User Panel
User Panel
User Panel
|
Posted: 8/16/2017 6:37:36 PM EDT
[#1]
For anyone interested, we've added an official AR15.COM Instagram thread. If you guys post your images there and we use them, you can earn a new IG icon.
Link |
|
|
|
TN, USA
|
Posted: 8/16/2017 9:44:32 PM EDT
[#2]
11.5 BCM with a noveske lower
|
|
|
|
Posted: 8/16/2017 9:50:21 PM EDT
[#3]
|
|
|
|
AZ, USA
|
Posted: 8/19/2017 11:41:42 PM EDT
[#4]
Just finished this 9mm build.
|
|
|
|
Posted: 8/21/2017 9:18:32 PM EDT
[#5]
Quote HistoryOriginally Posted By Guntoter:
https://c1.staticflickr.com/5/4311/36067741942_df9087214c_b.jpg Built this to somewhat resemble a Commando style M16. Has a complete PSA upper with FN CHF chrome lined barrel, 5.56 and 1x7 with regular phosphate and chrome lined bolt carrier group. Loaner carry handle till PSA gets theirs available again. Lower is a machined out 80% that was already anodized, so running clean and un-numbered. Standard LPK and A2 grip with Shockwave and an H2 buffer. Plan to keep it just as is. Shoots great also. Will have maybe about $600 in it total. Its the second pistol I built for myself. Its in the mail, and the lower is all assembled. Soon, very soon |
|
|
|
|
Posted: 8/21/2017 11:33:49 PM EDT
[#6]
|
|
|
|
USA
|
Posted: 8/22/2017 12:26:11 AM EDT
[#7]
I like your ideas and I wish to subscribe to your newsletter.
Couldn't pass up the deal on Colt 11.5" barrels on GunBroker right now, and I had a spare C7 upper and a pistol grip lying around, so I ended up buying a complete lower to go with it. #FirstWorldProblems |
|
|
FL, USA
|
Posted: 8/22/2017 11:27:28 AM EDT
[#8]
Quote HistoryOriginally Posted By phatmax:
PSA Upper 7" Anderson lower https://www.AR15.Com/media/mediaFiles/38726/20170816_202543-282283.JPG |
|
|
|
Posted: 8/22/2017 7:21:41 PM EDT
[#9]
Quote HistoryOriginally Posted By ThatGuy01:
I like your ideas and I wish to subscribe to your newsletter. https://scontent-sea1-1.xx.fbcdn.net/v/t31.0-8/20988154_10104491432580156_7785010444487962194_o.jpg?oh=2dd2e71d3a3c0013d82f0a468f011853&oe=5A1C4D02 Couldn't pass up the deal on Colt 11.5" barrels on GunBroker right now, and I had a spare C7 upper and a pistol grip lying around, so I ended up buying a complete lower to go with it. #FirstWorldProblems 
|
|
|
|
|
Posted: 8/22/2017 8:37:34 PM EDT
[#10]
Quote HistoryOriginally Posted By manji:
Nice! Quote HistoryOriginally Posted By manji:
Originally Posted By ThatGuy01:
I like your ideas and I wish to subscribe to your newsletter. https://scontent-sea1-1.xx.fbcdn.net/v/t31.0-8/20988154_10104491432580156_7785010444487962194_o.jpg?oh=2dd2e71d3a3c0013d82f0a468f011853&oe=5A1C4D02 Couldn't pass up the deal on Colt 11.5" barrels on GunBroker right now, and I had a spare C7 upper and a pistol grip lying around, so I ended up buying a complete lower to go with it. #FirstWorldProblems |
|
|
|
|
Posted: 8/24/2017 11:01:31 PM EDT
[#11]
|
|
|
|
OK, USA
|
Posted: 8/28/2017 7:47:19 AM EDT
[Last Edit: jhendri223]
[#12]
Finished my pistol build. Should have the optic in the next week or so. Parts list:
Upper: Barrel - Noveske 10.5" Stainless (Included pinned gas block and tube) MD - Noveske KX-3 Bolt - Noveske Charging Handle - Geissele Bad Ass BUIS - Magpul Rail - 12" Juggernaut Tactical Cerakoted Sniper Grey Stripped Upper: EDC Tactical (Cerro Forge) Cerakoted Sniper Grey Lower: Trigger: LaRue MBT with KNS Pins Grip: B5 Stock/Buffer Tube: KAK Blade Buffer: Spike's ST-T2 Buffer Spring: Tubbs Flat Wire Safety: Seekins Precision Ambi Mag Release: Odin Gunworks Enxtended Pins: Battle Arms Development EPS Pins End Plate: Noveske QD Bolt Catch: POF Enhanced Stripped Lower: EDC Tactical Billet Texas Edition Cerakoted Sniper Grey 
|
|
|
TN, USA
|
Posted: 8/28/2017 7:59:48 AM EDT
[Last Edit: NZen]
[#13]
My preferred AR pistol is a 9" Windham in .300 Blackout with a Shockwave Blade, Tactical Link sling and Aimpoint red dot sight. I'm happy.
Cheers!
|
|
|
|
Posted: 8/28/2017 5:43:49 PM EDT
[#14]
Quote HistoryOriginally Posted By NZen:
My preferred AR pistol is a 9" Windham in .300 Blackout with a Shockwave Blade, Tactical Link sling and Aimpoint red dot sight. I'm happy. http://zenfire.ws/Guns/300AAC_4.jpg Cheers! Nice .300! |
|
|
|
MO, USA
|
Posted: 8/30/2017 11:07:54 PM EDT
[Last Edit: AtotheR]
[#15]
Quote HistoryOriginally Posted By Unruely:
New photo of my full Aero Precision, 10.5" barrel, C.O.P. burnt bronze upper, Sig brace, Sparc II red dot, unknown knife. https://c1.staticflickr.com/3/2858/33364584523_d9228d737b_k.jpg17546734_1476573179021387_6905470321069975100_o Thanks! AtotheR |
|
|
|
Posted: 8/31/2017 12:18:11 AM EDT
[#16]
Quote HistoryOriginally Posted By Kye4all:
First pistol build, billet upper w Wylde 223 1/8 twist SS barrel and linear comp. |
|
|
|
TN, USA
|
Posted: 8/31/2017 9:01:48 PM EDT
[#17]
Once again this group has inspired me.
PSA CHF upper Aero lower Blade brace with KAK tube Colt carry handle from the EE |
|
|
|
Posted: 9/1/2017 8:10:25 AM EDT
[#18]
Quote HistoryOriginally Posted By mini14jac:
Once again this group has inspired me. http://i.imgur.com/WSddnVL.jpg?1 PSA CHF upper Aero lower Blade brace with KAK tube Colt carry handle from the EE Love a simple carry handled pistol.
|
|
|
|
VA, USA
|
Posted: 9/2/2017 11:24:47 AM EDT
[Last Edit: jeopardy98]
[#19]
My first AR pistol. I traded it for a G27.
Hardened Arms 10.5 upper Anderson lower PSA nickel boron BCG Vortex strikefire II Surefire G2X Shockwave blade and buffer I've since swapped the grip for a MOE K2+ in FDE PO sprayed the shockwave so I want to sell it and buy one in FDE. Planning to build a 300 BO with a stay quiet on the end next. 
|
|
|
|
Posted: 9/2/2017 1:16:55 PM EDT
[#20]
Quote HistoryOriginally Posted By jeopardy98:
My first AR pistol. I traded it for a G27. Hardened Arms 10.5 upper Anderson lower PSA nickel boron BCG Vortex strikefire II Surefire G2X Shockwave blade and buffer I've since swapped the grip for a MOE K2+ in THE PO sprayed the shockwave so I want to sell it and buy one in FDE. Planning to build a 300 BO with a stay quiet on the end next. https://i.imgur.com/s2P11Ew.jpg |
|
|
|
FL, USA
|
Posted: 9/2/2017 9:09:45 PM EDT
[Last Edit: Shrine]
[#21]
Diamondback DB9RPB10 - 9mm (10") Maxim CQB Brace BCM rail sections Magpul K grip, trigger guard, and AFG LWRC Enhanced Trigger Group Troy Battle Sights KNS Pins Not shown but just installed - BAD ambi selector Waiting on the Avalanche mod 2 charging handle - believe they ship next week A few notes for those interested: The CMC drop in triggers have the fail-to-reset problem - so I had the LWRC Enhanced trigger for a 300blk I was swapping out triggers on and decided to use it here instead - works great. The BCG is solid (weighted) so captured buffer springs won't work without removing the weight (roll pin to remove - but I'm not sure if that will affect anything else or not as I haven't tried it). Only have about 150 rounds of 115 Blazer ball through it so not much to say here other than it ran those rounds without any issues. Was VERY impressed with the accuracy, plucking the numbers off the targets like a laser. Uses Glock mags and has last round bolt hold open - comes with an ETS mag - both it and factory Glock mags were used and both ran great, no issues It's extremely fun to shoot. Heard others say how much they've enjoyed shooting 9mm AR's and they're right - very addictive, so much fun |
|
|
|
Posted: 9/2/2017 9:46:40 PM EDT
[#22]
The BCG is solid (weighted) so captured buffer springs won't work without removing the weight (roll pin - but don't suggest this as it will cause other issues) or buying a different BCG with a standard hollow.
What other issues are we talking here? |
|
|
|
FL, USA
|
Posted: 9/2/2017 11:52:34 PM EDT
[Last Edit: Shrine]
[#23]
Quote HistoryOriginally Posted By dogrobber13:
The BCG is solid (weighted) so captured buffer springs won't work without removing the weight (roll pin - but don't suggest this as it will cause other issues) or buying a different BCG with a standard hollow. What other issues are we talking here? EDIT - Changed the original post to reflect |
|
|
|
Posted: 9/3/2017 2:08:49 PM EDT
[#24]
I present what I lovingly call "The Little Bastard". AR pistol in 7.62. 8" barrel. Guys at the range know it's there.
 Attached File |
|
|
|
|
Posted: 9/3/2017 9:21:05 PM EDT
[#25]
Quote HistoryOriginally Posted By AchtungPanzer:
Whats up with your selector switch? |
|
|
|
NC, USA
|
Posted: 9/4/2017 5:16:39 PM EDT
[#26]
My submission. Oddly it's a 300AAC BLK in post 556
-Moore's Machine receiver -BCM LPK -Aero M4E1 upper w/ 9" rail -BA 8.3" Hansen stainless barrel -KAK micro flash can - Aero BUIS -SB PDW brace -PA dot from the parts bin as a placeholder 24 1/4" OAL |
|
|
|
Posted: 9/6/2017 2:15:51 PM EDT
[#27]
Cheapo pistol build. Well, pre-election cheapo, anyway.
 Attached File12.5" Ballistic Advantage barrel Guntec rail Field Sport cheapo RDS Tapco lower Other random used/extra parts |
|
|
|
VA, USA
|
Posted: 9/7/2017 10:08:42 PM EDT
[Last Edit: Timmy2Knives]
[#28]
Sweet 12.5! Looks good to me.
Nothing wrong with cheap so long as it works! You still got a name brand light and a few other parts on there haha |
|
|
|
Posted: 9/8/2017 4:36:56 PM EDT
[#29]
My first attempt at a pistol build.
PSA- blem lower ALG-ACT Trigger MFT-Grip Aero-Receiver PSA-BCG 10.5 BA Hanson Barrel ALG- Cola Warrior Rail Aimpoint H1 Going to try just using the bare pistol buffer tube before deciding on which brace to go with.  Attached File |
|
|
|
MI, USA
|
Posted: 9/8/2017 5:30:14 PM EDT
[Last Edit: IzzyShooter]
[#30]
My 7.5" 300 BLK pistol. I'll probably remove the magwell grip though. Just experimenting with extra stuff laying around.
Been having trouble getting it to cycle any brand of subsonics. I know that once I get my Form 1 back, adding a suppressor will likely cure that, but in the meantime, I've done almost everything I can think of to get it to cycle to bolt lock. Right now, it can cycle to having the bolt lock on the face of THE CARRIER, but not on the face of the bolt. I've opened the gas port to .125, I've taken the weights out of the buffer, I've added a Wolf reduced power buffer spring, and I changed the BCG to a lightweight Colt sporter model (milled off bottom rear section). Everything is lubed up with "Pig Lube". The only thing I haven't done yet is swap out the hammer spring for a reduced power one. Anyway, if someone wants to discuss possible solutions, please feel free to message or email me. Please don't clutter up this thread with discussion on it. Thanks 
EDIT TO ADD: Just made an impromptu "covert case" insert for a backpack, to carry this pistol. 
|
|
|
|
Posted: 9/8/2017 11:20:19 PM EDT
[#31]
|
|
|
|
|
Posted: 9/10/2017 6:54:50 PM EDT
[Last Edit: Kye4all]
[#32]
Quote HistoryOriginally Posted By Golden-Arm:
what handguard are you using here? Sorry for the late reply it's from Digital's AR, here is the link: https://digitals-ar-products.myshopify.com/collections/frontpage/products/ar-15-billet-223-5-56-wylde-a3-complete-pistol-7-5-upper-assembly  Attached File |
|
|
|
|
Posted: 9/11/2017 7:50:48 PM EDT
[#33]
|
|
|
|
OH, USA
|
Posted: 9/11/2017 9:11:24 PM EDT
[Last Edit: Heartbreak3r]
[#34]
Freshly assembled 300 Blackout pistol. Anderson lower, PSA 10.5" upper, Magpul K2 grip, trigger guard, extended mag release and BAD lever, SB M4 brace, CMC trigger pack, Bushnell TRS-25. |
|
|
OR, USA
|
Posted: 9/12/2017 2:09:44 AM EDT
[#35]
My 300 blackout build.
|
|
|
TX, USA
|
Posted: 9/12/2017 2:09:09 PM EDT
[Last Edit: RolledOatz]
[#36]
Just finished this pistol build: Quartercircle 10 Glock large frame lower Gibbz side charging upper Quartercircle 10 .40 cal bcg Maxim Defense CQB pistol brace Kaw Valley 8.5" 10mm Auto barrel Quartercircle 10 flash can SLR 9.7" handguard Trijicon MRO with low mount |
|
|
CA, USA
|
Posted: 9/12/2017 10:18:43 PM EDT
[#37]
Quote HistoryOriginally Posted By 20iner:
http://i.imgur.com/GbgEJ8O.jpg Do you like the changes? |
|
|
|
Posted: 9/12/2017 11:39:49 PM EDT
[#38]
|
|
|
|
OH, USA
|
Posted: 9/13/2017 9:23:15 AM EDT
[Last Edit: bigjunk1]
[#39]
7.5'', 10.5'' and 11.5''.
|
|
|
|
Posted: 9/13/2017 10:24:50 AM EDT
[#40]
Quote HistoryOriginally Posted By bigjunk1:
7.5'' and 11.5''. https://s26.postimg.org/5g2h80vix/1505080289042-1382910616.jpg https://s26.postimg.org/sit076x09/1505080328471-674268681.jpg |
|
|
|
MS, USA
|
Posted: 9/13/2017 11:37:08 AM EDT
[#41]
Quote HistoryOriginally Posted By TEMPLARKNIGHT:
What is attached to your Shockwave blade? Trying to plan for a build and that plastic piece looks like a good cheek-weld solution. Is it sturdy? http://www.missionfirsttactical.com/Products/Rifle-Stocks/EvolV-Battle-Stock-Attachment Here are some options...................https://www.ar15.com/forums/ar-15/CAA_SADDLE_OR_MFT_E_VOLV_on_a_SHOCKWAVE___WHO_DONE_IT_/122-691939/&page=1&anc=bottom#bottom |
|
|
OH, USA
|
Posted: 9/13/2017 9:11:02 PM EDT
[Last Edit: bigjunk1]
[#42]
Quote HistoryOriginally Posted By TEMPLARKNIGHT:
What is attached to your Shockwave blade? Trying to plan for a build and that plastic piece looks like a good cheek-weld solution. Is it sturdy? Quote HistoryOriginally Posted By TEMPLARKNIGHT:
Originally Posted By bigjunk1:
7.5'' and 11.5''. https://s26.postimg.org/5g2h80vix/1505080289042-1382910616.jpg https://s26.postimg.org/sit076x09/1505080328471-674268681.jpg The saddle surprisingly snaps on as if it was made for the Blade arm brace but I did need to file the little box that protrudes on the sides of the blade (between the wording) so the saddle would sit totally flush. I also filed a small indent at the front of the Blade for the bolt that holds the saddle on to fit across. Once you snap the saddle on you can easily see what needs done for it to sit flush and bolt on. The filing I did is not noticeable on the sides (no one can tell without pointing it out). The indent filed on the front for the bolt to fit across is visible without the saddle but is very small and looks natural IMO. The point is, the Blade is not ruined and basically looks the same as it originally did. It would be nice if they actually made a saddle for the Blade or if it was originally designed to fit a saddle. The Blade with the saddles attached is very comfortable. I have several AR's and a bunch of stocks and the Blade with a saddle is just as comfortable as any stock would be (better than most). I also like how the Blade with a MFT saddle looks so I see zero advantage in having a SBR. Having a SBR does have disadvantages though. Another advantage to the saddle is the storage. My 7.5'' AR is well balanced but my 11.5'' AR was front heavy so I added some weights to the storage areas of the saddle to balance it out. Without the storage areas I would be stuck with an unbalanced gun. |
|
|
FL, USA
|
Posted: 9/14/2017 7:16:39 PM EDT
[Last Edit: MisterNoisy]
[#43]
Just finished a 'truck gun' pistol because I had leftover parts from other builds and leftover parts is not something I deal with well. Also, it's kinda funny that there are so many different shades of 'FDE'.
Already have run about 100 through it, and it's more accurate than I thought it'd be. |
|
|
CO, USA
|
Posted: 9/15/2017 3:32:38 PM EDT
[#44]
Made a few updates to my 300 BLK. Swapped out my 10" rail for a 9" so the suppressor will be able to thread on and added some Strike Industries rail covers.
|
|
|
|
Posted: 9/15/2017 8:10:52 PM EDT
[#45]
 Attached FileBear Creek Arsenal upper w left hand side charger, Anderson Lower w JMT drop in Trigger. Ozark Tatical 45 irons, Blitzkrieg Components Chevron Front Sight Post, Holo Sun 510c, Armytek Partner C1 v3 weapons light (650 OTF) w Oden works mount. Daniel Defense grip, Magpul and BCM rail guards and other stuff in missing.  Attached File |
|
|
|
|
Posted: 9/15/2017 8:25:34 PM EDT
[#46]
|
|
|
|
|
Posted: 9/15/2017 9:59:42 PM EDT
[#47]
My CQBR clone that is still in pistol form. Once the gov'mint says it's alright, I'll be adding a Colt N1 or SOPMOD. Also getting a Surefire SOCOM RC in tan to top things off :D.
Specs: DD Mk18 SOCOM Stripped Upper (DD CHF 10.3" w/ .070 gas port, DD Mk18 RIS II FDE) Toolcraft BCG w/ Colt extractor spring PRI Gas Buster CH w/ Combat Latch in FDE Eotech EXPS3-0 Tan KAC 99051 Taupe front BUIS KAC 300m rear BUIS CQD sling mount Magpul AFG2 FDE Surefire M300C in Gear Sector offset mount Spike's lower (It'll most likely get a Colt M4/M4A1 or 80% M4A1 lower down the road) Giessele S3G 3.5lb trigger DSG Arms/Colt LPK Colt Ambi Selector BCM Mod 0 grip FDE CQD endplate KAK Blade FDE (Refinished in Alumahyde Magpul FDE) KAK Blade RE w/ Colt H buffer and Colt carbine spring 
|
|
|
|
OK, USA
|
Posted: 9/16/2017 12:36:17 AM EDT
[Last Edit: Csimpao]
[#48]
Upper:
-11.5 Colt Socom -FDE DD RIS ii -LMT front -Surefire m600/SR07 switch -Colt upper -Surefire 4 prong Lower: -Noveske lower -BAD ambi safety selector -Law tactical Gen 3 folding adapter -SB Tactical SOB 
|
|
|
GA, USA
|
Posted: 9/18/2017 7:32:49 AM EDT
[#49]
Quote HistoryOriginally Posted By RJeff21:
8.3" .300BLK https://www.AR15.Com/media/mediaFiles/294984/IMG_3121-308565.JPG |
|
|
|
Posted: 9/18/2017 4:58:05 PM EDT
[#50]
 Failed To Load Title |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
Attached File
Attached File
Attached File
Attached File
Attached File
Attached File
