Talk about a late bloomer
I had a bb gun by age 8 and a 22 at 10.
So I do not own a ruger like yours, have an older ruger bolt gun in 300WM. All I do for cleaning is remove the bolt, not sure how yours come out, and wipe it down, then leave a VERY thin( think rag with a few drops ) film of oil on it.
Using a 30 cal bore brush coated with your clp/hoppes/bore cleaner, from the chamber, scrub the bore . I usually do 15-20 passes. You are trying to get any copper fouling out, I have not had a problem with that in my 30-06.
then swap tips on the rod, with either a proper jag, or the slotted tip and push patches thru till they are clean. Then I clean the chamber with a GI toothbrush and patches. One more patch down the bore with a couple drops of CLP or oil. Pretty much just wipe out the action with a rag and a bit of CLP, leave a fine film of oil on the bolt lug area.
Put your scope caps on to keep any crap off the lens. Do not go overboard on lube on the bolt or receiver, that will accumulate over time and can cause problems in cold weather.
I never tear down my bolt or pull the action from the stock.