User Panel
User Panel
User Panel
|
Posted: 2/22/2007 5:44:55 AM EDT
[#1]
This investment wasn't cheap. but I figure the ongoing low cost of ammo will save me money in the long run.
This is a RRA lower registered as a SBR with a KKF upper that has a 5" 1/16 twist barrel under a generic FF handguard. The barrel is threaded 1/2 x 28. In this pic, I have a 9mm 3-lug suppressor attached utilizing a TROS 3-lug adapter. I now have a Tactical Innovations Tac-16 on her, but when I took the picture, the new can was still pending transfer. The other suppressor is there to give you a feel for barrel length with the 3-lug adapter. Costs: RRA lower, complete with CAR stock $180 SBR tax stamp and cost of engraving $235 KKF dedicated .22 upper plus Ceiner kit with 3x30rd mags $725 Tac-16 $350 Suppressor tax stamp $200 New old stock Aimpoint Comp M $310 Total cost $2,000, but it is whisper quiet, reliable, accurate and FUN as hell! 
|
|
|
|
Posted: 2/22/2007 6:52:21 AM EDT
[#2]
Dedicated .22lr upper:
 |
|
|
|
Posted: 2/22/2007 11:25:11 AM EDT
[#3]
Here's mine. Lower is a DPMS dedicated upper. Upper one is my semi-retro clone, which usually has a M261 .22 conversion in it but just happens to have an old-school chrome bolt in it in this pic.
|
|
|
|
Posted: 2/22/2007 7:33:27 PM EDT
[#4]
|
|
|
|
Posted: 2/23/2007 9:02:40 AM EDT
[#5]
 
|
|
|
|
Posted: 2/23/2007 9:12:37 AM EDT
[#6]
Are we limiting ourselves to .22LR ARs?
Woody |
|
|
|
Posted: 2/23/2007 10:51:16 AM EDT
[#7]
Yes. That's what this forum is about. There is another forum in the Arms & Tactics section for all other .22s. |
|
|
|
|
Posted: 2/23/2007 3:39:22 PM EDT
[#8]
All firearms in pic are set up to shoot .22s.
Dan 
|
|
|
|
Posted: 2/23/2007 4:39:09 PM EDT
[#9]
Gotta love that Kadet!
|
|
|
|
Posted: 2/23/2007 4:51:35 PM EDT
[#10]
Here's my 2 favorite 22's
 |
|
|
|
Posted: 2/24/2007 7:21:38 PM EDT
[#11]
There are some sweet 22 setups. Please keep them coming.
|
|
|
|
Posted: 2/25/2007 8:07:14 AM EDT
[#12]
|
|
|
|
Posted: 2/25/2007 9:47:46 AM EDT
[#13]
Nice vid. What 22 upper/conversion did you use? Also, where did you get the mags at?
|
|
|
|
Posted: 2/25/2007 11:47:58 AM EDT
[#14]
It's a start -- but not finished yet..
 
|
|
|
|
Posted: 2/27/2007 7:47:47 AM EDT
[#15]
|
|
|
|
Posted: 3/2/2007 7:33:46 PM EDT
[#16]
what upper is that? some sort of belt fed, but who makes it?
|
|
|
|
Posted: 3/2/2007 7:49:35 PM EDT
[#17]
Lakeside LM7 |
|
|
|
|
Posted: 3/7/2007 4:08:59 AM EDT
[#19]
what did you pay for the lm7 upper?
thanks |
|
|
|
Posted: 3/15/2007 2:36:35 PM EDT
[#20]
Kuehl upper on dedicated Superior Arms lower
|
|
|
|
Posted: 3/15/2007 5:28:55 PM EDT
[#21]
|
|
|
|
Posted: 3/15/2007 8:39:55 PM EDT
[#22]
WoW M4-TUNA Thats a killer mouse gun you got there.
|
|
|
|
Posted: 3/19/2007 5:21:21 PM EDT
[#23]
all of these photos are giving me some good ideas.
|
|
|
|
Posted: 3/21/2007 7:26:06 PM EDT
[#24]
|
|
|
|
Posted: 3/22/2007 12:58:36 AM EDT
[#25]
|
|
|
|
Posted: 3/22/2007 10:53:33 AM EDT
[#26]
Here's one that I like.....Nothing better than suppressed Auto 22lr!
  And the required suppressed p-22 AKA the NFA gateway drug 
|
|
|
|
Posted: 3/22/2007 1:49:51 PM EDT
[#27]
very nice! what can is that? |
|
|
|
|
Posted: 3/23/2007 6:12:35 PM EDT
[#28]
Is there a such thing as cheap decent capactiy mags for a .22 AR system? It is one of the reasons I haven't got one yet. Any ideas? 60-70 dollar mags don't do anything for me.
|
|
|
|
Posted: 3/23/2007 6:49:57 PM EDT
[#29]
 try kuehl precision firearms |
|
|
|
|
Posted: 3/25/2007 11:57:54 AM EDT
[#30]
|
|
|
|
Posted: 3/25/2007 5:39:23 PM EDT
[#31]
 Spike's upper CMMG lower AAC .223 Ranger suppressor pile o' Blackdog mags 
|
|
|
|
Posted: 3/25/2007 7:37:42 PM EDT
[#32]
hey sunnybean, how you liking your spike upper, i just custom built my upper at the shop today after the gun show.
and do i count 18 blackdog mags? that must of been a nice chunk of change for those |
|
|
|
Posted: 3/25/2007 8:21:35 PM EDT
[#33]
Loving it 17 total...purchased 15 and Kevin at Blackdog threw in 2 for free. Had it at the range today and worked flawlessly. Load a mag and blow out a 10 ring (25yrds). Lots of fun. Enjoy yours.
|
|
|
|
|
Posted: 3/25/2007 8:42:08 PM EDT
[#34]
 .22 LR Spikes Tactical Upper , 12" YHM rail and YHM end, A2 birdcage waiting on TacSol Supressor, Spikes Tactical LEO/Govt lower, Stag M4 Stock and buffer |
|
|
|
Posted: 3/26/2007 11:27:13 AM EDT
[#35]
http://img.photobucket.com/albums/v94/Walnutt/ar22.jpg
Ciener kit YHM Specter kit (12") YHM Phantom Magpul MIAD Magpul CTR Replica Aimpoint Planning on buying a suppressor and some BDM mags when I get the time. |
|
|
|
Posted: 3/31/2007 9:41:33 AM EDT
[#36]
spikes has some neat stuff, I am going to have to check them out.
|
|
|
|
Posted: 4/5/2007 8:21:26 PM EDT
[#37]
Any pics with the m261 conversion kits?
|
|
|
|
Posted: 4/6/2007 11:08:13 AM EDT
[#38]
|
|
|
|
Posted: 4/6/2007 1:28:00 PM EDT
[#39]
OLY/SGW RR M16 converted lower with an 8" 22lr barrel from Kurts Kustom Firearms. Ceiner F/A kit, El Cheapo quadrail handguards, LMT front sight and DPMS rear. M42000 suppressor. Pic with CTR stock I added a while back: 
|
||
|
|
|
Posted: 4/6/2007 2:58:18 PM EDT
[#40]
|
|
|
|
Posted: 4/6/2007 5:05:16 PM EDT
[#41]
|
|||
|
|
|
Posted: 4/6/2007 6:42:58 PM EDT
[#42]
For anyone that uses a suppressor on a 16" .22LR upper, what ammo (if any) do you run that stays subsonic? The kits I've looked at all give recommendations on what type of ammo to use, and they never list subsonic. Do standard velocity rounds, like CCI, stay subsonic out of a 16" barrel? I'm specifically looking at buying a Kuehl upper with a Ceiner kit. Thanks.
|
|
|
|
Posted: 4/7/2007 5:25:55 AM EDT
[#43]
Its not an OLY upper, just an OLY lower. That upper is CMT. One of the big problems with FA lowers made 20-something years ago is they can often be slightly out of spec. Mine isnt bad, but some uppers fit really tight. |
||||
|
|
|
Posted: 4/8/2007 9:03:54 PM EDT
[#44]
Gorilla what stock is that and can you post a link on where to get them? Thanks 9's |
|
|
|
|
Posted: 4/10/2007 10:16:48 AM EDT
[#45]
Maybe a dumb question, but where is the sear pin hole in your auto 22?
|
|
|
|
Posted: 4/10/2007 11:05:08 AM EDT
[#46]
If you are asking that about Davidp14's shooter, then yes it has a sear pin. It is a m16 conversion on a PWA (?) receiver. |
|
|
|
|
Posted: 4/10/2007 11:37:43 AM EDT
[#47]
School me on conversions or have linky. I didn't notice he was an Industry Partner until I already posted.
Scratch schoolin me. Found what I need under the M-16 forums. Wow, You really can find what you need if you look.
|
|
|
|
Posted: 4/11/2007 7:13:34 AM EDT
[#48]
user426, what are you using for the stock plug? |
|
|
|
|
Posted: 4/11/2007 1:02:06 PM EDT
[#49]
Tagged for inspiration.
|
|
|
|
Posted: 4/11/2007 7:38:00 PM EDT
[#50]
where can i find some of thes blackdog mags pictured?
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
