User Panel
User Panel
User Panel
FL, USA
|
Posted: 1/31/2016 11:33:48 AM EDT
[Last Edit: BigWaylon]
Please provide other links to legit sites that sell solvent traps or whatever.
A list of the measured weights of various components is on the third post below. I can't vouch for any of these links myself, please chime in if any of these sites are sketchy http://diversifiedmachine.info Google the following to see info on DM options in antoehr forum: "These are some of the items you can get from Chris (Diversified Machine) via Email only" http://www.badgerridgeind.com/store/c1/Featured_Products.html http://www.preppersdiscount.com/store/c1/Featured_Products.html http://www.tycaindustries.com https://gunthreadadapters.com http://sdtacticalarms.com/Hardware_c_8.html https://www.amazon.com/s?marketplaceID=ATVPDKIKX0DER&me=A1C2TY5D2OQQCO&merchant=A1C2TY5D2OQQCO&redirect=true http://apogeeproducts.com/products?page=1 http://solvent-traps.com http://www.azpenngirl.com/#!freeze-plugs/c1yl4 https://zmachineworx.myshopify.com/ email: [email protected] (60 degree Ti Cones) Texas Arms Company custom 60* cones, radials, and Ks in 7075, 17-4, and Ti [email protected] Venom Machine, wide selection of 60*, radials, and Ks in 17-4 for B tubes, 1.375x1.259 DM tubes, Ti and Steel D tubes, and DM 1.5x1.375 tubes. [email protected] https://www.roninpro.com/collections/solvent-trap-parts. As of 5/26, they are only listing kits wholly made from 7075 aluminum, even the ones labeled "rifle kit." Prices are good though for simple stackable pistol can kits. Rusty's Services FFL 07/02 Custom solvent trap high quality Ti tubes most sizes and threads including 20, 24 ASR, custom adapters, proprietary design RSC cones SS & TI in 1.145, 1.255, 1.347, 1.355, 1.372, 1.497, 1.638. Also for big bore 450, 458 caliber in 1.497, 1.638. When clipped with DHC no poi shift related to bullet propgation through the can. Spacers for most tube size and custom lengths, Recores for F1 and commercial cans. OTB coming soon. Customer satisfaction guaranteed. Contact by email at [email protected]. Superprecisionconcepts.com -extremely lightweight titanium End caps and Griffin Adapters for the following sizes: 1.75 OD 24tpi (DM tubes); 1.625 OD 24tpi (DM tubes); 1.5 OD 24tpi (DM tubes); 1.5 OD 20tpi (D tube)(SDTA & Apogee tubes); 1.375 OD 24tpi (DM tubes); 'B' tube (SDTA) -End cap wrench for SPC & DM caps |
|
|
|
Posted: 1/31/2016 1:01:15 PM EDT
[#1]
|
|
|
|
FL, USA
|
Posted: 2/1/2016 4:28:35 PM EDT
[Last Edit: JSmithXYY]
[#2]
THIS POST IS FOR LISTING PARTS WEIGHTS:
Please provide weights in grams or hundredths of ounces and I will add them here so we can figure what the cans will weigh before hand. Please be sure to specify exactly which part, what size, whether for 1/2" or 5/8" etc, which option, part #s would be great. Thx Here is a chart frome another forum someone posted in another thread here: 
To get things started a couple of posters listed some weights only to tenths of ounces in another thread: Tubes: -SDTA 5.6" D size Ti tube at 4 oz (~.714 oz/inch) -SDT 8" D-size carbon steel tube: 10.45oz. -SDT B Size 5.6" TI tube, 4.58oz -SDT B Size 7.6" TI tube, 6.4oz Muzzle/Mount Adapters: -SD Tac Ti Griffin adapter: 1.9 oz. -DM Ti Griffin adapter: 1.4 -SDTAC D size titanium thread adapter for SDTAC brakes: 1.85oz. End Caps: -DM Ti D size: 1.0 -DM Al D size: .6 -SDT Al D size : 1.1 -SDT D size carbon steel endcap, undrilled: 2.60oz. -SDT Ti B tube endcap undrilled: 1.4 oz Spacer Material: -SDTAC 4" D size titanium spacer tube: 0.80oz. Cones/Freeze Plugs etc: |
|
|
|
Posted: 2/1/2016 4:32:51 PM EDT
[#3]
OST
|
|
|
|
|
Posted: 2/1/2016 4:44:31 PM EDT
[#4]
Quote HistoryOriginally Posted By JSmithXYY:
maybe also we could link here all the big form 1 suppressor threads. or maybe give F1's their own Subforum? 
|
|
|
|
|
Posted: 2/1/2016 4:54:19 PM EDT
[Last Edit: BigWaylon]
[#5]
Quote HistoryQuote HistoryOriginally Posted By ikickhippies:
Originally Posted By JSmithXYY:
maybe also we could link here all the big form 1 suppressor threads. or maybe give F1's their own Subforum? Wasn't going to bring it up. I thought people might be sick of my thread. |
|
|
|
|
Posted: 2/2/2016 3:33:05 PM EDT
[#6]
Quote HistoryOriginally Posted By goloud:
Wasn't going to bring it up. I thought people might be sick of my thread. Quote HistoryOriginally Posted By goloud:
Wasn't going to bring it up. I thought people might be sick of my thread. FWIW...I bumped it again yesterday, reminding Staff that SHOT had been over for more than a week, and that the natives were getting restless. 
|
|
|
|
|
Posted: 2/2/2016 3:38:38 PM EDT
[Last Edit: BigWaylon]
[#7]
Quote HistoryOriginally Posted By goloud:
Wasn't going to bring it up. I thought people might be sick of my thread. Quote HistoryOriginally Posted By goloud:
Originally Posted By ikickhippies:
Originally Posted By JSmithXYY:
maybe also we could link here all the big form 1 suppressor threads. or maybe give F1's their own Subforum? Wasn't going to bring it up. I thought people might be sick of my thread. I genuinely believe it to be a good idea. It's kind of a pain in the ass to track all those threads down when you need them. And the alternative of tacking all of them like the 20 tacked threads in the general class 3 forum is an even worse idea. Heck, maybe it will garner a little additional traffic and all that info won't be shoehorned into 100+ page threads. |
|
|
|
|
Posted: 2/2/2016 3:52:27 PM EDT
[Last Edit: BigWaylon]
[#8]
Quote HistoryOriginally Posted By ikickhippies:
I genuinely believe it to be a good idea. It's kind of a pain in the ass to track all those threads down when you need them. And the alternative of tacking all of them like the 20 tacked threads in the general class 3 forum is an even worse idea. Heck, maybe it will garner a little additional traffic and all that info won't be shoehorned into 100+ page threads. Quote HistoryOriginally Posted By ikickhippies:
Originally Posted By goloud:
Originally Posted By ikickhippies:
Originally Posted By JSmithXYY:
maybe also we could link here all the big form 1 suppressor threads. or maybe give F1's their own Subforum? Wasn't going to bring it up. I thought people might be sick of my thread. I genuinely believe it to be a good idea. It's kind of a pain in the ass to track all those threads down when you need them. And the alternative of tacking all of them like the 20 tacked threads in the general class 3 forum is an even worse idea. Heck, maybe it will garner a little additional traffic and all that info won't be shoehorned into 100+ page threads. Agreed. Industry Partners may have more pull in getting this done. Benefits them and us by carving it up. Just saying. OP. Sorry for the hijack. |
|
|
|
|
Posted: 2/3/2016 8:30:44 AM EDT
[#9]
Topic Moved
|
|
|
|
Posted: 2/3/2016 9:35:18 AM EDT
[#10]
Does anyone make a QD style endcap for these solvent traps or are they all threaded? I'd love one for my AAC FH.
|
|
|
|
|
Posted: 2/3/2016 9:42:29 AM EDT
[Last Edit: BigWaylon]
[#11]
Quote HistoryOriginally Posted By esa17:
Does anyone make a QD style endcap for these solvent traps or are they all threaded? I'd love one for my AAC FH. You can get threaded adapters to fit YHM and Griffin muzzle devices. The problem with AAC is the adapter has moving parts, so nobody's tackled that, yet. The current way to do it is buy the SilencerCo 51T MAAD mount (hopefully when it's on sale) and have a tube threaded to fit it. |
|
|
|
FL, USA
|
Posted: 2/3/2016 1:44:28 PM EDT
[Last Edit: JSmithXYY]
[#12]
^
Yeah, and the YHM mounts are cheap and also very quick on/off and can be used under a handguard, and would be very easy to make your own blast shields to put in place of your suppressor from the solvent trap parts sellers. I am wishing I hadn't gone w surefire more all the time... |
|
|
FL, USA
|
Posted: 2/3/2016 1:45:06 PM EDT
[#13]
Sweet, they made a F1 can forum!!
|
|
|
|
Posted: 2/3/2016 10:57:18 PM EDT
[#14]
Have 2 tubes from this outfit. Excellent comms and shipping. Tubes seem great so far they are well finished and machined still waiting on the F1s to come back so no true test yet.
Precision Products |
|
|
|
|
Posted: 2/4/2016 12:45:45 AM EDT
[#15]
Quote HistoryOriginally Posted By JSmithXYY:
^ Yeah, and the yum mount are cheap and also very quick on/off and can be used under a handguard, and would be very easy to make your own blast shields to put in place of your suppressor from the solvent trap parts sellers. I am wishing I hadn't gone w surefire more all the time... Having a hard time finding one in 7.62 in stock.. Any leads? |
|
|
|
FL, USA
|
Posted: 2/4/2016 11:09:52 AM EDT
[#16]
Quote HistoryOriginally Posted By SouthernBeau:
Have 2 tubes from this outfit. Excellent comms and shipping. Tubes seem great so far they are well finished and machined still waiting on the F1s to come back so no true test yet. Precision Products If its the same guy that was selling them on ebay out of Florida, then i have one as well. The c tube is a little on the thick side, but is made very well for the price. |
|
|
|
Posted: 2/4/2016 1:11:55 PM EDT
[#17]
Quote HistoryOriginally Posted By ucf_stang:
If its the same guy that was selling them on ebay out of Florida, then i have one as well. The c tube is a little on the thick side, but is made very well for the price. Quote HistoryOriginally Posted By ucf_stang:
Originally Posted By SouthernBeau:
Have 2 tubes from this outfit. Excellent comms and shipping. Tubes seem great so far they are well finished and machined still waiting on the F1s to come back so no true test yet. Precision Products If its the same guy that was selling them on ebay out of Florida, then i have one as well. The c tube is a little on the thick side, but is made very well for the price. Not sure where he's from but the guy I've talked to via email is Ken, and he's super fast to get back to you, answer questions, and ship items. |
|
|
|
VA, USA
|
Posted: 2/5/2016 3:47:09 PM EDT
[#18]
Quote HistoryOriginally Posted By SouthernBeau:
Not sure where he's from but the guy I've talked to via email is Ken, and he's super fast to get back to you, answer questions, and ship items. Quote HistoryOriginally Posted By SouthernBeau:
Originally Posted By ucf_stang:
Originally Posted By SouthernBeau:
Have 2 tubes from this outfit. Excellent comms and shipping. Tubes seem great so far they are well finished and machined still waiting on the F1s to come back so no true test yet. Precision Products If its the same guy that was selling them on ebay out of Florida, then i have one as well. The c tube is a little on the thick side, but is made very well for the price. Not sure where he's from but the guy I've talked to via email is Ken, and he's super fast to get back to you, answer questions, and ship items. |
|
|
AZ, USA
|
Posted: 2/6/2016 12:19:04 AM EDT
[#19]
Good thread. Thanks for this. There is a lot more available than I thought.
|
|
|
|
Posted: 2/6/2016 3:30:22 PM EDT
[#20]
Thanks!
|
|
|
|
|
Posted: 2/11/2016 10:59:13 AM EDT
[Last Edit: ssgjason]
[#21]
I think we need lists for the correct size valve spring retainers, too
|
|
|
|
|
Posted: 2/11/2016 11:16:22 AM EDT
[#22]
Quote HistoryOriginally Posted By ssgjason:
I think we need lists for the correct size valve spring retainers, too Goggle "Compendium of baffles" an arfcom member was keeping a list in google docs |
|
|
|
FL, USA
|
Posted: 2/15/2016 12:12:26 AM EDT
[Last Edit: JSmithXYY]
[#23]
Quote HistoryOriginally Posted By c5hardtop:
updated the OP Goggle "Compendium of baffles" an arfcom member was keeping a list in google docs Quote HistoryOriginally Posted By c5hardtop:
Originally Posted By ssgjason:
I think we need lists for the correct size valve spring retainers, too updated the OP Goggle "Compendium of baffles" an arfcom member was keeping a list in google docs yes, if htere was a google spreadsheet document or whatever w/ lists of proper freeze plugs or VSRs w/ specs and part numbers I would list that in the OP. I could not find this spreadsheet, just people talking about it in a few sites. if someone has a link to it and it is on antoher forum we are not supposed to link to please IM me. Thx |
|
|
|
Posted: 2/15/2016 12:34:11 AM EDT
[Last Edit: BigWaylon]
[#24]
Quote HistoryOriginally Posted By JSmithXYY:
yes, if htere was a google spreadsheet document or whatever w/ lists of proper freeze plugs or VSRs w/ specs and part numbers I would list that in the OP. I could not find this spreadsheet, just people talking about it in a few sites. if someone has a link to it and it is on antoher forum we are not supposed to link to please IM me. Quote HistoryOriginally Posted By JSmithXYY:
Originally Posted By c5hardtop:
Goggle "Compendium of baffles" an arfcom member was keeping a list in google docs yes, if htere was a google spreadsheet document or whatever w/ lists of proper freeze plugs or VSRs w/ specs and part numbers I would list that in the OP. I could not find this spreadsheet, just people talking about it in a few sites. if someone has a link to it and it is on antoher forum we are not supposed to link to please IM me. It's literally the first result that comes up. It's not a Google doc, but it's a big list. |
|
|
|
|
Posted: 2/15/2016 5:51:46 PM EDT
[Last Edit: BigWaylon]
[#25]
Originally Posted By JSmithXYY:
Maybe we shoudl make a thread listing all the places one can get parts to make Form 1 suppressors? Please provide other links to legit sites that sell solvent traps or whatever. I'm just trying to figure all this out. Here is what I have so far of places that seem legit. Pleaes reply w/ links to commonly used freeze plugs from auto parts suppliers or whatever. I'm probably going to do a couple form 1 cans and I'm trying to find all the places to get stuff. I can't vouch for any of these links myself, please chime in if any of these sites are sketchy http://diversifiedmachine.info http://www.badgerridgeind.com/store/c1/Featured_Products.html http://www.preppersdiscount.com/store/c1/Featured_Products.html http://www.tycaindustries.com https://gunthreadadapters.com http://sdtacticalarms.com/Hardware_c_8.html https://www.amazon.com/s?marketplaceID=ATVPDKIKX0DER&me=A1C2TY5D2OQQCO&merchant=A1C2TY5D2OQQCO&redirect=true http://apogeeproducts.com/products?page=1 http://solvent-traps.com The amazon link only send you to their site, not a specific link. However, thank you for the work you did linking other resources. https://www.amazon.com/s?marketplaceID=ATVPDKIKX0DER&me=A1C2TY5D2OQQCO&merchant=A1C2TY5D2OQQCO&redirect=true |
|
|
|
|
Posted: 2/22/2016 5:00:21 PM EDT
[#26]
Some amazing customer service! Ordered from
Badger Ridge Industries Saturday and it arrived today. Not too shabby! |
|
|
|
FL, USA
|
Posted: 2/25/2016 8:15:08 PM EDT
[Last Edit: BigWaylon]
[#27]
Quote HistoryOriginally Posted By DougR:
Some amazing customer service! Ordered from Badger Ridge Industries Saturday and it arrived today. Not too shabby! added, thx. those formed plugs look nice. So who has the lightest Ti Tubes?? Also, who can tell me how much SS or CS D size freeze plugs weigh?? Anyone have a source for 1.642"/41.7mm OD stainless Freeze plugs. This would fit a largst size DM tube. |
|
|
VA, USA
|
Posted: 2/27/2016 9:17:01 PM EDT
[#28]
|
|
|
VA, USA
|
Posted: 3/21/2016 9:13:03 AM EDT
[#29]
Stainless always weigh just a little less than their carbon steel equals... 10 Stainless D cell freeze plugs weigh just under 6.5 oz, where 10 carbon weigh around 7.5 oz
|
|
|
|
Posted: 4/3/2016 6:15:28 PM EDT
[Last Edit: BigWaylon]
[#30]
deleted...have to keep the for sale stuff in the EE
|
|
|
|
FL, USA
|
Posted: 4/4/2016 12:29:46 PM EDT
[#31]
^
Interesting sir, I have been looking for some 60 degree Ti stackable cones. Do they sort of snap together? Are the center marked? Are 60 degree cones good for pistol?? I am almost thinking about doing a form 1 45 can, but if it sounds like shit compared to my osprey it wouldn't be worth it... Anyway, I will update the OP soon guys. Thx for butin |
|
|
|
Posted: 4/4/2016 1:57:20 PM EDT
[Last Edit: pool_shark]
[#32]
https://zmachineworx.myshopify.com/
|
|
|
|
|
Posted: 4/9/2016 7:30:31 AM EDT
[Last Edit: BigWaylon]
[#33]
Quote HistoryOriginally Posted By pool_shark:
https://zmachineworx.myshopify.com/ Very nice quality products. Highly recommended. |
|
|
|
|
Posted: 4/13/2016 9:08:26 AM EDT
[Last Edit: November5]
[#34]
Texas Arms Company custom 60* cones, radials, and Ks in 7075, 17-4, and Ti
[email protected] Venom Machine, wide selection of 60*, radials, and Ks in 17-4 for B tubes, 1.375x1.259 DM tubes, Ti and Steel D tubes, and DM 1.5x1.375 tubes. [email protected] 
|
|
|
|
TX, USA
|
Posted: 4/13/2016 11:47:08 AM EDT
[#35]
Tagscribe.
|
|
|
OH, USA
|
Posted: 4/13/2016 2:45:10 PM EDT
[Last Edit: BigWaylon]
[#36]
Quote HistoryOriginally Posted By JoshAston:
Texas Arms Company custom 60* cones, radials, and Ks in 7075, 17-4, and Ti [email protected] Venom Machine, wide selection of 60*, radials, and Ks in 17-4 for B tubes, 1.375x1.259 DM tubes, Ti and Steel D tubes, and DM 1.5x1.375 tubes. [email protected] http://i733.photobucket.com/albums/ww337/joshua_aston/A5FBBB3C-1F89-4BE0-B873-D56D43203D56_zpsqln2t3cs.jpg http://i733.photobucket.com/albums/ww337/joshua_aston/40101778-9B0F-4FE9-9F83-F49EA9EB2C79_zpsickmxvzj.jpg http://i733.photobucket.com/albums/ww337/joshua_aston/78AEDB6C-36D9-41CB-9D57-665EBA69CB58_zpstgtymjbi.jpg Which company is the price list for? Texas Arms or Venom Macihne? |
|
|
|
Posted: 4/13/2016 3:43:24 PM EDT
[Last Edit: BigWaylon]
[#37]
Quote HistoryOriginally Posted By willyc7777:
Which company is the price list for? Texas Arms or Venom Machine? Venom. I've got an order in with Texas Arms as of last week, they quoted two weeks so I should be seeing it next week. Other than that I have no experience with either company. |
|
|
|
|
Posted: 4/13/2016 6:38:39 PM EDT
[Last Edit: BigWaylon]
[#38]
Quote HistoryOriginally Posted By flashbag:
Very nice quality products. Highly recommended. Quote HistoryOriginally Posted By flashbag:
Originally Posted By pool_shark:
https://zmachineworx.myshopify.com/ Very nice quality products. Highly recommended. I just noticed earlier today that they have opened Pre-Ordering on the website for the Ti 60 Cones for the SDTac D Tubes. I missed out on his first run so I just placed my order. Supposed to ship on or around 4/30, so 2 weeks. https://zmachineworx.myshopify.com/ |
|
|
|
|
Posted: 4/14/2016 1:30:58 PM EDT
[#39]
Are the zmachine cones solution annealed, or h900?
|
|
|
|
|
Posted: 4/19/2016 11:14:43 AM EDT
[#40]
Tag
|
|
|
|
|
Posted: 4/30/2016 10:27:12 PM EDT
[#41]
Quote HistoryOriginally Posted By JoshAston:
Texas Arms Company custom 60* cones, radials, and Ks in 7075, 17-4, and Ti [email protected] Venom Machine, wide selection of 60*, radials, and Ks in 17-4 for B tubes, 1.375x1.259 DM tubes, Ti and Steel D tubes, and DM 1.5x1.375 tubes. [email protected] http://i733.photobucket.com/albums/ww337/joshua_aston/A5FBBB3C-1F89-4BE0-B873-D56D43203D56_zpsqln2t3cs.jpg http://i733.photobucket.com/albums/ww337/joshua_aston/40101778-9B0F-4FE9-9F83-F49EA9EB2C79_zpsickmxvzj.jpg http://i733.photobucket.com/albums/ww337/joshua_aston/78AEDB6C-36D9-41CB-9D57-665EBA69CB58_zpstgtymjbi.jpg what difference does the shape make? also thank you for the listings. |
|
|
|
|
Posted: 5/7/2016 10:44:46 PM EDT
[#42]
Those pre-formed cups are pretty nifty, but they start seriously eating into the cost saving of a DIY suppressor. From the sound of it, that may not make a difference if people are buying them all.
|
|
|
|
|
Posted: 5/7/2016 10:48:16 PM EDT
[#43]
Quote HistoryOriginally Posted By HALFNATTYGAINZ:
what difference does the shape make? also thank you for the listings. Ks are best for subs, they don't work well with supers. Ks are also harder to finish up. I'd recommend radials fit a pistol and either cones or radials for rifles. |
|
|
|
|
Posted: 5/8/2016 2:33:40 PM EDT
[#44]
|
|
|
|
TX, USA
|
Posted: 5/20/2016 6:00:32 PM EDT
[#45]
I've been browsing this forum for about a day, but it seems like DM is the only one that makes a product that would look like a professional looking commercial can. Everyone else's products look like a flashlight.
Hope I'm not starting a flame war with this, but that's just the way it looks to a F1 newcomer. |
|
|
VA, USA
|
Posted: 5/20/2016 7:59:56 PM EDT
[#46]
Quote HistoryOriginally Posted By Zhukov:
Those pre-formed cups are pretty nifty, but they start seriously eating into the cost saving of a DIY suppressor. From the sound of it, that may not make a difference if people are buying them all. Yep, I was looking at the cost of a pistol can, and I'd be just shy of an Octane or Revolution. It'd be nowhere near that finished quality either. So I'm just going to wait till after 41F buying surge dies down and get a F4 can at a good discount. |
|
|
|
Posted: 5/21/2016 12:24:09 PM EDT
[Last Edit: BigWaylon]
[#47]
Quote HistoryOriginally Posted By ar15eric:
I've been browsing this forum for about a day, but it seems like DM is the only one that makes a product that would look like a professional looking commercial can. Everyone else's products look like a flashlight. Hope I'm not starting a flame war with this, but that's just the way it looks to a F1 newcomer. You clearly have not done enough web searching, OR reading, there's a few places that have nice looking solvent traps. |
|
|
|
TX, USA
|
Posted: 5/21/2016 12:35:38 PM EDT
[#48]
Quote HistoryOriginally Posted By jim:
You clearly have not done enough web searching, OR reading, there's a few places that have nice looking solvent traps. Quote HistoryOriginally Posted By jim:
Originally Posted By ar15eric:
I've been browsing this forum for about a day, but it seems like DM is the only one that makes a product that would look like a professional looking commercial can. Everyone else's products look like a flashlight. Hope I'm not starting a flame war with this, but that's just the way it looks to a F1 newcomer. You clearly have not done enough web searching, OR reading, there's a few places that have nice looking solvent traps. I've read this post and looked at every one of the links. If you know of more, please add them to the list. |
|
|
FL, USA
|
Posted: 5/26/2016 11:22:09 PM EDT
[Last Edit: BigWaylon]
[#49]
Quote HistoryI'll add it w a note that their "rifle kits" are 100% made of 7075, tubes, adapters and end caps, cups, everything 
I don't see a single thing on the site in steel or Ti Market really has blown up since a yr ago when SDT, DM and eBay stackable cups sellers were the only game in town. |
|
|
AR, USA
|
Posted: 6/4/2016 5:55:53 PM EDT
[#50]
any further inputs about Texasarmsco or venonmachine?
|
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
