User Panel
User Panel
User Panel
|
Posted: 8/5/2013 1:58:27 PM EDT
[#1]
.... yes feel free....
|
|
|
|
Posted: 8/5/2013 3:49:26 PM EDT
[#2]
You may know this, but the "Advertise," "User Agreement," "Contact," and "About" links at the bottom right do not lead anywhere but a refresh of the gunstruction builder.
|
|
|
|
Posted: 8/5/2013 4:03:17 PM EDT
[#3]
Don't forget that you can hide most of the UI for a clean screenshot by hitting H on your keyboard!
|
|
|
|
Posted: 8/5/2013 5:02:34 PM EDT
[#4]
http://i.imgur.com/RFpO6Qp.png
|
|
|
|
Posted: 8/5/2013 5:09:44 PM EDT
[#5]
|
|
|
|
Posted: 8/5/2013 5:11:06 PM EDT
[#6]
http://i824.photobucket.com/albums/zz162/GTP_AllenT2/ScreenShot2013-08-05at25700PM.png
Damn Now I just need an extra $2,500 |
|
|
|
Posted: 8/5/2013 5:44:20 PM EDT
[#7]
So far, the biggest issue I found is that the Aimpoint T-1 is not rendering when I cowitness it. Here is the rifle I built in the Accessories view.
 No optic appears when I go to cowitness view.  Additionally, I was building a dissipator like my rifle, but I found that MOE rifle length handguards were not compatible with a low-pro gas block. Maybe the low pro gas block is actually too tall for that config? I was using the 0.750" Troy low pro. I think that it would be helpful if you had the part name displayed with each part as you're selecting through them. For example, I was trying to construct a rifle as close to my personal rifle as possible. It would have been much easier if I had a list of names that I could see since the part pictures tend to be small and difficult to distinguish (at least to this AR lay-person) brand-wise.
|
|
|
|
Posted: 8/5/2013 5:49:40 PM EDT
[#8]
|
|
|
|
Posted: 8/5/2013 6:02:12 PM EDT
[#9]
Quote HistoryQuoted:
So far, the biggest issue I found is that the Aimpoint T-1 is not rendering when I cowitness it. Here is the rifle I built in the Accessories view. http://i.imgur.com/HnJgitN.png For this it looks like you have a riser but no mount, or the mount isn't snapped to the rail. When you go into co-witness anything that isn't attached to the rail is not displayed. Try again by adding the t1 mount, then the riser on top of it (it will snap together) and then the t1, and the whole thing should snap onto the rail when it's close. It should be cowitnessable at that point (Just tested it myself) For the dissipator you can get the look by using rifle length gas system, front sight block, MOE rifle length, and the J&T heavy 16in barrel. Using a carbine or mid length gas system with a low-profile gas block for that set up is something we want to support though! |
|
|
|
Posted: 8/5/2013 7:02:00 PM EDT
[#10]
User error. That makes sense.
 I'll keep playing.
|
|
|
|
Posted: 8/5/2013 10:33:35 PM EDT
[#11]
|
|
|
|
Posted: 8/6/2013 7:29:02 AM EDT
[#12]
Quote HistoryLarue Costa replica? nice |
|
|
|
Posted: 8/6/2013 7:36:10 AM EDT
[#13]
Not iPad friendly? Or operator error.
|
|
|
|
Posted: 8/6/2013 8:14:51 AM EDT
[#14]
Initially GUNSTRUCTION will just be for the web, we will be working on an ipad version later on.
|
|
|
|
Posted: 8/6/2013 8:16:37 AM EDT
[#15]
I rikie !
 i lied im not authorized SO..... I no fin RIKIE ! |
|
|
|
Posted: 8/6/2013 8:25:29 AM EDT
[#16]
These look great so far. I'm bummed I missed out on the beta raffle, looks like I'll be waiting till next month.
|
|
|
|
Posted: 8/6/2013 8:42:33 AM EDT
[#17]
So far, I haven't really been able to play with it a whole lot, but I have two recommendations so far.
1. I would like to be able to sort parts by different categories like brand, color,or optical zoom range for optics. 2. I noticed that my browser would crash if I tried to do anything else when I had Gunstruction up. I'm not sure if it's possible, but it would be nice to have the tool not take up all the memory/space of the internet browser. It isn't really a big deal, but just something I noticed. Other than those two points, I haven't really had any other problems with it. It looks great guys and I can't wait for more updates. |
|
|
|
Posted: 8/6/2013 9:41:57 AM EDT
[#18]
Quote HistoryQuoted:
So far, I haven't really been able to play with it a whole lot, but I have two recommendations so far. 2. I noticed that my browser would crash if I tried to do anything else when I had Gunstruction up. I'm not sure if it's possible, but it would be nice to have the tool not take up all the memory/space of the internet browser. It isn't really a big deal, but just something I noticed. Can you send me your computer specs? PM would be fine or [email protected]. Processor, speed, ram, operating system, which version of your browser, etc. |
|
|
|
Posted: 8/6/2013 9:45:21 AM EDT
[#19]
Quote HistoryLooks badass! |
|
|
|
Posted: 8/6/2013 5:13:31 PM EDT
[#20]
I have a really hard time not using the UBR in my builds these days. Suppose I should buy one :)
|
|
|
|
Posted: 8/6/2013 5:14:16 PM EDT
[#21]
|
|
|
|
Posted: 8/6/2013 5:19:22 PM EDT
[#22]
http://i.imgur.com/8ZEgtno.png
|
|
|
|
Posted: 8/6/2013 10:04:43 PM EDT
[#23]
http://i824.photobucket.com/albums/zz162/GTP_AllenT2/ScreenShot2013-08-06at80003PM.png
This would be my choice for boarding a ship and eliminating pirates |
|
|
|
Posted: 8/7/2013 12:55:17 PM EDT
[#24]
Quote HistoryQuoted:
http://i824.photobucket.com/albums/zz162/GTP_AllenT2/ScreenShot2013-08-06at80003PM.png This would be my choice for boarding a ship and eliminating pirates Every time I see the lancer rails my wallet aches a little bit |
|
|
|
Posted: 8/7/2013 4:51:04 PM EDT
[#25]
Not enough SBR's up in here!
http://i.imgur.com/DsAJe76.png 
|
|
|
|
Posted: 8/7/2013 5:11:40 PM EDT
[#26]
*edited for offensiveness to the eyes
|
|
|
|
Posted: 8/7/2013 5:29:46 PM EDT
[#27]
|
|
|
|
Posted: 8/7/2013 11:43:39 PM EDT
[#28]
I can't wait to use this.
|
|
|
|
Posted: 8/8/2013 8:09:09 AM EDT
[#29]
I know I'm not supposed to be wishing my life away but September CAN'T get here fast enough. And I am SUPER stoked about the Ipad version.
|
|
|
|
Posted: 8/8/2013 11:58:39 AM EDT
[#30]
|
|
|
|
Posted: 8/8/2013 4:41:03 PM EDT
[#31]
Not much of a hunter, but...
|
|
|
|
Posted: 8/9/2013 5:14:05 PM EDT
[#32]
Just finished this one....
|
|
|
|
Posted: 8/9/2013 5:22:29 PM EDT
[#33]
|
|
|
|
Posted: 8/9/2013 5:34:01 PM EDT
[#34]
And for something simple and sexy...
|
|
|
|
Posted: 8/10/2013 3:45:54 AM EDT
[#35]
Quote HistoryQuoted:
I know I'm not supposed to be wishing my life away but September CAN'T get here fast enough. And I am SUPER stoked about the Ipad version. This! |
|
|
|
Posted: 8/10/2013 7:48:26 PM EDT
[#36]
|
|
|
|
Posted: 8/10/2013 10:14:20 PM EDT
[#37]
A quick question. Do they have the the PWS enhanced buffer tube as an option?
|
|
|
|
Posted: 8/11/2013 8:45:41 PM EDT
[#38]
Quote HistoryNo... Or should I say, not yet. There's a post in the gunstruction forum telling you which manufacturers are currently on board. I expect more will follow, but I don't speak for anyone, just my $.02.... |
|
|
|
Posted: 8/14/2013 7:31:00 AM EDT
[#39]
love it. glad i got in on the first run.
actual gun builder engine wise = still beta, obviously, but it does run and work very smooth. please give the option to easily remove or delete parts. also, couldn't find a "make a pic of this gun" option. part wise = the magpul FCS does not extend, but the builder lets it. small issue, yes, but just letting you know. |
|
|
|
Posted: 8/14/2013 8:22:01 AM EDT
[#40]
Quote HistoryQuoted:
No... Or should I say, not yet. There's a post in the gunstruction forum telling you which manufacturers are currently on board. I expect more will follow, but I don't speak for anyone, just my $.02.... Quote HistoryQuoted:
No... Or should I say, not yet. There's a post in the gunstruction forum telling you which manufacturers are currently on board. I expect more will follow, but I don't speak for anyone, just my $.02.... You got it, we will be opening GUNSTRUCTION up to anyone who is interested but for now we have parts only from the manufacturers listed. |
|
|
|
Posted: 8/14/2013 8:27:39 AM EDT
[#41]
Quote HistoryQuoted:
love it. glad i got in on the first run. actual gun builder engine wise = still beta, obviously, but it does run and work very smooth. please give the option to easily remove or delete parts. also, couldn't find a "make a pic of this gun" option. part wise = the magpul FCS does not extend, but the builder lets it. small issue, yes, but just letting you know. Thanks for the input! We have a photomode, and performance settings in the list for upcoming releases. The FCS is a good find, we are aware of it, but haven't had the time to fix certain "special case" parts. If you don't mind could you post your system specs so we could get a feel for where our baseline needs to be performance wise? When you mention removing parts do you mean essential parts for the gun (receiver, grip etc), or are you talking accessories (scopes, foregrips etc)? We have considered the "remove" option at a part category level, but weren't sure if it would be something people wanted. |
|
|
|
Posted: 8/14/2013 9:08:35 AM EDT
[#42]
Quote HistoryQuoted:
Thanks for the input! We have a photomode, and performance settings in the list for upcoming releases. The FCS is a good find, we are aware of it, but haven't had the time to fix certain "special case" parts. If you don't mind could you post your system specs so we could get a feel for where our baseline needs to be performance wise? When you mention removing parts do you mean essential parts for the gun (receiver, grip etc), or are you talking accessories (scopes, foregrips etc)? We have considered the "remove" option at a part category level, but weren't sure if it would be something people wanted. Quote HistoryQuoted:
Quoted:
love it. glad i got in on the first run. actual gun builder engine wise = still beta, obviously, but it does run and work very smooth. please give the option to easily remove or delete parts. also, couldn't find a "make a pic of this gun" option. part wise = the magpul FCS does not extend, but the builder lets it. small issue, yes, but just letting you know. Thanks for the input! We have a photomode, and performance settings in the list for upcoming releases. The FCS is a good find, we are aware of it, but haven't had the time to fix certain "special case" parts. If you don't mind could you post your system specs so we could get a feel for where our baseline needs to be performance wise? When you mention removing parts do you mean essential parts for the gun (receiver, grip etc), or are you talking accessories (scopes, foregrips etc)? We have considered the "remove" option at a part category level, but weren't sure if it would be something people wanted. system specs, not sure, i'm on my work computer lol. it's a newer all in one with a amd vision e1 processor. hp pavilion 20. on the removing parts, yea, i'd make it system-wide. just to keep it consistent and it felt like it should be there. i was slightly confused when building a stock. i started out with an a2 rifle setup and then went to a carbine and was worried it would try to apply two buffers. hard to explain, but just giving a remove button would clear any confusion. let me play with it some more and i'll get the hang of it. |
|
|
|
Posted: 8/16/2013 2:30:13 AM EDT
[#43]
Could I get in on this? I can test it on a few different pcs and browsers...
|
|
|
|
Posted: 8/16/2013 10:14:21 AM EDT
[#44]
So can I get authorized please? This looks awesome!
|
|
|
|
Posted: 8/16/2013 12:01:06 PM EDT
[#45]
Quote HistoryQuoted:
So can I get authorized please? This looks awesome! Anyone can get in the next round of invite, just post up here: http://www.ar15.com/forums/t_1_173/1509760_AUGUST_BETA_ACCESS_PASSES_SCHWAG_GIVEAWAY_.html We will be letting people in next week! |
|
|
|
Posted: 8/16/2013 8:35:53 PM EDT
[#46]
Needs at least a small warning that your gun contains parts making it an NFA weapon.
|
|
|
|
Posted: 8/17/2013 3:31:53 PM EDT
[#47]
Quote HistoryQuoted:
Needs at least a small warning that your gun contains parts making it an NFA weapon. Yeah we will be adding that in! We should be able to handle most cases of SBRs, AOW may be a little trickier. Eventually if/when we branch out to Ak's and HKs we hope to handle 922r as well. |
|
|
|
Posted: 8/19/2013 4:52:37 PM EDT
[#48]
Speaking of AOWs.....
|
|
|
|
Posted: 8/19/2013 9:37:56 PM EDT
[#49]
First of all, great work so far! I can already see my social life slipping away...
But I was just wondering if you guys are going to add rail segments? Like for the VTAC rails or the Geissele rails? It'd be nice to be able to put a foregrip on my baby  And I know this might be harder but maybe an option to cut up certain objects? Like for example the MagPul ladder rails? That way they can be modified to certain lengths instead of being kept the set length? Oh and you could never go wrong with more paint options.
Again, loving the builder. Keep up the great work guys!
|
|
|
|
Posted: 8/20/2013 2:32:14 AM EDT
[#50]
Almost an exact replica of my current stag set up. Only a few differences.
http://i.imgur.com/wwEmXl1.png |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
