User Panel
User Panel
User Panel
UT, USA
|
Posted: 5/29/2013 1:02:44 PM EDT
[#1]
href=http://imageshack.us/a/img23/3982/photo4fu.jpg" />
href=http://imageshack.us/a/img542/4906/photo2pwc.jpg" /> First Build nearly done. |
|
|
|
Posted: 5/30/2013 12:43:14 AM EDT
[#2]
Originally Posted By raidersrule:
http://<a href=http://imageshack.us/a/img23/3982/photo4fu.jpg</a>" /> http://<a href=http://imageshack.us/a/img542/4906/photo2pwc.jpg</a>" /> First Build nearly done. Nice rifle! Are you waiting on an oversized trigger guard? If not I've got an extra standard one I can send you. Just shoot me your address in an IM. |
|
|
|
VA, USA
|
Posted: 5/30/2013 10:25:23 AM EDT
[#3]
Originally Posted By raidersrule:
http://<a href=http://imageshack.us/a/img23/3982/photo4fu.jpg</a>" /> http://<a href=http://imageshack.us/a/img542/4906/photo2pwc.jpg</a>" /> First Build nearly done. I love the Raiders emblem! Where did you get that done? |
|
|
UT, USA
|
Posted: 5/30/2013 1:26:38 PM EDT
[#4]
Originally Posted By bassman81:
Originally Posted By raidersrule:
http://<a href=http://imageshack.us/a/img23/3982/photo4fu.jpg</a>" /> http://<a href=http://imageshack.us/a/img542/4906/photo2pwc.jpg</a>" /> First Build nearly done. I love the Raiders emblem! Where did you get that done? Shadow Ops...it was part of a pre order with graphics done for free! |
|
|
MO, USA
|
Posted: 5/31/2013 9:52:33 PM EDT
[Last Edit: Jarreau]
[#5]
Here's my first and probably last build. This definitely got expensive.
Upper: Vltor MUR-1A Del-ton 16" chromed lined M4 barrel Troy MRF-R 12" rail Midwest Industries LP gas block Badger Ordnance full ambi charging handle Primary Weapons FCS556 SWI nickel BCG Lower: AXTS AX556 Magpul UBR Wilson Combat TTU stage 1 trigger CAA grip Battle Arms ambi safety Accessories: EOTech HHS I Mako Group(FAB Defense) G2 T-Pod Troy battle rail covers Lancer L5 AWM 30rd magazines Ergo rail ladder covers http://i1287.photobucket.com/albums/a625/jbeanzboy/20130530_200038_zpsd12d6ef0.jpg http://i1287.photobucket.com/albums/a625/jbeanzboy/20130530_200132_zps6ab39f8f.jpg http://i1287.photobucket.com/albums/a625/jbeanzboy/20130530_200024_zps7ef841ca.jpg |
|
|
|
Posted: 5/31/2013 10:28:01 PM EDT
[Last Edit: picklz]
[#6]
Finally finished my build, haven't had a chance to shoot her yet but hopefully in the next week or two. Much thanks to the helpful people on this site!
YHM Lower LRB Upper RRA LPK YM Chrome BCG Ranier Select 16" Barrel Ranier Low Profile Gas Block Troy BattleRail Bravo Magpul AFG Magpul ACS Stock CAA Pistol Grip BattleComp 1.0 Primary Arms MultiRet Red Dot Sight Primary Arms 3x Long Eye relife magnifier American Defense swing mount Still need to pickup some BUIS/MBUS but otherwise I'm pretty happy w/ it! Only good pic I have so far, with the family. (and yes I'm aware, the safety wasn't on in that pic :p ) 
|
|
|
|
MO, USA
|
Posted: 5/31/2013 10:51:46 PM EDT
[#7]
Badass man!... How are you liking the CAA Grip? Best grip I've used
|
|
|
|
Posted: 5/31/2013 11:31:22 PM EDT
[#8]
Hot damn!! I do want one of those AXTS Lowers so they get caught up I should be caught up on the $$ and I'm going for it..........
|
|
|
|
MO, USA
|
Posted: 5/31/2013 11:37:55 PM EDT
[#9]
Both my upper and lower were hard finds. The ban scare has everything sold out. Last i checked the AX556 is on backorder for 90-120 days. I got lucky and someone let me get it off a complete build. Check armslist and maybe you can score one. To me, it was worth the money
|
|
|
|
Posted: 5/31/2013 11:52:49 PM EDT
[#10]
Originally Posted By Jarreau:
Badass man!... How are you liking the CAA Grip? Best grip I've used Haven't shot it yet but from handling/playing around with it at the house I really dig it, we'll see how it does at the range. I also had a hard time finding parts, many hours watching the in-stock threads and a couple months later I managed to come up with all the parts, only part I paid a little bit of a premium for was the barrel, everything else I feel I made out pretty well on. |
|
|
|
MO, USA
|
Posted: 6/1/2013 12:06:20 AM EDT
[#11]
I got decent prices as well. It took some searching on making sure I got real parts, not knockoffs or airsoft crap. I plan on getting a new BCG. it wasn't my first choice. All in all Im damn happy with it. Dont plan on selling even if im dead broke!
|
|
|
|
Posted: 6/1/2013 3:10:06 AM EDT
[#12]
Okay took some high res pictures and used my fiancé's studio to promote AR15.com a little with my newest build.
|
|
|
|
AZ, USA
|
Posted: 6/1/2013 8:14:34 PM EDT
[Last Edit: sanausnol]
[#13]
Well I finally finished my Umbrella Corp build (still waiting on the grip from ROGTAC).
Specs: Umbrella HUUCR lower Umbrella HUUCR upper BAD ASS ambi safety (not shown in pics, installed aftwerward) BCM Gunfighter Charging Handle Mossberg 16" 5.56 barrel,1/7 twist Fortis REV 12" rail Parralax Tactical Paracomp Compensator Magpul STR Optic is Sightmark Ultrashot QD Sorry for the crappy phone pics. 
|
|
|
AK, USA
|
Posted: 6/1/2013 8:35:04 PM EDT
[#14]
Originally Posted By sanausnol:
Well I finally finished my Umbrella Corp build (still waiting on the grip from ROGTAC). Specs: Umbrella HUUCR lower Umbrella HUUCR upper BAD ASS ambi safety (not shown in pics, installed aftwerward) BCM Gunfighter Charging Handle Mossberg 16" 5.56 barrel,1/7 twist Fortis REV 12" rail Parralax Tactical Paracomp Compensator Magpul STR Optic is Sightmark Ultrashot QD Sorry for the crappy phone pics. how do you like the fortis forend? ive been looking at one pretty seriously |
|
|
AZ, USA
|
Posted: 6/1/2013 9:16:01 PM EDT
[#15]
Originally Posted By frankenstien:
Originally Posted By sanausnol:
Well I finally finished my Umbrella Corp build (still waiting on the grip from ROGTAC). Specs: Umbrella HUUCR lower Umbrella HUUCR upper BAD ASS ambi safety (not shown in pics, installed aftwerward) BCM Gunfighter Charging Handle Mossberg 16" 5.56 barrel,1/7 twist Fortis REV 12" rail Parralax Tactical Paracomp Compensator Magpul STR Optic is Sightmark Ultrashot QD Sorry for the crappy phone pics. how do you like the fortis forend? ive been looking at one pretty seriously I actually really like it, it is definitely the lightest rail I have ever used and it pretty compact over the barrel which is nice. I would definitely recommend it. |
|
|
KY, USA
|
Posted: 6/1/2013 11:37:04 PM EDT
[#16]
Originally Posted By jeffyo45:
http://img.photobucket.com/albums/v304/jeffyo45/1581357_04_custom_ar_15_640.jpg http://img.photobucket.com/albums/v304/jeffyo45/1581357_03_custom_ar_15_640.jpg A couple of builds I finished in the last couple weeks. First is a Seekins lower with a Aero upper. Has a ARPerfomance 223 Wylde barrel. Finished off with a Samson Evolution handguard which I really like. I will use one again for sure. It's a shooter so far. My first build I did totally from scratch so I was thrilled. I think your castle nut is on backwards |
|
|
|
Posted: 6/2/2013 11:23:16 AM EDT
[#17]
waiting on XTC brake and irons but she is finally finished
BCM Blem Upper BCM 16" BHF middy BCM Lopro gas block BCM BCG BCM Mod4 CH Fortis 12" rev rail (wow i didn't know how light this was) Mega Arms gator lower battle arms ambi safety BCM FCG DD lower parts kit Magpul CTR Milspec buffer tube kit BCM Mod 1 grip Magpul asap 
|
|
|
|
MI, USA
|
Posted: 6/2/2013 2:44:27 PM EDT
[Last Edit: buddyleesvsu]
[#18]
delete
|
|
|
MI, USA
|
Posted: 6/2/2013 2:50:23 PM EDT
[#19]
My first build.
Specs: BCM BFH 16" Mid Length Upper Receiver Group Centurion Arms C4 12" Handguard MagPul XTM Enhanced rail covers with angled Magpul foregrip YM Chrome BCG Ranier Arms Raptor charging handle Seekins forged stripped lower RRA parts kit Magpul trigger guard Hogue grip Vltor Emod stock Troy folding BUIS Aimpoint Pro http://i1278.photobucket.com/albums/y513/buddyleesvsu/AR15-003_zps36553eb2.jpg http://i1278.photobucket.com/albums/y513/buddyleesvsu/AR15-002_zpsb5fd3299.jpg http://i1278.photobucket.com/albums/y513/buddyleesvsu/AR15-001_zps105ba6dd.jpg |
|
|
|
Posted: 6/2/2013 9:39:23 PM EDT
[#20]
Just finished building her Friday.
Giessllie in her. I already want to start another one... 
|
|
|
|
FL, USA
|
Posted: 6/2/2013 10:07:13 PM EDT
[#21]
|
|
|
|
Posted: 6/3/2013 3:47:45 PM EDT
[#22]
Originally Posted By kered:
<a href="http://s55.photobucket.com/user/dj802005/media/IMG_20130529_143255_124.jpg.html" target="_blank">http://i55.photobucket.com/albums/g136/dj802005/IMG_20130529_143255_124.jpg</a> <a href="http://s55.photobucket.com/user/dj802005/media/2013-02-25_23-34-55_206.jpg.html" target="_blank">http://i55.photobucket.com/albums/g136/dj802005/2013-02-25_23-34-55_206.jpg</a> love it! about the size of a laptop case?? |
|
|
|
FL, USA
|
Posted: 6/3/2013 5:03:13 PM EDT
[#23]
Yup it actually is a pelican laptop case. Happen to stumble across the case on clearance and it ended up fitting perfect
|
|
|
FL, USA
|
Posted: 6/3/2013 6:10:22 PM EDT
[Last Edit: WingsFan86]
[#24]
I've been building this gun for about a year and it's finally time to shoot.
First AR, First Build. Next is optics.
Whoops, safety is not on. Mag is empty. - Detroit Gun Works Lower & Upper - Daniel Defense Lite Rail 12.0 - Daniel Defense 16" Mid-Length Govt. Profile Barrel - Daniel Defense BCG - Stag LPK - Spikes ST-T2 and Blue Sprinco Spring - Magpul UBR (OD Green) - Magpul RVG (OD Green) - YHM Phantom Flash Hider - Daniel Defense Fixed Sights - Badger Ordnance Tactical Latch 
|
|
|
MN, USA
|
Posted: 6/4/2013 10:56:34 AM EDT
[#25]
Finished this one last night. My first and likely not my last pistol build. I will go with a shorter barrel or longer handguard next time.
Upper: Seekins SP223 Receiver Rainier Match 300 Blackout 10.5" 1/8 Twist Barrel PRI Adjustable Gas Block Rainier Xtreme Tactical Muzzle Brake AR-Matey BCG BCM Gunfighter CH YHM Carbine Length Handguard Lower: CMT Billet Receiver Phase 5 Pistol Buffer Kit ALG QMS Trigger Umbrella Grip http://img.photobucket.com/albums/v304/jeffyo45/IMG_20130603_231726281013213.jpg http://img.photobucket.com/albums/v304/jeffyo45/IMG_20130603_231614-1067464395.jpg http://img.photobucket.com/albums/v304/jeffyo45/IMG_20130603_2315451233974722.jpg http://img.photobucket.com/albums/v304/jeffyo45/IMG_20130603_2314402036805404.jpg |
|
|
VA, USA
|
Posted: 6/4/2013 11:17:46 AM EDT
[#26]
Man, that's sweet!
|
|
|
|
Posted: 6/4/2013 11:31:43 AM EDT
[#27]
Originally Posted By kered:
<a href="http://s55.photobucket.com/user/dj802005/media/IMG_20130529_143255_124.jpg.html" target="_blank">http://i55.photobucket.com/albums/g136/dj802005/IMG_20130529_143255_124.jpg</a> <a href="http://s55.photobucket.com/user/dj802005/media/2013-02-25_23-34-55_206.jpg.html" target="_blank">http://i55.photobucket.com/albums/g136/dj802005/2013-02-25_23-34-55_206.jpg</a> nice pistol 
|
|
|
|
|
Posted: 6/4/2013 12:59:32 PM EDT
[#28]
For all the crap you '13ers take. I gotta say, I'm kinda proud of you guys, at least the ones that have posted build pix here. You guys definitely got some skillz!
Keep up the good work! Ruckus |
|
|
|
OH, USA
|
Posted: 6/4/2013 2:08:51 PM EDT
[#29]
My build/assembly in progress. I'm gonna cross post this in every thread that it is relevant in, because I'm super excited. Just waiting on some tools to come in so I can take it all apart and put it all back together. Lower: •Noveske Gen 2 lower •PSA lpk •Magpul STR stock •BADASS safety selector •Noveske takedown and pivot pins •Magpul MOE-K grip •KNS anti rotation pins Upper: •BCM BFH 14.5 lightweight mid length •Battlecomp 1.5 •Noveske NSR 13.5 •BCM bcg •BCM mod 4 charging handle ***Still need to get an optic. I'm thinking of getting an ACOG. I need to chop the fsb down to fit under the NSR, and take off the stock barrel nut and replace it with the NSR barrel nut. Shouldn't be too difficult once I get the taper pins out. Also need to pin and weld the BC1.5, and Duracoat the upper receiver and NSR. Shouldn't be bad at all. I have access to a mill, a press, and MIG and TIG welders. **P.S. --Before the Internet foil hat guys comment on the currently unpinned flash hider, I have a registered AR15 SBR, so I am not breaking any laws by possessing this upper. |
|
|
AZ, USA
|
Posted: 6/4/2013 2:44:08 PM EDT
[#30]
Originally Posted By Just_Tom:
My build/assembly in progress. I'm gonna cross post this in every thread that it is relevant in, because I'm super excited. Just waiting on some tools to come in so I can take it all apart and put it all back together. Lower: •Noveske Gen 2 lower •PSA lpk •Magpul STR stock •BADASS safety selector •Noveske takedown and pivot pins •Magpul MOE-K grip •KNS anti rotation pins Upper: •BCM BFH 14.5 lightweight mid length •Battlecomp 1.5 •Noveske NSR 13.5 •BCM bcg •BCM mod 4 charging handle ***Still need to get an optic. I'm thinking of getting an ACOG. I need to chop the fsb down to fit under the NSR, and take off the stock barrel nut and replace it with the NSR barrel nut. Shouldn't be too difficult once I get the taper pins out. Also need to pin and weld the BC1.5, and Duracoat the upper receiver and NSR. Shouldn't be bad at all. I have access to a mill, a press, and MIG and TIG welders. **P.S. --Before the Internet foil hat guys comment on the currently unpinned flash hider, I have a registered AR15 SBR, so I am not breaking any laws by possessing this upper. New here, so I have some questions as it's obvious you know what you're doing. 1) Why didn't you just get a low-pro gas block to begin with? Did the FSB come with the barrel? 2) What is that diagonal line thingy that is an inch forward of your safety selector? |
|
|
OH, USA
|
Posted: 6/4/2013 7:42:31 PM EDT
[#31]
Originally Posted By Leudast:
Originally Posted By Just_Tom:
My build/assembly in progress. I'm gonna cross post this in every thread that it is relevant in, because I'm super excited. Just waiting on some tools to come in so I can take it all apart and put it all back together. Lower: •Noveske Gen 2 lower •PSA lpk •Magpul STR stock •BADASS safety selector •Noveske takedown and pivot pins •Magpul MOE-K grip •KNS anti rotation pins Upper: •BCM BFH 14.5 lightweight mid length •Battlecomp 1.5 •Noveske NSR 13.5 •BCM bcg •BCM mod 4 charging handle ***Still need to get an optic. I'm thinking of getting an ACOG. I need to chop the fsb down to fit under the NSR, and take off the stock barrel nut and replace it with the NSR barrel nut. Shouldn't be too difficult once I get the taper pins out. Also need to pin and weld the BC1.5, and Duracoat the upper receiver and NSR. Shouldn't be bad at all. I have access to a mill, a press, and MIG and TIG welders. **P.S. --Before the Internet foil hat guys comment on the currently unpinned flash hider, I have a registered AR15 SBR, so I am not breaking any laws by possessing this upper. New here, so I have some questions as it's obvious you know what you're doing. 1) Why didn't you just get a low-pro gas block to begin with? Did the FSB come with the barrel? 2) What is that diagonal line thingy that is an inch forward of your safety selector? I wanted the FSB because theycome already pinned to the barrel with taper pins, and that is the most secure way to attach a gas block. I could've gotten a Lo pro gas block and drilled it, reamed it and pinned it myself, but it saves me some work if I just buy a complete upper and take it apart and rebuild it. The "diagonal line thingies" (no ball busting intended, everybody has to learn from somewhere) are KNS anti rotation pins. They keep the hammer pin from rotating, which will eventually make the hole in the lower egg shaped. Most people say you don't need them unless you are shooting full auto, which I won't be, but they are only $35 and they are cheap insurance from possibly ruining an expensive lower. |
|
|
|
Posted: 6/4/2013 8:03:38 PM EDT
[#32]
It's going to be kinda hard to do with a pinned FH don't ya think?? I maybe wrong here because I don't know what the NSR barrel nut looks like.
|
|
|
|
|
Posted: 6/4/2013 8:15:19 PM EDT
[#33]
Originally Posted By GoRebels:
It's going to be kinda hard to do with a pinned FH don't ya think?? I maybe wrong here because I don't know what the NSR barrel nut looks like. Reading is fundamental. He stated he still needed to pin the FH. 
|
|
|
|
|
Posted: 6/4/2013 8:17:35 PM EDT
[#34]
Originally Posted By rhaney02:
Originally Posted By GoRebels:
It's going to be kinda hard to do with a pinned FH don't ya think?? I maybe wrong here because I don't know what the NSR barrel nut looks like. Reading is fundamental. He stated he still needed to pin the FH. Silly rabbit Reading is for Faggots!!!  You been here long enough to know that...........
|
|
|
|
NV, USA
|
Posted: 6/4/2013 8:37:10 PM EDT
[#35]
Why would you need to pin the FH if you have a registered SBR?
|
|
|
|
Posted: 6/4/2013 8:54:16 PM EDT
[#36]
Originally Posted By Boost3dx:
Why would you need to pin the FH if you have a registered SBR? You don't he added that after my non reading ass posted my question 
|
|
|
|
OH, USA
|
Posted: 6/4/2013 9:10:35 PM EDT
[#37]
Originally Posted By Boost3dx:
Why would you need to pin the FH if you have a registered SBR? Because I'm not registering this lower. If the gooberment ever wanted to take guns away, I'd think they'd start with NFA items that are all registered to a specific person and address. They know exactly where all of those guns are at, and they can't just be lost in a tragic boating accident. I have my registered SBR, and now I'd like a gun that isn't registered. Not that i think they will ever take guns away, or that I have any need for an "unregistered" gun, I just dont feel i should have all my eggs in one basket. Make sense? My SBR is my only other AR15. Yes, that's right, my first AR is an SBR. When I do something, I do it right. Haha. |
|
|
|
Posted: 6/4/2013 9:29:14 PM EDT
[#38]
Originally Posted By Just_Tom:
Originally Posted By Boost3dx:
Why would you need to pin the FH if you have a registered SBR? Because I'm not registering this lower. If the gooberment ever wanted to take guns away, I'd think they'd start with NFA items that are all registered to a specific person and address. They know exactly where all of those guns are at, and they can't just be lost in a tragic boating accident. I have my registered SBR, and now I'd like a gun that isn't registered. Not that i think they will ever take guns away, or that I have any need for an "unregistered" gun, I just dont feel i should have all my eggs in one basket. Make sense? My SBR is my only other AR15. Yes, that's right, my first AR is an SBR. When I do something, I do it right. Haha. I like the way you jive turkey!! Is that BCM upper the socom or just standard M4?? I want it!!
|
|
|
|
|
Posted: 6/4/2013 10:14:31 PM EDT
[#39]
Still needs a flashlight + mount, VFG of some sort, and a BUIS. I'll finish eventually
|
|
|
|
MI, USA
|
Posted: 6/5/2013 12:10:00 AM EDT
[#40]
My build in progress:
Seekins billet upper/lower ALG ACT trigger Magpul ACS stock Spikes buffer kit BCM mod 1 grip KNS ST anti rotational pins (FDE) be here this week To order: Rainier ultra-match 18" barrel (intermediate) JP lightweight BCG Raptor charging handle 
|
|
|
MD, USA
|
Posted: 6/5/2013 3:15:17 AM EDT
[#41]
I took a group photo earlier, so I might as well post it here.
Top to bottom: PSA/AP 8.2" Noveske 300BLK CAV-15/Mega 16" Noveske 300 BLK Mega/Mega 16" Centurion 5.56 |
|
|
OH, USA
|
Posted: 6/5/2013 3:30:52 AM EDT
[#42]
Originally Posted By GoRebels:
Originally Posted By Just_Tom:
Originally Posted By Boost3dx:
Why would you need to pin the FH if you have a registered SBR? Because I'm not registering this lower. If the gooberment ever wanted to take guns away, I'd think they'd start with NFA items that are all registered to a specific person and address. They know exactly where all of those guns are at, and they can't just be lost in a tragic boating accident. I have my registered SBR, and now I'd like a gun that isn't registered. Not that i think they will ever take guns away, or that I have any need for an "unregistered" gun, I just dont feel i should have all my eggs in one basket. Make sense? My SBR is my only other AR15. Yes, that's right, my first AR is an SBR. When I do something, I do it right. Haha. I like the way you jive turkey!! Is that BCM upper the socom or just standard M4?? I want it!!It's a lightweight profile barrel, hammer forged. This gun may end up being lighter than my SBR... |
|
|
NC, USA
|
Posted: 6/5/2013 7:28:11 AM EDT
[Last Edit: TiminNC]
[#43]
Got some more lowers finished ... now I need to figure out what uppers to go with ...
|
|
|
|
Posted: 6/6/2013 9:11:04 AM EDT
[#44]
Here's the beginning of my Reece just waiting on parts to come in stock.............
|
|
|
|
AL, USA
|
Posted: 6/6/2013 1:55:49 PM EDT
[Last Edit: urwrldn3d]
[#45]
Just finished her on Saturday. Here she is next to her brother from another mother.
Specs: BCM 16" Std. w 13" VTAC Spike's Phosphate BCG Gunfighter Mod4 CH Troy Folding Battle Sights SAA Lower DPMS LPK (Minus Trigger Group, Grip, Trigger Guard) Magpul Aluminum Trigger Guard BCM Pistol Grip MOD0 BCM Receiver Extension, spring, H Buffer and Castle Nut Magpul CTR (Milspec) Magpul ASAP ALG Defense Combat Trigger (ACT) |
|
|
IN, USA
|
Posted: 6/6/2013 3:10:17 PM EDT
[#46]
Originally Posted By TiminNC:
Got some more lowers finished ... now I need to figure out what uppers to go with ... http://i861.photobucket.com/albums/ab179/Tim_in_NC/Lowers_zpsb4280928.jpg Tim that Noveske Gen2 is ruined! You should send it to me for PROPPER disposal 
Nice lot! Btw it's nice to meet a fellow UBR hoarder
|
|
|
NC, USA
|
Posted: 6/6/2013 4:38:44 PM EDT
[#47]
Originally Posted By BBar605:
Originally Posted By TiminNC:
Got some more lowers finished ... now I need to figure out what uppers to go with ... http://i861.photobucket.com/albums/ab179/Tim_in_NC/Lowers_zpsb4280928.jpg Tim that Noveske Gen2 is ruined! You should send it to me for PROPPER disposal
Nice lot! Btw it's nice to meet a fellow UBR hoarder  HAHA ... Thanks man ... I have a sickness, can't stop buying and building these things ... And yes, I love the UBR Stock System !!! Thanks again for the kind words, Tim
|
|
|
OK, USA
|
Posted: 6/6/2013 7:16:49 PM EDT
[#48]
href=http://i1278.photobucket.com/albums/y513/NoRecoil77/2013-05-26_22-17-05_2871_zpsd8b0512b.jpg" />
href=http://i1278.photobucket.com/albums/y513/NoRecoil77/8c37cc99-d328-4694-9222-da3d8b3a74d6_zpsd67c0c08.jpg" /> CMMG Lower Wilson 1X9 16" barrel Quad Front Rail Alum VFG SureFire 6P w/ redneck Weaver mount BTE gas block UTG CQB Red/Green dot Magpul MOE + (currently replaced w/ Pachmayr original) |
|
|
|
Posted: 6/6/2013 10:39:12 PM EDT
[#49]
finished
|
|
|
|
TX, USA
|
Posted: 6/7/2013 12:01:52 AM EDT
[#50]
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
