User Panel
User Panel
User Panel
VA, USA
|
Posted: 3/2/2014 7:51:29 PM EDT
[Last Edit: CtSmshr]
[#1]
DAPAGE...OWNTIT
|
|
|
|
Posted: 3/2/2014 8:18:47 PM EDT
[Last Edit: AR45fan]
[#2]
Finally started mine today. Magpul "enhanced" trigger guard is in the mail. End plate is a DD QD version. I just need to decide on a tube. Then I will be able to slap any of my SBR uppers on it and travel.
|
|
|
|
AZ, USA
|
Posted: 3/2/2014 8:22:56 PM EDT
[#3]
Quentin Defense Forged Lower
LPK from Omega Rainier Arms Forged Upper w/o Forward Assist Rainier Arms BCG FN 10.5 Moly Chrome Barrel 1:7 BCM Gunfighter CH Mod 4 Troy Alpha Rail 11 inch Troy Claymore Brake DSC Pistol Buffer Tube w/ EM rubber Low profile gas block Custom Dust Cover Vortex Strikefire Red/Green Dot Magpul MBUS gen 2 Magpul BAD Lever Magpul MOE K2 Seekins Trigger Guard Seekins Mag Release (Sorry for the crappy camera phone pics) 
|
|
|
WA, USA
|
Posted: 3/3/2014 12:08:07 AM EDT
[#4]
I just put this together. Aero precision upper and lower in burnt bronze. 7.5'' barrel I dont like how big the vortex strikefire is on there so I have a SPARC that is going to be here this week to replace it. |
|
|
MD, USA
|
Posted: 3/3/2014 8:31:13 AM EDT
[#5]
Quote HistoryOriginally Posted By jmr73188:
http://img.photobucket.com/albums/v128/tricked03cocker/4f0d1517-407d-4438-b359-1324dcaef923_zps6b30fd9c.jpg I just put this together. Aero precision upper and lower in burnt bronze. 7.5'' barrel I dont like how big the vortex strikefire is on there so I have a SPARC that is going to be here this week to replace it. Awesome. I love those aero uppers. Nice stick jmr! |
|
|
|
Posted: 3/3/2014 9:01:03 AM EDT
[#6]
Quote HistoryOriginally Posted By CtSmshr:
DAPAGE...OWNTIT http://i1285.photobucket.com/albums/a584/GudOlBoy1/PicsArt_1393807603081_zps6bd6640f.jpg Nice photo |
|
|
|
|
Posted: 3/3/2014 9:03:14 AM EDT
[#7]
Quote HistoryOriginally Posted By Rickyd217:
my mk18 pistol....almost complete. have a pair of mbus pro's and a dhal i2 on the way http://i742.photobucket.com/albums/xx63/rickyd217/IMG_0181_zps42c4c449.jpg Nice setup. |
|
|
|
CA, USA
|
Posted: 3/3/2014 9:46:39 AM EDT
[Last Edit: SHOCKNM]
[#8]
Xxx
|
|
|
WA, USA
|
Posted: 3/3/2014 11:18:15 AM EDT
[#9]
it looks custom. probably cut a handguard down
|
|
|
|
Posted: 3/3/2014 11:53:48 AM EDT
[#10]
My first actual build from all individual parts.
Sorry for the potato pic. 
PSA AP lower PSA lower parts kit PSA blem upper 8" MAS Defense .330BLK stainless barrel. MAS Defense steel LP gas block and pistol gas tube Spike Pistol tube, T2 buffer and spring. KAK slimline .30 cal flash can timed with a crush washer Midwest Industries 10" Keymod rail I plan on putting a set of rail panels on but they are still in development at MI. Supposed to be available soon. Haven't decided on a set of BUIS' No report on how it shoots as I don't have any ammo.  I did just get setup to start cutting and forming cases and have 200 projectiles. All I need is to find some powder.
|
|
|
|
VA, USA
|
Posted: 3/3/2014 3:51:00 PM EDT
[Last Edit: CtSmshr]
[#11]
Quote HistoryOriginally Posted By Brutus2:
Nice photo Quote HistoryOriginally Posted By Brutus2:
Originally Posted By CtSmshr:
DAPAGE...OWNTIT http://i1285.photobucket.com/albums/a584/GudOlBoy1/PicsArt_1393807603081_zps6bd6640f.jpg Nice photo Thanks man!  Put my AAC brake on yesterday.
|
|
|
MN, USA
|
Posted: 3/3/2014 8:17:59 PM EDT
[#12]
     
|
|
|
|
Posted: 3/3/2014 8:26:21 PM EDT
[#13]
Quote HistoryOriginally Posted By CtSmshr:
Thanks man! Put my AAC brake on yesterday.
http://i1285.photobucket.com/albums/a584/GudOlBoy1/2014-03-03151445_zps7bb4ae5f.jpg http://i1285.photobucket.com/albums/a584/GudOlBoy1/20140301_102403_zpse33e3dad.jpg Quote HistoryOriginally Posted By CtSmshr:
Originally Posted By Brutus2:
Originally Posted By CtSmshr:
DAPAGE...OWNTIT http://i1285.photobucket.com/albums/a584/GudOlBoy1/PicsArt_1393807603081_zps6bd6640f.jpg Nice photo Thanks man! Put my AAC brake on yesterday.
http://i1285.photobucket.com/albums/a584/GudOlBoy1/2014-03-03151445_zps7bb4ae5f.jpg http://i1285.photobucket.com/albums/a584/GudOlBoy1/20140301_102403_zpse33e3dad.jpg Looks good!! 
|
|
|
|
CO, USA
|
Posted: 3/3/2014 8:49:42 PM EDT
[#14]
Sorry for the crappy pic - I was just too excited to get my family up here now that I finally have a rifle, carbine, and pistol!
Thanks to the "Pistol AR" section of ar15.com for getting me hooked on the idea! I just stumbled over here by accident one day and was hooked when I saw the awesome pistols in this thread. More high quality pics to come when I get time. |
|
|
CA, USA
|
Posted: 3/4/2014 2:04:29 AM EDT
[Last Edit: Cali-AR15]
[#15]
My $650 Steel Case Special (that happens to love 5.56 too):  Barrel - Nonameske 5.56/.223 10.5" Carbine Gas 4140 Chromoly Mag Phos (Hammer Forged, but it was hot that day) BCG - Damien Defense 9310 Bolt NiB Full Auto Carrier Lower Receiver - Snipe's Tactical 80% 7170 Gun Show Snipe-onanza Upper Receiver - PSA Blem (required cat-like computer reflexes) LPK - PSA Classic w/ Magpul Trigger Gd, Blackhawk Grip Quad Rail - 10" Shangai Rifleworks, eBay sneaky snipealicious 1am closeout Sights - UTG - Tiananmen Square Collector's edition Buffer Assembly - Phase (insert random number here, except 5) Pistol Buffer Assembly Gun Show "you can have it, just go away" Discount Muzzle Device, Shen-Zen Tactical Angled Foregrip, Sling Attachment, Upper Parts - eBay, everyday, all day, thousands of themmm Magazine, Rail Covers and Ranger Plates - Magpul (from some good gentlemen on the internet, I think it's real?) Buffer Tube Saddle - Command Arms ($18 Gun Show "ok, you can have it, we're tired" charity giveaway) . Nobel Prize winning Bullet Button - starts with e Stenciling - Crayola (Walmart, circa 2001) Performance Review: Makes really loud sound. Hits Chest-sized groups from really far. Head size, with good ammo... but more importantly: chicks dig it. . |
|
|
USA
|
Posted: 3/4/2014 2:19:45 AM EDT
[#16]
i love it ^
|
|
|
TX, USA
|
Posted: 3/4/2014 3:47:53 AM EDT
[Last Edit: Mike_Anthony]
[#17]
Quote HistoryOriginally Posted By Cali-AR15:
My $650 Steel Case Special (that happens to love 5.56 too): http://i57.tinypic.com/24d0l1t.png Barrel - Nonamesky 5.56/.223 10.5" Carbine Gas 4140 Chromoly Mag Phos (Hammer Forged, but it was hot that day) BCG - Damien Defense 9310 Bolt NiB Full Auto Carrier Lower Receiver - Snike's 80% 7170 Gun Show Closing Minute Discount Bonanza Upper Receiver - PSA Blem (required cat-like reflexes) LPK - PSA Classic w/ Magpul Trigger Gd, Blackhawk Grip Quad Rail - 10" Shangai Rifleworks, eBay sneaky snipealicious 1am closeout Sights - UTG - Tiananmen Square Collector's edition Buffer Assembly - Phase (insert random number here, except 5) Pistol Buffer Assembly Gun Show Closing Minute "ok, you can have it, we need to go" Discount Muzzle Device, Angled Foregrip, Sling Attachment, Bullet Button, Upper Parts - eBay, everyday, all day, thousands of themmm Magazine, Rail Covers and Ranger Plates - Magpul (from some good gentlemen on the internet, I think it's real?) Buffer Tube Saddle - Command Arms ($18 Gun Show "ok, you can have it, we're tired" charity giveaway) Stenciling - Crayola (Walmart, circa 2001) Goes bang, really loud. Hits Chest-sized groups from really far. Head size, with good ammo... but more importantly chicks dig it. Awesome build you got there!! I built something similar a while back, but in 7.5" Use it mostly as a truck gun, camping etc...This was the first time I utilized a VooDoo barrel and was blown away (no pun intended) at how accurate they are. 
|
|
|
|
Posted: 3/4/2014 1:24:41 PM EDT
[#18]
Quote HistoryOriginally Posted By Jacobus:
Had to go as Cheap as possible to add another one to my collection... Highly Inspired Travy, Just finished, here's mine <a href="http://s1229.photobucket.com/user/jacobus67gt/media/9687d8dc-860e-48e3-bc36-0a061e6537f0.jpg.html" target="_blank">http://i1229.photobucket.com/albums/ee477/jacobus67gt/9687d8dc-860e-48e3-bc36-0a061e6537f0.jpg</a> <a href="http://s1229.photobucket.com/user/jacobus67gt/media/PhotoFeb1483429PM.jpg.html" target="_blank">http://i1229.photobucket.com/albums/ee477/jacobus67gt/PhotoFeb1483429PM.jpg</a> $40 dollar no name Ebay free float Quad Rail I Cut an Inch of off, Like you said well built and sturdy for 40 bucks. Mas barrel, Mas Flash Can, Mas buffer kit, EP lower, Palmetto blemished upper, Palmetto BCG, Palmetto LPK, Primary Arms Micro Dot, Primary arms light switch, Surefire G3, and Sig Brace. Cheap, Effective, Highly Recommend. Quote HistoryOriginally Posted By Jacobus:
Originally Posted By travy:
Originally Posted By cardnation:
Originally Posted By travy:
https://scontent-a-sea.xx.fbcdn.net/hphotos-prn1/t1/1013236_10202189809980059_416425640_n.jpg Specs on that 'pistol'? 
. Surplus arms forged lower, surplus arms billet upper and 7.5 pistol barrel with kak industries flash can. $40 no name amazon.com free float quad rail that I cut an inch off ( surprisingly well build and sturdy for $40) magpul moe grip, rainier arms BCG, surplus arms pistol buffer tube/ buffer, PSA lower parts kit ,Sig pistol brace and primary arms micro dot. Had to go as Cheap as possible to add another one to my collection... Highly Inspired Travy, Just finished, here's mine <a href="http://s1229.photobucket.com/user/jacobus67gt/media/9687d8dc-860e-48e3-bc36-0a061e6537f0.jpg.html" target="_blank">http://i1229.photobucket.com/albums/ee477/jacobus67gt/9687d8dc-860e-48e3-bc36-0a061e6537f0.jpg</a> <a href="http://s1229.photobucket.com/user/jacobus67gt/media/PhotoFeb1483429PM.jpg.html" target="_blank">http://i1229.photobucket.com/albums/ee477/jacobus67gt/PhotoFeb1483429PM.jpg</a> $40 dollar no name Ebay free float Quad Rail I Cut an Inch of off, Like you said well built and sturdy for 40 bucks. Mas barrel, Mas Flash Can, Mas buffer kit, EP lower, Palmetto blemished upper, Palmetto BCG, Palmetto LPK, Primary Arms Micro Dot, Primary arms light switch, Surefire G3, and Sig Brace. Cheap, Effective, Highly Recommend. That paint is sick. Please link to details of making that happen. |
|
|
|
|
Posted: 3/4/2014 7:50:19 PM EDT
[Last Edit: fatkid35]
[#19]
Quote HistoryOriginally Posted By Cali-AR15:
Performance Review: Makes really loud sound. Hits Chest-sized groups from really far. Head size, with good ammo... but more importantly: chicks dig it. she's got a nice bumper. nice stick btw. |
|
|
|
CO, USA
|
Posted: 3/4/2014 11:28:57 PM EDT
[#20]
Quote HistoryOriginally Posted By Cali-AR15:
My $650 Steel Case Special (that happens to love 5.56 too): http://i57.tinypic.com/24d0l1t.png Barrel - Nonameske 5.56/.223 10.5" Carbine Gas 4140 Chromoly Mag Phos (Hammer Forged, but it was hot that day) BCG - Damien Defense 9310 Bolt NiB Full Auto Carrier Lower Receiver - Snipe's Tactical 80% 7170 Gun Show Snipe-onanza Upper Receiver - PSA Blem (required cat-like computer reflexes) LPK - PSA Classic w/ Magpul Trigger Gd, Blackhawk Grip Quad Rail - 10" Shangai Rifleworks, eBay sneaky snipealicious 1am closeout Sights - UTG - Tiananmen Square Collector's edition Buffer Assembly - Phase (insert random number here, except 5) Pistol Buffer Assembly Gun Show "you can have it, just go away" Discount Muzzle Device, Shen-Zen Tactical Angled Foregrip, Sling Attachment, Upper Parts - eBay, everyday, all day, thousands of themmm Magazine, Rail Covers and Ranger Plates - Magpul (from some good gentlemen on the internet, I think it's real?) Buffer Tube Saddle - Command Arms ($18 Gun Show "ok, you can have it, we're tired" charity giveaway) . Nobel Prize winning Bullet Button - starts with e Stenciling - Crayola (Walmart, circa 2001) Performance Review: Makes really loud sound. Hits Chest-sized groups from really far. Head size, with good ammo... but more importantly: chicks dig it. . Awesome! Where did you find a deal on the DD BCG? |
|
|
PA, USA
|
Posted: 3/4/2014 11:36:14 PM EDT
[#21]
Quote HistoryOriginally Posted By Mike_Anthony:
Awesome build you got there!! I built something similar a while back, but in 7.5" Use it mostly as a truck gun, camping etc...This was the first time I utilized a VooDoo barrel and was blown away (no pun intended) at how accurate they are. http://i62.tinypic.com/dnelo0.jpg Quote HistoryOriginally Posted By Mike_Anthony:
Originally Posted By Cali-AR15:
My $650 Steel Case Special (that happens to love 5.56 too): http://i57.tinypic.com/24d0l1t.png Barrel - Nonamesky 5.56/.223 10.5" Carbine Gas 4140 Chromoly Mag Phos (Hammer Forged, but it was hot that day) BCG - Damien Defense 9310 Bolt NiB Full Auto Carrier Lower Receiver - Snike's 80% 7170 Gun Show Closing Minute Discount Bonanza Upper Receiver - PSA Blem (required cat-like reflexes) LPK - PSA Classic w/ Magpul Trigger Gd, Blackhawk Grip Quad Rail - 10" Shangai Rifleworks, eBay sneaky snipealicious 1am closeout Sights - UTG - Tiananmen Square Collector's edition Buffer Assembly - Phase (insert random number here, except 5) Pistol Buffer Assembly Gun Show Closing Minute "ok, you can have it, we need to go" Discount Muzzle Device, Angled Foregrip, Sling Attachment, Bullet Button, Upper Parts - eBay, everyday, all day, thousands of themmm Magazine, Rail Covers and Ranger Plates - Magpul (from some good gentlemen on the internet, I think it's real?) Buffer Tube Saddle - Command Arms ($18 Gun Show "ok, you can have it, we're tired" charity giveaway) Stenciling - Crayola (Walmart, circa 2001) Goes bang, really loud. Hits Chest-sized groups from really far. Head size, with good ammo... but more importantly chicks dig it. Awesome build you got there!! I built something similar a while back, but in 7.5" Use it mostly as a truck gun, camping etc...This was the first time I utilized a VooDoo barrel and was blown away (no pun intended) at how accurate they are. http://i62.tinypic.com/dnelo0.jpg I was thinking of purchasing a voodoo barrel for my first build, glad to hear you're happy with yours, might influence me even more to pull the trigger |
|
|
TX, USA
|
Posted: 3/5/2014 11:51:26 PM EDT
[#23]
Quote HistoryOriginally Posted By emb876:
I was thinking of purchasing a voodoo barrel for my first build, glad to hear you're happy with yours, might influence me even more to pull the trigger Quote HistoryOriginally Posted By emb876:
Originally Posted By Mike_Anthony:
Awesome build you got there!! I built something similar a while back, but in 7.5" Use it mostly as a truck gun, camping etc...This was the first time I utilized a VooDoo barrel and was blown away (no pun intended) at how accurate they are. http://i62.tinypic.com/dnelo0.jpg I was thinking of purchasing a voodoo barrel for my first build, glad to hear you're happy with yours, might influence me even more to pull the trigger You won't regret using a VooDoo barrel, the quality is superb. I've built pistol uppers in varying lengths over the years, using barrels from just about every vendor, but I have to say these VooDoo barrels really stand out in performance, fit, finish etc.. |
|
|
TX, USA
|
Posted: 3/5/2014 11:55:08 PM EDT
[#24]
Quote HistoryOriginally Posted By Ray_G:
Been inactive for awhile...appears my post count from back in the day may be gone. Oh well. My recent spring build: <a href="http://s570.photobucket.com/user/ray_gerber/media/Wpns%20Pics/10_5%20Pistol/105LMT_ST_ARpistol_zpsd6975b3e.jpg.html" target="_blank">http://i570.photobucket.com/albums/ss141/ray_gerber/Wpns%20Pics/10_5%20Pistol/105LMT_ST_ARpistol_zpsd6975b3e.jpg</a> Next to her older sister <a href="http://s570.photobucket.com/user/ray_gerber/media/Wpns%20Pics/10_5%20Pistol/16amp105_2_zps3ee1db30.jpg.html" target="_blank">http://i570.photobucket.com/albums/ss141/ray_gerber/Wpns%20Pics/10_5%20Pistol/16amp105_2_zps3ee1db30.jpg</a> Build was a conglomeration: ST lower RRA LPK (added in JP springs to the single stage trigger) BCM grip KAK super sig pistol tube kit SB15 LMT 10.5 upper KAC rail RRA fixed rear sight KAK flash can EOTech 512 Inforce WML Magpul AFG, sling We'll see how she shoots this weekend r- Ray I'm really digging that one, what is the total weight? Actually, both of those are nice! |
|
|
NM, USA
|
Posted: 3/6/2014 12:19:54 AM EDT
[#25]
how do i attach my picture
|
|
|
|
Posted: 3/6/2014 1:02:47 AM EDT
[#26]
Quote HistoryOriginally Posted By Carkus:
how do i attach my picture grab the url of the image (right click on the image) then select the "image" button on the bottom in the Post Reply window (looks like two mountains and a sun) paste url bingo |
|
|
|
TX, USA
|
Posted: 3/6/2014 1:28:22 AM EDT
[#27]
Quote HistoryOriginally Posted By Carkus:
how do i attach my picture Click on this link, and it will walk you through the process as well as allow you to test it out: http://www.ar15.com/forums/t_1_168/638569_Picture_posting_tutorial_and_PICTURE_test_thread.html |
|
|
|
Posted: 3/6/2014 1:41:59 AM EDT
[#28]
Quote HistoryOriginally Posted By YukonBoy03:
grab the url of the image (right click on the image) then select the "image" button on the bottom in the Post Reply window (looks like two mountains and a sun) paste url bingo Quote HistoryOriginally Posted By YukonBoy03:
Originally Posted By Carkus:
how do i attach my picture grab the url of the image (right click on the image) then select the "image" button on the bottom in the Post Reply window (looks like two mountains and a sun) paste url bingo You forgot that he's got to upload it somewhere like Photobucket or Facebook first. |
|
|
|
VA, USA
|
Posted: 3/6/2014 6:34:20 AM EDT
[#29]
Quote HistoryOriginally Posted By Mike_Anthony:
I'm really digging that one, what is the total weight? Actually, both of those are nice! That's a good question on the weight; my initial impression is 'not light' but that's my own doing! She weighs about as much as the rifle beside her and/or my normal M4's from work but that's to be expected given the drop in KAC rail, EOTech, full size rear sight, etc. The H&K magazine certainly isn't lithe either. Next time I may do a lighterweight build...perhaps in ~7.5" and/or 300 BLK. r- Ray |
|
|
MN, USA
|
Posted: 3/6/2014 2:29:47 PM EDT
[Last Edit: pool_shark]
[#30]
7.5" 7.62x39
|
|
|
VA, USA
|
Posted: 3/6/2014 5:30:39 PM EDT
[#31]
|
|
|
|
Posted: 3/6/2014 7:17:50 PM EDT
[#32]
Quote HistoryOriginally Posted By Cali-AR15:
My $650 Steel Case Special (that happens to love 5.56 too): http://i57.tinypic.com/24d0l1t.png Barrel - Nonameske 5.56/.223 10.5" Carbine Gas 4140 Chromoly Mag Phos (Hammer Forged, but it was hot that day) BCG - Damien Defense 9310 Bolt NiB Full Auto Carrier Lower Receiver - Snipe's Tactical 80% 7170 Gun Show Snipe-onanza Upper Receiver - PSA Blem (required cat-like computer reflexes) LPK - PSA Classic w/ Magpul Trigger Gd, Blackhawk Grip Quad Rail - 10" Shangai Rifleworks, eBay sneaky snipealicious 1am closeout Sights - UTG - Tiananmen Square Collector's edition Buffer Assembly - Phase (insert random number here, except 5) Pistol Buffer Assembly Gun Show "you can have it, just go away" Discount Muzzle Device, Shen-Zen Tactical Angled Foregrip, Sling Attachment, Upper Parts - eBay, everyday, all day, thousands of themmm Magazine, Rail Covers and Ranger Plates - Magpul (from some good gentlemen on the internet, I think it's real?) Buffer Tube Saddle - Command Arms ($18 Gun Show "ok, you can have it, we're tired" charity giveaway) . Nobel Prize winning Bullet Button - starts with e Stenciling - Crayola (Walmart, circa 2001) Performance Review: Makes really loud sound. Hits Chest-sized groups from really far. Head size, with good ammo... but more importantly: chicks dig it. . I am confused, Does the CAA saddle fit a pistol buffer tube? |
|
|
|
TX, USA
|
Posted: 3/6/2014 11:49:13 PM EDT
[#33]
Quote HistoryOriginally Posted By SilverBearX:
I am confused, Does the CAA saddle fit a pistol buffer tube? It will fit a pistol tube, but not effectively. Most people use pieces of inner-tube, foam, glue, and just about anything else to hold it in place. The Thordsen cover fixes that problem though since it was made for the CAA ST1 saddle as well as the CAA cheek riser. I tried the sb15, but didn't like it. The Thordsen/CAA combo on the other hand......perfect. |
|
|
FL, USA
|
Posted: 3/7/2014 1:04:46 AM EDT
[Last Edit: Rick_A]
[#34]
I had PDWish pistol envy. Fixed.
This is: JSE Surplus 7" 5.56mm 1/9 chrome lined barrel upper with fixed FSB (shaved) Spike's Tactical Honey Badger lower Troy 7.2" Alpha Rail on Colt barrel nut Troy QD end plate PWS CQB comp C-More Railway sight Magpul BUS Magpul AFG1 Magpul K grip Palmetto State Armory pistol LPK Generic rubber handlebar cover Wolff extra powered buffer spring Wolff reduced power trigger spring Extractor O-ring upgrade Lightened hammer with clipped spring KNS pins CMMG 22lr conversion Most of the pics aren't too great as they were taken on an overcast day. 
20140303_100646 by Slick_Rick77, on Flickr 
20140303_100716 by Slick_Rick77, on Flickr 
20140306_111747 by Slick_Rick77, on Flickr 
20140306_111715 by Slick_Rick77, on Flickr 
20140306_111829 by Slick_Rick77, on Flickr 
20140306_111807 by Slick_Rick77, on Flickr 
20140306_111933 by Slick_Rick77, on Flickr 
20140306_121007 by Slick_Rick77, on Flickr Edited to fix links/pics: 
20140306_112103 by Slick_Rick77, on Flickr 
20140306_120912 by Slick_Rick77, on Flickr |
|
|
TX, USA
|
Posted: 3/7/2014 1:17:09 AM EDT
[#35]
Quote HistoryOriginally Posted By Rick_A:
I had PDWish pistol envy. Fixed. This is: JSE Surplus 7" 5.56mm 1/9 chrome lined barrel upper with fixed FSB (shaved) Spike's Tactical Honey Badger lower Troy 7.2" Alpha Rail on Colt barrel nut Troy QD end plate PWS CQB comp C-More Railway sight Magpul BUS Magpul AFG1 Magpul K grip Palmetto State Armory pistol LPK Generic rubber handlebar cover Wolff extra powered buffer spring Wolff reduced power trigger spring Extractor O-ring upgrade Lightened hammer with clipped spring KNS pins CMMG 22lr conversion Most of the pics aren't too great as they were taken on an overcast day. [email=http://www.flickr.com/photos/38468288@N03/12920445725/]https://farm8.staticflickr.com/7314/12920445725_51bafb8fdb_o.jpg[/email] 20140303_100646 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12920855054/]https://farm8.staticflickr.com/7317/12920855054_3bae20ee7d_o.jpg[/email] 20140303_100716 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983465804/]https://farm4.staticflickr.com/3190/12983465804_073a725577_o.jpg[/email] 20140306_111747 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983048155/]https://farm8.staticflickr.com/7430/12983048155_832464e4c1_o.jpg[/email] 20140306_111715 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983047915/]https://farm4.staticflickr.com/3534/12983047915_b850881ff4_o.jpg[/email] 20140306_111829 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983466214/]https://farm4.staticflickr.com/3417/12983466214_b13d410022_o.jpg[/email] 20140306_111807 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983186683/]https://farm4.staticflickr.com/3650/12983186683_049e0bf88b_o.jpg[/email] 20140306_111933 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983465594/]https://farm3.staticflickr.com/2584/12983465594_c386368eb3_o.jpg[/email] 20140306_121007 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983048305/]https://farm8.staticflickr.com/7298/12983048305_d96a9801a1_o.jpg[/email] 20140306_112103 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983048215/]https://farm4.staticflickr.com/3798/12983048215_9b6ed58fc7_o.jpg[/email] 20140306_120912 by Slick_Rick77, on Flickr That's sick.....Rick. But I mean that in a good way. Very nice!! How do you like the C More? |
|
|
FL, USA
|
Posted: 3/7/2014 1:59:19 AM EDT
[#36]
Quote HistoryOriginally Posted By Mike_Anthony:
That's sick.....Rick. But I mean that in a good way. Very nice!! How do you like the C More? Quote HistoryOriginally Posted By Mike_Anthony:
Originally Posted By Rick_A:
I had PDWish pistol envy. Fixed. This is: JSE Surplus 7" 5.56mm 1/9 chrome lined barrel upper with fixed FSB (shaved) Spike's Tactical Honey Badger lower Troy 7.2" Alpha Rail on Colt barrel nut Troy QD end plate PWS CQB comp C-More Railway sight Magpul BUS Magpul AFG1 Magpul K grip Palmetto State Armory pistol LPK Generic rubber handlebar cover Wolff extra powered buffer spring Wolff reduced power trigger spring Extractor O-ring upgrade Lightened hammer with clipped spring KNS pins CMMG 22lr conversion Most of the pics aren't too great as they were taken on an overcast day. [email=http://www.flickr.com/photos/38468288@N03/12920445725/]https://farm8.staticflickr.com/7314/12920445725_51bafb8fdb_o.jpg[/email] 20140303_100646 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12920855054/]https://farm8.staticflickr.com/7317/12920855054_3bae20ee7d_o.jpg[/email] 20140303_100716 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983465804/]https://farm4.staticflickr.com/3190/12983465804_073a725577_o.jpg[/email] 20140306_111747 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983048155/]https://farm8.staticflickr.com/7430/12983048155_832464e4c1_o.jpg[/email] 20140306_111715 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983047915/]https://farm4.staticflickr.com/3534/12983047915_b850881ff4_o.jpg[/email] 20140306_111829 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983466214/]https://farm4.staticflickr.com/3417/12983466214_b13d410022_o.jpg[/email] 20140306_111807 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983186683/]https://farm4.staticflickr.com/3650/12983186683_049e0bf88b_o.jpg[/email] 20140306_111933 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983465594/]https://farm3.staticflickr.com/2584/12983465594_c386368eb3_o.jpg[/email] 20140306_121007 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983048305/]https://farm8.staticflickr.com/7298/12983048305_d96a9801a1_o.jpg[/email] 20140306_112103 by Slick_Rick77, on Flickr [email=http://www.flickr.com/photos/38468288@N03/12983048215/]https://farm4.staticflickr.com/3798/12983048215_9b6ed58fc7_o.jpg[/email] 20140306_120912 by Slick_Rick77, on Flickr That's sick.....Rick. But I mean that in a good way. Very nice!! How do you like the C More? Thanks. It's good. It's expensive for what it is, but it fits the build. The dot is pretty well defined compared to the budget red dots. It's lost cred as a tactical sight though it still has a strong following in competition circles so it can't be all bad. I recently checked one out on an old-school A1 style AR with a goose neck mount and was impressed with it. I originally wanted to use an ACOG mini, but it'd be about the same price as the gun itself. Could not justify that on a fun gun. |
|
|
FL, USA
|
Posted: 3/7/2014 3:48:06 AM EDT
[#37]
My First Pistol build
UCWRG lower and BCG Red X 7.5 upper RRA LPK Noveske KX3 Phase 5 buffer and Bolt Release POF drop in trigger http://www.flickr.com/photos/23393364@N07/12985284595/ |
|
|
|
Posted: 3/7/2014 7:53:21 AM EDT
[#38]
My first pistol build - 7.62x39 goodness!
|
|
|
|
|
Posted: 3/7/2014 8:42:45 AM EDT
[Last Edit: SilverBearX]
[#39]
Quote HistoryOriginally Posted By Mike_Anthony:
It will fit a pistol tube, but not effectively. Most people use pieces of inner-tube, foam, glue, and just about anything else to hold it in place. The Thordsen cover fixes that problem though since it was made for the CAA ST1 saddle as well as the CAA cheek riser. I tried the sb15, but didn't like it. The Thordsen/CAA combo on the other hand......perfect. Quote HistoryOriginally Posted By Mike_Anthony:
Originally Posted By SilverBearX:
I am confused, Does the CAA saddle fit a pistol buffer tube? It will fit a pistol tube, but not effectively. Most people use pieces of inner-tube, foam, glue, and just about anything else to hold it in place. The Thordsen cover fixes that problem though since it was made for the CAA ST1 saddle as well as the CAA cheek riser. I tried the sb15, but didn't like it. The Thordsen/CAA combo on the other hand......perfect. But the Thordsen cover kit comes with a carbine shaped tube. I am just trying to decide between the SB15 and the CAA ST1. I guess I need to read up a little more on it. Most of the saddles I have seen are on carbine tubes. So the Thordsen cover will go over a pistol tube. Edit - So it appears that the Thordsen cover does not go on a pistol buffer tube - from their site "PLEASE NOTE: THIS PRODUCT IS COMPATIBLE WITH MIL-SPEC AND COMMERCIAL CARBINE BUFFER TUBES ONLY. CLICK HERE TO GO TO OUR BUFFER TUBE PARTS PAGE" |
|
|
|
TX, USA
|
Posted: 3/7/2014 4:24:45 PM EDT
[#40]
Quote HistoryOriginally Posted By SilverBearX:
But the Thordsen cover kit comes with a carbine shaped tube. I am just trying to decide between the SB15 and the CAA ST1. I guess I need to read up a little more on it. Most of the saddles I have seen are on carbine tubes. So the Thordsen cover will go over a pistol tube. Edit - So it appears that the Thordsen cover does not go on a pistol buffer tube - from their site "PLEASE NOTE: THIS PRODUCT IS COMPATIBLE WITH MIL-SPEC AND COMMERCIAL CARBINE BUFFER TUBES ONLY. CLICK HERE TO GO TO OUR BUFFER TUBE PARTS PAGE" Quote HistoryOriginally Posted By SilverBearX:
Originally Posted By Mike_Anthony:
Originally Posted By SilverBearX:
I am confused, Does the CAA saddle fit a pistol buffer tube? It will fit a pistol tube, but not effectively. Most people use pieces of inner-tube, foam, glue, and just about anything else to hold it in place. The Thordsen cover fixes that problem though since it was made for the CAA ST1 saddle as well as the CAA cheek riser. I tried the sb15, but didn't like it. The Thordsen/CAA combo on the other hand......perfect. But the Thordsen cover kit comes with a carbine shaped tube. I am just trying to decide between the SB15 and the CAA ST1. I guess I need to read up a little more on it. Most of the saddles I have seen are on carbine tubes. So the Thordsen cover will go over a pistol tube. Edit - So it appears that the Thordsen cover does not go on a pistol buffer tube - from their site "PLEASE NOTE: THIS PRODUCT IS COMPATIBLE WITH MIL-SPEC AND COMMERCIAL CARBINE BUFFER TUBES ONLY. CLICK HERE TO GO TO OUR BUFFER TUBE PARTS PAGE" That is correct. The Thordsen cover must be placed over a carbine buffer tube. This is to provide a secure fit and allow the CAA ST1 to fit like a glove. If you get one, it's worth the few extra bucks to upgrade to the QD version. |
|
|
TX, USA
|
Posted: 3/7/2014 4:26:22 PM EDT
[#41]
Quote HistoryOriginally Posted By kmregan45:
My first pistol build - 7.62x39 goodness! http://i1197.photobucket.com/albums/aa422/kmregan45/SAM_0055-2.jpg Very nice!! |
|
|
|
Posted: 3/7/2014 9:38:50 PM EDT
[#42]
Quote HistoryOriginally Posted By Mike_Anthony:
Very nice!! Quote HistoryOriginally Posted By Mike_Anthony:
Originally Posted By kmregan45:
My first pistol build - 7.62x39 goodness! http://i1197.photobucket.com/albums/aa422/kmregan45/SAM_0055-2.jpg Very nice!! Thanks! It shoots great! |
|
|
|
NE, USA
|
Posted: 3/8/2014 12:00:04 PM EDT
[#43]
my entry into pistol builds.
http://i35.photobucket.com/albums/d183/clinton38/pistolar_zpsbe8325a0.jpg |
|
|
VA, USA
|
Posted: 3/9/2014 10:30:32 PM EDT
[#44]
Learned something today... AR pistol + AAC brake + shooting too close to a barrier = arm hair removal
|
|
|
CA, USA
|
Posted: 3/11/2014 9:15:44 PM EDT
[#45]
Quote HistoryOriginally Posted By Mike_Anthony: Awesome build you got there!! I built something similar a while back, but in 7.5" Use it mostly as a truck gun, camping etc...This was the first time I utilized a VooDoo barrel and was blown away (no pun intended) at how accurate they are. http://i62.tinypic.com/dnelo0.jpg Likewise to you Mike, nice pistol - I've been thinking about completing the Command Arms set up at the buffer tube, as their cover extends things out a bit and makes the pistol a bit more comfortable to shoot, but I ran out of budget. It's definitely something I have in mind for the future though. What optic do you have mounted? |
|
|
VA, USA
|
Posted: 3/12/2014 4:57:33 PM EDT
[#46]
|
|
|
VA, USA
|
Posted: 3/13/2014 8:39:42 PM EDT
[Last Edit: Soopreme]
[#47]
Sweet builds in here! Couple builds I've done in the past.
Noveske Gen 1 Lower (chainsaw) + VLTOR CASV-M + 7.5" Rainier Arms barrel (notice no BUIS. Sold it before I could even buy the BUIS for this thing) 
Phase 5 Tactical Lower, Upper, Spikes tactical 9" rail, KX3, Phase 5 7.5" barrel with PIGTAIL Gas tube, ARMS 40L BUIS and KNS 
- Phase 5 Tactical pistol marked lower rec, lower parts, upper rec, pistol tube, bolt catch lever, winter guard, bcg and ch - Noveske 10.5" CQB barrel with gas block and tube - Noveske KX3 - Daniel Defense Modular Rail 12.0 - no buis for this one either. Sold. 
|
|
|
|
Posted: 3/14/2014 12:30:53 PM EDT
[#48]
Quote HistoryOriginally Posted By WheelchairMitch: Quentin Defense Forged Lower LPK from Omega Rainier Arms Forged Upper w/o Forward Assist Rainier Arms BCG FN 10.5 Moly Chrome Barrel 1:7 BCM Gunfighter CH Mod 4 Troy Alpha Rail 11 inch Troy Claymore Brake DSC Pistol Buffer Tube w/ EM rubber Low profile gas block Custom Dust Cover Vortex Strikefire Red/Green Dot Magpul MBUS gen 2 Magpul BAD Lever Magpul MOE K2 Seekins Trigger Guard Seekins Mag Release I love the blue parts and engraving. Very unique.
|
|
|
|
USA
|
Posted: 3/15/2014 8:17:23 PM EDT
[#49]
1st AR Pistol Build. 300 Blackout.
|
|
|
|
Posted: 3/15/2014 8:40:28 PM EDT
[#50]
Quote HistoryOriginally Posted By sigrug17:
1st AR Pistol Build. 300 Blackout. http://i898.photobucket.com/albums/ac190/sigrug17/pistol%20v1/pistol1complete003.jpg http://i898.photobucket.com/albums/ac190/sigrug17/pistol%20v1/pistol1complete006.jpg Talk to me about the extension between the back of the receiver and the Thordsen tube cover...is that a folding hinge, or an extension of some sort? |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
