I'm probably missing something but how do you remove the Daniel Defense pistol grip/trigger guard?  I don't want to damage it but I can't see how the trigger guard comes off.   Thanks

First, pop out the pistol grip cap from the bottom of the pistol grip.  It's either black or black with 'DD' logo.  A finger nail, tip of a bullet or flat tip screwdriver is sufficient.

Next, loosen and remove the silver flat tip screw and lock washer from inside the pistol grip.  You'll need a little longer than regular length flat tip screwdriver, ( a #3 should do ) to get down inside the depth of the pistol grip.  

Finally, with a very small Allen key, ( I don't recall the exact size right now since I'm on the road, but it's the second from the smallest in the average Allen key set you'd get from Lowe's, Home Depot, etc ) and gently unscrew the small Allen screw on the right side, forward end of the trigger guard.  

Of course, be mindful of the selector detent spring and selector detent as you remove the pistol grip from the lower receiver.  

Thank you. My eyes aren't what they once were and I couldn't see it it was a pin, screw, allen or what.

I'm surprised Daniel hasn't made a gen 2 grip yet. It needs to be bigger with a beaver tail and a better storage compartment and lid. Most people I know do not like the current one

I'm personally a fan. After handling a few DD rifles with the new grip installed at gun shops, I replaced the MIAD grip I put on my DDM4V1 (one of the originals with the Omega X rail). I can see how others would want the beavertail but I'm good with the current design. What I would like to see is a rubber slip on cheek rest/buffer tube cover for the Mk18 pistols shaped and textured like the cheek section of their stock.

Im a fan too...........tried the regular Magpul MOE, a Magpul K2, a Magpul MIAD, and a BCM mod 3............back to the Factory DD grip

Really, the storage lid is a bad design. And you must have some small hands to like that grip. K2 all day long !

I have large hands (where a L or XL shooting glove) and all my glocks run the large beavertail backstrap. I just like the way the DD grip feels in the hand vs the rough textured polymer of all the others (yes im aware they offer the rubberized + versions). Also like the smooth feel of the integrated trigger guard, vs the crack where a separate trigger guard / pistol grip mate up

Another vote for a beavertail on the grip.

And another...I switched mine out with a Magpul MOE.