User Panel
What did PoH do to it besides installing the spiker FSB?
Looks fantastic! Hows the bluing? |
|
Mario removed the original front sight base and added the spike front sight base, welded up original selector notch/markings and added new selector notches/markings, changed-out the two rivets on the trigger guard and added the four rivets by doing some welding work on the trigger guard and receiver, and did the re-finish. There's likely other smaller but PITA issues he worked on that I'm leaving out. Finish is very good.
|
|
Did he weld up the barrel pin area to give it the smooth threaded barrel look?
|
|
Oh the jealousy!
That's the last AK I want for my collection and then I'd be satisfied. Well satisfied for at least a few months. |
|
Super Neat Rifle ! Does Piece of History Firearms have a website ?
|
|
Indeed:
http://www.pieceofhistoryfirearms.com/ I just received my Type 56 Stamped Spiker from PoHF, a great rifle. Mario is the best! |
|
I did a milled Mak 90 just like that except the furniture was Ironwood Designs. I hope that Legend you used was a beater, I have two and they are so beautiful I can't imagine refinishing them.
|
|
I'm a bit of a traditionalist and thought the Legend would be better served modified. The Legend is not exactly a "correct" variant of any Chinese rifle and was put together more for the American buying market. It's kind of a mix of a Russsian Type III and a Chinese milled Type 56. I thought since the Legend didn't even have the right trigger guard rivet style as the early Chinese milled rifles anyway, it was a good choice for a makeover. And, I didn't want to play the US parts game and wanted to keep it all Chinese. I've since put an early Chinese military upper hanguard with the vent cut-outs on the rifle and replaced the sling with an ultra early, rare one. It just enjoy that early look on it.
But to answer your question, the Legend used was not pristine and is also a duplicate. |
|
Very very nice! It looks like you hit on all the details, but there is one you can't see, so I have to ask: Did you have the correct AK-47 "threaded block with 3 rivets" pistol grip boss riveted onto the receiver, or does the rifle still use the AKM style threaded block that drops into the square hole in the receiver?
|
|
It still retains the original set-up as put on the Legends by Polytech. I wasn't worried about something that wouldn't be seen unless the pistol grip was off. Just extra money spent that could go toward something else. Didn't plan on using it without the pistol grip so it didn't matter too much to me.
I've got a few of those early Type 56 vented uppers. Interestingly, I found them in a little gunshop with MAK-90 furniture. When the holidays have passed on things settle down, I'll put some early Chinese Type 56 items on the sale block. The vented uppers are truly a nice touch for anyone's early clone project. |
|
Looks great, and I'd love to have a milled Spiker.....but for some reason I sorta like the 7.62 Chicom Spiker with an original stamped receiver. And I could never bring myself to use a Legend as a Donor.
Somebody on another forum actually created an orange bakelite Spiker. |
|
I would've definately not done it on a brand new Legend but that one was an extra Legend I had and had been given a poor refinish sometime during its life. I thought it was a good candidate for giving it new life as something else.
I also like the stamped receiver spike bayonet Type 56 rifles. There was a member on the other board quite a long time ago that had one with a bit of a worn finish. He decided to give it an overall BFPU finish which made that rifle just scream with character. His was the first and, so far, the last one I've seen with a BFPU finish. It was a very unique looking rifle after that. I think they're just awesome with a worn finish. |
|
Gorgeous Marco |
|
Absolutely Gorgeous!
If i ever get the means to get a piece like that together or anything like it, I'll definitely check out POHF. Love the attention to detail, from the new selector notches to the correction of the pistol grip rivets. Bravo!!! |
|
Quoted:
Absolutely Gorgeous! If i ever get the means to get a piece like that together or anything like it, I'll definitely check out POHF. Love the attention to detail, from the new selector notches to the correction of the pistol grip trigger guard rivets. Bravo!!! |
|
Quoted:
Quoted:
Absolutely Gorgeous! If i ever get the means to get a piece like that together or anything like it, I'll definitely check out POHF. Love the attention to detail, from the new selector notches to the correction of the pistol grip trigger guard rivets. Bravo!!! *thanks |
|
Quoted:
Quoted:
I would've definately not done it on a brand new Legend but that one was an extra Legend I had and had been given a poor refinish sometime during its life. I thought it was a good candidate for giving it new life as something else. I also like the stamped receiver spike bayonet Type 56 rifles. There was a member on the other board quite a long time ago that had one with a bit of a worn finish. He decided to give it an overall BFPU finish which made that rifle just scream with character. His was the first and, so far, the last one I've seen with a BFPU finish. It was a very unique looking rifle after that. I think they're just awesome with a worn finish. here you go... http://i678.photobucket.com/albums/vv145/singtar/Firearms/AK47polytechlegend.jpg Nice! Well, that makes two I've seen then - there was another that was a bit different. A bit more work on the wear in some places and some worn wood, you'll be there on that one. Good work! |
|
Rayman, you described your Type 56 copy as "a well-balanced rifle."
This judgment is correct. To my mind the original ChiCom automatic rifle was the finest, most useful 7.62mm Kalashnikov ever made. Anywhere ... anytime. Congratulations !!! |
|
I have to agree with you. It's weird - I've shouldered and fired many countries' rifle, milled and stamped, and as far as commercially available/sold semi-auto Kalashnikovs are concerned, I've found the Polytech Legend to be a nice rifle. It's one of those that just "feels right" when shouldered. They've got the sleek blued finish, great fit-to-finish with the wood and metal, and just look nice.
|
|
Awesome Type 56 clone Rayman1!
MUST RESIST THE TEMPTATION TO TURN MY LEGEND INTO A TYPE 56 CLONE |
|
No peer pressure, but...
DO IT! There will always be Polytech Legends out there should you want an original. It's just nice to have something a bit different. |
|
I hope you don't mind me putting this here Rayman1 since it's relavent to your PRC clone.
Type 56 PDF ETA-If you still have one of those slotted upper handguards, shoot me an IM Rayman1. I think I'm caving. Resistance is futile. |
|
Rayman, beautiful rifle !! Where did you find your Chinese sling?
Thanks Stephen |
|
According to the fellow I got it from, it was brought back from Vietnam if you mean the one in the last photo of it.
|
|
Quoted:
What type of finish was used? Is it blued? That's what I was looking at. It looks almost like it was parked and painted gray. I believe the original is blued. |
|
Some people are a bit confused about blued finishes. There are many types - matte blue, polished blue, etc. The Chinese Type 56 rifles also ranged in their blued finishes. The commercially manufactured Chinese rifles such as the Norinco and Polytech rifles are a bit misleading regarding finishes. This probably because they're the only examples most people in this hobby have to use as a reference that they've actually seen. The older Chinese Type 56 rifles had matte and polished finishes. Most of the milled receiver Chinese Type 56 rifles I've encountered had more of the matte-type blued finish. No telling why.
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.