Figured I'd save some internet and just edit this thread
going on vacation and decided I needed a "bus gun", folks build truck and trunk guns...so why not
I got up this morning and decided I needed something other than my beloved trashcan gun
and with advise here, I spray painted stock and hand guards and then hydro dipped them(need to redo stock later, too much activater I think) and sprayed upper and some other stuff with burnt bronze cerakote....
worked on bus and then assembled, shoots great, hitting 8inch paper plates at about 25 feet with no sights, yes that is a POS china sight (wifes) and will be replaced with a 1-4 PA
1/2 turn adjustment was made on sight el/az and it works fine after a couple 30 rnd mags double tapping, so it will do what it's supposed to do
specs:
RT raw upper
RT blem lower
16" barrel kit from Denton
RRA LPK
BCG Wilson
and everything else is USA!
Firearm matches bus
installed PA 1x4 scope
Wife's build
specs:
RT raw upper
RT blem lower
16" barrel kit from Denton (light wt one)
Bushmaster LPK
BCG Wilson
and everything else is USA!
Yes pink with leopard or cheetah...and it matches the curtains IN the bus
She really likes the PA 1x4 scope, so I ordered a Red Dot and Magnifier (Friday) for mine
Happy couple
I used the home page lower build link, worked great!!!!
(all states traveling through have no issues with long guns)