User Panel
User Panel
User Panel
|
Posted: 3/5/2021 7:06:27 PM EDT
[Last Edit: TinyCrumb]
This started off as a general JSOC thread but it's quickly become nothing more than talking about the Noveske Navy, so let's just dedicate it to that.
|
|
|
|
NC, USA
|
Posted: 12/9/2023 12:13:22 PM EDT
[#1]
Quote HistoryOriginally Posted By KTMmx001: LOL Like the KAC rails… I Got a mk12 ff RAS from operation parts in October. Also, my Gen 1 Noveske lower arrived today from Ranier arms. They said they were supposed to get some more |
|
|
|
Posted: 12/10/2023 4:31:24 AM EDT
[#2]
Quote HistoryOriginally Posted By StealthGuy: Sig Romeo 4T on a Wilcox riser. Have also been seen on LVAW and a UKSOF L119A2 in FDE. https://i.imgur.com/U5KuLgF.jpg I may be seeing things but is the castle nut locked down with Rocksett? See the white line around the castle nut? |
|
|
|
|
Posted: 12/10/2023 4:38:13 AM EDT
[Last Edit: M-Forgery]
[#3]
Quote HistoryOriginally Posted By FONTY: I’ve never seen a right hand shooter flip a 3X mag to the left. https://www.ar15.com/media/mediaFiles/236598/F255FFE6-98E7-4D72-B8F9-1275B70E2724_jpe-1855070.JPG That looks odd for sure. I'm a lefty and know that just looks wrong.  Attached FileIt's 100% AAC 300BLACKOUT. That's an EoTech G45 5x magnifier setup to swing to the left. In front is an EoTech EXPS3-2. |
|
|
|
|
Posted: 12/10/2023 12:02:53 PM EDT
[#4]
Quote HistoryOriginally Posted By M-Forgery: I may be seeing things but is the castle nut locked down with Rocksett? See the white line around the castle nut? I think that’s the end plate that might be a little shiny from lots of finish wear. |
|
|
|
OR, USA
|
Posted: 12/12/2023 5:39:36 PM EDT
[#5]
Quote HistoryOriginally Posted By Advance: Because all impressions left in the sand from dropped weapons on the beach at Dam Neck are lacking the iron cross in that specific area. Quote HistoryOriginally Posted By Advance: Originally Posted By KTMmx001: LOL Cloner predators strike again.. How do we know the Noveske logo tube isn’t now being issued? Because all impressions left in the sand from dropped weapons on the beach at Dam Neck are lacking the iron cross in that specific area. Knew it  |
|
|
|
Posted: 12/13/2023 1:43:25 AM EDT
[Last Edit: bigboss91]
[#6]
If anyone needs a Noveske 6 position receiver extension with the OTB drain holes and NO engraved cross, let me know. I have an extra I can let go thats lightly used. RE pictured on top is available, bottom one is already sold.
Tube All are sold, thank you |
|
|
|
|
Posted: 12/13/2023 2:00:22 PM EDT
[#7]
Basic bitch mode.
|
|
|
|
NC, USA
|
Posted: 12/13/2023 4:48:06 PM EDT
[#8]
Quote HistoryFitting....
|
|
|
NC, USA
|
Posted: 12/13/2023 4:55:28 PM EDT
[#9]
Just thought I'd share...
I am running the lightweight commercial 10.5" barrel in 5.56 with a rifle I've been training with primarily. Just wanted to share that I've shot well over 1000 rounds of 556 through it all suppressed with no cleaning or re-lubing (including 500 rounds through a carbine course).... Not one hiccup, not one FTF, FTE, nada..... The pornstar gas ports of these barrels just run and run......   
|
|
|
|
Posted: 12/13/2023 5:17:02 PM EDT
[#10]
Quote HistoryOriginally Posted By JohnnyUtah427: Fitting....  |
|
|
|
MI, USA
|
Posted: 12/14/2023 8:57:44 AM EDT
[#11]
Quote HistoryOriginally Posted By JohnnyUtah427: Just thought I'd share... I am running the lightweight commercial 10.5" barrel in 5.56 with a rifle I've been training with primarily. Just wanted to share that I've shot well over 1000 rounds of 556 through it all suppressed with no cleaning or re-lubing (including 500 rounds through a carbine course).... Not one hiccup, not one FTF, FTE, nada..... The pornstar gas ports of these barrels just run and run...... People rag on Noveske for their gas port size, but there's a reason they're so reliable. Cool update dude! |
|
|
|
Posted: 12/14/2023 4:59:28 PM EDT
[#12]
Quote HistoryOriginally Posted By FONTY: I've never seen a right hand shooter flip a 3X mag to the left. https://www.ar15.com/media/mediaFiles/236598/F255FFE6-98E7-4D72-B8F9-1275B70E2724_jpe-1855070.JPG I have. Some prefer it. They say it is because they can flip it back up by tapping it against their gear, or use their off hand. |
|
|
|
NC, USA
|
Posted: 12/15/2023 9:09:09 AM EDT
[#13]
I've also heard some folks do it to keep it inboard thereby keeping the "outboard" area of the weapon slicker/cleaner to make it less likely to snag on this when moving through structures and such.
|
|
|
|
Posted: 12/15/2023 4:11:19 PM EDT
[#14]
Quote HistoryOriginally Posted By giffmann: I've also heard some folks do it to keep it inboard thereby keeping the "outboard" area of the weapon slicker/cleaner to make it less likely to snag on this when moving through structures and such. Keeps the magnifier lens cleaner from lube etc from the ejection port. |
|
|
|
|
Posted: 12/28/2023 6:17:45 AM EDT
[#15]
Alright boys finally got a lower and need some parts. If anyone has an extra correct buffer tube I’d be in your debt. Can pay. Anything else hard to find I need to snag now?
|
|
|
|
CA, USA
|
Posted: 12/28/2023 4:42:34 PM EDT
[#16]
I dropped my parts off at Cerekote today (two upper setups and one lower). While they were being checked in I noticed quite a bit of difference between the two HG's I had. One one had Noveske marks on both sides and the other was only on one side. Plus the finish was different (not that it matters with cerekote). I got one HG a while back from Midway and the boxing was different than the newer one direct from Noveske. Not sure which is clone correct.
|
|
|
|
Posted: 12/28/2023 6:31:40 PM EDT
[#17]
Quote HistoryOriginally Posted By TheSogster: I dropped my parts off at Cerekote today (two upper setups and one lower). While they were being checked in I noticed quite a bit of difference between the two HG's I had. One one had Noveske marks on both sides and the other was only on one side. Plus the finish was different (not that it matters with cerekote). I got one HG a while back from Midway and the boxing was different than the newer one direct from Noveske. Not sure which is clone correct. |
|
|
|
|
Posted: 12/28/2023 7:00:40 PM EDT
[#18]
Are there any kind of switches that are being used for the NGAL?
|
|
|
|
CA, USA
|
Posted: 12/28/2023 9:52:21 PM EDT
[#19]
Quote HistoryOriginally Posted By LsuJon: One might have bee cerakoted and one might have been anodized. You're gonna want the anodized one for the proper cerakote. Thanks. They are blasting both for prep but I will use the anodized one for my 5.56 upper |
|
|
CA, USA
|
Posted: 12/29/2023 12:55:32 AM EDT
[#20]
Anyone needing a gen 1 lower take a peek at GrabAGun
|
|
|
|
Posted: 12/29/2023 1:59:41 AM EDT
[#21]
Quote HistoryThanks! |
|
|
|
|
Posted: 12/29/2023 3:45:50 AM EDT
[#22]
More at Omaha as well
Gen 1 lower Honestly it’s kinda crappy that Noveske is driving the used market by sayin these are discontinued but then continuing to sell them. People paying 3X as much for a lower because the manufacturer is making them “scarce”. |
|
|
|
|
Posted: 12/29/2023 10:04:29 AM EDT
[#23]
Originally Posted By officerX: Thanks! My order was cancelled this morning. |
|
|
|
CA, USA
|
Posted: 12/30/2023 1:05:14 AM EDT
[#24]
Dang sorry for the bad lead. Got the in stock email from them and figured I’d share since I got what I needed already from Backwater a while back.
Also FYI for anyone looking to purchase the receiver extension from Midway, they will have the engraved logo. |
|
|
|
Posted: 12/30/2023 1:24:29 AM EDT
[#25]
Quote HistoryOriginally Posted By ctw_1994: Dang sorry for the bad lead. Got the in stock email from them and figured I’d share since I got what I needed already from Backwater a while back. Also FYI for anyone looking to purchase the receiver extension from Midway, they will have the engraved logo. It’s all good. I figured they probably oversold them. |
|
|
|
|
Posted: 12/30/2023 1:11:26 PM EDT
[Last Edit: TinyCrumb]
[#26]
Some quality desert time w/ the Navy yesterday.
       
|
|
|
|
|
Posted: 12/31/2023 3:48:42 PM EDT
[#27]
Quote HistoryOriginally Posted By TinyCrumb: Some quality desert time w/ the Navy yesterday. https://i.imgur.com/flgYFvi.jpg https://i.imgur.com/aXN59g6.jpg https://i.imgur.com/YUL1waD.jpg https://i.imgur.com/YZHQ2d4.jpg https://i.imgur.com/PcYQLnm.jpg https://i.imgur.com/gFbXKlK.jpg https://i.imgur.com/1UrV3ZE.jpg https://i.imgur.com/CbrIuwT.jpg  |
|
|
|
|
Posted: 1/3/2024 12:31:47 AM EDT
[#28]
How bad/ghetto/Jerry rigged does this look? I’m playing around with setup and can’t really find a good way to mount it all. Do I have too much on it? I know I’ve never seen anything like this in the ITW pics, but we talk about personal customization……
  
|
|
|
|
|
Posted: 1/3/2024 1:52:24 AM EDT
[Last Edit: LsuJon]
[#29]
Quote HistoryOriginally Posted By officerX: How bad/ghetto/Jerry rigged does this look? I'm playing around with setup and can't really find a good way to mount it all. Do I have too much on it? I know I've never seen anything like this in the ITW pics, but we talk about personal customization https://www.ar15.com/media/mediaFiles/335460/IMG_1194-3080182.jpg https://www.ar15.com/media/mediaFiles/335460/IMG_1195-3080183.jpg https://www.ar15.com/media/mediaFiles/335460/IMG_1196-3080184.jpg |
|
|
|
|
Posted: 1/3/2024 2:28:26 AM EDT
[#30]
Quote HistoryOriginally Posted By LsuJon: you want me to be honest? lol Why not just mount it in the first mlok position on the left hand side withh a normal clicky cap? Not enough room to still grip? Of course I want you to be honest! I didn’t try the left because I didn’t think there would be enough room the way I grip it. I put it on like this and it’s surprisingly not that bad! I think I’ll probably leave it like this.  
|
|
|
|
|
Posted: 1/3/2024 2:39:41 AM EDT
[#31]
Quote HistoryOriginally Posted By officerX: Of course I want you to be honest! I didn't try the left because I didn't think there would be enough room the way I grip it. I put it on like this and it's surprisingly not that bad! I think I'll probably leave it like this. https://www.ar15.com/media/mediaFiles/335460/IMG_1202-3080248.jpg https://www.ar15.com/media/mediaFiles/335460/IMG_1203-3080249.jpg I had a cqbr/mk18 setup up in a similar fashion years ago.  Attached FileFor tax purposes, Old photo of the navy:  Attached File |
|
|
|
|
Posted: 1/3/2024 9:23:28 AM EDT
[Last Edit: trapsh00ter99]
[#32]
Quote HistoryOriginally Posted By officerX: Of course I want you to be honest! I didn't try the left because I didn't think there would be enough room the way I grip it. I put it on like this and it's surprisingly not that bad! I think I'll probably leave it like this. https://www.ar15.com/media/mediaFiles/335460/IMG_1202-3080248.jpg https://www.ar15.com/media/mediaFiles/335460/IMG_1203-3080249.jpg  Thinking of switching out my EXPS3 on riser for an NX8 with a red dot at 12. I hate that the nicest gun I have a can't run my COTS with. Other option is a magnifier behind Eotech with the COTS on a unity absolute riser, but a 1-8 seems superior. Red dot on top of LPVO should still be useable even with thermal mounted, which wouldn't be the case with a magnifier. |
|
|
|
TX, USA
|
Posted: 1/3/2024 9:41:50 AM EDT
[#33]
Quote HistoryOriginally Posted By officerX: How bad/ghetto/Jerry rigged does this look? I’m playing around with setup and can’t really find a good way to mount it all. Do I have too much on it? I know I’ve never seen anything like this in the ITW pics, but we talk about personal customization…… https://www.ar15.com/media/mediaFiles/335460/IMG_1194-3080182.jpg https://www.ar15.com/media/mediaFiles/335460/IMG_1195-3080183.jpg https://www.ar15.com/media/mediaFiles/335460/IMG_1196-3080184.jpg Looks like a 24th sts setup lol |
|
|
|
Posted: 1/6/2024 3:39:59 AM EDT
[#34]
Omaha lower orders got refunded. Stated “system glitch” took them a week to figure that out but here we are looking for another lower. Knowing noveske though they’ll drop more
|
|
|
|
|
Posted: 1/6/2024 12:51:00 PM EDT
[#35]
Quote HistoryOriginally Posted By JRSECO: Omaha lower orders got refunded. Stated “system glitch” took them a week to figure that out but here we are looking for another lower. Knowing noveske though they’ll drop more Same happened to me. |
|
|
|
FL, USA
|
Posted: 1/8/2024 11:07:38 AM EDT
[#36]
Quote HistoryOriginally Posted By officerX: How bad/ghetto/Jerry rigged does this look? I’m playing around with setup and can’t really find a good way to mount it all. Do I have too much on it? I know I’ve never seen anything like this in the ITW pics, but we talk about personal customization…… https://www.ar15.com/media/mediaFiles/335460/IMG_1194-3080182.jpg https://www.ar15.com/media/mediaFiles/335460/IMG_1195-3080183.jpg https://www.ar15.com/media/mediaFiles/335460/IMG_1196-3080184.jpg Looks awsome to me. |
|
|
|
Posted: 1/8/2024 4:55:30 PM EDT
[Last Edit: trapsh00ter99]
[#37]
Has anyone else used the BH 77 TMK and had not good luck with it in these barrels also? It seems to be readily available right now. Razorcore has been what I settled on for this gun, but the TMK would really extend the frag distance.
Also considering the Barnes 70gr TSX to try. Got ATACR inbound. Going to switch out the EXPS for that with a piggybacked red dot and give that a run. That's why I'm considering some ammo loads with longer expansion ranges for if I take this yote hunting. |
|
|
|
|
Posted: 1/8/2024 7:40:13 PM EDT
[#38]
What issues are you having with 77gr TMK in your barrel?
|
|
|
|
|
Posted: 1/8/2024 7:44:47 PM EDT
[#39]
Quote HistoryOriginally Posted By stickyheat: What issues are you having with 77gr TMK in your barrel? |
|
|
|
|
Posted: 1/11/2024 10:32:41 AM EDT
[#40]
 Yes!!!!! (I know it's not a NF mount, but o well...) |
|
|
|
FL, USA
|
Posted: 1/12/2024 7:49:15 AM EDT
[#41]
Anyone know where I might be able to pick up a 300blk lightweight barrel? I've looked everywhere and can't find one.
|
|
|
NC, USA
|
Posted: 1/13/2024 3:56:57 PM EDT
[Last Edit: JohnnyUtah427]
[#42]
Doesn’t get as much attention as the 556….
|
|
|
TX, USA
|
Posted: 1/13/2024 7:59:12 PM EDT
[#43]
Quote HistoryOriginally Posted By LsuJon: One might have bee cerakoted and one might have been anodized. You're gonna want the anodized one for the proper cerakote. So there is both ano and cerakoted black handguards out there? What about uppers? |
|
|
|
Posted: 1/13/2024 8:20:24 PM EDT
[#44]
Quote HistoryOriginally Posted By M4A1SOPMOD: So there is both ano and cerakoted black handguards out there? What about uppers? Generally, buying a complete upper will be cerakoted. Stand alone parts are generally anodized. Ask me how I know
|
|
|
|
|
Posted: 1/13/2024 8:44:16 PM EDT
[#45]
Quote HistoryOriginally Posted By LsuJon: Yes. Generally, buying a complete upper will be cerakoted. Stand alone parts are generally anodized. Ask me how I know |
|
|
|
|
Posted: 1/15/2024 11:07:53 AM EDT
[#46]
Quote HistoryOriginally Posted By trapsh00ter99: https://www.ar15.com/media/mediaFiles/184365/IMG_7838-3089986.jpg Yes!!!!! (I know it's not a NF mount, but o well...) I see you share my affinity for the best SBR grip on the market. Consider having it Cerakoted.  Attached File |
|
|
|
|
Posted: 1/15/2024 12:47:20 PM EDT
[#47]
Quote HistoryOriginally Posted By Advance: I see you share my affinity for the best SBR grip on the market. Consider having it Cerakoted. https://www.ar15.com/media/mediaFiles/309598/PXL_20210801_230124825_Original_jpeg-3095283.JPG Messed around with laser and light placement over the weekend. Got the light at 1:30 and laser at 3...trying to figure out a set up to allow clip on thermal. Sold my Steiner and looking to upgrade. The Voodoo/Skeetir types are just way to much. The absolute upper limit would be the Eotech ClipIR, couple of used ones up for sale. Problem is it would block my reddot. I hate that it's Chinesium, but the thermal that makes the most sense is the RH25. Shortest in length and height, and FTS capable. Trying to find the goldilocks night/day set up that I could run a carbine course with, keep beside, or go yote hunting with. Also ordered some Black Hills 62gr Dual Performance. Will do some group testing at 100 and 275 (max range at my home). |
|
|
|
|
Posted: 1/15/2024 7:11:04 PM EDT
[#48]
Snow level loaded.
|
|
|
|
NC, USA
|
Posted: 1/15/2024 8:51:38 PM EDT
[#49]
Quote HistoryAirsofty…. |
|
|
|
Posted: 1/15/2024 10:08:27 PM EDT
[Last Edit: 2Keylows]
[#50]
Quote HistoryOriginally Posted By JohnnyUtah427: Airsofty…. Eta: But it is probably airsoft. |
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
