User Panel
User Panel
User Panel
|
Posted: 7/1/2005 1:26:55 PM EDT
VLTOR never being satisfied with their work have GREATLY improved their lights mounts (IMHO). First thing they did is make them lighter. They inserted a roll pin through the mounting screw (to retain it). Then the captured the thumb nut. Those of you that have ever taken apart a thumb screw mount (and have had the parts fall off and get lost) will appreciate all the work they have done to secure everything!
 C4 www.gandrtactical.com E-Series on the left and G-Series on the right  Notice the roll pin on the left  Notice the captured thumb mount on the right 
|
|
|
|
Posted: 7/1/2005 1:29:32 PM EDT
[#1]
Exactly what I've been waiting for. I see one in my future...
|
|
|
|
Posted: 7/2/2005 11:57:30 AM EDT
[#2]
+1 C4iGrant, email inbound. |
|
|
|
|
Posted: 7/3/2005 12:11:59 PM EDT
[#3]
taggage
|
|
|
|
Posted: 7/7/2005 9:14:23 PM EDT
[#4]
What are the diameters of the executive and nitrolon flashlights? I have a couple of Streamlight lights I may want to use with one of those Vltor mounts.
|
|
|
|
Posted: 7/8/2005 7:22:36 PM EDT
[#5]
That's what these were made for. Amongst other lights. The lights run about a one inch diameter tube. A lot of folks just stick them in a set of one inch scope rings. These are a huge improvement over a simple scope ring. |
|
|
|
|
Posted: 7/9/2005 3:49:13 AM EDT
[#6]
The E-series flashlight has a bore diameter of .824 inches. The G-series has a bore of 1.040 inches. C4 |
|
|
|
|
Posted: 7/9/2005 4:05:10 AM EDT
[#7]
So these new mounts are available now?
|
|
|
|
Posted: 7/9/2005 4:06:59 AM EDT
[#8]
Yes I have them in stock and on my web site (under the VLTOR section). C4 www.gandrtactical.com |
|
|
|
|
Posted: 7/9/2005 4:38:50 AM EDT
[#9]
Compatible with the nitrolon lights? Is the old package with the Vltor back on? |
||
|
|
|
Posted: 7/9/2005 4:59:26 AM EDT
[#10]
Yes, the G2 will work with the G-Series. C4 |
|||
|
|
|
Posted: 7/10/2005 4:33:51 PM EDT
[#11]
tag
|
|
|
|
Posted: 7/11/2005 4:59:28 AM EDT
[#12]
Grant,
Is it correct to assume the G-Series mount will work with the Pentagon lights? |
|
|
|
Posted: 7/11/2005 6:00:01 AM EDT
[#13]
Grant do you have a weight on these by any chance?
|
|
|
|
Posted: 7/11/2005 6:08:05 AM EDT
[#14]
Where are the Larue 1" light mounts?
|
|
|
|
Posted: 7/11/2005 3:30:59 PM EDT
[#15]
No you would need the classic series. C4 |
|
|
|
|
Posted: 7/11/2005 3:33:03 PM EDT
[#16]
Not available yet. C4 |
|
|
|
|
Posted: 7/11/2005 3:33:52 PM EDT
[#17]
Around 1oz C4 |
|
|
|
|
Posted: 7/12/2005 4:48:18 AM EDT
[#18]
Do you think Vltor would make the classic series if there was enough interest? |
||
|
|
|
Posted: 7/12/2005 5:29:43 AM EDT
[#19]
I think they are working on it, but no release dates yet. C4 |
|||
|
|
|
Posted: 7/12/2005 2:01:38 PM EDT
[#20]
Nice mount!!! Will this mount work with the M3-CB Surefire???
|
|
|
|
Posted: 7/12/2005 2:33:29 PM EDT
[#21]
O.K., I can never keep this straight- Does the E2D have/need a shock isolated bezel and if so/not, what do I need to convert it to a weaponlight? Thanks, dg
|
|
|
|
Posted: 7/12/2005 3:04:02 PM EDT
[#22]
No. C4 |
|
|
|
|
Posted: 7/12/2005 3:04:33 PM EDT
[#23]
No as they don't make a DEDICATED one for it. C4 |
|
|
|
|
Posted: 7/12/2005 3:35:15 PM EDT
[#24]
You can add the LU60A which is a step-up adapter with the P60 lamp & M2 shock isolated bezel -  Rather than using the M2 bezel I prefer using the slimmer & lighter Z32 if you're staying with the P60 lamp. |
|
|
|
|
Posted: 7/27/2005 10:43:02 PM EDT
[#25]
Is the problems with the old mount (ie rail to wide, couldn't get grip on light or if rail too small would grip light and not rail) fixed? Did they do away with the set screw? Thx.
|
|
|
|
Posted: 7/28/2005 3:31:34 AM EDT
[#26]
The issue is that the diameter of the classic series lights vary. The VLTOR mount requires that it be an exact size. C4 |
|
|
|
|
Posted: 7/28/2005 6:16:16 AM EDT
[#27]
just got my new one last week as a replacement from the 1st run. The new model does NOT have the set screw from the prototypes. New model works great. big improvement
|
|
|
|
Posted: 7/28/2005 6:36:20 AM EDT
[#28]
Ahh, yes they sure do, I can see that now that you mention it. All makes sense now. But does this mean the new one is also sensitive to this? |
||
|
|
|
Posted: 7/28/2005 6:54:35 AM EDT
[#29]
They have figured out a way to not make this an issue any more. C4 |
|||
|
|
|
Posted: 8/3/2005 3:39:41 PM EDT
[#30]
Will one of these work with a Pentagon X2?
|
|
|
|
Posted: 8/3/2005 5:13:54 PM EDT
[#31]
No. C4 |
|
|
|
|
Posted: 8/3/2005 7:33:33 PM EDT
[#32]
The ETA on the VLTOR mounts for the SF Classics & PentagonLights is approx. 3 weeks. If you can't hold out just use a basic 1" scope ring for the short term. |
|
|
|
|
Posted: 8/3/2005 7:37:12 PM EDT
[#33]
|
|
|
|
Posted: 11/6/2005 4:42:51 PM EDT
[#34]
Tag.
|
|
|
|
Posted: 11/7/2005 9:53:56 AM EDT
[#35]
Tag.
|
|
|
|
Posted: 11/10/2005 12:51:24 PM EDT
[#36]
Picked one up for my new style 6P. Does anyone know if the 6P is shock isolated? I think it is, and has survived several drops, but wanted to make sure. Do any of the strike bezels fit the 6P? Where & how much? Think one would match my 5C2 pretty nicely.
|
|
|
|
Posted: 11/10/2005 1:17:06 PM EDT
[#37]
It is 100% NOT shock isolated. I would suggest getting a SF Z32 Shock Isolated Bezel for it. C4 www.GRTactical.com |
|
|
|
|
Posted: 11/17/2005 1:35:19 PM EDT
[#38]
WHich mount works with the Pelican M6?
|
|
|
|
Posted: 11/17/2005 1:48:14 PM EDT
[#39]
WHich mount works with the Pelican M6? OOPS, Such a good question I posted twice
|
|
|
|
Posted: 11/17/2005 6:34:40 PM EDT
[#40]
Vltor - CK is the one you'll need. |
|
|
|
|
Posted: 11/18/2005 4:05:35 PM EDT
[#41]
CK with 6P is holding up well...
(thanks Calvin!) I really like being able to remove the light and throw in the my pocket or pack without needing tools. I just make sure the flats of the 6P body are facing vertical...I get concerned if the rifle falls over onto the mount, the space in between might cause the ring to deform. Just bein' cautious! my .02
|
|
|
|
Posted: 11/28/2005 3:02:02 PM EDT
[#42]
yes it does, I have my M3 on the G2 mount. You just have to mount it on the rubber part of the light 
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
