User Panel
User Panel
User Panel
IA, USA
|
Posted: 10/28/2012 8:58:59 PM EDT
[#1]
Thanks. I'll post pics in a little while. It was pretty easy though. Basically I had the back ring of the flash hider turned down so it would pass through the HG cap. So the second ring holds the cap to the HG. I think I still need to add a lock-washer behind that.
|
|
|
ME, USA
|
Posted: 10/28/2012 10:24:07 PM EDT
[Last Edit: pauljr1283]
[#2]
http://i1083.photobucket.com/albums/j387/pauljr1283/2012-10-16144233.jpg
My new toy  still waiting on the gas tube and BCG (stole the BCG out of my carbine for the pic)
-Delaware Machinery Stripped Lower -Rock River Arms buffer tube assembly -DPMS LPK dust cover forward assist - TAPCO Receiver End Plate Sling Mount Adapter -AR Stoner 7.5" barrel -Model 1 carbine length free float handguard -Noveske gas tube -Yankee Hill Machine: Gas Block Low Profile Set Screw Flash Hider Phantom 5C2 Aggressive -DSArms: Upper Receiver Charging Handle Bolt Carrier Group -Magpul Polymer Trigger Guard |
|
|
IA, USA
|
Posted: 10/28/2012 10:53:35 PM EDT
[Last Edit: MadKaw69]
[#3]
Here is how I made the Magpul HGs work on a 7.5" barrel.
http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/1.jpg Magpul HG http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/2.jpg HG cap. Found out it came out flush with end of barrel. http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/3.jpg Had the last ring of the FH turned down to fit thru the HG cap. http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/4.jpg Slid right in. http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/5.jpg Tightened it down so the second ring of the FH holds the cap and HG together. http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/6.jpg A little dremel and file work to the HG and fit right over the front sight. I plan on putting a rail gas block and front folding site on. I test fired yesterday and noticed the FH had unscrewed itself. I think I need to add a spacer and lockwasher or a couple? Maybe Loctite? Ideas? http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/HoneyBoomBoom1sm1.jpg |
|
|
GA, USA
|
Posted: 10/28/2012 11:16:05 PM EDT
[#4]
Heres my AR pistol ...... I call it the " Militant Midget "
I built the lower from a Palmetto State Armory "Blemished" Lower. PSA pistol Buffer kit and PSA lower parts kit w/ FDE grip and trigger guard. Also installed a Troy Claymore Muzzle Brake so she could spit fire! I need a better front sight and some optics. Nothing crazy as she is really only meant for fun at the range. http://i1223.photobucket.com/albums/dd503/longdread575/Firearm%20Stuff/IMAG0308.jpg |
|
|
AR, USA
|
Posted: 10/28/2012 11:46:08 PM EDT
[#5]
http://sphotos-a.xx.fbcdn.net/hphotos-prn1/69338_10151122755638727_1012460658_n.jpg
New upgrade from my recent post. Added a carbine length free float tube by ati, iron sights which I know the front one is backwards but it looks better and don't snag coming out my Machine Gun length case. I also have a sight-mark holographic red dot on her. I also took off the a2 bird cage flash hider and put on a Nice muzzle break. This thing shoots out fireballs like nobody's business. Its such a joy to shoot. |
|
|
|
Posted: 10/29/2012 12:51:17 AM EDT
[#6]
Originally Posted By Uofaspyder:
Originally Posted By MadKaw69:
http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/HoneyBoomBoom1sm1.jpg My first post and first AR-Pistol. Thanks for all the ideas! Started out as a 7.5" RRA A2 upper. Sun Devil Gun Metal Gray upper. Superior lower. A little figuring out how to make the Magpul HGs work, but I think its gonna work. Interesting you should post pics looking down at the FSP and talk about how you secured the front of the HG. Yes, that is quite interesting. It's like an MOE with FSP cut-out. |
|
|
|
|
Posted: 10/29/2012 4:53:51 PM EDT
[Last Edit: Sixtsix]
[#7]
|
|
|
|
TX, USA
|
Posted: 10/30/2012 10:20:34 AM EDT
[#8]
Spike's Tactical (blemished) Lower RRA 7.5" A3 Upper w/RRA Free Float Quad Rail CMMG 5.56 Lower Parts Kit Phase 5 Tactical Pistol Buffer Tube Magpul XTM Rail Panels - FDE Magpul Polymer Trigger Guard - FDE KNS .250 Push Button Pivot Pin KNS Push Button Rear Take Down Pin Exile Machine 6"L x 1.22"ID FDE Rubber AR-15 Pistol Buffer Tube Cover Laserlyte Carbine Green Laser System - Tan |
|
|
USA
|
Posted: 10/30/2012 12:04:26 PM EDT
[#9]
Originally Posted By MadKaw69:
Here is how I made the Magpul HGs work on a 7.5" barrel. http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/1.jpg Magpul HG http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/2.jpg HG cap. Found out it came out flush with end of barrel. http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/3.jpg Had the last ring of the FH turned down to fit thru the HG cap. http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/4.jpg Slid right in. http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/5.jpg Tightened it down so the second ring of the FH holds the cap and HG together. http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/6.jpg A little dremel and file work to the HG and fit right over the front sight. I plan on putting a rail gas block and front folding site on. I test fired yesterday and noticed the FH had unscrewed itself. I think I need to add a spacer and lockwasher or a couple? Maybe Loctite? Ideas? http://mrsolearysdesign.com/cms/wp-content/uploads/2012/10/HoneyBoomBoom1sm1.jpg Now that is sick! I love it. |
|
|
USA
|
Posted: 11/1/2012 11:15:59 PM EDT
[#10]
Mega upper and lower
DD 11.5" g-profile barrel LaRue 9.0 handguard Phase 5 pistol buffer (Form 1 is pending since May  )
|
|
|
TX, USA
|
Posted: 11/2/2012 1:29:24 PM EDT
[#11]
Here is my first pistol.
PSA Lower PSA Lower Build Kit PSA Hammer Forged 10.5 Upper 
|
|
|
IN, USA
|
Posted: 11/3/2012 3:42:42 PM EDT
[#12]
|
|
|
VA, USA
|
Posted: 11/6/2012 3:20:42 PM EDT
[#13]
My soon to be SBR in 300BLK. |
|
|
NY, USA
|
Posted: 11/7/2012 5:15:21 PM EDT
[#14]
Originally Posted By HKmaster:
Heres my Ar-15 style g36. soon to be SBR with my custom Resident evil Seekins Precision lower. Adams arms low profile gas piston kit installed.
http://imageshack.us/a/img140/4082/bothsidear36.jpg -Resident Evil Umbrella U.B.C.S logo http://imageshack.us/a/img708/6203/logolefto.jpg http://imageshack.us/a/img831/3446/logoright.jpg "update 10-1-12" finally finished the lower with pistol buffer etc. I think that may just be the sexiest beast I have ever effing seen!!!! |
|
|
|
Posted: 11/8/2012 10:20:42 PM EDT
[#15]
my freshly cooked 5.56 pistol:
Adams Arms 7.5" base piston upper PSA NOBAMA lower - ironic, isn't it? :) ACE Pistol buffer kit BCM Mod 3 CH LPK and grip from spare parts bin Eotech 512 will arrive on Monday. Eventually, other tasty bits will be bolted on - plans for KNS pins, ERGO grip or like, replace MBUS with Troy battle sights, etc...   |
|
|
|
WA, USA
|
Posted: 11/9/2012 8:06:03 PM EDT
[#16]
pretty standard, 7.5" upper. Most recent picture i have. The rear sight has been changed since this picture.
http://i45.photobucket.com/albums/f76/87yota/IMAG0456.jpg |
|
|
TX, USA
|
Posted: 11/15/2012 11:17:21 AM EDT
[#17]
My new build "ARP":
http://3.bp.blogspot.com/-J_K84j8LTVg/UKRVeb2xn2I/AAAAAAAABC8/NCZkUzjSO8I/s1600/ARpistol.jpg http://2.bp.blogspot.com/-vfG3iKfa3gg/UKRVfBAXHuI/AAAAAAAABDE/4Bn3EHIMC2U/s1600/ARpistol2.jpg http://1.bp.blogspot.com/-nwqmTvOexhA/UKRVgWGOWBI/AAAAAAAABDU/qNeUFwWbTfM/s1600/ARpistol4.jpg BAD lever and a Strike Ind Cobra AFG will be added soon. DelTon Lower YHM upper build by 'vanderjack' on Gunbroker PSA Pistol LPK Spike's BCG KX3 Piggie Magpull BUIS Burris Fastfire II |
|
|
|
Posted: 11/17/2012 3:23:01 AM EDT
[#18]
My 7.5" pistolas.
|
|
|
|
TX, USA
|
Posted: 11/18/2012 7:37:57 AM EDT
[#19]
Originally Posted By ErikO:
http://farm9.staticflickr.com/8181/7967456318_53e0f19980_z.jpg My WIP mock-up. Short a barrel, BCG and gas line. I'll probably use a different gas block as this one is a used pinned FSB. M&P15 stripped lower A2 upper Magpul MOE carbine length hand guard with AFG Noveske KX3 milspec buffer tube with coated spring and carbine buffer Barrel will probably be 10.5", added a 1.25" cane tip after this pic was taken and will probably put an ACC saddle on the back for a better cheak weld. I keep the ATF Tech letter in the case with it.  Howdy Sir. I sure would like to know where you got that grip. Especially being a 1911 enthusiast. TIA, Ray |
|
|
PA, USA
|
Posted: 11/18/2012 7:32:40 PM EDT
[#20]
Originally Posted By Coupe68:
Here is my first pistol. PSA Lower PSA Lower Build Kit PSA Hammer Forged 10.5 Upper http://i292.photobucket.com/albums/mm39/xp_99ta/DSC_0335.jpg i know it's been 2 weeks... but just in case you didn't realize - the rear mbus is on backwards. |
|
|
|
Posted: 11/18/2012 7:37:35 PM EDT
[#21]
Just waiting on stamps...
|
|
|
|
SC, USA
|
Posted: 11/19/2012 2:32:40 AM EDT
[#22]
Originally Posted By Samal:
my freshly cooked 5.56 pistol: Adams Arms 7.5" base piston upper PSA NOBAMA lower - ironic, isn't it? :) ACE Pistol buffer kit BCM Mod 3 CH LPK and grip from spare parts bin Eotech 512 will arrive on Monday. Eventually, other tasty bits will be bolted on - plans for KNS pins, ERGO grip or like, replace MBUS with Troy battle sights, etc... http://images14.fotki.com/v1628/photos/2/787792/9360390/IMG_25622-vi.jpg http://images60.fotki.com/v661/photos/2/787792/9360390/IMG_25632-vi.jpg Only other Nobo I've seen on this forum! I have one, & so does my buddy. |
|
|
IA, USA
|
Posted: 11/19/2012 2:27:51 PM EDT
[Last Edit: iowarednek]
[#23]
Here's a couple pics of mine that I just got done building last week. Took it to the range the other day and it runs like a champ.
Spikes lower and upper Spikes pistol buffer Kit CMMG lpk YHM Dimond fluted 10.5 barrel ( verry accurate barrel ) Troy TRX 9 forend and claymore muzzle brake Doubble star BCG And charging handle Magpul pistol grip, AFG1, and mag Primary arms micro red dot http://i562.photobucket.com/albums/ss63/BUY_BAFF/015-13.jpg http://i562.photobucket.com/albums/ss63/BUY_BAFF/016-13.jpg http://i562.photobucket.com/albums/ss63/BUY_BAFF/018-8.jpg |
|
|
|
Posted: 11/19/2012 7:58:08 PM EDT
[#24]
My first pistol build. 10.5-inch 300BLK with LaRue alpha rail. Tactical Innovations T15BDX billet lower, Phase 5 buffer tube assembly.
|
|
|
|
MD, USA
|
Posted: 11/20/2012 11:43:55 AM EDT
[#25]
Spikes Upper Receiver
Spikes CJ-15 Jolly Roger Lower Magpul MBUS front and rear Magpul grip Noveske 8.2 inch SS .300 Blackout barrel Spikes 9 inch BAR rail DD lower parts kit Noveske BCG Gunfighter charging handle KX3 Pig Waiting on tax stamp 
 
|
|
|
MI, USA
|
Posted: 11/21/2012 12:58:43 AM EDT
[#26]
|
|
|
|
Posted: 11/21/2012 3:23:03 PM EDT
[Last Edit: ErikO]
[#27]
Originally Posted By ferretray:
Originally Posted By ErikO:
http://farm9.staticflickr.com/8181/7967456318_53e0f19980_z.jpg My WIP mock-up. Short a barrel, BCG and gas line. I'll probably use a different gas block as this one is a used pinned FSB. M&P15 stripped lower A2 upper Magpul MOE carbine length hand guard with AFG Noveske KX3 milspec buffer tube with coated spring and carbine buffer Barrel will probably be 10.5", added a 1.25" cane tip after this pic was taken and will probably put an ACC saddle on the back for a better cheak weld. I keep the ATF Tech letter in the case with it. Howdy Sir. I sure would like to know where you got that grip. Especially being a 1911 enthusiast. TIA, Ray IM sent. The grip is a Pearce Grips 1911 gripframe with their rubber stocks.
More recent picture: 
Update: Got a screaming deal lined up for a DD 10.3" 5.56 barrel and matching bolt carrier group. Should be all wrapped up by January. |
|
|
|
CO, USA
|
Posted: 11/22/2012 2:31:00 AM EDT
[#28]
finally got my parts back from WMD, got it nickle boron coated. heres some pictures enjoy
http://img72.imageshack.us/img72/4092/64026481.jpg http://img850.imageshack.us/img850/7691/13967951.jpg http://img502.imageshack.us/img502/6426/50470078.jpg http://img513.imageshack.us/img513/624/23842215.jpg http://img502.imageshack.us/img502/7782/52583054.jpg |
|
|
|
Posted: 11/24/2012 10:46:05 PM EDT
[Last Edit: 1_Snipes]
[#29]
Factory Spikes 8.1".300blk LW spiral fluted barrel:
|
|
|
|
TX, USA
|
Posted: 11/26/2012 6:43:52 PM EDT
[#30]
|
|
|
|
Posted: 11/27/2012 2:26:01 AM EDT
[#31]
Gee I feel like the ugly girl at the prom...
|
|
|
|
|
Posted: 11/28/2012 4:51:30 PM EDT
[#32]
Haven't decided which way to go with the rail, but here she is so far...
We were hitting 18" steel at 300 yards last week with the 7.5 and open sights. I probably wouldn't have believed it 
|
|
|
|
CO, USA
|
Posted: 11/29/2012 5:20:48 PM EDT
[#33]
Do you need a buffer tube with the Adams Arms piston upper?
(Does the AA-Upper piston device have it's own return spring?) Thx. Capt_C |
|
|
FL, USA
|
Posted: 11/29/2012 10:14:56 PM EDT
[#34]
here's mine as of this afternoon. Still lacking a bcg and sights. those will come with time and maybe St Nick will bring em to me. :)
just put the upper together this afternoon and pinned it for the first time. WOW! I'm stoked to fire it |
|
|
|
Posted: 11/29/2012 10:18:26 PM EDT
[Last Edit: RDTCU]
[#35]
Originally Posted By Capt_C:
Do you need a buffer tube with the Adams Arms piston upper? (Does the AA-Upper piston device have it's own return spring?) Thx. Capt_C The only AR uppers I'm aware of that you DON'T need a functional buffer tube of some type for are the ZM LR300 / Para TTR, Oly OA93, RRA PDS, .22LR ARs and the few random homebuilts floating around. Everything else still has the recoil system in the buffer tube. ETA: Add Faxon Firearms to that list when they go into production... |
|
|
|
CA, USA
|
Posted: 11/30/2012 1:14:06 AM EDT
[#36]
Does the Sig pistol have a buffer tube?
|
|
|
AZ, USA
|
Posted: 11/30/2012 5:35:46 AM EDT
[#37]
Sorry about the quality. My camera is out of town at the moment. So I'm stuck with iPhone5 quality. Parts break down thus far; Lower DDLES Small Frame Glock Lower Receiver, 6065 Billet, Pictogram markings PWS 6065 Pistol Buffer 12 Ounce Heavy Buffer made for 9mm Wolff Extra Power Recoil Spring Magpul MOE K Grip Magpul MS3 QD Sling Battle Arms Development Combat Ambidextrous Safety, Short Throw Geissele Super Dynamic 3 Gun Trigger Colt Small parts Upper VLTOR MUR-1 Upper Receiver Raptor Ambidextrous Charging Handle DDLES Glock Bolt Carrier Troy Industries BUIS, Dioptic Tritium Set Noveske 7" NSR Noveske Rail Covers Mossie Tactical Weapon Light Mount Surefire X300 Ultra Weapon Light BCM Chrome Lined 9mm Barrel Vortex 9mm Flash Suppressor Magpul RSA LaRue Index Clips Magazines 33 Round Glock 9mm Magazines Receiver Markings filled HK style, red and white lacquer 
I chopped the NSR rail so I could seat the X300 Ultra further to the rear to reduce how far the weapon light stuck out. I didn't want the light to stick out past the flash suppressor. The Mossie Tactical rail lowers the weapon light so it doesn't obstruct the sight picture as much. This will help me a great deal since I am adding an Aimpoint T1 with an absolute co-witness in the next few weeks. |
|
|
|
Posted: 11/30/2012 8:07:56 AM EDT
[#38]
Originally Posted By SonOfSolo:
Does the Sig pistol have a buffer tube? No, but it's not based on an AR15. |
|
|
|
IA, USA
|
Posted: 12/2/2012 12:55:36 AM EDT
[Last Edit: MadKaw69]
[#39]
I finally test-fired mine. I think my flash hider is broke? I call her Honey Boom-Boom. :)
http://mrsolearysdesign.com/cms/wp-content/uploads/2012/11/get-attachment.jpeg http://mrsolearysdesign.com/cms/wp-content/uploads/2012/11/get-attachment-3.jpeg Here's the video... http://youtu.be/J8a3KPKwz_0 |
|
|
|
Posted: 12/2/2012 5:56:17 PM EDT
[Last Edit: Morg308]
[#40]
I really dig what you did with that Magpul HG - saw the build earlier in the pic thread. Very cool.
|
|
|
|
KS, USA
|
Posted: 12/2/2012 9:40:56 PM EDT
[#41]
Nothing fancy, just my 10.5" Hog Killers in 5.56 and 300 AAC Blackout.
|
|
|
TX, USA
|
Posted: 12/3/2012 4:56:34 PM EDT
[#42]
Originally Posted By ErikO:
Originally Posted By ferretray:
Originally Posted By ErikO:
http://farm9.staticflickr.com/8181/7967456318_53e0f19980_z.jpg My WIP mock-up. Short a barrel, BCG and gas line. I'll probably use a different gas block as this one is a used pinned FSB. M&P15 stripped lower A2 upper Magpul MOE carbine length hand guard with AFG Noveske KX3 milspec buffer tube with coated spring and carbine buffer Barrel will probably be 10.5", added a 1.25" cane tip after this pic was taken and will probably put an ACC saddle on the back for a better cheak weld. I keep the ATF Tech letter in the case with it. Howdy Sir. I sure would like to know where you got that grip. Especially being a 1911 enthusiast. TIA, Ray IM sent. The grip is a Pearce Grips 1911 gripframe with their rubber stocks.
More recent picture: http://farm9.staticflickr.com/8487/8201421391_ae0a405085.jpg Update: Got a screaming deal lined up for a DD 10.3" 5.56 barrel and matching bolt carrier group. Should be all wrapped up by January. Thanks for the info. on the grip. Nice setup Sir. |
|
|
TX, USA
|
Posted: 12/3/2012 6:31:11 PM EDT
[Last Edit: RacingJake]
[#43]
Here's my 2nd one. Got 200 rounds through it so far and the rest of the ammo should be gone by this weekend
SAA Lower with DPMS guts and JSE 7.5 upper 
My 3rd one will be a 7.62 ! |
|
|
|
Posted: 12/4/2012 8:57:20 AM EDT
[Last Edit: Black-Lions]
[#44]
The idea is to shoot them through the gun not throw them at it !!
|
|
|
|
KS, USA
|
Posted: 12/6/2012 3:24:23 PM EDT
[#45]
Here is how mine currently sits. Mailed my Form 1 on 12/3
|
|
|
|
Posted: 12/6/2012 4:09:21 PM EDT
[Last Edit: Morg308]
[#46]
Sorry I deleted an earlier picture - was really bad. Only have a cell phone. Here's a newer pic. It's no safe queen. It's an ex-LEO 6933 Commando upper, Colt BCG, NDS lower, unsure what the pistol extension is. Tried a SP sling and hatedd it - went to a GP style sling. I tapped the end of the buffer tube and added a cane tip. I will likely pull the CAA saddle even though I like how it feels - it slides forward. I may get a longer bolt and nut and try and get it tighter, but we'll see. The GP sling works really well to tighten up the sight picture - hasty sling style. Tehnically of course, with the VFG it's not a pistol, it's a 'firearm' but I may pull that - just use it as a handstop anyway. Might add a HS later. Anyway, sorry for the again, crappy pic, and it certainly is no beauty, but will be going with me in a pack in the backcountry and I don't have to worry about scratching it. Hell, I might even paint it!
|
|
|
|
AZ, USA
|
Posted: 12/8/2012 10:19:08 PM EDT
[#47]
BCM Chrome Lined 9mm barrel chopped by ADCO to 7.75" and contoured to .625". The front sight post shelf was removed. A stepped contour was added to the area around the chamber for weight reduction. The only thing I'm waiting on now is my bolt carrier from DDLES. 
|
|
|
NE, USA
|
Posted: 12/9/2012 10:27:07 PM EDT
[#48]
wha did you use paint the lettering?
|
|
|
AZ, USA
|
Posted: 12/10/2012 3:19:04 AM EDT
[#49]
Originally Posted By Riceloader12:
wha did you use paint the lettering? http://classic.brownells.com/.aspx/pid=7778/sku=517-100-001/Product/Red-Lacquer-Stik- I used these lacquer sticks. I cleaned up the area with acetone, then heated the work surface with a heat gun. I heated the paint stick to the point that it was melting and rubbed it over the work area. I continued to heat the area until the paint liquified and settled into the engravings. I let it cool and dry some before wiping the excess away with a rag and some acetone. I wish the red was a little darker. |
|
|
NE, USA
|
Posted: 12/10/2012 9:24:50 AM EDT
[#50]
Originally Posted By StrangerDanger:
Originally Posted By Riceloader12:
wha did you use paint the lettering? http://classic.brownells.com/.aspx/pid=7778/sku=517-100-001/Product/Red-Lacquer-Stik- I used these lacquer sticks. I cleaned up the area with acetone, then heated the work surface with a heat gun. I heated the paint stick to the point that it was melting and rubbed it over the work area. I continued to heat the area until the paint liquified and settled into the engravings. I let it cool and dry some before wiping the excess away with a rag and some acetone. I wish the red was a little darker. awesome thank you! |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
