User Panel
User Panel
User Panel
TX, USA
|
Posted: 9/19/2012 9:06:24 PM EDT
[Last Edit: The_Illuminator]
Show everyone your cerakoted AR's, rifles, pistols....
Mention color, specs, etc. Tungsten Grey 11.5 SBR Mega Arms billet upper and lower Mega Arms chrome trigger DD lower parts kit Spikes Tactical v2 10 inch SAR rail Spikes Tactical shorty dynacomp PWS enhanced buffer tube Magul STR stock Raptor ambi charging handle YHM Q.D.S Sights Kies nickel boron bcg BAD-ASS Stainless steel 11.5 BCM barrel syrac ordnance adjustable gas block Spikes tactical melonite gas tube Ergo grip 
|
|
|
AL, USA
|
Posted: 8/20/2015 2:47:49 PM EDT
[#1]
Quote HistoryOriginally Posted By cop1211: What are the colors on the green rifles? Quote HistoryOriginally Posted By cop1211: Originally Posted By SScot: http://i.imgur.com/R23SUjV.jpg http://i.imgur.com/qIz6hhE.jpg http://i.imgur.com/O6dHFDI.jpg http://i.imgur.com/90yvsWt.jpg http://i.imgur.com/yjAadRw.jpg http://i.imgur.com/63bXy5O.jpg http://i.imgur.com/Rft4Oyd.jpg http://i.imgur.com/HlEuQCA.jpg http://i.imgur.com/aKKQADW.jpg http://i.imgur.com/QzLmDA1.jpg What are the colors on the green rifles? |
|
|
|
Posted: 8/20/2015 3:18:55 PM EDT
[#2]
dunno how i missed this thread.
Decided to build this after I saw TheTacticalCoyote's M&P15 FDE build.
   |
|
|
|
FL, USA
|
Posted: 8/20/2015 7:08:40 PM EDT
[#3]
Quote HistoryOriginally Posted By SScot:
They are both standard OD Green Cerakote but one was taken in bright sunlight (KSG) and the other (700) in some shade. I may have changed phones too? Quote HistoryOriginally Posted By SScot:
Originally Posted By cop1211:
Originally Posted By SScot:
http://i.imgur.com/R23SUjV.jpg http://i.imgur.com/qIz6hhE.jpg http://i.imgur.com/O6dHFDI.jpg http://i.imgur.com/90yvsWt.jpg http://i.imgur.com/yjAadRw.jpg http://i.imgur.com/63bXy5O.jpg http://i.imgur.com/Rft4Oyd.jpg http://i.imgur.com/HlEuQCA.jpg http://i.imgur.com/aKKQADW.jpg http://i.imgur.com/QzLmDA1.jpg What are the colors on the green rifles? Do you know the exact number code? Is it H-236? |
|
|
AL, USA
|
Posted: 8/20/2015 7:35:33 PM EDT
[#4]
Yes sir, H-236. This is the exact one I got and mixed it 18 to 1. |
|
|
|
Posted: 8/26/2015 11:22:16 PM EDT
[Last Edit: Gr8Santini]
[#5]
Graphite black two tone. Some parts are done in "satin" and others in "flat". Bolt carrier in cerakote micro slick.
|
|
|
|
|
Posted: 8/28/2015 10:26:00 PM EDT
[#6]
Just your basic burnt bronze
|
|
|
|
|
Posted: 8/28/2015 10:31:47 PM EDT
[#7]
Quote HistoryOriginally Posted By Midas_touch:
Just your basic burnt bronze <a href="http://s253.photobucket.com/user/kdventus/media/DSC_03681.jpg.html" target="_blank">http://i253.photobucket.com/albums/hh78/kdventus/DSC_03681.jpg</a> That's a sweet build. mind sharing the specs? |
|
|
|
|
Posted: 8/28/2015 10:45:28 PM EDT
[#8]
Quote HistoryOriginally Posted By Gr8Santini:
That's a sweet build. mind sharing the specs? Quote HistoryOriginally Posted By Gr8Santini:
Originally Posted By Midas_touch:
Just your basic burnt bronze <a href="http://s253.photobucket.com/user/kdventus/media/DSC_03681.jpg.html" target="_blank">http://i253.photobucket.com/albums/hh78/kdventus/DSC_03681.jpg</a> That's a sweet build. mind sharing the specs? Upper- Gibbz side charge, cmmg bolt, Glock cut by adco, SLR intrepid 7" rail, Green Mountain 10.5" barrel, Bushnell TRS25 red dot Lower- QC10 Glock small frame, 9mm heavy buffer, magpul CTR stock, Magpul K2 grip, CMC 3.5# flat trigger |
|
|
|
MO, USA
|
Posted: 8/31/2015 2:19:36 PM EDT
[#9]
Looks Great!! Especially with that stock on there. Actually the paint job makes it and I might have to that to mine.
Quote HistoryOriginally Posted By Gr8Santini:
Graphite black two tone. Some parts are done in "satin" and others in "flat". Bolt carrier in cerakote micro slick. <a href="http://s837.photobucket.com/user/gr8santini/media/xcr22_zpsdymfixo8.jpg.html" target="_blank">http://i837.photobucket.com/albums/zz298/gr8santini/xcr22_zpsdymfixo8.jpg</a> <a href="http://s837.photobucket.com/user/gr8santini/media/xcr23_zpslwxry8gb.jpg.html" target="_blank">http://i837.photobucket.com/albums/zz298/gr8santini/xcr23_zpslwxry8gb.jpg</a> <a href="http://s837.photobucket.com/user/gr8santini/media/xcr24_zpsunmskoyu.jpg.html" target="_blank">http://i837.photobucket.com/albums/zz298/gr8santini/xcr24_zpsunmskoyu.jpg</a> |
|
|
|
Posted: 8/31/2015 11:51:05 PM EDT
[#10]
Quote HistoryOriginally Posted By ezed:
Looks Great!! Especially with that stock on there. Actually the paint job makes it and I might have to that to mine. Quote HistoryOriginally Posted By ezed:
Looks Great!! Especially with that stock on there. Actually the paint job makes it and I might have to that to mine. Originally Posted By Gr8Santini:
Graphite black two tone. Some parts are done in "satin" and others in "flat". Bolt carrier in cerakote micro slick. <a href="http://s837.photobucket.com/user/gr8santini/media/xcr22_zpsdymfixo8.jpg.html" target="_blank">http://i837.photobucket.com/albums/zz298/gr8santini/xcr22_zpsdymfixo8.jpg</a> <a href="http://s837.photobucket.com/user/gr8santini/media/xcr23_zpslwxry8gb.jpg.html" target="_blank">http://i837.photobucket.com/albums/zz298/gr8santini/xcr23_zpslwxry8gb.jpg</a> <a href="http://s837.photobucket.com/user/gr8santini/media/xcr24_zpsunmskoyu.jpg.html" target="_blank">http://i837.photobucket.com/albums/zz298/gr8santini/xcr24_zpsunmskoyu.jpg</a> Thanks man. It wouldn't have been possible without your ACR to XCR stock adapter!! |
|
|
|
TX, USA
|
Posted: 9/3/2015 11:07:52 PM EDT
[#11]
My first time using cerakote. Went the budget route with 4 oz testers and a Preval Sprayers from Home Depot. I can tell that it went on a little thicker than the 1-2 microns they say you get with the sprayers, but it is workable. i am really loving the finish and I am going to have to invest more into this if I am going to keep doing it.
Colors Used: High Heat C-series Sniper Grey Oven Cure Armor Black Before: 
After: 
|
|
|
|
Posted: 9/14/2015 2:02:48 AM EDT
[#12]
Just got my parts back from LTM Refinishing.
 |
|
|
|
|
Posted: 9/14/2015 8:56:57 AM EDT
[#13]
Quote HistoryOriginally Posted By ToyCop:
Just got my parts back from LTM Refinishing. http://www.hillierr.com/arfcom/ps90color.jpg Oh hell ya! How much did that run? |
|
|
|
|
Posted: 9/14/2015 12:36:58 PM EDT
[#14]
Quote HistoryOriginally Posted By jclaypool: Oh hell ya! How much did that run? Quote HistoryOriginally Posted By jclaypool: Originally Posted By ToyCop: Just got my parts back from LTM Refinishing. http://www.hillierr.com/arfcom/ps90color.jpg Oh hell ya! How much did that run? |
|
|
|
AZ, USA
|
Posted: 9/21/2015 5:09:40 PM EDT
[#15]
Sig 1911 C3 in Texas Tan and Desert Sand
|
|
|
KY, USA
|
Posted: 9/21/2015 9:50:35 PM EDT
[#16]
Quote HistoryOriginally Posted By Ryan_in_AZ:
Sig 1911 C3 in Texas Tan and Desert Sand http://i.imgur.com/LoN8SyM.jpg http://i.imgur.com/gAjFTiC.jpg Are they gray or is it the picture? If the pic is true I really like it. |
|
|
|
Posted: 9/22/2015 10:50:48 PM EDT
[#17]
 " />
|
|
|
|
|
Posted: 9/23/2015 2:41:54 AM EDT
[#18]
I was shocked at how many pages of stencils this took. |
|
|
|
|
Posted: 9/29/2015 1:45:56 AM EDT
[#19]
Quote HistoryOriginally Posted By creedlemyerjones: http://<a href=http://i28.photobucket.com/albums/c222/creedlemyerjones/IMG_20150619_1133162_zpslzxrlohx.jpg</a>" /> I was shocked at how many pages of stencils this took. |
|
|
|
|
Posted: 10/5/2015 11:28:52 PM EDT
[Last Edit: dangerdan]
[#20]
Para 1911 I did for a coworker.
Burnt Bronze, and graphite black   Another gun I did for a coworker. Remington Model 51. He chose the paint. I left the grips alone (had to find a reproduction for the broken original). Before:   Tungsten, SOCOM blue, and graphite black  |
|
|
|
AL, USA
|
Posted: 10/6/2015 10:02:31 AM EDT
[#21]
 |
|
|
MI, USA
|
Posted: 10/6/2015 7:16:43 PM EDT
[#22]
|
|
|
|
Posted: 10/8/2015 5:45:47 PM EDT
[#23]
|
|
|
|
|
Posted: 10/8/2015 9:23:47 PM EDT
[#24]
Quote HistoryOriginally Posted By TheTacticalCoyote: https://farm6.staticflickr.com/5635/22042604365_d1e537314f_b.jpgMPX by Two Sierra, on Flickr |
|
|
|
|
Posted: 10/11/2015 5:05:31 PM EDT
[#25]
|
|
|
|
|
Posted: 10/11/2015 9:56:45 PM EDT
[#26]
Quote HistoryOriginally Posted By creedlemyerjones:
http://i28.photobucket.com/albums/c222/creedlemyerjones/2015-10-08%2022.05.55_zpsttdeuvoj.jpg Looks badass! What type of cerakote did you use? Did you do any anything different/special between layers? I have done a rattle can version of Kryptek, but want to cerkoate my 308 in Nomad soon. |
|
|
|
|
Posted: 10/13/2015 10:32:18 AM EDT
[Last Edit: TheTacticalCoyote]
[#27]
|
|
|
|
TN, USA
|
Posted: 10/17/2015 11:46:36 AM EDT
[Last Edit: siraltitude]
[#28]
Here is my project, it's going to be an SBR so waiting on tax stamp and parts to finish rifle, but here is an idea what it will look like. Everything is Cerakote H-Series, and not counting prep work, from the time I started taping till last coat was applied and brought out of oven for final curing about 20 hours worth of work. No stencils used at all, high temp tape and free hand. Colors used are H-232Q Magpul O.D. Green, H-235Q Coyote Tan, H-213Q Battleship Grey, H-146Q Graphite Black, H-140Q Bright White, H-216Q Smith&Wesson Red.
First pic was the look I was going for. Also Micro Slicked some BCG with the Cerakote C-110Q. Update, tax stamped approved on 11-7-15, here is finished project. 
|
|
|
AL, USA
|
Posted: 10/17/2015 11:57:29 AM EDT
[Last Edit: OG1]
[#29]
    |
|
|
USA
|
Posted: 11/2/2015 12:09:30 AM EDT
[#30]
http://imgur.com/a/QAuSx
|
|
|
|
Posted: 11/2/2015 12:22:59 AM EDT
[#31]
|
|
|
|
|
Posted: 11/2/2015 4:22:05 AM EDT
[Last Edit: creedlemyerjones]
[#32]
Quote HistoryOriginally Posted By jclaypool:
Looks badass! What type of cerakote did you use? Did you do any anything different/special between layers? I have done a rattle can version of Kryptek, but want to cerkoate my 308 in Nomad soon. Quote HistoryOriginally Posted By jclaypool:
Originally Posted By creedlemyerjones:
http://i28.photobucket.com/albums/c222/creedlemyerjones/2015-10-08%2022.05.55_zpsttdeuvoj.jpg Looks badass! What type of cerakote did you use? Did you do any anything different/special between layers? I have done a rattle can version of Kryptek, but want to cerkoate my 308 in Nomad soon. Thanks!! It's all done in H-Series. I did do a few things special but its kinda hard to explain, there are 5 layers and you just gotta plan out each one. Thanks again, here is another one I just finished. 
|
|
|
|
|
Posted: 11/2/2015 8:36:34 PM EDT
[#33]
Quote HistoryOriginally Posted By creedlemyerjones:
Thanks!! It's all done in H-Series. I did do a few things special but its kinda hard to explain, there are 5 layers and you just gotta plan out each one. Thanks again, here is another one I just finished. http://i28.photobucket.com/albums/c222/creedlemyerjones/IMG_20151102_001257_zpsabf8zqoh.jpg Quote HistoryOriginally Posted By creedlemyerjones:
Originally Posted By jclaypool:
Originally Posted By creedlemyerjones:
http://i28.photobucket.com/albums/c222/creedlemyerjones/2015-10-08%2022.05.55_zpsttdeuvoj.jpg Looks badass! What type of cerakote did you use? Did you do any anything different/special between layers? I have done a rattle can version of Kryptek, but want to cerkoate my 308 in Nomad soon. Thanks!! It's all done in H-Series. I did do a few things special but its kinda hard to explain, there are 5 layers and you just gotta plan out each one. Thanks again, here is another one I just finished. http://i28.photobucket.com/albums/c222/creedlemyerjones/IMG_20151102_001257_zpsabf8zqoh.jpg Very nicely done. |
|
|
|
|
Posted: 11/5/2015 9:13:58 PM EDT
[#34]
NOW that's sweet ..this is like my wife in a shoe store now I know how they feel lol ..
Quote HistoryOriginally Posted By creedlemyerjones:
Thanks!! It's all done in H-Series. I did do a few things special but its kinda hard to explain, there are 5 layers and you just gotta plan out each one. Thanks again, here is another one I just finished. http://i28.photobucket.com/albums/c222/creedlemyerjones/IMG_20151102_001257_zpsabf8zqoh.jpg Quote HistoryOriginally Posted By creedlemyerjones:
Originally Posted By jclaypool:
Originally Posted By creedlemyerjones:
http://i28.photobucket.com/albums/c222/creedlemyerjones/2015-10-08%2022.05.55_zpsttdeuvoj.jpg Looks badass! What type of cerakote did you use? Did you do any anything different/special between layers? I have done a rattle can version of Kryptek, but want to cerkoate my 308 in Nomad soon. Thanks!! It's all done in H-Series. I did do a few things special but its kinda hard to explain, there are 5 layers and you just gotta plan out each one. Thanks again, here is another one I just finished. http://i28.photobucket.com/albums/c222/creedlemyerjones/IMG_20151102_001257_zpsabf8zqoh.jpg |
|
|
|
|
Posted: 11/8/2015 10:24:26 PM EDT
[#35]
|
|
|
|
TN, USA
|
Posted: 11/9/2015 10:42:20 AM EDT
[Last Edit: siraltitude]
[#36]
Well, i got bored with the black anodized coating on my DPMS GII Bull, so I went with Cerakote H-155Q Taurus Stainless.
|
|
|
|
Posted: 11/9/2015 7:31:49 PM EDT
[Last Edit: ankratz]
[#37]
No one seems to talk much about this Internet-wide, so I thought I'd chime in... I've been experimenting using H Series Cerakote on polymers and plastics, with good results.
Here are a couple of stocks I've done in Magpul FDE, 1:24 ratio, cured at 180 degrees for 2 hours. Haven't tried the A1 stock, but the B5 stock fits a smidge tighter on the tube, but nothing crazy. After working on a Colt receiver extension a couple times, it behaves like normal. My next focus will be using H Series on scopes and testing repeatability of the scopes (before and after baking). I'm going to start with lower end scopes, then if all pans out move up to my Nightforce F1 H59 (terrifying, but I think it will be fine) 
|
|
|
|
|
Posted: 11/9/2015 9:32:38 PM EDT
[#38]
Quote HistoryOriginally Posted By ankratz:
No one seems to talk much about this Internet-wide, so I thought I'd chime in... I've been experimenting using H Series Cerakote on polymers and plastics, with good results. Here are a couple of stocks I've done in Magpul FDE, 1:24 ratio, cured at 180 degrees for 2 hours. Haven't tried the A1 stock, but the B5 stock fits a smidge tighter on the tube, but nothing crazy. After working on a Colt receiver extension a couple times, it behaves like normal. My next focus will be using H Series on scopes and testing repeatability of the scopes (before and after baking). I'm going to start with lower end scopes, then if all pans out move up to my Nightforce F1 H59 (terrifying, but I think it will be fine) http://i6.photobucket.com/albums/y229/akratz/Cerakote/20151104_220512_RichtoneHDR_zpsfipsdhij.jpg http://i6.photobucket.com/albums/y229/akratz/Cerakote/20151104_220641_RichtoneHDR_zpsvrixmqck.jpg http://i6.photobucket.com/albums/y229/akratz/Cerakote/20151104_221028_RichtoneHDR_zpsuadn2yhq.jpg http://i6.photobucket.com/albums/y229/akratz/Cerakote/20151104_221038_RichtoneHDR_zpskwyv8kph.jpg I've had no issues at all doing polymers. I cure at 200 most of the time. I'm curious what you find with optics. I use C series for that. |
|
|
|
MO, USA
|
Posted: 11/13/2015 12:03:49 AM EDT
[#39]
Quote HistoryOriginally Posted By creedlemyerjones:
Thanks!! It's all done in H-Series. I did do a few things special but its kinda hard to explain, there are 5 layers and you just gotta plan out each one. Thanks again, here is another one I just finished. http://i28.photobucket.com/albums/c222/creedlemyerjones/IMG_20151102_001257_zpsabf8zqoh.jpg Quote HistoryOriginally Posted By creedlemyerjones:
Originally Posted By jclaypool:
Originally Posted By creedlemyerjones:
http://i28.photobucket.com/albums/c222/creedlemyerjones/2015-10-08%2022.05.55_zpsttdeuvoj.jpg Looks badass! What type of cerakote did you use? Did you do any anything different/special between layers? I have done a rattle can version of Kryptek, but want to cerkoate my 308 in Nomad soon. Thanks!! It's all done in H-Series. I did do a few things special but its kinda hard to explain, there are 5 layers and you just gotta plan out each one. Thanks again, here is another one I just finished. http://i28.photobucket.com/albums/c222/creedlemyerjones/IMG_20151102_001257_zpsabf8zqoh.jpg Do you coat for customers, or just yourself? If you're taking customers, IM me about a possible project. |
|
|
|
Posted: 11/22/2015 2:25:29 AM EDT
[#40]
|
|
|
|
|
Posted: 11/22/2015 2:30:03 AM EDT
[#41]
|
|
|
|
|
Posted: 11/22/2015 2:30:28 AM EDT
[#42]
|
|
|
|
|
Posted: 11/22/2015 2:30:51 AM EDT
[#43]
|
|
|
|
|
Posted: 11/22/2015 3:29:45 PM EDT
[#44]
|
|
|
|
|
Posted: 11/22/2015 6:03:20 PM EDT
[#45]
Quote HistoryOriginally Posted By ankratz:
<a href="http://s6.photobucket.com/user/akratz/media/Cerakote/20151120_222047_zpscy1sjr1n.jpg.html" target="_blank">http://i6.photobucket.com/albums/y229/akratz/Cerakote/20151120_222047_zpscy1sjr1n.jpg</a> <a href="http://s6.photobucket.com/user/akratz/media/Cerakote/20151120_231205_zpsp66luhcs.jpg.html" target="_blank">http://i6.photobucket.com/albums/y229/akratz/Cerakote/20151120_231205_zpsp66luhcs.jpg</a> <a href="http://s6.photobucket.com/user/akratz/media/Cerakote/20151120_231302_zpsvpkn19sw.jpg.html" target="_blank">http://i6.photobucket.com/albums/y229/akratz/Cerakote/20151120_231302_zpsvpkn19sw.jpg</a> That's a good match, what color is it? |
|
|
|
|
Posted: 11/23/2015 12:15:15 AM EDT
[#46]
Quote HistoryOriginally Posted By NUcadet07:
I beat my guns up enough on my own to generally think "faux distressed" finishes are stupid, but I've gotta admit that this one looks pretty good, the contrast and colors of the distressed finish pair up very nicely with the grips. ~Augee |
|
|
|
|
Posted: 11/23/2015 12:39:43 AM EDT
[#47]
Quote HistoryOriginally Posted By siraltitude:
Well, i got bored with the black anodized coating on my DPMS GII Bull, so I went with Cerakote H-155Q Taurus Stainless. http://i1310.photobucket.com/albums/s659/siraltitude71/Cerakote%20Projects/IMG_20151105_174504601_zpsqwybvpw1.jpg http://i1310.photobucket.com/albums/s659/siraltitude71/Cerakote%20Projects/IMG_20151105_174448875_zpszp50tesi.jpg http://i1310.photobucket.com/albums/s659/siraltitude71/Cerakote%20Projects/IMG_20151105_174428926_zpspd9n1vqy.jpg http://i1310.photobucket.com/albums/s659/siraltitude71/Cerakote%20Projects/IMG_20151105_174404860_zpsol4mysda.jpg Unique, and cool! |
|
|
|
|
Posted: 11/23/2015 12:43:18 AM EDT
[#48]
|
|
|
|
USA
|
Posted: 11/23/2015 2:01:38 AM EDT
[Last Edit: Old18C]
[#49]
Some GREAT looking weapons in this thread, will have to consider getting some of my toys redone while I can still use it as a deduction. Here are a couple I have had done.
My take down that I carry in m motorcycle on trips. 
One of my trip gifts to myself 
|
|
|
|
Posted: 11/24/2015 12:39:31 AM EDT
[#50]
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
