User Panel
User Panel
User Panel
|
Posted: 5/26/2006 7:46:16 PM EDT
[Last Edit: Stickman]
We may as well get a picture thread started. Before and after pictures are great, but sadly, I tend to forget the "before" pictures......
 Here is one of my first refinishing ventures. The upper receiver is Norrells grayish black, while is Norrells Matte black/ SOCOM. 
|
|
|
|
|
Posted: 5/25/2014 2:15:01 PM EDT
[#1]
Quote HistoryOriginally Posted By sksmedic:
My most recent kryptek attempt. Due to the lack of stencils online I had to make my own. Any feedback would be appreciated. http://i89.photobucket.com/albums/k213/sksmedic/2F19B9F4-5E06-4903-9377-412AD270D622-62861-00001FB2CAB013A1_zps25c0f569.jpg http://i89.photobucket.com/albums/k213/sksmedic/58AAA03F-9357-4211-95C0-FD977DFFE9BC-62861-00001FB2D461F37B_zpsb6a36443.jpg Killer 
|
|
|
|
FL, USA
|
Posted: 5/26/2014 9:32:41 PM EDT
[Last Edit: jrn156]
[#2]
Urban Kryptek |
|
|
PA, USA
|
Posted: 5/27/2014 11:08:02 AM EDT
[#3]
Quote HistoryOriginally Posted By TheTacticalCoyote:
Yes. From the end of the buffer tube to the end of the muzzle. You cannot measure it with a muzzle device or arm brace installed. It has to be a fixed, 'permanent' length. Quote HistoryOriginally Posted By TheTacticalCoyote:
Originally Posted By ILNG_Gray6119:
Originally Posted By TheTacticalCoyote:
Originally Posted By ILNG_Gray6119:
Just making sure everyone is interpreting the atf letter right, but that stated going from pistol to firearm to rifle and putting a vfg on any ar pistol makes it an aow, not that its ok to put one on an ar pistol. That isn't what it says at all. So I can for sure now put a vertical forgrip on my ar pistol as long as its overall length is greater than 26 inches? Yes. From the end of the buffer tube to the end of the muzzle. You cannot measure it with a muzzle device or arm brace installed. It has to be a fixed, 'permanent' length. So IF I want my build to legally be a pistol due to ridiculous state laws about not having a loaded rifle in the vehicle, I should keep it under 26"? |
|
|
|
Posted: 5/27/2014 11:44:09 AM EDT
[Last Edit: Shooter_Mc_Gavin]
[#4]
Cold Blued my receiver, after prep work from 100 to 5000 grit sand/polish Now I just put it together and wiped it down with microfiber, the barrel is brand new from remington its a rem-choke. So later ill put some flitz on it and get some of my fingerprints off of it....it has a mirror polish.   |
|
|
|
|
Posted: 5/27/2014 3:36:02 PM EDT
[#5]
Under federal law 26" doesn't make it a rifle. It makes it a firearm. A stock is what would make it a rifle. I don't know your state laws so you may want to check into it more.
|
|
|
|
|
Posted: 5/27/2014 4:20:24 PM EDT
[#6]
Quote HistoryOriginally Posted By PraesulPresul1:
Curious how you made that pattern? Quote HistoryOriginally Posted By PraesulPresul1:
Originally Posted By fishinnut1986:
My first rattle can job finished about a month ago: PSA blem lower & lpk PSA Freedom upper PSA premium bcg DD fixed rear BFG sling Boom... truck/beater <a href="http://s96.photobucket.com/user/fishnnut1986/media/camo1_zps91773d3c.jpg.html" target="_blank">http://i96.photobucket.com/albums/l174/fishnnut1986/camo1_zps91773d3c.jpg</a> <a href="http://s96.photobucket.com/user/fishnnut1986/media/camo2_zps655b748d.jpg.html" target="_blank">http://i96.photobucket.com/albums/l174/fishnnut1986/camo2_zps655b748d.jpg</a> Curious how you made that pattern? sponge and no technique what so ever 
|
|
|
|
|
Posted: 5/28/2014 6:20:49 AM EDT
[Last Edit: bansil]
[#7]
Quote HistoryOriginally Posted By Shooter_Mc_Gavin:
Cold Blued my receiver, after prep work from 100 to 5000 grit sand/polish Now I just put it together and wiped it down with microfiber, the barrel is brand new from remington its a rem-choke. So later ill put some flitz on it and get some of my fingerprints off of it....it has a mirror polish.
She turned out good, for her new exciting life with you...something old, something new, something borrowed and something blued  .... you may now kiss your.....oops sorry I was having horried flash backs of first wedding
Shotgun looks good 
|
|
|
|
OK, USA
|
Posted: 5/28/2014 6:50:08 PM EDT
[#8]
My recent venture, soon to be a 7.5" pistol build
VHT Engine paint, Burnt Copper 
|
|
|
WA, USA
|
Posted: 5/28/2014 11:15:09 PM EDT
[Last Edit: matticuski]
[#9]
Quote HistoryOriginally Posted By Str8shot_1985:
My recent venture, soon to be a 7.5" pistol build VHT Engine paint, Burnt Copper http://i160.photobucket.com/albums/t165/08h3007/temporary_zps890be984.jpg That color is amazing, matches all my mountain kit! Awesome . Can't wait to see a finished version of this. |
|
|
PA, USA
|
Posted: 5/28/2014 11:56:06 PM EDT
[#10]
Quote HistoryOriginally Posted By Stickman:
https://scontent-a-pao.xx.fbcdn.net/hphotos-frc1/t31.0-8/10003555_643163235732751_1789775839_o.jpg Hey Stickman, What colors are you using on this rifle? I really like how it appeals, from what I can tell, to the woodland type of environment. This would blend in quite well up here in the Northeastern Pennsylvania woods. |
|
|
AL, USA
|
Posted: 5/29/2014 1:30:47 PM EDT
[#11]
Romanian WASR 10/63, before the staining and coating the wood looked awful. Stock coloration matches the handguards, just the way the light reflects off of it.
|
|
|
|
Posted: 5/29/2014 2:52:49 PM EDT
[#12]
Quote HistoryOriginally Posted By Shooter_Mc_Gavin: Cold Blued my receiver, after prep work from 100 to 5000 grit sand/polish Now I just put it together and wiped it down with microfiber, the barrel is brand new from remington its a rem-choke. So later ill put some flitz on it and get some of my fingerprints off of it....it has a mirror polish. http://artactical.net/uploads/3/2/3/1/3231215/3886964_orig.jpg http://artactical.net/uploads/3/2/3/1/3231215/2513970_orig.jpg  |
|
|
|
OK, USA
|
Posted: 5/29/2014 5:29:33 PM EDT
[#13]
Quote HistoryOriginally Posted By matticuski:
That color is amazing, matches all my mountain kit! Awesome . Can't wait to see a finished version of this. Quote HistoryOriginally Posted By matticuski:
Originally Posted By Str8shot_1985:
My recent venture, soon to be a 7.5" pistol build VHT Engine paint, Burnt Copper http://i160.photobucket.com/albums/t165/08h3007/temporary_zps890be984.jpg That color is amazing, matches all my mountain kit! Awesome . Can't wait to see a finished version of this. Ask and you shall receive, well it's almost done anyway 
|
|
|
IL, USA
|
Posted: 5/29/2014 10:09:24 PM EDT
[#14]
Quote HistoryOriginally Posted By Str8shot_1985:
Ask and you shall receive, well it's almost done anyway http://i160.photobucket.com/albums/t165/08h3007/temporary_zps515f94e2.jpg Quote HistoryOriginally Posted By Str8shot_1985:
Originally Posted By matticuski:
Originally Posted By Str8shot_1985:
My recent venture, soon to be a 7.5" pistol build VHT Engine paint, Burnt Copper http://i160.photobucket.com/albums/t165/08h3007/temporary_zps890be984.jpg That color is amazing, matches all my mountain kit! Awesome . Can't wait to see a finished version of this. Ask and you shall receive, well it's almost done anyway http://i160.photobucket.com/albums/t165/08h3007/temporary_zps515f94e2.jpg How many coats and did you use a clear over it? |
|
|
OK, USA
|
Posted: 5/30/2014 9:24:45 AM EDT
[Last Edit: Str8shot_1985]
[#15]
Quote HistoryOriginally Posted By ILNG_Gray6119:
How many coats and did you use a clear over it? Quote HistoryOriginally Posted By ILNG_Gray6119:
Originally Posted By Str8shot_1985:
Originally Posted By matticuski:
Originally Posted By Str8shot_1985:
My recent venture, soon to be a 7.5" pistol build VHT Engine paint, Burnt Copper http://i160.photobucket.com/albums/t165/08h3007/temporary_zps890be984.jpg That color is amazing, matches all my mountain kit! Awesome . Can't wait to see a finished version of this. Ask and you shall receive, well it's almost done anyway http://i160.photobucket.com/albums/t165/08h3007/temporary_zps515f94e2.jpg How many coats and did you use a clear over it? 3 coats as directed by the can, next time it will be 3 coats and I'm going to try baking it too for a more durable finish. Edit: no clear, because all we had at work was gloss no matte or flat |
|
|
IL, USA
|
Posted: 5/30/2014 10:55:37 AM EDT
[Last Edit: ILNG_Gray6119]
[#16]
Quote HistoryOriginally Posted By Str8shot_1985:
3 coats as directed by the can, next time it will be 3 coats and I'm going to try baking it too for a more durable finish. Edit: no clear, because all we had at work was gloss no matte or flat Quote HistoryOriginally Posted By Str8shot_1985:
Originally Posted By ILNG_Gray6119:
Originally Posted By Str8shot_1985:
Originally Posted By matticuski:
Originally Posted By Str8shot_1985:
My recent venture, soon to be a 7.5" pistol build VHT Engine paint, Burnt Copper http://i160.photobucket.com/albums/t165/08h3007/temporary_zps890be984.jpg That color is amazing, matches all my mountain kit! Awesome . Can't wait to see a finished version of this. Ask and you shall receive, well it's almost done anyway http://i160.photobucket.com/albums/t165/08h3007/temporary_zps515f94e2.jpg How many coats and did you use a clear over it? 3 coats as directed by the can, next time it will be 3 coats and I'm going to try baking it too for a more durable finish. Edit: no clear, because all we had at work was gloss no matte or flat How orange is this in person? Definitely looking at this for my SPRish build. |
|
|
KY, USA
|
Posted: 5/30/2014 2:17:54 PM EDT
[#17]
I Duracoated this one. It works great where I live.
|
|
|
OK, USA
|
Posted: 5/30/2014 3:59:53 PM EDT
[#18]
It's way more orange in person, it looks like a flat metallic orange. My next build will be done in metallic titanium blue. |
|
|
|
Posted: 5/31/2014 1:03:39 PM EDT
[#19]
Recently refinished by Dan_Gray in Desert Sage, this is my mildly over-built 15-22.
|
|
|
|
|
Posted: 5/31/2014 1:26:42 PM EDT
[#20]
Quote HistoryOriginally Posted By gotfish:
Recently refinished by Dan_Gray in Desert Sage, this is my mildly over-built 15-22. http://www.smugmug.com/photos/i-mwg8hBZ/0/XL/i-mwg8hBZ-X2.jpg http://www.smugmug.com/photos/i-C997GN2/0/XL/i-C997GN2-X2.jpg http://www.smugmug.com/photos/i-b2CCLtj/0/XL/i-b2CCLtj-X2.jpg I like that color contrast. |
|
|
|
|
Posted: 5/31/2014 4:55:58 PM EDT
[#21]
Quote HistoryOriginally Posted By gotfish: Recently refinished by Dan_Gray in Desert Sage, this is my mildly over-built 15-22. http://www.smugmug.com/photos/i-mwg8hBZ/0/XL/i-mwg8hBZ-X2.jpg http://www.smugmug.com/photos/i-C997GN2/0/XL/i-C997GN2-X2.jpg http://www.smugmug.com/photos/i-b2CCLtj/0/XL/i-b2CCLtj-X2.jpg |
|
|
|
|
Posted: 5/31/2014 6:35:55 PM EDT
[#22]
 Thanks!
|
|
|
|
|
Posted: 5/31/2014 10:54:12 PM EDT
[#23]
Quote HistoryOriginally Posted By gotfish:
Recently refinished by Dan_Gray in Desert Sage, this is my mildly over-built 15-22. http://www.smugmug.com/photos/i-mwg8hBZ/0/XL/i-mwg8hBZ-X2.jpg http://www.smugmug.com/photos/i-C997GN2/0/XL/i-C997GN2-X2.jpg http://www.smugmug.com/photos/i-b2CCLtj/0/XL/i-b2CCLtj-X2.jpg Nice color choices. Nice work by Dan. I bet this color will combo will be copied a lot. |
|
|
|
OR, USA
|
Posted: 6/2/2014 3:26:07 PM EDT
[#24]
Still need to coat the scope mount, scope and suppressor, but did the rest in Norrells Moly Tan.
|
|
|
|
Posted: 6/4/2014 8:23:44 AM EDT
[#25]
 |
|
|
|
|
Posted: 6/4/2014 7:26:19 PM EDT
[#26]
Quote HistoryOriginally Posted By PRod:
<a href="http://s1290.photobucket.com/user/PRod616/media/Noveske_SBR_4_zps3149e17e.jpg.html" target="_blank">http://i1290.photobucket.com/albums/b526/PRod616/Noveske_SBR_4_zps3149e17e.jpg</a> Damn that makes me hard 
|
|
|
|
FL, USA
|
Posted: 6/5/2014 9:13:26 PM EDT
[#27]
Pretty happy with how they came out. Now to use them and get that sweet Tier 1 worn look
Fiance wine bottle project in the background
|
|
|
|
Posted: 6/6/2014 12:00:55 PM EDT
[Last Edit: tdsmart]
[#28]
|
|
|
|
CA, USA
|
Posted: 6/7/2014 3:32:23 PM EDT
[#29]
|
|
|
WA, USA
|
Posted: 6/8/2014 3:35:46 PM EDT
[#30]
Quote HistoryOriginally Posted By mrc44:
finally painted my pride n joy, feel like a dick I have been posting this thing everywhere the last few days, just a proud owner thats all <a href="http://s419.photobucket.com/user/kasual44/media/Mobile%20Uploads/5158F510-7797-400A-8655-D59542303234.jpg.html" target="_blank">http://i419.photobucket.com/albums/pp280/kasual44/Mobile%20Uploads/5158F510-7797-400A-8655-D59542303234.jpg</a> <a href="http://s419.photobucket.com/user/kasual44/media/Mobile%20Uploads/B60AC0A6-86AA-46FD-85AA-EC9F50A4989E.jpg.html" target="_blank">http://i419.photobucket.com/albums/pp280/kasual44/Mobile%20Uploads/B60AC0A6-86AA-46FD-85AA-EC9F50A4989E.jpg</a> <a href="http://s419.photobucket.com/user/kasual44/media/Mobile%20Uploads/9709E39E-5AC9-4B19-BAC7-BFA5867E8418.jpg.html" target="_blank">http://i419.photobucket.com/albums/pp280/kasual44/Mobile%20Uploads/9709E39E-5AC9-4B19-BAC7-BFA5867E8418.jpg</a> <a href="http://s419.photobucket.com/user/kasual44/media/Mobile%20Uploads/BFEF5580-0ABE-49F2-A333-A736677B1711.jpg.html" target="_blank">http://i419.photobucket.com/albums/pp280/kasual44/Mobile%20Uploads/BFEF5580-0ABE-49F2-A333-A736677B1711.jpg</a> That's nice man, one of the nicest ive seen in a while, people tend to forget the original purpose was to camoflauge not make it look super cool, some of these defeat the purpose. |
|
|
CA, USA
|
Posted: 6/8/2014 6:17:36 PM EDT
[#31]
Thanks I appreciate it. Never really been into the perfect patterns, more into the filthy looking camo with overspray to blend it and get rid of the sharp edges of the rifle. No stencils no sponges I just sprayed from different distances and with different pressure on the cans
|
|
|
CA, USA
|
Posted: 6/8/2014 6:23:09 PM EDT
[#32]
Quote HistoryOriginally Posted By tdsmart:
An old beater shotgun I did a couple days ago. Used a matte clear but still don't like the amount of shine it has. Don't think I'm gonna use any clear on the next project. <a href="http://s1072.photobucket.com/user/terrydsmart/media/Mobile%20Uploads/IMG_20140606_102013215_HDR.jpg.html" target="_blank">http://i1072.photobucket.com/albums/w361/terrydsmart/Mobile%20Uploads/IMG_20140606_102013215_HDR.jpg</a> <a href="http://s1072.photobucket.com/user/terrydsmart/media/Mobile%20Uploads/IMG_20140606_102139966_HDR.jpg.html" target="_blank">http://i1072.photobucket.com/albums/w361/terrydsmart/Mobile%20Uploads/IMG_20140606_102139966_HDR.jpg</a> <a href="http://s1072.photobucket.com/user/terrydsmart/media/Mobile%20Uploads/IMG_20140606_101743989_HDR.jpg.html" target="_blank">http://i1072.photobucket.com/albums/w361/terrydsmart/Mobile%20Uploads/IMG_20140606_101743989_HDR.jpg</a> <a href="http://s1072.photobucket.com/user/terrydsmart/media/Mobile%20Uploads/IMG_20140606_102859099_HDR.jpg.html" target="_blank">http://i1072.photobucket.com/albums/w361/terrydsmart/Mobile%20Uploads/IMG_20140606_102859099_HDR.jpg</a> Very cool, did you use a extra flat clear or more of a gloss? I like the punisher logo on the stock, I am thinking of coming up with a logo for all my mags to tell them apart |
|
|
NC, USA
|
Posted: 6/10/2014 11:56:38 AM EDT
[Last Edit: hipower90]
[#33]
|
|
|
|
Posted: 6/10/2014 4:03:42 PM EDT
[#34]
Quote HistoryOriginally Posted By mrc44:
Very cool, did you use a extra flat clear or more of a gloss? I like the punisher logo on the stock, I am thinking of coming up with a logo for all my mags to tell them apart Quote HistoryOriginally Posted By mrc44:
Originally Posted By tdsmart:
An old beater shotgun I did a couple days ago. Used a matte clear but still don't like the amount of shine it has. Don't think I'm gonna use any clear on the next project. <a href="http://s1072.photobucket.com/user/terrydsmart/media/Mobile%20Uploads/IMG_20140606_102013215_HDR.jpg.html" target="_blank">http://i1072.photobucket.com/albums/w361/terrydsmart/Mobile%20Uploads/IMG_20140606_102013215_HDR.jpg</a> <a href="http://s1072.photobucket.com/user/terrydsmart/media/Mobile%20Uploads/IMG_20140606_102139966_HDR.jpg.html" target="_blank">http://i1072.photobucket.com/albums/w361/terrydsmart/Mobile%20Uploads/IMG_20140606_102139966_HDR.jpg</a> <a href="http://s1072.photobucket.com/user/terrydsmart/media/Mobile%20Uploads/IMG_20140606_101743989_HDR.jpg.html" target="_blank">http://i1072.photobucket.com/albums/w361/terrydsmart/Mobile%20Uploads/IMG_20140606_101743989_HDR.jpg</a> <a href="http://s1072.photobucket.com/user/terrydsmart/media/Mobile%20Uploads/IMG_20140606_102859099_HDR.jpg.html" target="_blank">http://i1072.photobucket.com/albums/w361/terrydsmart/Mobile%20Uploads/IMG_20140606_102859099_HDR.jpg</a> Very cool, did you use a extra flat clear or more of a gloss? I like the punisher logo on the stock, I am thinking of coming up with a logo for all my mags to tell them apart I used the Rustoleum matte clear. |
|
|
|
|
Posted: 6/12/2014 3:47:41 PM EDT
[#35]
Savage model 298 pump 22 short/LR This customer had this gun in his boat for years and years and he didn't want to do a total refinish (remove all pits, polish, etc..), but like an idiot I didn't take before pictures, but here it is after I cleaned up all the internals and cold blued the receiver and barrel with just enough sanding/polishing to get rid of all the rust.     |
|
|
|
NC, USA
|
Posted: 6/18/2014 12:49:25 PM EDT
[#36]
Took the nydro dipped quad rail off. Used some reg ol carbine guards. Saved over 1/2'lb. 6lb 15oz as shown.
Rattle can work(and a bit of brush work) job to a Guntec modular rail. 
|
|
|
NC, USA
|
Posted: 6/19/2014 11:59:52 AM EDT
[#37]
Pics of both. They're basically done. ..for now. I swear
. Combos of DIY Gun Skins, rattle can, and hydro dipped(Liquid Gunworks). Don't want to do the grips. Might lose the awesome rubber-ish feel of the MOE+ awesomeness. Plus your hand should always be over it when it counts.
|
|
|
|
Posted: 6/20/2014 11:43:22 PM EDT
[#38]
Here is the Savage 29B pump 22LR I just finished cold bluing and refinishing the wood, it was a rust bucket when the guy brought it to me, but its in way better shape now.     |
|
|
|
WA, USA
|
Posted: 6/21/2014 5:51:43 AM EDT
[#39]
Quote HistoryOriginally Posted By Shooter_Mc_Gavin:
Here is the Savage 29B pump 22LR I just finished cold bluing and refinishing the wood, it was a rust bucket when the guy brought it to me, but its in way better shape now. http://artactical.net/uploads/3/2/3/1/3231215/5733490_orig.jpg http://artactical.net/uploads/3/2/3/1/3231215/5367906_orig.jpg http://artactical.net/uploads/3/2/3/1/3231215/1333732_orig.jpg http://artactical.net/uploads/3/2/3/1/3231215/7015146_orig.jpg Nice I recently acquired, well my son did from grandpa a savage model 29 ( i believe) tkedown. it has a octagon barrel and all looks good on the inside, but not quite like that and ours has a chipped stock right towards the action.. |
|
|
|
Posted: 6/21/2014 6:42:05 AM EDT
[#40]
This one was a rust bucket when I got it, missing screws, etc... shoots awesome though.
Quote HistoryOriginally Posted By mustangfreek: Nice I recently acquired, well my son did from grandpa a savage model 29 ( i believe) tkedown. it has a octagon barrel and all looks good on the inside, but not quite like that and ours has a chipped stock right towards the action.. Quote HistoryOriginally Posted By mustangfreek: Originally Posted By Shooter_Mc_Gavin: Here is the Savage 29B pump 22LR I just finished cold bluing and refinishing the wood, it was a rust bucket when the guy brought it to me, but its in way better shape now. http://artactical.net/uploads/3/2/3/1/3231215/5733490_orig.jpg http://artactical.net/uploads/3/2/3/1/3231215/5367906_orig.jpg http://artactical.net/uploads/3/2/3/1/3231215/1333732_orig.jpg http://artactical.net/uploads/3/2/3/1/3231215/7015146_orig.jpg Nice I recently acquired, well my son did from grandpa a savage model 29 ( i believe) tkedown. it has a octagon barrel and all looks good on the inside, but not quite like that and ours has a chipped stock right towards the action.. |
|
|
|
|
Posted: 6/28/2014 6:58:46 PM EDT
[Last Edit: guns762]
[#41]
Because black is boring
The .338 Lapua and the .308AR were done and posted before. The midlength and 20", I painted yesterday. Alumahyde II, black, dark earth, coyote, and desert tan. Sponge painted.  </a> IMG_20140628_161732_144-1 by guns762, on Flickr" />
 </a> IMG_20140628_161550_523 by guns762, on Flickr" />
 </a> IMG_20140627_142546_176 by guns762, on Flickr" />
 </a> IMG_20140628_161824_178 by guns762, on Flickr" />
 </a> IMG_20140628_161918_427-1 by guns762, on Flickr" />
 </a> IMG_20140628_162018_867-1 by guns762, on Flickr" />
|
|
|
|
WA, USA
|
Posted: 6/28/2014 7:10:51 PM EDT
[#42]
Finally got the gusto to parttialy paint one of my guns, i really like the kyrptec patterns so gave my savage fv-sr a quick makeover until i can save up for the boyds stock...It turned out allright, of course i kinda redid it as i was going along..lol
 " />
|
|
|
|
Posted: 6/29/2014 4:21:42 PM EDT
[Last Edit: OG1]
[#43]
Cerakote - Graphite Black
Before:  After:   Did some more work on the checkering and added Magpul Grips:   |
|
|
|
WA, USA
|
Posted: 6/29/2014 10:16:42 PM EDT
[Last Edit: mustangfreek]
[#44]
Quote HistoryOriginally Posted By SScot:
Cerakote - Graphite Black Before: http://i.imgur.com/J2Q5Njp.jpg After: http://i.imgur.com/Eyl5Ant.jpg http://i.imgur.com/VXOeRh4.jpg 
Damn, that looks sharp..Nice !! So did yo uchecker it yourself or have that done..i like that touch.. I have the same pistol and was thinking of doing something very similiar..one thing , that looks clean and then to get rid of the damn safety crap they print on the gun..lol |
|
|
|
Posted: 6/29/2014 10:37:45 PM EDT
[#45]
Quote HistoryOriginally Posted By mustangfreek: Damn, that looks sharp..Nice !! So did yo uchecker it yourself or have that done..i like that touch.. I have the same pistol and was thinking of doing something very similiar..one thing , that looks clean and then to get rid of the damn safety crap they print on the gun..lol Quote HistoryOriginally Posted By mustangfreek: Originally Posted By SScot: Cerakote - Graphite Black Before: http://i.imgur.com/J2Q5Njp.jpg After: http://i.imgur.com/Eyl5Ant.jpg http://i.imgur.com/VXOeRh4.jpg http://i.imgur.com/VXOeRh4.jpg]http://i.imgur.com/VXOeRh4.jpg]http://i.imgur.com/VXOeRh4.jpg Damn, that looks sharp..Nice !! So did yo uchecker it yourself or have that done..i like that touch.. I have the same pistol and was thinking of doing something very similiar..one thing , that looks clean and then to get rid of the damn safety crap they print on the gun..lol I did checker the front strap. This was my second job, the last was on an aluminum frame and it was so much easier, this stainless stuff was very very difficult. Here is the last on I did: |
|
|
|
TX, USA
|
Posted: 6/30/2014 9:14:14 PM EDT
[#46]
Painted my Stag the other day.
|
|
|
|
Posted: 6/30/2014 10:16:22 PM EDT
[#47]
Quote HistoryOriginally Posted By COLT45AGGIE:
Painted my Stag the other day. <a href="http://s84.photobucket.com/user/aggiebob07/media/F327914F-ADFF-464D-B371-ED5127750367.jpg.html" target="_blank">http://i84.photobucket.com/albums/k34/aggiebob07/F327914F-ADFF-464D-B371-ED5127750367.jpg</a> <a href="http://s84.photobucket.com/user/aggiebob07/media/597AAC48-37F6-41EF-AE36-8539A6B64004.jpg.html" target="_blank">http://i84.photobucket.com/albums/k34/aggiebob07/597AAC48-37F6-41EF-AE36-8539A6B64004.jpg</a> I can dig it
|
|
|
|
|
Posted: 7/2/2014 12:22:58 AM EDT
[#48]
Quote HistoryOriginally Posted By SecretSquirell:
I can dig it Quote HistoryOriginally Posted By SecretSquirell:
Originally Posted By COLT45AGGIE:
Painted my Stag the other day. <a href="http://s84.photobucket.com/user/aggiebob07/media/F327914F-ADFF-464D-B371-ED5127750367.jpg.html" target="_blank">http://i84.photobucket.com/albums/k34/aggiebob07/F327914F-ADFF-464D-B371-ED5127750367.jpg</a> <a href="http://s84.photobucket.com/user/aggiebob07/media/597AAC48-37F6-41EF-AE36-8539A6B64004.jpg.html" target="_blank">http://i84.photobucket.com/albums/k34/aggiebob07/597AAC48-37F6-41EF-AE36-8539A6B64004.jpg</a> I can dig it Thanks! |
|
|
|
|
Posted: 7/2/2014 6:35:01 PM EDT
[#49]
Quote HistoryOriginally Posted By mrc44:
finally painted my pride n joy, feel like a dick I have been posting this thing everywhere the last few days, just a proud owner thats all <a href="http://s419.photobucket.com/user/kasual44/media/Mobile%20Uploads/5158F510-7797-400A-8655-D59542303234.jpg.html" target="_blank">http://i419.photobucket.com/albums/pp280/kasual44/Mobile%20Uploads/5158F510-7797-400A-8655-D59542303234.jpg</a> <a href="http://s419.photobucket.com/user/kasual44/media/Mobile%20Uploads/B60AC0A6-86AA-46FD-85AA-EC9F50A4989E.jpg.html" target="_blank">http://i419.photobucket.com/albums/pp280/kasual44/Mobile%20Uploads/B60AC0A6-86AA-46FD-85AA-EC9F50A4989E.jpg</a> <a href="http://s419.photobucket.com/user/kasual44/media/Mobile%20Uploads/9709E39E-5AC9-4B19-BAC7-BFA5867E8418.jpg.html" target="_blank">http://i419.photobucket.com/albums/pp280/kasual44/Mobile%20Uploads/9709E39E-5AC9-4B19-BAC7-BFA5867E8418.jpg</a> <a href="http://s419.photobucket.com/user/kasual44/media/Mobile%20Uploads/BFEF5580-0ABE-49F2-A333-A736677B1711.jpg.html" target="_blank">http://i419.photobucket.com/albums/pp280/kasual44/Mobile%20Uploads/BFEF5580-0ABE-49F2-A333-A736677B1711.jpg</a> I MUST paint my next build like this |
|
|
|
CO, USA
|
Posted: 7/2/2014 9:54:19 PM EDT
[#50]
Here's a pic of my first attempt. I've included a before and after. Thanks again to Guns762 for all the help. With a little more practice, I will give a go on the entire rifle.
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
