Author
Message
ajroyer
Offline
Posts: 313
Feedback: 0% (0)
Posted: 5/19/2012 7:21:59 PM
Got my RRA NMA4 in today. Pretty dang excited about it. I just sighted it in for 200 yards and there are two local matches tomorrow, so all is right with the world. I had an experienced shooter at one of these matches give me a recipe for 52gr Sierra Matchking with Win 748. After shooting 55gr and 77gr bullets today (things I had on hand) I have high confidence in the 52gr performing very well.

First question to the forum: Does anyone have a recipe for 52gr Sierra Matchkings using 8208 XBR? What about with TAC? My gun is (NMA4) 20" bbl with 1:8 twist, and I am looking for a sweet spot to focus on when I work up my load (following Sierra's manual).

(I have 8208 and TAC on hand, so was hoping to get loads with those powders in addition to 748.)

Second question: I picked up a leather sling at the fun show today and it is raw leather. What oil or other substance do you all recommend as the best to condition, protect, and break in a new sling?

I may ask the reloading question in that forum, but I wanted to get input from high power shooters first. Any suggestions on what has worked for you all (or what to avoid) would be very helpful.
NotMrWizard
Offline
Posts: 1809
Feedback: 0% (0)
Link To This Post
Posted: 5/19/2012 9:49:49 PM
I've also got an RRA NM, and 52 SMK's and 26.8 grains of Re-15 truly give me 5 shots that create one ragged hole. It's the only load that I can get that small. I hear quite a bit about the 52's and 27 grains of Re-15, don't hear too much about any other powders with them.
PPCShooter1
Instructor
Offline
Posts: 633
Feedback: 100% (1)
Link To This Post
Posted: 5/20/2012 9:09:58 PM
John Feamster put his load in his book Black Magic. He used 25.0 gr of H-335 in LC case with Winchester primers seated to mag length. Feamster used that load in a benchrest match and fired a .231" group at 200 yards through a 26" Kreiger stainless barrel with 1/8 rifling.

Marty
uboat534
Member
Offline
Posts: 207
Feedback: 0% (0)
Link To This Post
Posted: 5/20/2012 9:36:20 PM
[Last Edit: 5/20/2012 9:39:28 PM by uboat534]
Welcome aboard to HP shooting! the 52s do well on the reduced courses. I use 26 grs varget over a remington br primer out of my white oak 1/7 A-4. I have a RR on back order just waiting.
"Now Im Tuggin On This Life But can Never Gain Any Ground And From The Selfishness Ive Displayed There Is A Punishment That I found"- Murder By Death
JoeMerc
Member
Offline
Posts: 84
Feedback: 0% (0)
Link To This Post
Posted: 6/1/2012 5:35:18 PM
26.5 gr W748, Win Brass, Rem 7 1/2 primer. 2.250" COAL. No crimp.
AR-180
Member
Offline
Posts: 6007
Feedback: 100% (1)
Link To This Post
Posted: 6/1/2012 5:53:12 PM
Originally Posted By JoeMerc:
26.5 gr W748, Win Brass, Rem 7 1/2 primer. 2.250" COAL. No crimp.


26.5 W748, LC brass, Wolf primers. Shoots knots.
Snafu12
Online
Posts: 864
Feedback: 100% (8)
Link To This Post
Posted: 6/1/2012 8:30:19 PM
[Last Edit: 6/1/2012 10:33:10 PM by Snafu12]
And nothing on the sling needed but time.
any treatment will do more harm than good
dnmccoy
Firefighter/Paramedic/Gun Enthusiast
NRA
Offline
Posts: 1556
Feedback: 100% (130)
Link To This Post
Posted: 6/1/2012 8:52:42 PM
At what distances are you shooting the 52's? Are they good enough for 300yrd work?
NRA Life Member
Garand Collectors Association Member
BlacksheepEG
Offline
Posts: 1036
Feedback: 100% (5)
Link To This Post
Posted: 6/1/2012 8:55:34 PM
I shoot the 52gr for reduced courses at 200 and 100 yards. I load them up with 24.0gr of RE-15 usually either in PMC brass or Sellier & Bellot.