User Panel
Originally Posted By Unkydon:
Yeah, I think you might have missed the memo about vertical grips and pistols. Might track that down. But first take off the vertical foregrip take a new picture and replace. If you want you can put an angled foregrip on there like the one Magpul makes. But that's in the memo too. View Quote View All Quotes View All Quotes Originally Posted By Unkydon:
Originally Posted By bgreer:
Ammo will be here tomorrow....BANG BANG 10.5" Chrome Moly Nitride Bath barrel Melonite muzzle brake Forged aluminum upper UTG Slim Pro 9" rail Pistol length gas system Seekins Low Mass melonite BCG Gunfighter 44 ambi charging handle H2 Pistol Buffer Matrix Aerospace Lower Hunter select rubber fore end grip. (may change this, fits my big ass hands, looks monster huge) Parts still to come Troy rear dioptic tritium battle sight Hogue Rubber grip Seekins ambi safety Seekins mag release Seekins bolt stop Seekins trigger guard Sig arm brace Parts still thinking about Geiselle S3G Trigger Franklin Armory Binary Firing System <a href="http://s69.photobucket.com/user/bgreerVTX/media/Mobile%20Uploads/image_28.jpeg.html" target="_blank">http://i69.photobucket.com/albums/i51/bgreerVTX/Mobile%20Uploads/image_28.jpeg</a> Yeah, I think you might have missed the memo about vertical grips and pistols. Might track that down. But first take off the vertical foregrip take a new picture and replace. If you want you can put an angled foregrip on there like the one Magpul makes. But that's in the memo too. Unless it's over 26" overall... |
|
|
Originally Posted By RDTCU:
Unless it's over 26" overall... View Quote View All Quotes View All Quotes Originally Posted By RDTCU:
Originally Posted By Unkydon:
Originally Posted By bgreer:
Ammo will be here tomorrow....BANG BANG 10.5" Chrome Moly Nitride Bath barrel Melonite muzzle brake Forged aluminum upper UTG Slim Pro 9" rail Pistol length gas system Seekins Low Mass melonite BCG Gunfighter 44 ambi charging handle H2 Pistol Buffer Matrix Aerospace Lower Hunter select rubber fore end grip. (may change this, fits my big ass hands, looks monster huge) Parts still to come Troy rear dioptic tritium battle sight Hogue Rubber grip Seekins ambi safety Seekins mag release Seekins bolt stop Seekins trigger guard Sig arm brace Parts still thinking about Geiselle S3G Trigger Franklin Armory Binary Firing System <a href="http://s69.photobucket.com/user/bgreerVTX/media/Mobile%20Uploads/image_28.jpeg.html" target="_blank">http://i69.photobucket.com/albums/i51/bgreerVTX/Mobile%20Uploads/image_28.jpeg</a> Yeah, I think you might have missed the memo about vertical grips and pistols. Might track that down. But first take off the vertical foregrip take a new picture and replace. If you want you can put an angled foregrip on there like the one Magpul makes. But that's in the memo too. Unless it's over 26" overall... Yes. But I don't think that is going to be the case here. Not with a 10.5" Barrel. From my measurements of components I have here (granted I don't have his pistol to measure) he is going to be close but not quite there. I do not think the muzzle break can be included in the length (unless welded). |
|
|
Originally Posted By Unkydon:
Yes. But I don't think that is going to be the case here. Not with a 10.5" Barrel. From my measurements of components I have here (granted I don't have his pistol to measure) he is going to be close but not quite there. I do not think the muzzle break can be included in the length (unless welded). View Quote View All Quotes View All Quotes Originally Posted By Unkydon:
Originally Posted By RDTCU:
Originally Posted By Unkydon:
Originally Posted By bgreer:
Ammo will be here tomorrow....BANG BANG 10.5" Chrome Moly Nitride Bath barrel Melonite muzzle brake Forged aluminum upper UTG Slim Pro 9" rail Pistol length gas system Seekins Low Mass melonite BCG Gunfighter 44 ambi charging handle H2 Pistol Buffer Matrix Aerospace Lower Hunter select rubber fore end grip. (may change this, fits my big ass hands, looks monster huge) Parts still to come Troy rear dioptic tritium battle sight Hogue Rubber grip Seekins ambi safety Seekins mag release Seekins bolt stop Seekins trigger guard Sig arm brace Parts still thinking about Geiselle S3G Trigger Franklin Armory Binary Firing System <a href="http://s69.photobucket.com/user/bgreerVTX/media/Mobile%20Uploads/image_28.jpeg.html" target="_blank">http://i69.photobucket.com/albums/i51/bgreerVTX/Mobile%20Uploads/image_28.jpeg</a> Yeah, I think you might have missed the memo about vertical grips and pistols. Might track that down. But first take off the vertical foregrip take a new picture and replace. If you want you can put an angled foregrip on there like the one Magpul makes. But that's in the memo too. Unless it's over 26" overall... Yes. But I don't think that is going to be the case here. Not with a 10.5" Barrel. From my measurements of components I have here (granted I don't have his pistol to measure) he is going to be close but not quite there. I do not think the muzzle break can be included in the length (unless welded). Nevermind |
|
Обезьяны всех стран, соединитесь!
|
Or, you know, shall not be infringed but then you might as well throw a stock on there.
|
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet |
|
Originally Posted By Unkydon:
Yeah, I think you might have missed the memo about vertical grips and pistols. Might track that down. But first take off the vertical foregrip take a new picture and replace. If you want you can put an angled foregrip on there like the one Magpul makes. But that's in the memo too. View Quote View All Quotes View All Quotes Originally Posted By Unkydon:
Originally Posted By bgreer:
Ammo will be here tomorrow....BANG BANG 10.5" Chrome Moly Nitride Bath barrel Melonite muzzle brake Forged aluminum upper UTG Slim Pro 9" rail Pistol length gas system Seekins Low Mass melonite BCG Gunfighter 44 ambi charging handle H2 Pistol Buffer Matrix Aerospace Lower Hunter select rubber fore end grip. (may change this, fits my big ass hands, looks monster huge) Parts still to come Troy rear dioptic tritium battle sight Hogue Rubber grip Seekins ambi safety Seekins mag release Seekins bolt stop Seekins trigger guard Sig arm brace Parts still thinking about Geiselle S3G Trigger Franklin Armory Binary Firing System Yeah, I think you might have missed the memo about vertical grips and pistols. Might track that down. But first take off the vertical foregrip take a new picture and replace. If you want you can put an angled foregrip on there like the one Magpul makes. But that's in the memo too. I appreciate you guys looking out, however...I thought the rule was 26" or shorter to be considered a pistol. Mine is 27" Franklin Armory has a XOS 26 on their site that is exactly like my set up, complete with a ATF Letter...What am I missin. Regardless, after firing the weapon last weekend, some change has to be made, the damn thing kicks like mule, and is difficult to keep on target for follow up shots |
|
|
My Firearm is 27" overall. The letter Franklin Armory posted on their site said nothing about the muzzle brake....Taking it off and re-thinking it anyway, its ugly and doesn't do what I wanted
|
|
|
|
Cant include the muzzle device in overall length unless it is pinned.
|
|
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet |
|
Originally Posted By Eyekahn: http://i1289.photobucket.com/albums/b510/cwm556/C75C7214-98E1-4DB5-962A-8AE740B1B9BA_zpsldpvaafj.jpg View Quote I dig it. My rig will be undergoing some surgery. I've got a MRP chassis coming in. I'm always still debating an optimal optic... |
|
|
|
|
Originally Posted By Unkydon:
Change of pace. 245 gr MBC loaded and ready. http://www.ar15.com/media/viewFile.html?i=84889 View Quote What's your overall CL? why did you file the feed ramps? |
|
|
Originally Posted By GunSafe:
What's your overall CL? why did you file the feed ramps? View Quote View All Quotes View All Quotes Originally Posted By GunSafe:
Originally Posted By Unkydon:
Change of pace. 245 gr MBC loaded and ready. http://www.ar15.com/media/viewFile.html?i=84889 What's your overall CL? why did you file the feed ramps? COL is 2.231. Feed ramps are as they were from BHW. I had ordered a barrel with their NGE extension (wider feed ramps). It appears they were unable to provide the advertised extension and modified an M4 feed ramp to get it close. I am still waiting on a reply as to if that is what they intended. It does not look pretty but seems to function fine. I must say their customer service has been very good but so far not to the point that I got what I ordered. This is the first barrel they sent but with M4 feed ramps. They said to keep it and sent another barrel a few months later but unfortunately with the filed M4 feed ramps. I suspect the fact that the wrong barrel extension was used was not caught until after all of the expensive fluting etc. and being the second time it had happened someone tried to "fix it." Despite the fact that the feed ramp problem is annoying I must say the barrels have both been extremely accurate. The loads feed fine and do not touch any "riffling" as the BHW barrels use a polygonal rifling. I have had no problems with coating being abraded during feeding and the MBC bullets retain the coating after being fired. No leading at all. The whole idea with this build was to shoot cast subs with large meplats. |
|
|
|
|
Originally Posted By Eyekahn:
<a href="http://s1289.photobucket.com/user/cwm556/media/C75C7214-98E1-4DB5-962A-8AE740B1B9BA_zpsldpvaafj.jpg.html" target="_blank">http://i1289.photobucket.com/albums/b510/cwm556/C75C7214-98E1-4DB5-962A-8AE740B1B9BA_zpsldpvaafj.jpg</a> View Quote Surefire socom fh? Seriously thinking about one, I'd use their "flash can" or whatever it is until Iowa gets rid of the stupid no suppressors law. Then buy me some Surefire muffler love. |
|
|
Originally Posted By racer766:
Surefire socom fh? Seriously thinking about one, I'd use their "flash can" or whatever it is until Iowa gets rid of the stupid no suppressors law. Then buy me some Surefire muffler love. View Quote View All Quotes View All Quotes Originally Posted By racer766:
Originally Posted By Eyekahn:
<a href="http://s1289.photobucket.com/user/cwm556/media/C75C7214-98E1-4DB5-962A-8AE740B1B9BA_zpsldpvaafj.jpg.html" target="_blank">http://i1289.photobucket.com/albums/b510/cwm556/C75C7214-98E1-4DB5-962A-8AE740B1B9BA_zpsldpvaafj.jpg</a> Surefire socom fh? Seriously thinking about one, I'd use their "flash can" or whatever it is until Iowa gets rid of the stupid no suppressors law. Then buy me some Surefire muffler love. AAC |
|
|
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel, and tens of thousands of civilian shooters - ML |
Originally Posted By LaRue_Tactical:
http://img.photobucket.com/albums/v145/AUSTINWFT/LT%20Post/Stealth%202.0_2.jpg_zpsdff2732g.jpeg View Quote Ribbed for whose pleasure? |
|
|
Originally Posted By RDTCU:
Ribbed for whose pleasure? View Quote View All Quotes View All Quotes Originally Posted By RDTCU:
Originally Posted By LaRue_Tactical:
http://img.photobucket.com/albums/v145/AUSTINWFT/LT%20Post/Stealth%202.0_2.jpg_zpsdff2732g.jpeg Ribbed for whose pleasure? That 300 Blk hasn't been cleaned after 2,000 rounds of supersonic 147gr PNW shot full-auto at the ATAC Demo Day in Vegas. |
|
I have been asked to point out that I am LaRue Tactical's owner.
My work has been used by tens of thousands of US Military personnel, and tens of thousands of civilian shooters - ML |
Originally Posted By LaRue_Tactical: http://img.photobucket.com/albums/v145/AUSTINWFT/LT%20Post/Stealth%202.0_2.jpg_zpsdff2732g.jpeg View Quote image by Photographer Pilot, on Flickr Not it's final configuration, this was just for accuracy evaluation yesterday. Now it's got an Aimpoint ML3 SBR Lower 10.3" Ballistic Advantage Performance series barrel ALG 10" EMR Leupold VX-R Patrol 3-9x40 Atlas Bipod |
|
|
Small Arms Master Gunner
If you ain't Cav....you ain't Shit. Double Spur Holder Order of the Black Shamrock #1209 |
|
GEAUX TIGERS!
|
|
|
|
|
"Nobody likes a cybaby, except mommies and Democrats" - Bernadette Rostenkowski
|
Originally Posted By SCOOB141: http://i470.photobucket.com/albums/rr63/wrestler141121/2016-02-27%2013.47.15_zpsxsik9bp2.jpg View Quote |
|
|
Extremism in defense of liberty is no vice. Tolerance in the face of tyranny is no virtue. - Barry Goldwater, 1964
|
|
Keep California out of Arizona
|
|
Anger is a Gift
|
Originally Posted By jparish62: Suppressor is still a ways off, so stock may change depending on balance http://i1121.photobucket.com/albums/l519/jparish62/Mobile%20Uploads/IMG_20160324_091920300_zpsuapg2atb.jpg View Quote Nice stick. The TRIM rail is one of my favorites out there. |
|
|
Originally Posted By RussellAthletic:
Nice stick. The TRIM rail is one of my favorites out there. View Quote View All Quotes View All Quotes Originally Posted By RussellAthletic:
Originally Posted By jparish62:
Suppressor is still a ways off, so stock may change depending on balance http://i1121.photobucket.com/albums/l519/jparish62/Mobile%20Uploads/IMG_20160324_091920300_zpsuapg2atb.jpg Nice stick. The TRIM rail is one of my favorites out there. Thanks! I got that upper in a trade and wasn't sure how I'd feel about the rail, but I love it |
|
Keep California out of Arizona
|
Originally Posted By itgoesboom:
<a href="https://flic.kr/p/DmXgjw" target="_blank">https://farm2.staticflickr.com/1472/24522313030_7665b1f9e2_b.jpg</a>image by Photographer Pilot, on Flickr Not it's final configuration, this was just for accuracy evaluation yesterday. Now it's got an Aimpoint ML3 SBR Lower 10.3" Ballistic Advantage Performance series barrel ALG 10" EMR Leupold VX-R Patrol 3-9x40 Atlas Bipod View Quote How's the BA barrel shoot? Decent accuracy? I just got one in the mail and I'm debating which way to go with it. I'm thinking pistol with a KX3 or 5? It's going to be a while before I can get a can ETA: Pic thread |
|
|
|
Originally Posted By Active:
Did some T&E with the troy PDW stock on Spikes M16 with a 9" BCM upper. Ran perfectly with both subs and supers, suppressed and unsuppressed. https://c2.staticflickr.com/2/1531/25540511841_5f8c6bf361_b.jpg https://c2.staticflickr.com/2/1652/25520177500_d2375fddaa_b.jpg View Quote I'm considering that upper, but I'm wondering about how long the rail is compared to the shoulder on the barrel threads. Is there enough space to attach a taper mount and mount something like a Griffon Recce 7 without rail interference? |
|
Originally Posted By SKD_Tactical:
well if you open your package and there are 27 Black Pmags, 3 FDE Pmags, and a heap of steaming poop in a ziploc bag, then I guess you have your answer. |
Originally Posted By rc109a:
Well here is my input into the thread: http://i272.photobucket.com/albums/jj162/rc109a/IMG_2485_zpsatytrx0u.jpg View Quote This is a unique look that for some odd reason looks pleasing to me. (short rail over a long barrel) |
|
|
Originally Posted By ajtayl03:
I'm considering that upper, but I'm wondering about how long the rail is compared to the shoulder on the barrel threads. Is there enough space to attach a taper mount and mount something like a Griffon Recce 7 without rail interference? View Quote View All Quotes View All Quotes Originally Posted By ajtayl03:
Originally Posted By Active:
Did some T&E with the troy PDW stock on Spikes M16 with a 9" BCM upper. Ran perfectly with both subs and supers, suppressed and unsuppressed. https://c2.staticflickr.com/2/1531/25540511841_5f8c6bf361_b.jpg https://c2.staticflickr.com/2/1652/25520177500_d2375fddaa_b.jpg I'm considering that upper, but I'm wondering about how long the rail is compared to the shoulder on the barrel threads. Is there enough space to attach a taper mount and mount something like a Griffon Recce 7 without rail interference? im not sure how your mount threads on, but I can tell you that with the 9" barrel and 8" rail, the rail comes to right where the threads stop. So an AAC 51t mount works and so does a SilencerCo asr, and so does a direct thread can. But, if you have anything that comes back over the threads at all, it wouldn't work and you would need the 9" barrel with 7" rail. BCM makes great stuff though so I'm sure eyed be happy with it. |
|
|
Originally Posted By BrWn001COW:
nice! what rail? ETA pic thread 8.5" PSA upper + LMT Lower http://i63.tinypic.com/5wxmyc.jpg View Quote View All Quotes View All Quotes Originally Posted By BrWn001COW:
nice! what rail? ETA pic thread 8.5" PSA upper + LMT Lower http://i63.tinypic.com/5wxmyc.jpg Its GTLKM rail I got from MAS defense. Its not proper keymod so I wouldn't get another. Other than that its pretty nice. |
|
GEAUX TIGERS!
|
|
View Quote What barrel length? 8"? |
|
|
Originally Posted By Active:
im not sure how your mount threads on, but I can tell you that with the 9" barrel and 8" rail, the rail comes to right where the threads stop. So an AAC 51t mount works and so does a SilencerCo asr, and so does a direct thread can. But, if you have anything that comes back over the threads at all, it wouldn't work and you would need the 9" barrel with 7" rail. BCM makes great stuff though so I'm sure eyed be happy with it. View Quote View All Quotes View All Quotes Originally Posted By Active:
Originally Posted By ajtayl03:
Originally Posted By Active:
Did some T&E with the troy PDW stock on Spikes M16 with a 9" BCM upper. Ran perfectly with both subs and supers, suppressed and unsuppressed. https://c2.staticflickr.com/2/1531/25540511841_5f8c6bf361_b.jpg https://c2.staticflickr.com/2/1652/25520177500_d2375fddaa_b.jpg I'm considering that upper, but I'm wondering about how long the rail is compared to the shoulder on the barrel threads. Is there enough space to attach a taper mount and mount something like a Griffon Recce 7 without rail interference? im not sure how your mount threads on, but I can tell you that with the 9" barrel and 8" rail, the rail comes to right where the threads stop. So an AAC 51t mount works and so does a SilencerCo asr, and so does a direct thread can. But, if you have anything that comes back over the threads at all, it wouldn't work and you would need the 9" barrel with 7" rail. BCM makes great stuff though so I'm sure eyed be happy with it. BCM's pic: |
|
"The race is not always to the swift, nor the battle to the strong, but that's the way to bet." - Damon Runyon
|
|
Specs on that rife? Nice setup by the way!!
|
|
|
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.