User Panel
User Panel
User Panel
|
Posted: 4/26/2015 2:57:34 AM EDT
Still gathering parts but I want to file and get it started...have the lower...
I want to run a LWRC ultra compact stock setup/receiver extension kit and vltor mur with a 5.25 or 5.5" qc10 9mm barrel...I just want to get the hard part out of the way while I gather the stock and parts. Anyone have the overall length with that stock setup? I plan to run a suppressed Sico Octane 9 and run a seekins bar rail. Do I need to be exact? First time e-filing. I have my trust all setup.. Already ordered the octane through silencershop. Thanks 
|
|
|
|
Posted: 4/26/2015 7:36:45 AM EDT
[#1]
Doesn't have to be exact, just get close. We expect pics.
|
|
|
|
Posted: 4/26/2015 9:31:29 AM EDT
[#2]
The octanes outer diameter is quite wider than some other suppressors, not saying it won't fit but when I used to use my ti-rant suppressor it was scratch my suppressor inside my Samson Evo rail. But I switched to a AAC Evo suppressor and its slides in easy. Also added a 3 lug adaptor to make it even easier on and off.
Btw I have a similar set up, a ddles lower with 5.5 inch barrel suppressed under than handguard. But have a standard magpul stock 
here's mine with out the suppressor |
|
|
|
Posted: 4/26/2015 5:30:15 PM EDT
[#3]
Quote HistoryQuoted:
Doesn't have to be exact, just get close. We expect pics. Thanks guys... I don't have a starting point...Anyway someone could get me somewhat started? |
|
|
|
Posted: 4/26/2015 5:32:40 PM EDT
[#4]
Quote HistoryQuoted:
The octanes outer diameter is quite wider than some other suppressors, not saying it won't fit but when I used to use my ti-rant suppressor it was scratch my suppressor inside my Samson Evo rail. But I switched to a AAC Evo suppressor and its slides in easy. Also added a 3 lug adaptor to make it even easier on and off. Btw I have a similar set up, a ddles lower with 5.5 inch barrel suppressed under than handguard. But have a standard magpul stock http://i9.photobucket.com/albums/a72/disgookonfiya/70756A38-0708-4EA5-B6F2-FDF56C355525_zpsefe6cbqm.jpg here's mine with out the suppressor Thanks for the input. I am going to use a BAR rail which has the ID at 1.8" The octane diameter is listed as 1.37" Which barrel are you using? The QC? |
|
|
|
Posted: 4/27/2015 3:09:42 PM EDT
[#5]
I'm using a 5.5 inch bbl from Adco. Haven't had a single problem with it in 500 or so rounds.....And I don't seem to have any pics handy.
|
|
|
|
Posted: 4/27/2015 4:28:05 PM EDT
[#6]
Quote HistoryQuoted:
I'm using a 5.5 inch bbl from Adco. Haven't had a single problem with it in 500 or so rounds.....And I don't seem to have any pics handy. Threaded or 3 lug? What threads if threaded? |
|
|
|
Posted: 4/27/2015 6:32:40 PM EDT
[#7]
Doesn't that compact stock use a proprietary buffer? Will that work with a 9mm buffer.
|
|
|
|
Posted: 4/27/2015 6:52:57 PM EDT
[#8]
Something like this......
|
|
|
|
Posted: 4/27/2015 9:03:04 PM EDT
[#9]
|
|
|
|
Posted: 4/27/2015 9:44:33 PM EDT
[#10]
Quote HistoryQuoted:
Something like this...... <a href="http://s601.photobucket.com/user/n_parker_2009/media/DSC_0307.jpg.html" target="_blank">http://i601.photobucket.com/albums/tt91/n_parker_2009/DSC_0307.jpg</a> Details on that barrel and handguard length!? :D |
|
|
|
Posted: 4/27/2015 10:12:27 PM EDT
[#11]
Quote HistoryQuoted:
Details on that barrel and handguard length!? :D Quote HistoryQuoted:
Quoted:
Something like this...... <a href="http://s601.photobucket.com/user/n_parker_2009/media/DSC_0307.jpg.html" target="_blank">http://i601.photobucket.com/albums/tt91/n_parker_2009/DSC_0307.jpg</a> Details on that barrel and handguard length!? :D It's an old rifle... so from what I remember either 5 or 5.5 inch barrel, tros 3 lug adaptor, with a samson evo rail, I'll measure it for you later. |
|
|
|
Posted: 4/27/2015 10:38:45 PM EDT
[#12]
Quote HistoryQuoted:
Doesn't that compact stock use a proprietary buffer? Will that work with a 9mm buffer. It does come with the stock kit. Also, slash makes a heavy buffer specific to the stock/tube |
|
|
|
Posted: 4/27/2015 10:50:57 PM EDT
[#13]
Quote HistoryQuoted:
Doesn't that compact stock use a proprietary buffer? Will that work with a 9mm buffer. More info in this thread: http://www.ar15.com/forums/t_3_15/673058_LWRC_Ultra_Compact_Users___What_Buffer_are_you_using___UPDATE.html |
|
|
|
Posted: 4/28/2015 4:29:38 AM EDT
[#14]
Quote HistoryQuoted:
Threaded or 3 lug? What threads if threaded? Quote HistoryQuoted:
Quoted:
I'm using a 5.5 inch bbl from Adco. Haven't had a single problem with it in 500 or so rounds.....And I don't seem to have any pics handy. Threaded or 3 lug? What threads if threaded? M13.5 left hand threads. I've only shot it to 30 yards but standing off hand Im able to keep my shots on an 8inch target with MBUS sites. I'm not a very good shot either. |
|
|
|
Posted: 4/28/2015 5:46:14 PM EDT
[#15]
Should I stick with threaded? or try going 3 lug?!
|
|
|
|
Posted: 4/28/2015 5:55:24 PM EDT
[#16]
Quote HistoryQuoted:
Should I stick with threaded? or try going 3 lug?! It just depends on your preference. I wanted a qd that I could take on and off even under a rail and already have a mp5 in the works so a 3-lug was a no brainer. |
|
|
|
Posted: 4/28/2015 7:54:02 PM EDT
[#17]
Quote HistoryQuoted:
Details on that barrel and handguard length!? :D Quote HistoryQuoted:
Quoted:
Something like this...... <a href="http://s601.photobucket.com/user/n_parker_2009/media/DSC_0307.jpg.html" target="_blank">http://i601.photobucket.com/albums/tt91/n_parker_2009/DSC_0307.jpg</a> Details on that barrel and handguard length!? :D Tros 5" three lug barrel Lancer carbon fiber handguard 7.2" long Octane 9 HD with 3 lug adapter |
|
|
|
Posted: 4/28/2015 8:41:00 PM EDT
[#18]
FYI - I'm running an Octane 45 under a Seekins SAR in case you want to go with a thinner profile handguard. The BAR is nice but too thick for my taste.
|
|
|
|
Posted: 4/28/2015 9:17:37 PM EDT
[#19]
Quote HistoryQuoted:
Tros 5" three lug barrel Lancer carbon fiber handguard 7.2" long Octane 9 HD with 3 lug adapter Quote HistoryQuoted:
Quoted:
Quoted:
Something like this...... <a href="http://s601.photobucket.com/user/n_parker_2009/media/DSC_0307.jpg.html" target="_blank">http://i601.photobucket.com/albums/tt91/n_parker_2009/DSC_0307.jpg</a> Details on that barrel and handguard length!? :D Tros 5" three lug barrel Lancer carbon fiber handguard 7.2" long Octane 9 HD with 3 lug adapter I think I might just have to go the 3 lug route! Too bad TROS is 10-12 weeks out! |
|
|
|
Posted: 4/28/2015 11:29:26 PM EDT
[#20]
Mine is threaded 1/2x28, and I added a TROS 3 lug adaptor to it, set with rocksett. I originally had mine set up so I can thread it on directly, but it's hard to get the thread started sometimes, it's possible the suppressor can loosen up, and I was scratching the crap out of my suppressor on the sides. Plus since it was so short, I literally had only ~2 inches to grip on a hot suppressor when trying to remove it. Now, I just press down and do a 1/3 twist and its off. It added a little length to the over all length though..
|
|
|
|
Posted: 4/29/2015 12:26:03 AM EDT
[#21]
Quote HistoryQuoted:
Mine is threaded 1/2x28, and I added a TROS 3 lug adaptor to it, set with rocksett. I originally had mine set up so I can thread it on directly, but it's hard to get the thread started sometimes, it's possible the suppressor can loosen up, and I was scratching the crap out of my suppressor on the sides. Plus since it was so short, I literally had only ~2 inches to grip on a hot suppressor when trying to remove it. Now, I just press down and do a 1/3 twist and its off. It added a little length to the over all length though.. Very valid point. |
|
|
Win a FREE Membership!
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.
