
Quote HistoryQuoted: I definitely need one, so I'd absolutely be interested. I'll send you an IM. Quote HistoryQuoted: Quoted: If anyone still needs one I have a brand new X-Carry barrel. Never fired, no LCI notch I definitely need one, so I'd absolutely be interested. I'll send you an IM. He is not allowed to ship that barrel til he verifies it works in a M18 Not that I was wanting it, just wanted to know for future reference. I cannot wait to see this build done! How the progress on the FCU? |
|
|
|
Posted: 10/1/2020 7:31:31 PM EDT
[#43]
Sorry if I caused you to buy the wrong sights. At least yours will be easier to return since you now know to not open the package. You didn't cause me to buy the wrong sights, If I would have found this thread before today, you would have saved me. I found my mag well funnel on E-Bay, it is a genuine SIG part that someone removed from their pistol. I just need the correct sights for my pistol to complete it, SIG is sold out right now, but they will have them back in stock at some point. I will post a photo of my pistol when it is done (except for the sights probably), I am still waiting for the recoil spring and FCU to arrive. |
|
|
|
Posted: 10/1/2020 7:38:49 PM EDT
[#44]
Quote HistoryQuoted: The X-Carry barrel is the one to use with the Danish slide. I have purchased a Danish slide myself, here is the barrel I am using in it, PN# 1302534-R Barrel, 320XC-9 DLC, 7.67 Lock Face, Non-PT. https://www.sigsauer.com/store/barrel-p320xc-9-dlc.html Unfortunately, I have purchased the same rear sight and cover that you did and it seems to be for a Romeo sight, we need the cover for Delta Point cut. I will have to return it when it arrives. I think the rear sight cover that is used on the M-17 and M-18 civilian models and and the newer X-Carry compacts is the correct cover. I asked @coregon about that barrel and unfortunately it is a compact length barrel not a carry length barrel, won't work. So the barrel and sights seem to be the hard parts to find. |
|
|
|
Posted: 10/1/2020 7:48:14 PM EDT
[#45]
Quote HistoryQuoted: I asked @coregon about that barrel and unfortunately it is a compact length barrel not a carry length barrel, won't work. So the barrel and sights seem to be the hard parts to find. I have this same barrel, I purchased it from SIG last week and it is in my Danish slide right now. it is a 3.9" X-Carry barrel.   
|
|
|
|
Posted: 10/1/2020 7:51:29 PM EDT
[#46]
I just need to find a sight pusher to use and I'll be done with mine. (Minus the grip tape)
I feel pretty meh about the flat trigger. I can see why other people would go nuts about it, but the standard was just fine to me. The Carry grip on the other hand makes the M17/18 grip feel like garbage. I'll probably drop the mag well later so I could use the 17 round mag. |
|
|
|
Posted: 10/1/2020 8:53:50 PM EDT
[#47]
Quote HistoryQuoted: I have this same barrel, I purchased it from SIG last week and it is in my Danish slide right now. it is a 3.9" X-Carry barrel. https://i.postimg.cc/LYVpkVb6/IMG-0007.jpg https://i.postimg.cc/grYdzfxw/IMG-0008.jpg https://i.postimg.cc/5QNMsFh5/IMG-0009.jpg Thanks for the pics. I ordered one and some small parts. Now to find the correct rear sight cover and the rest should be easy. Also what height front sight is everyone using? |
|
|
|
Posted: 10/1/2020 9:58:30 PM EDT
[#48]
Quote HistoryQuoted: Thanks for the pics. I ordered one and some small parts. Now to find the correct rear sight cover and the rest should be easy. Also what height front sight is everyone using? Quote HistoryQuoted: Quoted: I have this same barrel, I purchased it from SIG last week and it is in my Danish slide right now. it is a 3.9" X-Carry barrel. https://i.postimg.cc/LYVpkVb6/IMG-0007.jpg https://i.postimg.cc/grYdzfxw/IMG-0008.jpg https://i.postimg.cc/5QNMsFh5/IMG-0009.jpg Thanks for the pics. I ordered one and some small parts. Now to find the correct rear sight cover and the rest should be easy. Also what height front sight is everyone using? I imagine it will be the same as the M18, but are you going to be running an optic? |
|
|
|
Posted: 10/1/2020 10:00:07 PM EDT
[#49]
Quote HistoryQuoted: Thanks for the pics. I ordered one and some small parts. Now to find the correct rear sight cover and the rest should be easy. Also what height front sight is everyone using? I think I may have found the correct rear sight cover for the Danish slide, I will post the part number and where to order when it comes in and I confirm it fits. The front sight should be an 8, same number as the rear. |
|
|
|
Posted: 10/1/2020 11:13:49 PM EDT
[#50]
Quote HistoryQuoted: I think I may have found the correct rear sight cover for the Danish slide, I will post the part number and where to order when it comes in and I confirm it fits. The front sight should be an 8, same number as the rear. Quote HistoryQuoted: Quoted: Thanks for the pics. I ordered one and some small parts. Now to find the correct rear sight cover and the rest should be easy. Also what height front sight is everyone using? I think I may have found the correct rear sight cover for the Danish slide, I will post the part number and where to order when it comes in and I confirm it fits. The front sight should be an 8, same number as the rear. Sounds good! Fingers crossed.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
