User Panel
User Panel
User Panel
|
Posted: 9/30/2023 1:11:20 PM EDT
[Last Edit: m24shooter]
[#1]
Quote HistoryOriginally Posted By wookie1562: http://www.m14.ca/M14_M1A_SCOUT_HAND_GUARD_SHG.html It took about a month from order to delivery but it does seem to be a quality piece. They offer a rail segment that fits into the slots. I'm not sure if an MLOK will work, let me know if I can take some measurements to better inform. The tanker front sight is 1/8" wide. It's pretty enormous, a 2 MOA RDS makes a big difference in what I can do with this rifle. @wookie1562 Yes they do make the rail, but they are not expected to (maybe) have them again until after the new year. I had ordered one with my rail, and when the rail arrived without it I asked about the rail. He said they were OOS and not expected until he started making M14 stuff again after he moved his shop. That was the timeframe he gave me. He did say the MLOK rails will work, but they have to be modified. I'm not sure exactly what has to be done, and since I took the M14.ca rail off of mine anyway I didn't get into modifying an MLOK rail. The mounting holes are pretty close, but because of how close the handguard body sits to the barrel securing the rail inside isn't easy. Not sure why he went with a proprietary design, but that's one of the things I don't like about the rail. It is a very high quality rail, and I don't think you're going to find another rail that can get things as low as this one does. That rail issue is just irritating to me when I want to mount a light or DBAL. ETA: pic thread. Barrett low pic mount with Razor Gen2E MRAD 
|
|
|
|
|
Posted: 9/30/2023 1:40:27 PM EDT
[Last Edit: Cincinnatus]
[#2]
Quote HistoryOriginally Posted By wookie1562: http://www.m14.ca/M14_M1A_SCOUT_HAND_GUARD_SHG.html It took about a month from order to delivery but it does seem to be a quality piece. They offer a rail segment that fits into the slots. I'm not sure if an MLOK will work, let me know if I can take some measurements to better inform. The tanker front sight is 1/8" wide. It's pretty enormous, a 2 MOA RDS makes a big difference in what I can do with this rifle. Quote HistoryOriginally Posted By wookie1562: Originally Posted By Gunnie357: Might I inquire as to who made that rail? It appears that one could throw an offset light with a short section of MLok I'd like to do with my similar setup. The Ultimaks been great but hard to mount a light without a third party light mount. http://www.m14.ca/M14_M1A_SCOUT_HAND_GUARD_SHG.html It took about a month from order to delivery but it does seem to be a quality piece. They offer a rail segment that fits into the slots. I'm not sure if an MLOK will work, let me know if I can take some measurements to better inform. The tanker front sight is 1/8" wide. It's pretty enormous, a 2 MOA RDS makes a big difference in what I can do with this rifle. Those are not MLok slots. They SHOULD BE. The rail sections go there. @m24shooter I might have an extra if you want it. |
|
|
|
|
Posted: 9/30/2023 7:07:25 PM EDT
[#3]
Quote HistoryOriginally Posted By m24shooter: https://www.ar15.com/media/mediaFiles/18486/IMG_4668-2964566.jpg https://www.ar15.com/media/mediaFiles/18486/IMG_4666-2964562.jpg https://www.ar15.com/media/mediaFiles/18486/IMG_4671-2964559.jpg Wild that one's an SBR and the other isn't, and their profiles are so close. That's kind of awesome. |
|
|
|
|
Posted: 10/1/2023 11:12:16 AM EDT
[#4]
Quote HistoryOriginally Posted By Cincinnatus: Those are not MLok slots. They SHOULD BE. The rail sections go there. @m24shooter I might have an extra if you want it. @Cincinnatus Thank you sir, I may take you up on that. I'm considering putting it on the EE or possibly keeping the rail and using that for an eventual Scout purchase. |
|
|
|
|
Posted: 10/1/2023 11:14:05 AM EDT
[#5]
Quote HistoryOriginally Posted By Wobblin-Goblin: That's kind of awesome. Thank you sir. |
|
|
|
|
Posted: 10/1/2023 11:18:04 AM EDT
[#6]
Quote HistoryOriginally Posted By m24shooter: @Cincinnatus Thank you sir, I may take you up on that. I'm considering putting it on the EE or possibly keeping the rail and using that for an eventual Scout purchase. Quote HistoryOriginally Posted By m24shooter: Originally Posted By Cincinnatus: Those are not MLok slots. They SHOULD BE. The rail sections go there. @m24shooter I might have an extra if you want it. @Cincinnatus Thank you sir, I may take you up on that. I'm considering putting it on the EE or possibly keeping the rail and using that for an eventual Scout purchase. Just say the word. I have an extra. |
|
|
|
|
Posted: 10/3/2023 10:04:13 PM EDT
[#7]
SHUGHART
   |
|
|
|
|
Posted: 10/3/2023 10:27:07 PM EDT
[#8]
|
|
|
|
|
Posted: 10/4/2023 5:23:17 AM EDT
[#9]
Y’all are making me drool, can’t wait to get mine!!
|
|
|
|
|
Posted: 10/4/2023 6:35:31 PM EDT
[#10]
Added a rail and a light…
|
|
|
|
|
Posted: 10/4/2023 9:24:21 PM EDT
[#11]
Quote HistoryOriginally Posted By Cincinnatus: Added a rail and a light… https://www.ar15.com/media/mediaFiles/285/B33124F3-993E-4F49-9267-8313147E21BE-2978041.jpg Nice. How's the micro prism working out on that mount? |
|
|
|
|
Posted: 10/4/2023 10:30:02 PM EDT
[#12]
Quote HistoryOriginally Posted By Cincinnatus: Added a rail and a light… https://www.ar15.com/media/mediaFiles/285/B33124F3-993E-4F49-9267-8313147E21BE-2978041.jpg Nice blaster. Those mini prism/ACOG mounts are nice. The manufacturer is supposed to be expanding (not sure just what) from what I've seen over on the M14 board. |
|
|
|
|
Posted: 10/4/2023 10:41:50 PM EDT
[#13]
Quote HistoryOriginally Posted By Cincinnatus: Added a rail and a light… https://www.ar15.com/media/mediaFiles/285/B33124F3-993E-4F49-9267-8313147E21BE-2978041.jpg That’s sharp, should be picking mine up this weekend so appreciate the solid pictures! From you all! :) |
|
|
|
|
Posted: 10/5/2023 12:06:07 AM EDT
[Last Edit: Cincinnatus]
[#14]
Quote HistoryOriginally Posted By 03RN: Nice. How's the micro prism working out on that mount? Quote HistoryOriginally Posted By 03RN: Originally Posted By Cincinnatus: Added a rail and a light… https://www.ar15.com/media/mediaFiles/285/B33124F3-993E-4F49-9267-8313147E21BE-2978041.jpg Nice. How's the micro prism working out on that mount? I dig it. Zeroed, but no time yet to really see how it is at longer ranges.… |
|
|
|
|
Posted: 10/6/2023 2:08:41 PM EDT
[#15]
Quote HistoryOriginally Posted By Cincinnatus: Added a rail and a light https://www.ar15.com/media/mediaFiles/285/B33124F3-993E-4F49-9267-8313147E21BE-2978041.jpg I'm thinking about ordering an MLOK to figure out how to modify it to fit. I may be able to put a polymer MLOK on the CNC router and open up the bolt head countersink to accept a thin nut. Then a short bolt can be screwed from the inside. May be easier to just design and 3d-print an entire new rail. |
|
|
|
|
Posted: 10/7/2023 9:50:32 AM EDT
[#16]
Quote HistoryOriginally Posted By wookie1562: Is that the m14.ca add-on rail? I'm thinking about ordering an MLOK to figure out how to modify it to fit. I may be able to put a polymer MLOK on the CNC router and open up the bolt head countersink to accept a thin nut. Then a short bolt can be screwed from the inside. May be easier to just design and 3d-print an entire new rail. Quote HistoryOriginally Posted By wookie1562: Originally Posted By Cincinnatus: Added a rail and a light https://www.ar15.com/media/mediaFiles/285/B33124F3-993E-4F49-9267-8313147E21BE-2978041.jpg I'm thinking about ordering an MLOK to figure out how to modify it to fit. I may be able to put a polymer MLOK on the CNC router and open up the bolt head countersink to accept a thin nut. Then a short bolt can be screwed from the inside. May be easier to just design and 3d-print an entire new rail. Yes. Pain in the ass, is that you have to remove the entire handguard to put on the rail section. I think it wouldn’t be too hard to modify an MLok rail, IF the screws align with the slots on the handguard. |
|
|
|
|
Posted: 10/7/2023 9:55:49 AM EDT
[Last Edit: m24shooter]
[#17]
Quote HistoryOriginally Posted By Cincinnatus: Yes. Pain in the ass, is that you have to remove the entire handguard to put on the rail section. I think it wouldn’t be too hard to modify an MLok rail, IF the screws align with the slots on the handguard. Quote HistoryOriginally Posted By Cincinnatus: Originally Posted By wookie1562: Originally Posted By Cincinnatus: Added a rail and a light https://www.ar15.com/media/mediaFiles/285/B33124F3-993E-4F49-9267-8313147E21BE-2978041.jpg I'm thinking about ordering an MLOK to figure out how to modify it to fit. I may be able to put a polymer MLOK on the CNC router and open up the bolt head countersink to accept a thin nut. Then a short bolt can be screwed from the inside. May be easier to just design and 3d-print an entire new rail. Yes. Pain in the ass, is that you have to remove the entire handguard to put on the rail section. I think it wouldn’t be too hard to modify an MLok rail, IF the screws align with the slots on the handguard. When I was looking at modding an MLOK rail, running one from the inside out was what I was think would almost have to be done because of how close the rail interior surface is to the barrel. It is a very tight fit in there. ETA: I was considering tapping a rail section to allow that. |
|
|
|
|
Posted: 10/7/2023 10:01:39 AM EDT
[#18]
Yeah, it wouldn’t take too much work to mod something. But in the end, given the angle up from, this is just a light mount.
|
|
|
|
|
Posted: 10/7/2023 2:01:01 PM EDT
[#19]
|
|
|
|
|
Posted: 10/7/2023 2:24:53 PM EDT
[#20]
Quote HistoryOriginally Posted By Cincinnatus: Yeah, it wouldn't take too much work to mod something. But in the end, given the angle up from, this is just a light mount. I'm searching for one of these surefire micro lights. As a leftie I hope the light can be reversed so it hangs off the right side of the rifle. Have an AR set up similarly with an old VTAC mount.  |
|
|
|
|
Posted: 10/7/2023 4:51:12 PM EDT
[#21]
Something to watch for with the lights, I had a 3V SF scout light in an Arisaka side mount on the M14.ca rail. Because the light was behind the front sight wings I got horrible glare off of that. With a 6V it is better, but I also am using with the VLTOR rail. I tried several combinations of mounts with the M14.ca rail and kept running into the same issue. As long as your light body and mount combination puts your light forward enough you should be fine, but with the smaller lights you can potential end up with that glare coming right back in your eyes depending on your sight and setup.
|
|
|
|
|
Posted: 10/7/2023 5:58:58 PM EDT
[#22]
That’s why you want the light forward of the front sight…
|
|
|
|
|
Posted: 10/8/2023 8:45:33 PM EDT
[#23]
Quote HistoryOriginally Posted By Cincinnatus: That’s why you want the light forward of the front sight… https://www.ar15.com/media/mediaFiles/285/555B34BF-2FAA-4CF6-A84F-422DD7D2A82C-2982832.jpg Exactly. The SF 6V and the Streamlight 6V do that, but I'm not sure about the mini light he was looking at. Haven't messed with one. |
|
|
|
KS, USA
|
Posted: 10/9/2023 11:15:50 AM EDT
[#24]
Cold Warrior
 Full thread here: https://www.ar15.com/forums/armory/Cold-War-M14-Inspired-M1A-Build-for-Living-History/6-547199/?r=-1&page=1&anc=6004536#i6004536 |
|
|
|
Posted: 10/13/2023 12:50:55 PM EDT
[#25]
|
|
|
|
|
Posted: 10/15/2023 6:56:17 AM EDT
[#26]
Doing a little work yesterday evening. Got a couple of generations together.
|
|
|
|
|
Posted: 10/27/2023 4:11:10 PM EDT
[#27]
|
|
|
|
|
Posted: 11/6/2023 8:38:37 PM EDT
[#28]
|
|
|
|
GA, USA
|
Posted: 11/14/2023 12:54:23 PM EDT
[#29]
Quote HistoryNice rifle. I know that's an Aimpoint, what model? And what rings are you using? I have a Pro I'm thinking about setting up on mine, finding rings that mount it low enough is a pain. Thanks! |
|
|
|
Posted: 11/14/2023 6:27:49 PM EDT
[#30]
Quote HistoryOriginally Posted By roninsan: Nice rifle. I know that's an Aimpoint, what model? And what rings are you using? I have a Pro I'm thinking about setting up on mine, finding rings that mount it low enough is a pain. Thanks! If you're not set on being reasonably clone-correct, ADM's AImpoint rings are the smallest I know of. I have their QD mount on my Shugart "clone" and can't recommend it enough. |
|
|
|
GA, USA
|
Posted: 11/14/2023 8:08:43 PM EDT
[#31]
Not worried about clone-correct, I have a Scout so it's not the right model anyway. Just want the scope down as low as I can get it. Thanks for the info!
|
|
|
|
Posted: 11/14/2023 8:29:47 PM EDT
[Last Edit: Cincinnatus]
[#32]
Quote HistoryOriginally Posted By roninsan: Not worried about clone-correct, I have a Scout so it's not the right model anyway. Just want the scope down as low as I can get it. Thanks for the info! I might have one of these if you want it for cheap:  I check the gear room.. |
|
|
|
|
Posted: 11/15/2023 11:31:36 AM EDT
[#33]
With the OEM mount on the PRO and a Bassett Machine base you can get pretty low. Downside is the Bassett is going to cost more than rings, probably.
 That's the Bassett Low Pic mount and the Aimpoint PRO as it comes in the box. I was looking at some ARMS or ADM rings too which I think would get it down a little more although not quite as low as an ARMS #18 and rings. But with Bassetts I can switch between a Vortex Razor and the PRO since there is no need to tie the mount to the clip slot base. |
|
|
|
|
Posted: 11/16/2023 7:44:00 PM EDT
[#34]
Red dot installed, she’s done for now
 Attached File |
|
|
|
GA, USA
|
Posted: 12/17/2023 1:43:52 PM EDT
[#35]
Where does one find the auto selector lock?
Do I replace the dummy selector from Fulton armory with the lock? |
|
|
CA, USA
|
Posted: 12/22/2023 2:28:28 AM EDT
[#36]
|
|
|
|
Posted: 2/9/2024 8:31:48 PM EDT
[#37]
 My DCM USGI M1 Garand made by International Harvester in good condition, got it way back around 1986. I also inherited my father's DCM USGI M1 Garand made by Springfield Armory at the end of WW2, it is in a better like new condition as my Garand. |
|
|
|
|
Posted: 2/14/2024 7:50:56 PM EDT
[Last Edit: SgtKiwi]
[#38]
Been wanting one since getting to play with one at Camp Lejeune in the early 90's in the matches...
Picked up a Polytech last week locally and been trying to figure out how to mount a TA55 lower than the picatinny rail/acog mount option. Remembered the AN/PVS-4 was carry handle mountable like ACOGs. Found a NOS PVS-4 M14 mount. Still need a cheek rest, but doable without. 
|
|
|
|
|
Posted: 2/14/2024 9:19:56 PM EDT
[#39]
Quote HistoryOriginally Posted By SgtKiwi: Been wanting one since getting to play with one at Camp Lejeune in the early 90's in the matches... Picked up a Polytech last week locally and been trying to figure out how to mount a TA55 lower than the picatinny rail/acog mount option. Remembered the AN/PVS-4 was carry handle mountable like ACOGs. Found a NOS PVS-4 M14 mount. Still need a cheek rest, but doable without. https://www.ar15.com/media/mediaFiles/4149/20240214_173907-3129321.jpg Nice rig. Picked up my Tanker today. Keeping it fairly close to OEM, although I do plan on having an RMR or SRO on top of an ARMS #18.  The stock definitely needs multiple days worth of tung oil applications. 
|
|
|
|
|
Posted: 2/14/2024 9:44:58 PM EDT
[#40]
Quote HistoryOriginally Posted By m24shooter: Nice rig. Picked up my Tanker today. Keeping it fairly close to OEM, although I do plan on having an RMR or SRO on top of an ARMS #18. https://www.ar15.com/media/mediaFiles/18486/IMG_5393-3129444.jpg The stock definitely needs multiple days worth of tung oil applications. https://www.ar15.com/media/mediaFiles/18486/IMG_5392-3129445.jpg Beautiful wood... I really only ever wanted one M1A... Planned on leaving it alone. I feel the start of a new addiction. I need another to "modernize" now.  |
|
|
|
|
Posted: 2/14/2024 10:07:13 PM EDT
[#41]
Quote HistoryOriginally Posted By SgtKiwi: Beautiful wood... I really only ever wanted one M1A... Planned on leaving it alone. I feel the start of a new addiction. I need another to "modernize" now. Thanks, I was curious what kind of stock I was going to end up with. When I got to the shop and opened up the case I was pleasantly surprised with the wood. Yeah, until July of last year I thought I was getting a SOCOM and that was it. That led to a Loaded, and then I wanted something kind of in the middle. So now I have three of them. I think I'm done now. But maybe not. Pic thread. 
|
|
|
|
|
Posted: 2/19/2024 9:37:25 PM EDT
[#42]
Five applications of tung oil, stock is looking better. Also added an ARMS #18 and RMR.
   
|
|
|
|
|
Posted: 3/3/2024 11:35:03 PM EDT
[#43]
Pretty fun weekend with my M1A Standard. Both of them were running shots; one at 70 yards and the other at 50.
 
|
|
|
|
|
Posted: 3/5/2024 1:13:05 PM EDT
[#44]
Quote HistoryOriginally Posted By Willisinnawoods: Pretty fun weekend with my M1A Standard. Both of them were running shots; one at 70 yards and the other at 50. https://live.staticflickr.com/65535/53566343296_400ea93ca0_b.jpg https://live.staticflickr.com/65535/53566779795_71154e6387_b.jpg  Good shots and good-lookin' stick. |
|
|
|
|
Posted: 3/12/2024 7:54:48 PM EDT
[Last Edit: ralph70bjj]
[#45]
 Attached File Attached File Attached File Attached FileI shot a 2-gun match with my April of 1943 Springfield Armory M1 on Sunday. I shot really well and actually placed first out of 23 shooters. I was the only one shooting in the M1 Garand division.  Attached File |
|
|
|
|
Posted: 3/13/2024 11:23:06 PM EDT
[#46]
Quote HistoryOriginally Posted By ralph70bjj: https://www.ar15.com/media/mediaFiles/205645/IMG_7410_jpeg-3157446.JPG https://www.ar15.com/media/mediaFiles/205645/IMG_7444_jpeg-3157452.JPG https://www.ar15.com/media/mediaFiles/205645/IMG_7443_jpeg-3157453.JPG https://www.ar15.com/media/mediaFiles/205645/IMG_7439_jpeg-3157454.JPG I shot a 2-gun match with my April of 1943 Springfield Armory M1 on Sunday. I shot really well and actually placed first out of 23 shooters. I was the only one shooting in the M1 Garand division. https://www.ar15.com/media/mediaFiles/205645/IMG_7445_jpeg-3157459.JPG Out-fucking-standing
|
|
|
|
|
Posted: 3/13/2024 11:23:25 PM EDT
[#47]
Quote HistoryOriginally Posted By ralph70bjj: https://www.ar15.com/media/mediaFiles/205645/IMG_7410_jpeg-3157446.JPG https://www.ar15.com/media/mediaFiles/205645/IMG_7444_jpeg-3157452.JPG https://www.ar15.com/media/mediaFiles/205645/IMG_7443_jpeg-3157453.JPG https://www.ar15.com/media/mediaFiles/205645/IMG_7439_jpeg-3157454.JPG I shot a 2-gun match with my April of 1943 Springfield Armory M1 on Sunday. I shot really well and actually placed first out of 23 shooters. I was the only one shooting in the M1 Garand division. https://www.ar15.com/media/mediaFiles/205645/IMG_7445_jpeg-3157459.JPG Out-fucking-standing
|
|
|
|
|
Posted: 3/16/2024 7:01:49 PM EDT
[#48]
Almost there... Aimpoint ring and MRT sling should both be here this week.
|
|
|
|
|
Posted: 3/17/2024 12:07:47 AM EDT
[#49]
Quote HistoryOriginally Posted By SgtKiwi: Almost there... Aimpoint ring and MRT sling should both be here this week. https://www.ar15.com/media/mediaFiles/4149/20240316_175742-3160908.jpg Yeah, buddy! Very practical set up. Looks kinda like my M1A with an Aimpoint. I went with an ADM low mount, a Turner AWS sling, and a Triad stock pack. |
|
|
|
|
Posted: 3/17/2024 2:58:44 PM EDT
[Last Edit: Hodgexj1996]
[#50]
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File