User Panel
User Panel
User Panel
|
Posted: 1/3/2014 4:42:36 AM EDT
[#1]
links to receivers?
|
|
|
|
Posted: 1/3/2014 4:52:37 AM EDT
[#2]
VLTOR MUR: http://tradingplacepawn.com/vltor-mur-1a.html
Noveske N4G2: http://nwarmory.com/p-50493-noveske-n4-gen-ii-lower.aspx Noveske N4G2 Chainsaw: http://nwarmory.com/p-57741-noveske-lower.aspx Noveske N4G1 Chainsaw: http://nwarmory.com/p-58361-noveske-n4-lower-receiver-gen1.aspx |
|
|
|
Posted: 1/3/2014 4:57:21 AM EDT
[#3]
Sounds sick.
|
|
|
|
Posted: 1/4/2014 9:51:57 AM EDT
[#4]
Well I've come to a slight dilemma. I'm not sure what size barrel I want to run on this platform. I already have a 16" AR and I was going to do a 14.5" pinned but now I'm kinda thinking of doing a 18" SPR variant. I have access to both 18" and 14" Noveske SS polyrifled barrels. Which to do....
|
|
|
|
Posted: 1/4/2014 10:47:22 AM EDT
[#5]
|
|
|
|
Posted: 1/4/2014 11:59:58 AM EDT
[#6]
Quote HistoryI really wish they hadn't screwed with the design of their sights. |
|
|
|
Posted: 1/4/2014 12:04:12 PM EDT
[#7]
Quote HistoryThanks man. Ordered em on the fly for that price. From Troy directly I was looking at $220 I think so thanks for saving me $70 man for sure. Every penny saved on a build is helpful. Nobody has any input on barrel length? |
|
|
|
Posted: 1/4/2014 12:09:29 PM EDT
[#8]
Quote HistoryQuoted:
I really wish they hadn't screwed with the design of their sights. Quote HistoryQuoted:
I really wish they hadn't screwed with the design of their sights. What did they change? I have a Troy rear on my other rifle and it seems more than adequately built. |
|
|
|
Posted: 1/4/2014 1:57:27 PM EDT
[#9]
The clamping system..... new and improved.
|
|
|
|
Posted: 1/4/2014 5:06:02 PM EDT
[#10]
Quote HistoryQuoted:
The clamping system..... new and improved. So what is this new system? |
|
|
|
Posted: 1/4/2014 6:17:02 PM EDT
[#11]
Quote HistoryQuoted:
The clamping system..... new and improved. Care to explain? Didn't know they changed anything? |
|
|
|
Posted: 1/4/2014 6:21:00 PM EDT
[#12]
Quote HistoryQuoted:
Care to explain? Didn't know they changed anything? Quote HistoryQuoted:
Quoted:
The clamping system..... new and improved. Care to explain? Didn't know they changed anything? I've done some research and Troy switch their mount to a "universal mount" called the STANAG 4694 rail which is a NATO project to replace the 1913 rail still used today. The issue with the "new" Troy sights are that they don't fit on the 1913 rail correctly, as you can see by the huge gap on the left side of the rail in this photo. http://i1289.photobucket.com/albums/b507/Dave_Wray/FrontMounted2_zps03afc2ca.jpg Edit: Just checked the Troy on my Sig M400 and it also has slop in it. Not as extreme as above but slop nonetheless. http://i344.photobucket.com/albums/p351/CotyReinau/IMAG0024_zps4pkcxy0a.jpg I might dump those Troys I just bought on eBay and make some money on them. |
|
|
|
Posted: 1/5/2014 7:15:20 PM EDT
[#13]
Decided to go with a PSA LPK w/o FCG. No point in spending $90 on the DD LPK when all I need is the pins, springs, bolt catch and mag release. Going to pickup my lower tomorrow so I will have some Noveske Pr0n for you. Upper should be here Tues.
If anyone has a lead on where to find a Rainier Arms Precision Match Grade Nickel Boron BCG please let me know, I'd be very appreciative and maybe I'll send you a $10 finders fee via PayPal. 
|
|
|
|
Posted: 1/7/2014 5:02:25 PM EDT
[#14]
UPS man came today.
|
|
|
|
Posted: 1/9/2014 1:27:54 PM EDT
[#15]
Picked up my lower today.
Installed the SSA, now I'm just waiting on LPK from PSA... 
|
|
|
|
Posted: 1/9/2014 1:56:03 PM EDT
[#16]
nice
|
|
|
|
Posted: 1/9/2014 3:17:08 PM EDT
[#17]
Quote HistoryQuoted:
Decided to go with a PSA LPK w/o FCG. No point in spending $90 on the DD LPK when all I need is the pins, springs, bolt catch and mag release. Going to pickup my lower tomorrow so I will have some Noveske Pr0n for you. Upper should be here Tues. If anyone has a lead on where to find a Rainier Arms Precision Match Grade Nickel Boron BCG please let me know, I'd be very appreciative and maybe I'll send you a $10 finders fee via PayPal. I have to disagree on your LPK choice. I would NEVER buy a PSA. As for your BCG. In a quality build like that why not just go with a JP. Young's NM ? I'm putting a similar build together. Have the same upper and lower. Geissele trigger of course. Raptor. BCG will be a JP Low mass. How about a PM on the Noveske barrel source. 
|
|
|
|
Posted: 1/9/2014 3:21:15 PM EDT
[#18]
Quote HistoryQuoted:
The clamping system..... new and improved. Yea love that "new and improved" 
Wanted to use one on one of my MA10 builds. It won't even tighten up on it. Pissed me off, big time! 
|
|
|
|
Posted: 1/9/2014 4:46:57 PM EDT
[#19]
This build sounds awesome. I will have to caution you on PSA lpk.. On my PSA build the pins were jacked up! Make sure to get the premium kit and not the classic or enhanced!
Also, I would not go with Rainer bcg on a high quality build like that! Go with lmt or bcm! :) |
|
|
|
Posted: 1/9/2014 5:35:31 PM EDT
[#20]
Yeah, my PSA order hasn't even shipped. I'm gonna cancel it. As for BCG I went with a BCM auto, I don't want to wait for a Rainier to come back in stock.
Went with an Armalite LPK. |
|
|
|
Posted: 1/14/2014 11:09:59 AM EDT
[#21]
LPK came in today. Lower is GTG. Now I just gotta wait on my NSR to come in so I can ship the barrel nut, barrel and muzzle device off to ADCO as well as the upper to get the NSR index hole drilled.
And something else came today as well.
|
|
|
|
Posted: 1/14/2014 11:57:16 AM EDT
[#22]
Please im me where i can find a 14.5 stainless noveske barrel for my build :) thanks
|
|
|
|
Posted: 1/14/2014 11:59:07 AM EDT
[#23]
Looking sweet!
|
|
|
|
Posted: 1/14/2014 1:33:37 PM EDT
[#24]
The fit and finish on that upper and lower are amazing! Looks great man, keep us posted!
Jake |
|
|
|
Posted: 1/14/2014 1:40:24 PM EDT
[#25]
very nice
|
|
|
|
Posted: 1/14/2014 1:59:33 PM EDT
[#26]
Quote HistoryQuoted:
Please im me where i can find a 14.5 stainless noveske barrel for my build :) thanks Imed you. And thanks everyone. I'll keep posting as stuff comes in and it comes together. |
|
|
|
Posted: 1/14/2014 2:43:58 PM EDT
[#27]
This has like half of the parts I want to get, even though I'm undecided on some. Already have the Raptor, Gen 2 lower and SSA-E.
|
|
|
|
Posted: 1/14/2014 3:05:19 PM EDT
[#28]
Quote HistoryQuoted:
This has like half of the parts I want to get, even though I'm undecided on some. Already have the Raptor, Gen 2 lower and SSA-E. Let me know if you want info or pics or anything of the parts you are interested in. I'd be glad to share. |
|
|
|
Posted: 1/14/2014 3:46:34 PM EDT
[#29]
Quoted:
Quoted:
This has like half of the parts I want to get, even though I'm undecided on some. Already have the Raptor, Gen 2 lower and SSA-E. Let me know if you want info or pics or anything of the parts you are interested in. I'd be glad to share. Thanks man. I'm not exactly sure what i'm doing for rail and barrel yet, but I'm thinking UBR and MUR for sure. I was worried that the MUR and Gen 2 lower wouldn't match that well like I've seen a few times, but yours looks really good. I'm anxious to see what it looks like with the NSR on it. I was always leaning towards a DD Lite rail or some sort of quad rail, but the more i look at the NSRs the more I like them, plus I'm thinking it would probably be more practical for me. |
|
|
|
Posted: 1/14/2014 4:58:23 PM EDT
[#30]
Sweet setup right there
|
|
|
|
Posted: 1/14/2014 5:40:30 PM EDT
[#31]
Thats exactly how i wanna start my SBR. Noveske Gen II Lower with a Vltor Upper. Do you have any issues with your PMAGS in that lower?
|
|
|
|
Posted: 1/14/2014 7:47:01 PM EDT
[#32]
Quote HistoryQuoted:
Thats exactly how i wanna start my SBR. Noveske Gen II Lower with a Vltor Upper. Do you have any issues with your PMAGS in that lower? No problems in mine. 
|
|
|
|
Posted: 1/15/2014 2:12:13 AM EDT
[#33]
|
|
|
|
Posted: 1/15/2014 8:11:38 AM EDT
[#34]
high end might be a bit of an understatement but looks good none the less
|
|
|
|
Posted: 1/15/2014 12:47:19 PM EDT
[#35]
Quote HistoryQuoted:
high end might be a bit of an understatement but looks good none the less Whatcha mean understatement? 
|
|
|
|
Posted: 1/16/2014 6:32:41 PM EDT
[#36]
Moar shipments in.
Now I basically have everything but my Aimpoint in, which is on backorder so we can finally get this rifle together.... after I ship my barrel, flash hider and upper to Steve at ADCO tomorrow...
I'm really happy I went with the NSR, this rail is like.. air... literally there is no weight at all. I think my plastic MOE forend on my other rifle is heavier.. Also got myself some Lancer L5 AWM's.. very impressed so far, don't like how you gotta slam it home with 30rds on a closed bolt though. |
|
|
|
Posted: 1/16/2014 6:43:10 PM EDT
[#37]
Awesome build! Awesome Thread!
|
|
|
|
Posted: 1/16/2014 6:44:36 PM EDT
[#38]
Quote HistoryQuoted:
Awesome build! Awesome Thread! Thanks. Not bad for a 13'er? 
|
|
|
|
Posted: 1/16/2014 7:08:56 PM EDT
[#39]
Very nice
|
|
|
|
Posted: 1/20/2014 7:42:54 PM EDT
[#40]
Well guys... I got my hands on another unicorn.. I have a Noveske MUR in bound. It is a chainsaw, but I don't care.. The Noveske MUR looks so much better with the NSR. Gonna have the other MUR going up on the EE here pretty soon.
|
|
|
|
Posted: 1/20/2014 8:30:30 PM EDT
[#41]
Quote HistoryQuoted:
Let me know if you want info or pics or anything of the parts you are interested in. I'd be glad to share. Quote HistoryQuoted:
Quoted:
This has like half of the parts I want to get, even though I'm undecided on some. Already have the Raptor, Gen 2 lower and SSA-E. Let me know if you want info or pics or anything of the parts you are interested in. I'd be glad to share. First nice builds and good parts. Can any one tell me where to get the Bolt catch that looks like that, or do I have to order straight from Armalite. I don't buy LPK as I always put in Wilson combat triggers or Geissele's and BadCass selectors, so I like to order parts separate. I see on Primary Arms site that there is one that looks like that but its made by DSA and I am not sure about there quality, Although most parts are only made buy a few companys and the bought up by these resellers. Thanks. |
|
|
|
Posted: 1/21/2014 10:22:15 AM EDT
[#42]
Quote HistoryQuoted:
First nice builds and good parts. Can any one tell me where to the the Bolt catch that looks like that, or do I have to order straight from Armalite. I don't buy LPK as I always put in Wilson combat triggers or Geissele's and BadCass selectors, so I like to order parts separate. I see on Primary Arms site that there is one that looks like that but its made by DSA and I am not sure about there quality, Although most parts are only made buy a few companys and the bought up by these resellers. Thanks. Quote HistoryQuoted:
Quoted:
Quoted:
This has like half of the parts I want to get, even though I'm undecided on some. Already have the Raptor, Gen 2 lower and SSA-E. Let me know if you want info or pics or anything of the parts you are interested in. I'd be glad to share. First nice builds and good parts. Can any one tell me where to the the Bolt catch that looks like that, or do I have to order straight from Armalite. I don't buy LPK as I always put in Wilson combat triggers or Geissele's and BadCass selectors, so I like to order parts separate. I see on Primary Arms site that there is one that looks like that but its made by DSA and I am not sure about there quality, Although most parts are only made buy a few companys and the bought up by these resellers. Thanks. It is an Armalite bolt catch/release. They sell an LPK less the FCG but not sure about individual pieces. |
|
|
|
Posted: 1/21/2014 11:01:58 PM EDT
[#43]
DSG Arms sells individual Armalite pieces. Bought the same bolt catch from them.
Armalite AR15 Bolt Catch In stock too |
|
|
|
Posted: 1/24/2014 1:39:14 PM EDT
[#44]
Aimpoint came today. I love Larue so much.. you buy an optic and get a bunch of freebies.
I got my Noveske MUR Chainsaw today. It completely perfect except for a small dent in the shell deflector, which I probably would have eventually had happen myself, so no biggie. 
Monday the barrel will be here and I will get this build finished.
|
|
|
|
Posted: 3/24/2014 6:40:22 PM EDT
[#45]
Awesome build. Any update?
|
|
|
|
Posted: 3/25/2014 3:15:24 PM EDT
[#46]
Im jealous you are allowed to have 30 round mags... oh wait ....almost everyone can except NY.....
|
|
|
|
Posted: 3/25/2014 3:31:17 PM EDT
[#47]
awesome build. Im hoping to slowly put one together very similar to this. Hopefully well see some finished pictures soon
|
|
|
|
Posted: 3/25/2014 4:56:28 PM EDT
[#48]
Great build! Almost exactly like one I did during the height of the craziness. Only differences were that I had a FailZero BCG, Norgon mag release and a Geissele SD-E. One suggestion though. Ditch the UBR. It is cool, and its the "most expensive" (and I had one too) but it just turned your build into a hippo. You have a lightweight front end and a cement truck on the rear. The minute I switched over to a CTR, the rifle hit "Holy Grail" status.
In the end, as long as you are happy with what you are assembling, that's all the matters. Here's how mine turned out.  |
|
|
|
Posted: 3/26/2014 5:50:51 AM EDT
[#49]
Great stick
where did you find an 18" Noveske Barrle? I have been looking for months |
|
|
|
Posted: 3/26/2014 7:01:23 AM EDT
[#50]
Curious how tight your upper and lower are. My MUR and Gen2 lower are so tight that I have to use my Glock tool to push the rear pin out.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
