User Panel
User Panel
User Panel
|
Posted: 10/28/2004 8:46:49 AM EDT
[Last Edit: Orion10182011]
Here is mine! Colt 9mm AR-15.
|
|
|
|
|
Posted: 2/5/2015 11:31:37 PM EDT
[#1]
Quote HistoryOriginally Posted By RussellAthletic:
Nice score on the DD rail. Those are hard to find these days. What buffer/spring combo you running? Let us know how she runs. Quote HistoryOriginally Posted By RussellAthletic:
Originally Posted By Riley1980:
Finished a QC10 small frame lower build. http://i172.photobucket.com/albums/w22/hooligan882007/Mobile%20Uploads/2015-01-31%2020.58.46_zps3tujrtbp.jpg http://i172.photobucket.com/albums/w22/hooligan882007/Mobile%20Uploads/2015-01-31%2020.59.04_zpsfqhqguhs.jpg No time to choot it till monday. Nice score on the DD rail. Those are hard to find these days. What buffer/spring combo you running? Let us know how she runs. Thanks. went with the jp silent capture spring and jp bolt. That rail was a pain in the ass to find. I looked everywhere, then one day I posted in the looking to buy forum of the EE. A member emailed me like ten minutes later.. said he had one new no box for 100$!! I jumped all over it. 
|
|
|
|
TN, USA
|
Posted: 2/19/2015 3:18:42 PM EDT
[#3]
Got mine finished. Tactical Ambush 10.5" Barrel and NiB Bolt, UTG Slim Pro 9" HG, Delware Ind. Lower, New Frontier slick side billet upper, RRA 9mm buffer and spring, Spikes mag block, Spikes buffer spacer, & Ebay FH
Had to tweak the mag lips on the ACS mags. The right side of the mag lips were too tall and the rim extended too far into the mag body for my setup. After filing them down, they all worked great. Looking at the Metalform mags, I don't think they would have that issue on this build. Ran a bunch of rounds through it today and all I can say is WOW! What a fun gun. Picked up a See All sight and it works great for this gun. I had used one in the past on a shotgun and liked the idea, and for this gun it was a great fit. I could do without the banner on the side, but it's a small issue. Very tame recoil, accurate, light, fun, and it's a pistol. BTW - the Sig brace was very comfortable on my arm ;) 
|
|
|
|
Posted: 2/19/2015 9:55:16 PM EDT
[#4]
This is way to much fun to shoot. |
|
|
|
|
Posted: 2/23/2015 12:58:45 AM EDT
[#5]
|
|
|
|
AL, USA
|
Posted: 2/25/2015 6:22:49 PM EDT
[#6]
Finally I can post in this thread
 " />
TROS 9" three lug barrel Fortis REV 7" VLTOR upper CMMG ramped bolt (Glock cut by ADCO) EOTech XPS DDLES lower PSA LPK Battlelink Minimalist Stock |
|
|
FL, USA
|
Posted: 2/25/2015 7:18:51 PM EDT
[Last Edit: hellraiza]
[#7]
Gibbz Side-Charging-Upper JBO Spartan Billet Lower PSA mag block BAD safety Heavy 9mm buffer 7" Wilson Arms barrel ebay flash hider ebay steel flip up sights YHM Specter Length Free Float Geissele B-GRF Trigger Thordsen Buffer Tube Cover with cheek rest Waiting on the Form 1 to clear to put in the order for the MVB ARC Stock, and then i'll start the can process 
|
|
|
|
Posted: 3/11/2015 3:00:11 AM EDT
[#8]
Mine's still a work in progress.
Version 1 
Version 2 
I'm waiting on my flash can to arrive and I'm contemplating purchasing a 5.5" rail. I'll post pics when done. |
|
|
|
IA, USA
|
Posted: 3/12/2015 5:17:02 PM EDT
[Last Edit: ausher1880]
[#9]
Almost done. Just need to cut the bolt for glock magazines
|
|
|
TX, USA
|
Posted: 3/12/2015 10:47:47 PM EDT
[Last Edit: Silverbiturbos4]
[#10]
I finally get to contribute to this thread. This is how she sits now until I get my stamp in.
Yes I know the safety is off and there is a mag in But there is no ammo in the mag or chamber. 
|
|
|
NV, USA
|
Posted: 3/13/2015 6:41:13 PM EDT
[#11]
I haven't posted pix of my build in a quite a while, so some of these might be duplicates.
This is my 9mm SBR build. It's based on a Glock-compatible DDLES lower and uses a VLTOR MUR upper. The rail is by Troy (love them squid grips!) The stock is a mission first "minimalist" stock. The barrel started life as a 10" barrel, but was custom shortened so that the AAC suppressor would be just millimeters away from the handguard. I have a 100-round Beta drum. It's ridiculous and it's heavy - but it scares the hippies and makes the MILF's at Moms Demand Action cry and that makes me happy. 
|
|
|
|
Posted: 3/13/2015 7:27:27 PM EDT
[#12]
Who makes that drum mag, and how well does it run?
|
|
|
|
NV, USA
|
Posted: 3/13/2015 8:23:28 PM EDT
[#13]
Quote HistoryOriginally Posted By BlackRifleJuju:
Who makes that drum mag, and how well does it run? It's an original Beta Company magazine. It runs just fine. It's just heavy and unwieldy. It's far more for show than anything |
|
|
|
Posted: 3/13/2015 8:41:17 PM EDT
[#14]
Given the choice between ammunition capacity, and maneuverability, I will almost always chose capacity.
|
|
|
|
USA
|
Posted: 3/15/2015 10:58:37 PM EDT
[#15]
Still waiting for the F1 to clear on the Glock Lower...so for now the upper sits on a Colt Lower:
|
|
|
|
Posted: 3/16/2015 6:02:01 AM EDT
[#16]
Beauty! (I'm biased... Mine looks similar)
|
|
|
|
|
Posted: 3/16/2015 2:03:31 PM EDT
[#17]
Hey, seattlite, what handguard/handstop are you running? Thanks.
|
|
|
|
USA
|
Posted: 3/16/2015 4:24:22 PM EDT
[#18]
Quote HistoryOriginally Posted By gibsonsg05:
Hey, seattlite, what handguard/handstop are you running? Thanks. Odin Works 5.5 KeyMod. Picture is with a 5" barrel and a 3-lug adapter and with 3-lug flash hider and cans. I tried a DD Lite 4.0 and a Samson Star 4, but because of the 5" barrel I didn't really save on OAL and I like the extra space with the 5.5" rail. |
|
|
|
Posted: 3/16/2015 5:59:48 PM EDT
[#19]
Gotcha. I thought that was the Odin Works. I was looking at that as well for mine but ended up going with a 4" keymod rail. I have a 5.25" barrel on mine. I also got a 7" keymod rail that uses the same barrel nut so I can swap them out if I wanted. That 5.5" looks good though.
|
|
|
|
USA
|
Posted: 3/16/2015 8:23:10 PM EDT
[#20]
Quote HistoryOriginally Posted By gibsonsg05:
Gotcha. I thought that was the Odin Works. I was looking at that as well for mine but ended up going with a 4" keymod rail. I have a 5.25" barrel on mine. I also got a 7" keymod rail that uses the same barrel nut so I can swap them out if I wanted. That 5.5" looks good though. Which 4" keymod rail did you get? |
|
|
|
Posted: 3/16/2015 9:38:33 PM EDT
[Last Edit: gibsonsg05]
[#21]
Both the keymod rails I got were by MAS Defense. They just arrived today. I'll post some pics tomorrow after I install em. I haven't seen any pics of them any any other rifles yet, but I have some of their other products and I haven't had any issues.
|
|
|
|
|
Posted: 3/17/2015 7:51:20 AM EDT
[#22]
Technicality: 40 not 9mm |
|
|
|
|
Posted: 3/17/2015 8:45:15 AM EDT
[#23]
Questions for you, Mr. Loud, on your Form-1 did you have to specify .4 Cal? I assume you will run multiple caliber uppers with that lower, no? What caliber did you end up engraving on your lower? I'm thinking about running a different caliber upper on my 9mm SBR, but my lower is registered for 9mm, and engraved 9x19 mm. Not sure the NFA legalities are here.
|
|
|
|
|
Posted: 3/17/2015 9:23:31 AM EDT
[#24]
Haha. Please, call me Go.
My understanding is that as long as you engrave the caliber as shown on your approved form 1, you can change callibers as many times as you wish after you build the initial approved configuration. 
Quote HistoryOriginally Posted By Linc5870:
Questions for you, Mr. Loud, on your Form-1 did you have to specify .4 Cal? I assume you will run multiple caliber uppers with that lower, no? What caliber did you end up engraving on your lower? I'm thinking about running a different caliber upper on my 9mm SBR, but my lower is registered for 9mm, and engraved 9x19 mm. Not sure the NFA legalities are here. |
|
|
|
|
Posted: 3/17/2015 9:52:25 AM EDT
[#25]
OK, Go, thanks. I might be crazy here, but I have a QC10 CLT9MM lower, bulit out as a 9mm SBR. I was looking at the hype of the Amscor .22 TCM 9R cartridge and I'm intrigued. Was thinking about building an upper with a .22 cal barrel to accommodate that round. Looks like muzzle energy is similar to a hot 9mm round, so I expect that the buffer and spring I use now will be fine. Might need a new BCG because I think the case of the round is a .38 Super necked down. Since my lower is a dedicated 9mm, this would allow me to reuse a lot, and be able to send a 40 grain bullet down range at 2000 fps (if you believe the hype). I just didn't know if this was legal for me to do based on NFA rules.
Or maybe I just build a standard .223 rifle. Probably would end up being cheaper going that route. I dunno... I'm always up for a challenge, except my wallet is not 
|
|
|
|
|
Posted: 3/17/2015 10:13:56 AM EDT
[#26]
Quote HistoryOriginally Posted By Linc5870:
OK, Go, thanks. I might be crazy here, but I have a QC10 CLT9MM lower, bulit out as a 9mm SBR. I was looking at the hype of the Amscor .22 TCM 9R cartridge and I'm intrigued. Was thinking about building an upper with a .22 cal barrel to accommodate that round. Looks like muzzle energy is similar to a hot 9mm round, so I expect that the buffer and spring I use now will be fine. Might need a new BCG because I think the case of the round is a .38 Super necked down. Since my lower is a dedicated 9mm, this would allow me to reuse a lot, and be able to send a 40 grain bullet down range at 2000 fps (if you believe the hype). I just didn't know if this was legal for me to do based on NFA rules. Or maybe I just build a standard .223 rifle. Probably would end up being cheaper going that route. I dunno... I'm always up for a challenge, except my wallet is not You are above my knowledge, skills and abilities. Sounds like fun, though. Start a build thread and slowly work it up. I too am limited by funds for all the projects I'd like to do. |
|
|
|
|
Posted: 3/17/2015 3:52:35 PM EDT
[Last Edit: gibsonsg05]
[#27]
I got my Mas Defense keypad rails installed.
Here's with the 4" 
Here's with the 7" 
I thinking that I'm liking the 4" more because it gives it more of an SMG look. I also added a RRA buffer and cut down one of their stock spacers and added a .4" spacer in the buffer tube behind the spring. As far as the MAS Defense rails, I'll say that they're "ok" but I probably wouldn't run one on a full size rifle. It seems like the steel they use for the barrel nut is a bit softer than I'd like, and the flats are not large enough to get the correct size crescent wrench on em. I was able to tighten it to 40ft/lbs using the castle nut wrench on my AR tool (which indexed the screw holes perfectly). The screws are EASY to strip so hand tightening is about as good as it gets. But for the price I say it's acceptable. I've got some MI keymod rail covers on the way, other than that I'll probably just add some HK sights and be done. |
|
|
|
KS, USA
|
Posted: 3/17/2015 4:17:22 PM EDT
[#28]
Quote HistoryOriginally Posted By Linc5870:
OK, Go, thanks. I might be crazy here, but I have a QC10 CLT9MM lower, bulit out as a 9mm SBR. I was looking at the hype of the Amscor .22 TCM 9R cartridge and I'm intrigued. Was thinking about building an upper with a .22 cal barrel to accommodate that round. Looks like muzzle energy is similar to a hot 9mm round, so I expect that the buffer and spring I use now will be fine. Might need a new BCG because I think the case of the round is a .38 Super necked down. Since my lower is a dedicated 9mm, this would allow me to reuse a lot, and be able to send a 40 grain bullet down range at 2000 fps (if you believe the hype). I just didn't know if this was legal for me to do based on NFA rules. Or maybe I just build a standard .223 rifle. Probably would end up being cheaper going that route. I dunno... I'm always up for a challenge, except my wallet is not I was looking into this very subject just the other week. I have a QC10 GSF lower as well and after seeing the 22tcm glock conversions debuted at shot show I figured that the next logical step would be an upper for my QC10 sbr. From what I understand the cartridge is not saami spec and the only reamer available so far is proprietary and not sold to the public. I can't wait for that to change because the round could truly find it's place in my arsenal as a true 5.7 replacement once short threaded barrels are available for AR's. |
|
|
|
Posted: 3/20/2015 1:52:52 PM EDT
[#29]
Well I just got my pistol together and functioning. Thanks to anyone who helped in my thread about functional issues. REALLY like this thing. Need the can(s) to come in.
CMMG lower with 4" barrel from Tactical Ambush. Geissele GS2 trigger, SBX brace (form 1 pending), I put the cheap-o M2000 RDS on it for now. Will switch out with a PA Micro soon. 
Here is a pic of the Tactical Ambush ramped bolt. Looks great. 
|
|
|
|
|
Posted: 3/20/2015 10:01:12 PM EDT
[#30]
Yeh that ramped bolt looks smooth.
|
|
|
|
NC, USA
|
Posted: 3/21/2015 4:42:00 PM EDT
[#31]
Quote HistoryOriginally Posted By Linc5870:
OK, Go, thanks. I might be crazy here, but I have a QC10 CLT9MM lower, bulit out as a 9mm SBR. I was looking at the hype of the Amscor .22 TCM 9R cartridge and I'm intrigued. Was thinking about building an upper with a .22 cal barrel to accommodate that round. Looks like muzzle energy is similar to a hot 9mm round, so I expect that the buffer and spring I use now will be fine. Might need a new BCG because I think the case of the round is a .38 Super necked down. Since my lower is a dedicated 9mm, this would allow me to reuse a lot, and be able to send a 40 grain bullet down range at 2000 fps (if you believe the hype). I just didn't know if this was legal for me to do based on NFA rules. Or maybe I just build a standard .223 rifle. Probably would end up being cheaper going that route. I dunno... I'm always up for a challenge, except my wallet is not I have 2 of the RIA 22 TCM's and 2000 fps out of a 5" barrel is real. They feed from a 9mm mag in the pistols but what do on the bolt and chamber will take some machine work I expect. It would be a interesting project but don't expect off the shelf parts. The brass can be made from .223. Probably need a custom chamber barrel and bolt.. |
|
|
|
Posted: 3/21/2015 4:55:49 PM EDT
[#32]
Quote HistoryOriginally Posted By 9mmar15:
I have 2 of the RIA 22 TCM's and 2000 fps out of a 5" barrel is real. They feed from a 9mm mag in the pistols but what do on the bolt and chamber will take some machine work I expect. It would be a interesting project but don't expect off the shelf parts. The brass can be made from .223. Probably need a custom chamber barrel and bolt.. We should probably take this to a separate thread, but I agree with you on custom bolt, chamber and barrel. Doing some research, but not seriously until the 9R round becomes available. Maybe ADCO could fabricate something (except I have empty wallet ). I want to re-use my QC10 9mm Colt Lower and Metalform mags. Good to know you get 2000 out of 5".
|
|
|
|
|
Posted: 3/21/2015 7:04:46 PM EDT
[#33]
|
|
|
|
PA, USA
|
Posted: 3/22/2015 3:32:48 AM EDT
[Last Edit: shadohh]
[#34]
Quote HistoryOriginally Posted By pukindog:
http://i1212.photobucket.com/albums/cc457/pukindog1/various/SPIKES-032115_zpsuseq3zzs.jpg Is that an A1 stock or RRA entry? |
|
|
|
Posted: 3/22/2015 9:34:11 AM EDT
[Last Edit: pukindog]
[#35]
Quote HistoryOriginally Posted By shadohh:
Is that an A1 stock or RRA entry? Quote HistoryOriginally Posted By shadohh:
Originally Posted By pukindog:
http://i1212.photobucket.com/albums/cc457/pukindog1/various/SPIKES-032115_zpsuseq3zzs.jpg Is that an A1 stock or RRA entry? Model 1 LE Tactical. It's 7.25". The A1 is longer, about 5/8" shorter than the A2. |
|
|
|
LA, USA
|
Posted: 3/23/2015 3:54:14 PM EDT
[#36]
you need more mags. lol
|
|
|
|
Posted: 3/23/2015 4:58:44 PM EDT
[Last Edit: gibsonsg05]
[#37]
Finally got my new HK style irons. I think I'm done. I may switch out the upper if I find a killer deal during the holidays.
Upper -Mas Defense upper receiver -Quarter Circle 10 5.25" barrel -Mas Defense slim flash can -Mas Defense 4" keymod handguard -Midwest Industries keymod panels -HK416 iron sights -ADCO forward assist plug Lower -Quarter Circle 10 lower receiver -Anderson MGF LPK -Troy battle axe pistol grip -PSA pistol buffer tube -RRA 9mm buffer -RRA buffer spacer (cut-down) -Brownells carbine length spring 
|
|
|
|
TX, USA
|
Posted: 3/24/2015 8:49:48 AM EDT
[#38]
|
|
|
|
Posted: 3/25/2015 10:52:21 PM EDT
[Last Edit: Hands]
[#39]
Anderson receivers with cmmg bolt, Adco barrel, and AAC Evo-9. Have since H3 buffer and KNS non rotating pins. |
|
|
|
AR, USA
|
Posted: 3/26/2015 12:00:42 AM EDT
[#40]
Quote HistoryOriginally Posted By gibsonsg05:
Finally got my new HK style irons. I think I'm done. I may switch out the upper if I find a killer deal during the holidays. Upper -Mas Defense upper receiver -Quarter Circle 10 5.25" barrel -Mas Defense slim flash can -Mas Defense 4" keymod handguard -Midwest Industries keymod panels -HK416 iron sights -ADCO forward assist plug Lower -Quarter Circle 10 lower receiver -Anderson MGF LPK -Troy battle axe pistol grip -PSA pistol buffer tube -RRA 9mm buffer -RRA buffer spacer (cut-down) -Brownells carbine length spring http://img.photobucket.com/albums/v639/gibsonsg0005/9mm%20pistol%20fail/IMG_3987.jpg http://img.photobucket.com/albums/v639/gibsonsg0005/9mm%20pistol%20fail/IMG_3986.jpg How did you get the MAS defense upper to fit your QC10 lower? I had the same setup picked out, but couldn't get them to match. |
|
|
|
Posted: 3/26/2015 12:49:46 AM EDT
[#41]
Quote HistoryOriginally Posted By cyan1de23:
How did you get the MAS defense upper to fit your QC10 lower? I had the same setup picked out, but couldn't get them to match. Quote HistoryOriginally Posted By cyan1de23:
Originally Posted By gibsonsg05:
Finally got my new HK style irons. I think I'm done. I may switch out the upper if I find a killer deal during the holidays. Upper -Mas Defense upper receiver -Quarter Circle 10 5.25" barrel -Mas Defense slim flash can -Mas Defense 4" keymod handguard -Midwest Industries keymod panels -HK416 iron sights -ADCO forward assist plug Lower -Quarter Circle 10 lower receiver -Anderson MGF LPK -Troy battle axe pistol grip -PSA pistol buffer tube -RRA 9mm buffer -RRA buffer spacer (cut-down) -Brownells carbine length spring http://img.photobucket.com/albums/v639/gibsonsg0005/9mm%20pistol%20fail/IMG_3987.jpg http://img.photobucket.com/albums/v639/gibsonsg0005/9mm%20pistol%20fail/IMG_3986.jpg How did you get the MAS defense upper to fit your QC10 lower? I had the same setup picked out, but couldn't get them to match. They fit without issue. One may be out of spec. If you have another AR I would see how the upper and lower fit with those. If ones out of spec contact the conpany and hopefully they'll help u out. |
|
|
|
AR, USA
|
Posted: 3/26/2015 9:36:31 AM EDT
[#42]
Quote HistoryOriginally Posted By gibsonsg05:
They fit without issue. One may be out of spec. If you have another AR I would see how the upper and lower fit with those. If ones out of spec contact the conpany and hopefully they'll help u out. Quote HistoryOriginally Posted By gibsonsg05:
Originally Posted By cyan1de23:
Originally Posted By gibsonsg05:
Finally got my new HK style irons. I think I'm done. I may switch out the upper if I find a killer deal during the holidays. Upper -Mas Defense upper receiver -Quarter Circle 10 5.25" barrel -Mas Defense slim flash can -Mas Defense 4" keymod handguard -Midwest Industries keymod panels -HK416 iron sights -ADCO forward assist plug Lower -Quarter Circle 10 lower receiver -Anderson MGF LPK -Troy battle axe pistol grip -PSA pistol buffer tube -RRA 9mm buffer -RRA buffer spacer (cut-down) -Brownells carbine length spring http://img.photobucket.com/albums/v639/gibsonsg0005/9mm%20pistol%20fail/IMG_3987.jpg http://img.photobucket.com/albums/v639/gibsonsg0005/9mm%20pistol%20fail/IMG_3986.jpg How did you get the MAS defense upper to fit your QC10 lower? I had the same setup picked out, but couldn't get them to match. They fit without issue. One may be out of spec. If you have another AR I would see how the upper and lower fit with those. If ones out of spec contact the conpany and hopefully they'll help u out. I've tried to fit it to several and it won't mate with any of my lowers. I emailed MAS Defense and they ignored me. I guess I could call. |
|
|
|
Posted: 3/26/2015 1:27:08 PM EDT
[#43]
I would get on them for sure. Email, call, facebook.
|
|
|
|
|
Posted: 3/26/2015 7:43:28 PM EDT
[#44]
Quote HistoryOriginally Posted By cyan1de23:
I've tried to fit it to several and it won't mate with any of my lowers. I emailed MAS Defense and they ignored me. I guess I could call. Quote HistoryOriginally Posted By cyan1de23:
Originally Posted By gibsonsg05:
Originally Posted By cyan1de23:
Originally Posted By gibsonsg05:
Finally got my new HK style irons. I think I'm done. I may switch out the upper if I find a killer deal during the holidays. Upper -Mas Defense upper receiver -Quarter Circle 10 5.25" barrel -Mas Defense slim flash can -Mas Defense 4" keymod handguard -Midwest Industries keymod panels -HK416 iron sights -ADCO forward assist plug Lower -Quarter Circle 10 lower receiver -Anderson MGF LPK -Troy battle axe pistol grip -PSA pistol buffer tube -RRA 9mm buffer -RRA buffer spacer (cut-down) -Brownells carbine length spring http://img.photobucket.com/albums/v639/gibsonsg0005/9mm%20pistol%20fail/IMG_3987.jpg http://img.photobucket.com/albums/v639/gibsonsg0005/9mm%20pistol%20fail/IMG_3986.jpg How did you get the MAS defense upper to fit your QC10 lower? I had the same setup picked out, but couldn't get them to match. They fit without issue. One may be out of spec. If you have another AR I would see how the upper and lower fit with those. If ones out of spec contact the conpany and hopefully they'll help u out. I've tried to fit it to several and it won't mate with any of my lowers. I emailed MAS Defense and they ignored me. I guess I could call. MAS D. Has terrible customer service. They don't do refunds, on credit minus 30 percent or something like that. They also require you to pay shipping both ways, and won't give credit until after they receive and inspect it. I had issues with my rail I got from them and they told me I was wrong and if there was an issue all I had to do was file it down myself.... Never buying from again. Also, I posted negative reviews on their products and they removed the reviews from the site over and over. 10/10 would avoid again. |
|
|
|
|
Posted: 3/26/2015 8:34:41 PM EDT
[Last Edit: Outrider]
[#45]
Finally picked up the Mystic X today along with some other goodies. Going to try out the KAC NVG high mount for the R1. I find that these small PDW weapons force me to get real low and hunched up for a nice sight picture. Having a higher mount gives a more comfortable "heads up" position. I've added a comparison picture with a LT 660. I'm looking forward to running it hard this weekend (and get some better pictures)!
    |
|
|
|
|
Posted: 3/27/2015 3:24:11 AM EDT
[#46]
Quote HistoryOriginally Posted By RussellAthletic:
<a href="http://s619.photobucket.com/user/RussellAthletic/media/R1_zpsd8phamwa.jpg.html" target="_blank">http://i619.photobucket.com/albums/tt275/RussellAthletic/R1_zpsd8phamwa.jpg</a> <a href="http://s619.photobucket.com/user/RussellAthletic/media/R2_zps0izssv8m.jpg.html" target="_blank">http://i619.photobucket.com/albums/tt275/RussellAthletic/R2_zps0izssv8m.jpg</a> <a href="http://s619.photobucket.com/user/RussellAthletic/media/R3_zpsbzbkefea.jpg.html" target="_blank">http://i619.photobucket.com/albums/tt275/RussellAthletic/R3_zpsbzbkefea.jpg</a> Quote HistoryOriginally Posted By RussellAthletic:
<a href="http://s619.photobucket.com/user/RussellAthletic/media/R1_zpsd8phamwa.jpg.html" target="_blank">http://i619.photobucket.com/albums/tt275/RussellAthletic/R1_zpsd8phamwa.jpg</a> <a href="http://s619.photobucket.com/user/RussellAthletic/media/R2_zps0izssv8m.jpg.html" target="_blank">http://i619.photobucket.com/albums/tt275/RussellAthletic/R2_zps0izssv8m.jpg</a> <a href="http://s619.photobucket.com/user/RussellAthletic/media/R3_zpsbzbkefea.jpg.html" target="_blank">http://i619.photobucket.com/albums/tt275/RussellAthletic/R3_zpsbzbkefea.jpg</a> Nice setup. Originally Posted By RussellAthletic:
<a href="http://s619.photobucket.com/user/RussellAthletic/media/Comp_zpseeejfh8x.jpg.html" target="_blank">http://i619.photobucket.com/albums/tt275/RussellAthletic/Comp_zpseeejfh8x.jpg</a> My eyes ! 
|
|
|
|
TN, USA
|
Posted: 3/27/2015 9:17:07 PM EDT
[Last Edit: midnight_at_dennys]
[#47]
I can finally join the club! :DDD
EDIT: Hmm, image shows up in preview but only shows link after submission. What's going on here? |
|
|
|
Posted: 3/27/2015 10:02:07 PM EDT
[#48]
Nice job!
Who makes the magazine coupler? If you post more, your images will show up without having to be approved. 
Quote HistoryOriginally Posted By midnight_at_dennys:
I can finally join the club! :DDD <a href="http://imgur.com/sCHhMEy" target="_blank">http://i.imgur.com/sCHhMEy.jpg</a> EDIT: Hmm, image shows up in preview but only shows link after submission. What's going on here? |
|
|
|
TN, USA
|
Posted: 3/27/2015 10:07:20 PM EDT
[#49]
Quote HistoryOriginally Posted By goloud:
Nice job! Who makes the magazine coupler? If you post more, your images will show up without having to be approved.
Quote HistoryOriginally Posted By goloud:
Nice job! Who makes the magazine coupler? If you post more, your images will show up without having to be approved.
Originally Posted By midnight_at_dennys:
I can finally join the club! :DDD <a href="http://imgur.com/sCHhMEy" target="_blank">http://i.imgur.com/sCHhMEy.jpg</a> EDIT: Hmm, image shows up in preview but only shows link after submission. What's going on here? Ahhhh, so it requires approval. Guess you'll be seeing me around more often. :P Mag coupler is by Hera Arms. I got it from LAN World but they don't seem to carry it anymore. |
|
|
|
Posted: 3/28/2015 2:25:57 PM EDT
[#50]
Quote HistoryOriginally Posted By wunder556:
broke down and put the LWRC stock and MPRO sights on it. <a href="http://s1153.photobucket.com/user/wunder556/media/2015-01-24%2012.19.33_zpsaqdk8wvb.jpg.html" target="_blank">http://i1153.photobucket.com/albums/p502/wunder556/2015-01-24%2012.19.33_zpsaqdk8wvb.jpg</a> <a href="http://s1153.photobucket.com/user/wunder556/media/2015-01-24%2012.20.17_zpsp2yvhiux.jpg.html" target="_blank">http://i1153.photobucket.com/albums/p502/wunder556/2015-01-24%2012.20.17_zpsp2yvhiux.jpg</a> What buffer are you using? |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
