User Panel
Posted: 6/8/2014 1:20:29 AM EDT
BEWARE...I bought Gen3 pmags a few weeks ago and the feed lips HAVE STRETCHED! A slight flick of the wrist or a slight bump when inserting it and the second round comes up slightly and keeps the mag from seating in the well. I keep 28 rounds in them (30 round mags). I discovered this while at the range and could not seat the mags. HOWEVER, I have one gen2 pmag and it has NOT stretched to date. Gen3 mags have either stretched or are made to wide at the lip, not sure which one, but my guess is that they are made a hair to wide. You can see a pic at the address below written by another guy complaining of the same thing on a different forum. waiting for a reply from magpul. I will be calling them this week. Take the gen3 mag and hold it from the bottom (just like you are inserting it) and give it a flick of the wrist away from you and the second round will rise up slightly keeping it from inserting in the mag well. this means a slight bump and your mag wont insert. Also happens when i try to insert it into the mag well and it hits the bottom of the carrier . The gen2 mag wont do this no matter how hard i try. This is a defect of the gen3 mag. If i have to push the rounds down to align them every time i need to insert a mag, they are useless. After some searching I found this: (Scroll down to the pic) Thoughts?
http://www.m4carbine.net/showthread.php?145766-PMAGs-not-Seating-via-Push-Pull/page2 |
|
Quoted: Take the gen3 mag and hold it from the bottom (just like you are inserting it) and give it a flick of the wrist away from you and the second round will rise up slightly keeping it from inserting in the mag well. this means a slight bump and your mag wont insert.
View Quote I was able to replicate that with an M3. I could not do that with Gen 1 (20 & 30), Fusil, or Okay's. (I own no M2's or MOE's) |
|
Quoted:
Quoted:
Quoted:
Quoted:
Post count : check Join date: check View Quote Florida: check View Quote View Quote I don't see how any of the above comments are beneficial to this thread: check View Quote "Red 5 standing by!" Seriously, OP, talk to magpul, I'm sure they would be as perplexed as you are, and would want them back to look at them. |
|
Quoted:
Quoted:
Quoted:
Post count : check Join date: check View Quote Florida: check View Quote View Quote Disappear and let the men talk. No room for ignorance when lives are at stake. Companies make better products when people like me use them in the real world and inform them of any issues. Go back to sleep. |
|
I managed to replicate this with 1 mag.
I'll have to try it with some others when I get home. I will say though, that I was also able to clear up the problem on that 1 mag that I tried by pressing down on the rounds very forcefully several times. Hell if know how that helps, but it seemed to help. |
|
Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
Post count : check Join date: check View Quote Florida: check View Quote View Quote I don't see how any of the above comments are beneficial to this thread: check View Quote "Red 5 standing by!" Seriously, OP, talk to magpul, I'm sure they would be as perplexed as you are, and would want them back to look at them. View Quote I already wrote them an email and will be calling them on monday, thanks |
|
Quoted:
Are we putting 31 rounds in the magazine? View Quote No, I did many tests with 30 rounds down to 2. The less rounds in the Gen3 mag, the easier it was for the rounds to move around, but also easier to seat the mag. Note: The mags did worse in the heat than at room temp. The rounds moved much easier in the heat. |
|
I'm going to move this to the Magpul Industry forum In the future contact the manufacturer first so they have a chance to rectify the problem |
|
I'm sure that Magpul would love to inspect your magazine and would send you a replacement M2. Go to their industry forum or PM them.
Never seen it btw. All mine are g2g and most are kept topped off. |
|
Quoted:
Fuck me. I just bought 90 of the damned things! View Quote |
|
No, there is nothing wrong with them... as long as you don't try fast reloads or try to reload without pushing down the rounds first. You should have no problem. Just gently grab them and insert them into the mag well sloooowly to insure no movement of the rounds.
|
|
Quoted:
Fuck me. I just bought 90 of the damned things! View Quote Sorry to hear it, I would send them back to be honest. The gen2 seem to work better, but not better than NHMTG with magpul follower or USGI. Never EVER a problem. By the way, I am a big fan of magpul product's. |
|
Quoted:
No, there is nothing wrong with them... as long as you don't try fast reloads or try to reload without pushing down the rounds first. You should have no problem. Just gently grab them and insert them into the mag well sloooowly to insure no movement of the rounds. View Quote Someone trying to bash pmags? As soon as they join? |
|
Quoted:
Post count : check Join date: check View Quote Florida: check |
|
Quoted: Quoted: Post count : check Join date: check View Quote Florida: check View Quote |
|
Quoted:
Quoted:
Quoted:
Post count : check Join date: check View Quote Florida: check View Quote View Quote I don't see how any of the above comments are beneficial to this thread: check |
|
Quoted:
I managed to replicate this with 1 mag. I'll have to try it with some others when I get home. I will say though, that I was also able to clear up the problem on that 1 mag that I tried by pressing down on the rounds very forcefully several times. Hell if know how that helps, but it seemed to help. View Quote This comment got shuffled to the top of the thread in the move. |
|
OP, you might want to read this thread M3 issues and resolution
|
|
View Quote Thanks for the link |
|
This happened to me: Pmag gen2 GTG -- gen3, not so much
Magpul swapped them out at no charge for 2014 dated gen3 mags that did seem to work, but I sold the replacements and changed to Lancer AWMs. |
|
Quoted:
This happened to me: Pmag gen2 GTG -- gen3, not so much Magpul swapped them out at no charge for 2014 dated gen3 mags that did seem to work, but I sold the replacements and changed to Lancer AWFs. View Quote Here is my reply to Magpul on another thread about this. I will look at Lancer too. http://www.ar15.com/forums/t_2_124/235389_.html&page=7&anc=2383944#i2383944 |
|
Quoted:
Here is my reply to Magpul on another thread about this. I will look at Lancer too. http://www.ar15.com/forums/t_2_124/235389_.html&page=7&anc=2383944#i2383944 View Quote View All Quotes View All Quotes Quoted:
Quoted:
This happened to me: Pmag gen2 GTG -- gen3, not so much Magpul swapped them out at no charge for 2014 dated gen3 mags that did seem to work, but I sold the replacements and changed to Lancer AWFs. Here is my reply to Magpul on another thread about this. I will look at Lancer too. http://www.ar15.com/forums/t_2_124/235389_.html&page=7&anc=2383944#i2383944 Here is a recent thread in the Lancer forum. > Link. |
|
Quoted:
I can't replicate your problem with my few M3's. View Quote Try putting the mag in and out several times with force. If you do it slowly it works most of the time. In my opinion though, it should seat most of the time no matter what. What is the time stamp on your mags. Seems they may have addressed the problem. Update: They have done nothing. |
|
View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
This happened to me: Pmag gen2 GTG -- gen3, not so much Magpul swapped them out at no charge for 2014 dated gen3 mags that did seem to work, but I sold the replacements and changed to Lancer AWFs. Here is my reply to Magpul on another thread about this. I will look at Lancer too. http://www.ar15.com/forums/t_2_124/235389_.html&page=7&anc=2383944#i2383944 Here is a recent thread in the Lancer forum. > Link. And a rather isolated incident at that, whereas multiple ARFCOM users have reported issues with gen 3 Pmags. No magazine is perfect, but I personally feel a little more confident with the Lancer AWMs. If the AWMs didn't exist, I would probably go back to Pmag gen3s so long as they're 2014 production. |
|
Quoted: Try putting the mag in and out several times with force. If you do it slowly it works most of the time. In my opinion though, it should seat most of the time no matter what. What is the time stamp on your mags. Seems they may have addressed the problem. View Quote View All Quotes View All Quotes Quoted: Quoted: I can't replicate your problem with my few M3's. Try putting the mag in and out several times with force. If you do it slowly it works most of the time. In my opinion though, it should seat most of the time no matter what. What is the time stamp on your mags. Seems they may have addressed the problem. No seating problems here with M3's |
|
|
Quoted:
Which marking is the timestamp, and how do you read it? View Quote View All Quotes View All Quotes Quoted:
Quoted:
What is the time stamp on your mags. Seems they may have addressed the problem. Which marking is the timestamp, and how do you read it? It's the circle with the little arrow inside. Wherever the arrow is pointing is the month, and the year is bisected by the arrow. |
|
Quoted:
It's the circle with the little arrow inside. Wherever the arrow is pointing is the month, and the year is bisected by the arrow. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
What is the time stamp on your mags. Seems they may have addressed the problem. Which marking is the timestamp, and how do you read it? It's the circle with the little arrow inside. Wherever the arrow is pointing is the month, and the year is bisected by the arrow. So it seems that mine were made in 2013. I just checked, and I was able to replicate the problem with some more mags. How should I go about asking Magpul to exchange with me? |
|
Quoted:
So it seems that mine were made in 2013. I just checked, and I was able to replicate the problem with some more mags. How should I go about asking Magpul to exchange with me? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
What is the time stamp on your mags. Seems they may have addressed the problem. Which marking is the timestamp, and how do you read it? It's the circle with the little arrow inside. Wherever the arrow is pointing is the month, and the year is bisected by the arrow. So it seems that mine were made in 2013. I just checked, and I was able to replicate the problem with some more mags. How should I go about asking Magpul to exchange with me? Email them at: [email protected] Thanks for acknowledging the issue |
|
Quoted:
So it seems that mine were made in 2013. I just checked, and I was able to replicate the problem with some more mags. How should I go about asking Magpul to exchange with me? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
What is the time stamp on your mags. Seems they may have addressed the problem. Which marking is the timestamp, and how do you read it? It's the circle with the little arrow inside. Wherever the arrow is pointing is the month, and the year is bisected by the arrow. So it seems that mine were made in 2013. I just checked, and I was able to replicate the problem with some more mags. How should I go about asking Magpul to exchange with me? It looks like the 4/13 and 5/13 date code has had problems based on what been posted online |
|
Quoted:
It looks like the 4/13 and 5/13 date code has had problems based on what been posted online View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
Quoted:
What is the time stamp on your mags. Seems they may have addressed the problem. Which marking is the timestamp, and how do you read it? It's the circle with the little arrow inside. Wherever the arrow is pointing is the month, and the year is bisected by the arrow. So it seems that mine were made in 2013. I just checked, and I was able to replicate the problem with some more mags. How should I go about asking Magpul to exchange with me? It looks like the 4/13 and 5/13 date code has had problems based on what been posted online And 6/13 as was my case. |
|
View Quote I've now emailed them at tech support as well as customer service. No response from either dept. but I assume they have a very high volume of emails to answer. What is the typical time for a response? |
|
Quoted:
I've now emailed them at tech support as well as customer service. No response from either dept. but I assume they have a very high volume of emails to answer. What is the typical time for a response? View Quote View All Quotes View All Quotes Quoted:
I've now emailed them at tech support as well as customer service. No response from either dept. but I assume they have a very high volume of emails to answer. What is the typical time for a response? I called them today and the guy said he was looking at my email, but yet he did not respond to it. .hmm... but because I called him he said he will replace them no problem. He also said that He never heard of a problem with the 30rd mags. B.S. They will not admit that there is a problem. He was rude the whole time acting like I was making this up. I told him I'll make a video and post it on youtube and send it to them. He replied with a NO. Well here it is, let me know what you all think. I'm not letting this issue go: https://www.youtube.com/watch?v=4QNQ7IOl5sk&feature=youtu.be |
|
Quoted:
I called them today and the guy said he was looking at my email, but yet he did not respond to it. .hmm... but because I called him he said he will replace them no problem. He also said that He never heard of a problem with the 30rd mags. B.S. They will not admit that there is a problem. He was rude the whole time acting like I was making this up. I told him I'll make a video and post it on youtube and send it to them. He replied with a NO. Well here it is, let me know what you all think. I'm not letting this issue go: https://www.youtube.com/watch?v=4QNQ7IOl5sk&feature=youtu.be View Quote View All Quotes View All Quotes Quoted:
Quoted:
I've now emailed them at tech support as well as customer service. No response from either dept. but I assume they have a very high volume of emails to answer. What is the typical time for a response? I called them today and the guy said he was looking at my email, but yet he did not respond to it. .hmm... but because I called him he said he will replace them no problem. He also said that He never heard of a problem with the 30rd mags. B.S. They will not admit that there is a problem. He was rude the whole time acting like I was making this up. I told him I'll make a video and post it on youtube and send it to them. He replied with a NO. Well here it is, let me know what you all think. I'm not letting this issue go: https://www.youtube.com/watch?v=4QNQ7IOl5sk&feature=youtu.be That is exactly what I experienced with a forged MEGA lower. I had gen3 20-rounders. |
|
Can you PM me the phone number you called?
I'm not about to sit on 90 little problems or re-sell them to some other unlucky SOB |
|
We have made a number of minor changes to M3 magazines through production. Same thing with the M2 magazine.
Anyone having any issues with any PMag let us know and we will investigate and make it right. This feedback helps to consistently apply improvements and build a better magazine. If you have any issues that remain unresolved please contact me directly and I will take care of it. |
|
Quoted:
We have made a number of minor changes to M3 magazines through production. Same thing with the M2 magazine. Anyone having any issues with any PMag let us know and we will investigate and make it right. This feedback helps to consistently apply improvements and build a better magazine. If you have any issues that remain unresolved please contact me directly and I will take care of it. View Quote Funny, I talked to tech support yesterday and they said "i never heard of this" with the 30 round mags. I also asked specifically what changes were made to the gen3 and they said that a small change was made to the 20 round mag and NO change to the 30 round mag. Who is right? I hope it was fixed but how many defective mags are in the hands of citizens and Law Enforcement that have no clue of a problem with there mags. Where can I get these improved mags? The mags being shipped are a year old. RECALL EVERY MAGAZINE BEFORE AN INCIDENT OCCURS! |
|
Quoted:
Funny, I talked to tech support yesterday and they said "i never heard of this" with the 30 round mags. I also asked specifically what changes were made to the gen3 and they said that a small change was made to the 20 round mag and NO change to the 30 round mag. Who is right? I hope it was fixed but how many defective mags are in the hands of citizens and Law Enforcement that have no clue of a problem with there mags. Where can I get these improved mags? The mags being shipped are a year old. RECALL EVERY MAGAZINE BEFORE AN INCIDENT OCCURS! View Quote View All Quotes View All Quotes Quoted:
Quoted:
We have made a number of minor changes to M3 magazines through production. Same thing with the M2 magazine. Anyone having any issues with any PMag let us know and we will investigate and make it right. This feedback helps to consistently apply improvements and build a better magazine. If you have any issues that remain unresolved please contact me directly and I will take care of it. Funny, I talked to tech support yesterday and they said "i never heard of this" with the 30 round mags. I also asked specifically what changes were made to the gen3 and they said that a small change was made to the 20 round mag and NO change to the 30 round mag. Who is right? I hope it was fixed but how many defective mags are in the hands of citizens and Law Enforcement that have no clue of a problem with there mags. Where can I get these improved mags? The mags being shipped are a year old. RECALL EVERY MAGAZINE BEFORE AN INCIDENT OCCURS! The particular incenident you are referring to was mainly on early 20 round PMag M3s. It was with a specific ammo combination and took us over a month of testing just to be able to reproduce the issue consistently. Once the issue was identified a resolution was designed, tested and made as an engineering change to the M3 20 round magazine. For consistency the change was carried across the entire M3 line. |
|
Quoted:
The particular incenident you are referring to was mainly on early 20 round PMag M3s. It was with a specific ammo combination and took us over a month of testing just to be able to reproduce the issue consistently. Once the issue was identified a resolution was designed, tested and made as an engineering change to the M3 20 round magazine. For consistency the change was carried across the entire M3 line. View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
We have made a number of minor changes to M3 magazines through production. Same thing with the M2 magazine. Anyone having any issues with any PMag let us know and we will investigate and make it right. This feedback helps to consistently apply improvements and build a better magazine. If you have any issues that remain unresolved please contact me directly and I will take care of it. Funny, I talked to tech support yesterday and they said "i never heard of this" with the 30 round mags. I also asked specifically what changes were made to the gen3 and they said that a small change was made to the 20 round mag and NO change to the 30 round mag. Who is right? I hope it was fixed but how many defective mags are in the hands of citizens and Law Enforcement that have no clue of a problem with there mags. Where can I get these improved mags? The mags being shipped are a year old. RECALL EVERY MAGAZINE BEFORE AN INCIDENT OCCURS! The particular incenident you are referring to was mainly on early 20 round PMag M3s. It was with a specific ammo combination and took us over a month of testing just to be able to reproduce the issue consistently. Once the issue was identified a resolution was designed, tested and made as an engineering change to the M3 20 round magazine. For consistency the change was carried across the entire M3 line. So what magazine production date marks the beginning of these changes? |
|
Quoted:
So what magazine production date marks the beginning of these changes? View Quote View All Quotes View All Quotes Quoted:
Quoted:
Quoted:
Quoted:
We have made a number of minor changes to M3 magazines through production. Same thing with the M2 magazine. Anyone having any issues with any PMag let us know and we will investigate and make it right. This feedback helps to consistently apply improvements and build a better magazine. If you have any issues that remain unresolved please contact me directly and I will take care of it. Funny, I talked to tech support yesterday and they said "i never heard of this" with the 30 round mags. I also asked specifically what changes were made to the gen3 and they said that a small change was made to the 20 round mag and NO change to the 30 round mag. Who is right? I hope it was fixed but how many defective mags are in the hands of citizens and Law Enforcement that have no clue of a problem with there mags. Where can I get these improved mags? The mags being shipped are a year old. RECALL EVERY MAGAZINE BEFORE AN INCIDENT OCCURS! The particular incenident you are referring to was mainly on early 20 round PMag M3s. It was with a specific ammo combination and took us over a month of testing just to be able to reproduce the issue consistently. Once the issue was identified a resolution was designed, tested and made as an engineering change to the M3 20 round magazine. For consistency the change was carried across the entire M3 line. So what magazine production date marks the beginning of these changes? Also, what were the changes that were made? I think it had something to do with the followers, so some before and after pictures would be great in helping us determine if we have problem mags. |
|
Production dates of the affected M3 Mags would be very helpful. I have 80 of these M3s in the wrapper.
|
|
We brought this issue up in a meeting today and we are going to go over the testing and changes that were made along with some test firing to confirm a few things.
Overall this has not been an operational issue but for anyone with concerns we will make sure any problem is identified and resolved. I will post more once I get more info. |
|
I can duplicate the same issue as the OP with my 10/2013 M3 mag. The second round shifts when the mag is flicked in the same manner as in the OP's video. I couldn’t get that mag to fail with hard insertion however. It isn't too far fetched for this shift of the second round to occur during rough handling. A bit disappointing.
I have other M3 mags dated 6/2013 and some that are dated later in the year. |
|
Quoted:
Funny, I talked to tech support yesterday and they said "i never heard of this" with the 30 round mags. I also asked specifically what changes were made to the gen3 and they said that a small change was made to the 20 round mag and NO change to the 30 round mag. Who is right? I hope it was fixed but how many defective mags are in the hands of citizens and Law Enforcement that have no clue of a problem with there mags. Where can I get these improved mags? The mags being shipped are a year old. RECALL EVERY MAGAZINE BEFORE AN INCIDENT OCCURS! View Quote View All Quotes View All Quotes Quoted:
Quoted:
We have made a number of minor changes to M3 magazines through production. Same thing with the M2 magazine. Anyone having any issues with any PMag let us know and we will investigate and make it right. This feedback helps to consistently apply improvements and build a better magazine. If you have any issues that remain unresolved please contact me directly and I will take care of it. Funny, I talked to tech support yesterday and they said "i never heard of this" with the 30 round mags. I also asked specifically what changes were made to the gen3 and they said that a small change was made to the 20 round mag and NO change to the 30 round mag. Who is right? I hope it was fixed but how many defective mags are in the hands of citizens and Law Enforcement that have no clue of a problem with there mags. Where can I get these improved mags? The mags being shipped are a year old. RECALL EVERY MAGAZINE BEFORE AN INCIDENT OCCURS! Fatty, I understand your frustration, but do you really need to be combative? Magpul is literally one of the greatest companies ever, and they've been through a lot in the last couple of years. Its obvious to anyone who looks, that Magpul is dedicated to making the very best products they can and correcting their mistakes in a responsible manner, but all of the above takes time! And are you going to tell me that this is the very first time you've spoken to somebody who is not a public representative for a company who didn't have all of the details on a particular problem? Maybe the person you talked to wasn't trying to jerk you around. Maybe they're just new on the job or something. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.