User Panel
User Panel
User Panel
|
Posted: 11/13/2007 12:08:36 AM EDT
[Last Edit: SMTM]
Well...why not
 
|
|
|
|
|
Posted: 3/28/2013 5:21:31 AM EDT
[Last Edit: Zerlak]
[#1]
My first AR15 that I built from the ground up. Decided to try out the Bison Armory subsonic 1:7 twist platform. Just need to get a re-load press so I can start shooting the 200 grain subsonic 6.8 rounds and hopefully the future 220 grain, if Ben is able to get the design rolling. AAC SDN-6 tax stamp sent out as well
 " />
 " />
 " />
|
|
|
|
|
Posted: 5/22/2013 6:19:07 PM EDT
[Last Edit: TheMechanic48]
[#2]
Just finished it up today. Will shoot it next week when I'm off and get it sighted in.
|
|
|
|
|
Posted: 6/10/2013 7:33:38 PM EDT
[Last Edit: TheMechanic48]
[#3]
A little update. I swapped out the Noveske NSR 11inch rail with a Noveske 15in NSR rail today.
Got it sighted in last week and shoots great. 
|
|
|
|
|
Posted: 6/11/2013 8:55:23 PM EDT
[#4]
Here's one of my 6.8's-
|
|
|
|
|
Posted: 6/16/2013 12:00:04 PM EDT
[#5]
Seekins Precision Billet upper & lower Seekins Precision Advanced Tactical Compensator Seekins Precision Adjustable Gas Block Rainier Arms Ultra Match 18" Rainier Arms Raptor Young Manufacturing NM BCG Midwest Industries SS 12" Timney 3lbs. trigger Battle Arms BAD-ASS Dual-Standard KNS Anti-Walk American Defense Recon Vortex Viper PST 6-24x50 Vortex Bubble Magpul PRS |
|
|
|
|
Posted: 7/5/2013 6:39:11 PM EDT
[#6]
ARP "16 scout
MI 12" rail  |
|
|
|
FL, USA
|
Posted: 7/7/2013 7:02:43 PM EDT
[#7]
almost there |
|
|
PA, USA
|
Posted: 7/8/2013 7:40:07 PM EDT
[#8]
Originally Posted By RCC1:
Here's one of my 6.8's- http://i300.photobucket.com/albums/nn38/rccox/Guns/Tungsten%2068/6cddb0b0716c8ff69e217bc954765b3c.jpg http://i300.photobucket.com/albums/nn38/rccox/Guns/Tungsten%2068/0c4fdf7da36402a1ed332fa8fae0e0ef.jpg Specs? |
|
|
OR, USA
|
Posted: 7/25/2013 8:58:36 PM EDT
[#9]
Here is my 6.8 I built a little over a year ago.
Stag lower Aero prec upper Wilson Combat 16" bbl SPC II 1/11 YHM Diamond hand guard PWS comp CTR stock Leupold Mark AR 6-18 x 40 optics & mount Geissele SSA trig 
|
|
|
NE, USA
|
Posted: 8/17/2013 9:20:36 PM EDT
[#10]
Bump for anyone who might have something new.... my 6.8 project fund got turned into baby fund....
|
|
|
|
Posted: 8/17/2013 9:32:54 PM EDT
[#11]
ARP hog IRadicator
|
|
|
|
TX, USA
|
Posted: 10/25/2013 10:25:11 PM EDT
[#12]
18" Wilson combat fluted with 16.7" Noveske NSR and AAC 762SDN6
|
|
|
OK, USA
|
Posted: 10/30/2013 11:19:51 PM EDT
[#13]
Remington R-15 redipped and rebarreled with Bison Armory 16" 6.8 SPC barrel.
Troy TRX-E 13" Trijicon TR20-2 Accupoint LaRue LT104 SPR AAC SDN6 
|
|
|
|
Posted: 11/1/2013 6:21:50 PM EDT
[#14]
LWRC Six8 SPC:
        Some of the mag, with a 5.56 PMAG for comparison.        |
|
|
|
|
Posted: 11/1/2013 6:32:57 PM EDT
[#16]
Quote HistoryOriginally Posted By GGGBeo50: You are pure evil.....that's my jealousy speaking. Hoe did you get? Quote HistoryOriginally Posted By GGGBeo50: Originally Posted By shade_1313: LWRC Six8 SPC: You are pure evil.....that's my jealousy speaking. Hoe did you get? |
|
|
|
TX, USA
|
Posted: 11/1/2013 6:48:20 PM EDT
[#17]
Quote HistoryOriginally Posted By shade_1313:
Northwest Tactical was taking deposits when they were at SHOT, and I jumped on it very early in the process. It shouldn't be long before they're fairly widely available. Quote HistoryOriginally Posted By shade_1313:
Originally Posted By GGGBeo50:
Originally Posted By shade_1313:
LWRC Six8 SPC: You are pure evil.....that's my jealousy speaking. Hoe did you get? I got on a wait list for the 6.8 pmags. I am buying them as desk toys for motivation. |
|
|
|
Posted: 11/1/2013 6:50:26 PM EDT
[#18]
Quote HistoryOriginally Posted By GGGBeo50: I got on a wait list for the 6.8 pmags. I am buying them as desk toys for motivation. Quote HistoryOriginally Posted By GGGBeo50: Originally Posted By shade_1313: Originally Posted By GGGBeo50: Originally Posted By shade_1313: LWRC Six8 SPC: You are pure evil.....that's my jealousy speaking. Hoe did you get? I got on a wait list for the 6.8 pmags. I am buying them as desk toys for motivation. |
|
|
|
TX, USA
|
Posted: 11/2/2013 9:40:00 AM EDT
[#19]
Quote HistoryOriginally Posted By shade_1313:
A wait list? They've been available to order from LWRC directly for a couple of months now, in stock. We'll it was from another site, I wasn't keeping up because I had lost hope recently and just finished an SPR. Do a review if you can and post the link with your pics. |
|
|
WA, USA
|
Posted: 11/3/2013 12:25:47 AM EDT
[#20]
 " />
Put it together this afternoon. I wanted a by-god rifle, not one of yer sissy carbeens. Key bits: Mega billet set, ambi lower. ARP 6.8 SPCII 20" rifle gas target crown barrel. MI 15" Gen 2 rail. Magpul MOE stock. Wilson TTU 2 stage trigger. |
|
|
OK, USA
|
Posted: 11/3/2013 1:21:20 PM EDT
[#21]
Quote HistoryOriginally Posted By shade_1313:
A wait list? They've been available to order from LWRC directly for a couple of months now, in stock. Quote HistoryOriginally Posted By shade_1313:
Originally Posted By GGGBeo50:
Originally Posted By shade_1313:
Originally Posted By GGGBeo50:
Originally Posted By shade_1313:
LWRC Six8 SPC: You are pure evil.....that's my jealousy speaking. Hoe did you get? I got on a wait list for the 6.8 pmags. I am buying them as desk toys for motivation. Are they only going to be in 30 rounders or will they make 15 or 20 rounders too? |
|
|
|
Posted: 11/9/2013 8:13:55 PM EDT
[#22]
My 6.8.. All Palmetto, except a DD Bolt and Carrier. I am IMPRESSED with the function and accuracy if this gun. Heading to Missouri next week to chase whitetails with it.
I am no photographer BTW. |
|
|
|
WA, USA
|
Posted: 11/10/2013 2:20:29 AM EDT
[Last Edit: LRaz]
[#23]
CMT billet upper and lower anodized in Desert Bronze
http://i1314.photobucket.com/albums/t566/LRaz/image_zps7b8a42a6.jpg One month later http://i1314.photobucket.com/albums/t566/LRaz/image_zps092d2746.jpg http://i1314.photobucket.com/albums/t566/LRaz/image_zps7683dd51.jpg Offset Dueck sights with Trijicon night sights placed on the rail. Night sight dots on the rear can't be seen in the usual position. http://i1314.photobucket.com/albums/t566/LRaz/image_zpsbf4cc6ba.jpg Wilson Combat match grade 18" fluted barrel, gas block, midlength tube, LPK Rainier Arms match grade NiB bolt carrier, Mini Compensator, charging handle Fortis 14" rail Geissel 3.5 lb 2 stage trigger Ergo grip Rock River Arms rifle butt stock, tube, spring and buffer Stag Arms bolt PRI 15 round magazine Nightforce NXS Compact 2.5-10x 42mm illuminated and Zero stop with MilR reticle Aero Precision Ultralight scope mount Surefire M600 Scout light in FDE Fired it for the first time today (Hornady 110gr V-Max) and sighted in the irons and scope. Flawless cycling and good accuracy. Weighed it before optics and magazine at 7 1/8 lbs. Very happy with the build. And the round. |
|
|
|
Posted: 1/3/2014 7:35:47 PM EDT
[Last Edit: FreezinSig]
[#24]
Mine I built last spring, summer, and fall. Got to shoot a couple magazines through it before the snow flew.
ASA Side charging upper with stainless modified carrier BHW 18" Mid barrel, standard contour, threaded, matte finish Noveske 6.8 bolt Lancer 15" CF handguard ADM scope mount with Nikon BM 4-16x50 SF BDC scope Valley Armory 6.8 marked lower SSA-E KNS takedown pins Moe + in OD Pictured with PRS but It has a Moe rifle stock now 
And one with Aimpoint PRO before it left the builder 
Pic of it with another lower and a 1-4 
|
|
|
|
MD, USA
|
Posted: 1/12/2014 9:28:19 PM EDT
[#25]
|
|
|
|
Posted: 1/13/2014 12:21:51 PM EDT
[Last Edit: GI_Brat]
[#26]
|
|
|
|
|
Posted: 1/13/2014 6:51:45 PM EDT
[#27]
Am I the only one who can't leave well enough alone?
These are my two 6.8's. The optic on the more modern one is an old Sight Unit Infantry Trilux L2A2 I had laying about. It's actually a very nice 4x scope! 
As is typical, I posted this pic the same day I ordered a rifle stock for the more modern one. I am sick of my beard being ripped. |
|
|
|
|
Posted: 2/18/2014 6:03:45 AM EDT
[#28]
My newest member of the 6.8 family:
|
|
|
|
SC, USA
|
Posted: 2/18/2014 6:50:35 PM EDT
[#29]
6.8spc that I just finished for hogs/deer specs: 18" stainless PSA upper PSA lower BADASS ambi selector KNS anti rotation pins POF single stage trigger ERGO grip VTAC sling Larue RAT stock Fortis 14" REV rail Troy flip up sights Smith Vortex flash hider PRI bolt in a PSA carrier Vortex Viper HS 2.5-10x44 scope in a Burris PEPR mount |
|
|
|
Posted: 2/22/2014 10:10:09 PM EDT
[#30]
Wilson fluted barrel, 12'' MI key mod, Leopold VX2 with LT 104 mount, PRI. mag, RRA 2 stage trigger, BMC med. charging handle, Magpul CTR and MOE grip. 
|
|
|
|
|
Posted: 2/22/2014 10:40:41 PM EDT
[#31]
PSA 14.7 upper and Stag lower, MarkAR in an LT-104
|
|
|
|
FL, USA
|
Posted: 2/23/2014 9:56:28 AM EDT
[#32]
Noveske 10.5 with switchblock.
Rob 
|
|
|
|
Posted: 3/2/2014 9:43:01 AM EDT
[#33]
My first 6.8,
Billet lower and upper from American Armament Daniel Defense 16" barrel and BCG Wilson Combat Accu Tac flash suppressor Magpul CTR stock Battlegrip MI SS gen II Nikon Monarch III 2x8 in SWFA SS mount  " />
|
|
|
|
FL, USA
|
Posted: 3/2/2014 2:40:26 PM EDT
[Last Edit: kpz1234]
[#34]
LWRCi Six8 SPR 14.7" w/ TA33G-11. |
|
|
MD, USA
|
Posted: 3/12/2014 5:06:58 PM EDT
[#35]
IMG_5607.1 by 556 Channel (HD), on Flickr 
IMG_5616 by 556 Channel (HD), on Flickr 
IMG_5624 by 556 Channel (HD), on Flickr |
|
|
OH, USA
|
Posted: 3/21/2014 8:56:34 PM EDT
[#36]
Very,very nice looking weapons.....
|
|
|
USA
|
Posted: 3/22/2014 10:24:39 AM EDT
[#37]
mine
|
|
|
|
Posted: 4/19/2014 5:32:15 PM EDT
[Last Edit: _Crog]
[#38]
|
|
|
|
WA, USA
|
Posted: 4/20/2014 3:03:32 PM EDT
[#39]
RRA LAR-6 with 16" ARP barrel
|
|
|
|
Posted: 4/21/2014 12:22:42 AM EDT
[#40]
|
|
|
|
VA, USA
|
Posted: 4/25/2014 1:44:11 PM EDT
[#41]
Here's my newest AR15, a Lewis Machine and Tool (LMT) Monolithic Rail Platform (MRP) CQB Defender Piston 16. This is a non-catalog item that was a special order. It is one of only two Defender Piston rifles with their "slick" upper. All other LMT rifles with the "slick" upper are either direct impingement (DI) or are the much larger 7.62x51mm. I know I may take some heat for replacing the already excellent SOPMOD stock with a Magpul UBR, but I really love the UBR stock. I also added a Magpul MOE grip, Magpul MBUS Pro folding BUIS, Geissele SSA-E trigger, and Nightforce Optics 1-4x24mm NXS Compact scope on a LaRue LT120 mount. I applied the camouflage pattern myself after completely disassembling the rifle, using Duracoat (base of Magpul FDE with Tactical Woodland Green and Tactical Woodland Brown) and an airbrush. The rifle came with a 5.56x45mm barrel and bolt, but with the MRP's quick-change barrel feature I can swap it out with a 6.8 SPC barrel and bolt, which is what it's equipped with in this picture. Despite the fact that was a 6.8 SPC rifle when this picture was taken, the magazine is one of nine PMAG Gen M3 I painted to match the rifle. These are great for when I'm running the 5.56x45mm barrel and bolt, but don't work reliably with 6.8 SPC. For that, I have several steel Barrett 30-round 6.8 SPC magazines. But I didn't paint those, so I used the PMAG for the picture.
|
|
|
|
Posted: 5/11/2014 11:34:53 AM EDT
[#42]
I'm absolutley loving this setup... PSA CHF Upper, DD Bolt carrier group, Samson 11" rail.
It shoots MOA. I took two deer with it last year in MO, cant wait to hunt with it this fall. Anyone on the fence about a 6.8 as a variant... DO IT!! 
|
|
|
|
|
Posted: 5/11/2014 12:22:39 PM EDT
[#43]
WILSON COMBAT lightweight hunter 16" middy
PRI carbon fiber JP trigger 
back when it had a WHITE OAK ARMORY middy barrel 
Many years ago, I had a RRA middy 6.8 
I really like the 6.8 a lot
|
|
|
|
TX, USA
|
Posted: 5/13/2014 9:44:19 PM EDT
[#44]
After a year in the making, my 6.8 is finally done!
CMT Lower QMS Trigger Group with JP Enterprise Springs Seekins forged Upper AR Performance 16" Scout barrel AR Performance Flash Hider AR Performance Super Bolt Nikon 3-9x50 Scope. Now all i have to do is Shoot IT! 
|
|
|
PA, USA
|
Posted: 7/8/2014 12:28:55 AM EDT
[#45]
Picture was taken with the FDE pic thread in mind. Usually has a Barrett 30rd in there.
|
|
|
|
Posted: 7/8/2014 9:11:00 AM EDT
[#46]
Green one.
|
|
|
|
|
Posted: 9/6/2014 2:13:15 AM EDT
[#47]
The 6.8. ARP 16" scout profile barrel ARP Bolt Voodoo lightweight BCG Lancer LCH FF tube Anderson upper Aero Lightweight Mount Redfield Revolution 2-7X scope Anderson lower Geissele 2 Stage |
|
|
|
OK, USA
|
Posted: 10/20/2014 3:57:02 PM EDT
[#48]
Quote HistoryOriginally Posted By big-Al:
Wilson fluted barrel, 12'' MI key mod, Leopold VX2 with LT 104 mount, PRI. mag, RRA 2 stage trigger, BMC med. charging handle, Magpul CTR and MOE grip. http://www.hunt101.com/data/500/004515.JPG Very nice paint job!! Rattle can, duracoat, dipped, non of the above? |
|
|
MD, USA
|
Posted: 1/25/2015 6:59:06 PM EDT
[#49]
IMG_5066 by 556 Channel (HD), on Flickr 
IMG_5073 by 556 Channel (HD), on Flickr 
IMG_5049 by 556 Channel (HD), on Flickr |
|
|
|
Posted: 1/26/2015 11:18:28 PM EDT
[#50]
6.8spc II 16'' middy Fluted Wilson Combat barrel, Leupold XV -2. Kinda regret camoing it and thinking about trying to strip it down to the base color. Build Thread 
|
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
