User Panel
Posted: 7/29/2015 6:45:46 PM EDT
I can't seem to find one locally to examine thanks for taking the time does the rossi 92 have the "lever saftey " where you must squeeze the lever to fire the rifle does the top mounted saftey get in the way or is it executed nicely. How long is the lever cycle ? over all what do you think of it? |
|
Hi, as in like using a Marlin then no, you don't have to squeeze the lever up to fire it.
Nope, the top mounted safety doesn't get in the way but it is kinda ugly. Lots of people get rid of them. 92's are design for short cartridges so the throw is short as compared to a full length like in a Marlin 336. It's an okay, fun little thing. I have used it one hand and did pretty good as it is small (short may be a better term). I've changed mine some with Steves rear fold down buckhorn and front bead sight. I wanted to put on a tang rear, which I did, Marbles, but as the rear didn't fold down it kind of was in the way. I wanted the tang for long shots like out to 125 yards but wanted the buckhorn for quick pick-ups, close in. As for accuracy, expect the usual good enough to hunt with poa, poi that levers have. The esthetics are fine for the money. The fit and finish are good on mine and I do have some decent grains in the wood but not even close to the level of my JM's Walnut. The receiver is very strong and is the same used all the way up to their 454 cas. I got it as a companion to my 686 and for that its fine. It is ideal for a camp gun or pack rifle. I have a shoulder scabbard that fits it nicely. Don't even notice it. Not that it's in my needs but it would also make an ideal trunk gun. No magazines or tube feeding to fumble with, self contained, top off on the fly and really doesn't cause so much as a second glance vs an AK or AR. Cheap enough were you won't get dusty eyes when it gets a ding. My action is pretty smooth but it was a bit rough, like all my others, at first. With levers, first thing I do is give them a really good cleaning and lube. Second thing I do is put on a shooting glove (Only ones I wear shooting gloves for are levers, wears on the back of my hand) put on the tube and throw it a couple thousand times. Smooths out the action a lot. |
|
Quoted:
Hi, as in like using a Marlin then no, you don't have to squeeze the lever up to fire it. Nope, the top mounted safety doesn't get in the way but it is kinda ugly. Lots of people get rid of them. 92's are design for short cartridges so the throw is short as compared to a full length like in a Marlin 336. It's an okay, fun little thing. I have used it one hand and did pretty good as it is small (short may be a better term). I've changed mine some with Steves rear fold down buckhorn and front bead sight. I wanted to put on a tang rear, which I did, Marbles, but as the rear didn't fold down it kind of was in the way. I wanted the tang for long shots like out to 125 yards but wanted the buckhorn for quick pick-ups, close in. As for accuracy, expect the usual good enough to hunt with poa, poi that levers have. The esthetics are fine for the money. The fit and finish are good on mine and I do have some decent grains in the wood but not even close to the level of my JM's Walnut. The receiver is very strong and is the same used all the way up to their 454 cas. I got it as a companion to my 686 and for that its fine. It is ideal for a camp gun or pack rifle. I have a shoulder scabbard that fits it nicely. Don't even notice it. Not that it's in my needs but it would also make an ideal trunk gun. No magazines or tube feeding to fumble with, self contained, top off on the fly and really doesn't cause so much as a second glance vs an AK or AR. Cheap enough were you won't get dusty eyes when it gets a ding. My action is pretty smooth but it was a bit rough, like all my others, at first. With levers, first thing I do is give them a really good cleaning and lube. Second thing I do is put on a shooting glove (Only ones I wear shooting gloves for are levers, wears on the back of my hand) put on the tube and throw it a couple thousand times. Smooths out the action a lot. View Quote that's awesome thanks |
|
What Taipan said. I'll add that I have 2 stainless trappers, a 357 and a 44. Both have been to Steve Young for an action job and removal of that stupid safety. I have or have had several other 357, 44 and 45 leverguns. Including Brownings and Marlins, the little Rossi's outshoot all of them. John Browning designed a real winner in the model 92.
|
|
I was for some reason expecting rossi to get flamed, I am ecstatic to see 2 positive reviews/comments I may have to pick up a 16" if I can find one.
|
|
Just picked one up...had it out once.
First lever gun. I like it. I found one with the built in rail on it. Threw a red dot on it and I don't need my f'in readers to shoot it. Show up Friday night and you can try it out. |
|
I got one off the EE this year.
Only shot it twice and its gtg. It's a very fun gun to shoot! |
|
All I shoot in mine is 38 specials and it like shooting a loud 22.
|
|
The top safety is not well executed. It doesn't fit very well so it can be accidentally activated or deactivated but it can also stick and be difficult to intentionally rotate. You can either remove it and leave a hole, fill the hole with a blank plug, or replace it with an aperture sight. I think I'll probably do the latter for my wife's rifle.
Overall, it's a fantastic rifle for the money. Better trigger than the Marlin, too. Here's a review I wrote about it |
|
Quoted:
Just picked one up...had it out once. First lever gun. I like it. I found one with the built in rail on it. Threw a red dot on it and I don't need my f'in readers to shoot it. Show up Friday night and you can try it out. View Quote I'll be there fri I was planning on bringing my 686s any way, a chance to shoot a 92 will be awesome. . thanks. |
|
Quoted:
Love mine. I have blued 16-inchers in .357 and .44, and 20" stainless in .454 Casull. Only complaints were that both of the short guns tended to shoot high even with the rear elevator all the way down. Modified the elevator a little on the .44, put a scout-mounted dot on the .357, and all is good with the world. http://i51.photobucket.com/albums/f360/quake316/LE/leverguns-edited.jpg One caution - the .454 uses a dual-tube magazine tube much like a typical .22 rimfire does, so with the .45-caliber rounds inside, it's fairly large in diameter. To get a sling mount, I had to use one intended for a 16-gauge shotgun: http://i51.photobucket.com/albums/f360/quake316/LE/Photo0913.jpg View Quote Where did you get that scope rail ? is it one you had to drill & tap the bbl, or a dovetail replacement one? Appreciate the info |
|
Quoted:Where did you get that scope rail ? is it one you had to drill & tap the bbl, or a dovetail replacement one? Appreciate the info View Quote It was a factory-available item that mounted (partially) using the rear sight's mounting holes, but I believe it's been discontinued for several years now. Might google up "puma rifle scout mount" or such; no idea if anyone currently makes one for them. |
|
Rossi is the only one that makes the scout scope rail that properly fits the 92 that I've seen the rossi part number is P892 careful on ebay as some try to pawn off the weaver rail as it fits the r92 it does not. If you pull your rear sight ramp out from the blade you should see the factory drilled holes for scope rail. All newer 92 I have seen have been drilled and tapped at factory. You tap out rear sight assembly from its dovetail, and attach the rail if you can find one and your gtg.
Check out rossirifleman.com , I'm a mod there and you can find out almost anything you could ever want to know on Rossi there. I know rossi usa just had some come into the country but they sold out like in an hour after they were listed. To many are in need of the mount on their rossi 92 rifles. R92 rifles are no longer a secret anymore. Good luck on your search for your rail. |
|
Quoted:
The top safety is not well executed. It doesn't fit very well so it can be accidentally activated or deactivated but it can also stick and be difficult to intentionally rotate. You can either remove it and leave a hole, fill the hole with a blank plug, or replace it with an aperture sight. I think I'll probably do the latter for my wife's rifle. Overall, it's a fantastic rifle for the money. Better trigger than the Marlin, too. Here's a review I wrote about it View Quote You can remove the safety and install Steve's blanking plug in less than one minute |
|
I replaced the ejector spring which improved feeding.
Flattened the buckhorn on the rear sight. Fixed the stock crack under the grip tang. Eventually I'll replace the plastic follower and the manual safety. Maybe add some oil to the wood. Probably take it deer hunting this year once I figure out a good 180gr load for it. |
|
Quoted:
All I shoot in mine is 38 specials and it like shooting a loud 22. View Quote Fun times. Warning mines was rough and didn't feed for crap. I'm handy and polished the chamber, contoured the nonexistent feedramp and cleaned up the action. Thing is super smooth and feeds everything. Sad my kids don't like it and I really don't shoot it. |
|
Mine is the 16", blued version. Haven't had any issues with either .38 Specials or .357 Mag, nor have I made any modifications yet. I've been looking at the Skinner peep sight to replace the buckhorn. It is a fun rifle to shoot.
|
|
I have the stainless 16" 357. I took out the safety and replaced it with a peep the drifted out the rear sight and put in a stainless blank. I cast 158swc and use whatever pistol powder I have laying around to load 38s and 357s. My kids got me the molle scabbard with the built in machete. Quite possibly the funnest gun I own.
I had my first malfunction ever yesterday though. A 38 is stuck in the magazine as I type this so we had to top load it single shot. Just haven't had a minute to pull it apart. |
|
I have the stainless 16" 357. I took out the safety and replaced it with a peep the drifted out the rear sight and put in a stainless blank. I cast 158swc and use whatever pistol powder I have laying around to load 38s and 357s. My kids got me the molle scabbard with the built in machete. Quite possibly the funnest gun I own.
I had my first malfunction ever yesterday though. A 38 is stuck in the magazine as I type this so we had to top load it single shot. Just haven't had a minute to pull it apart. |
|
I really wish they were easier to find. I'd love to have a 20 inch to go with my trapper.
|
|
Quoted:
I really wish they were easier to find. I'd love to have a 20 inch to go with my trapper. View Quote http://tooeleshootingsupply.com/shop/rossi-r92-56001-357-mag-rifle-with-20-blued-round-barrel/ |
|
The majority of feeding issues are because the ejector spring is too stiff.
It is supposed to retract into the bolt as the rounds are chambered. If it doesn't it creates a "hard spot" in the feed geometry resulting in a jam. |
|
Quoted:
This is my pair, I haven't hunted with the 357 (yet). But I have popped a couple of hogs with the 44, they were both DRT. This reminds me, I need to do a refinish on the stocks, they put a very basic finish on them from the factory. http://www.hunt101.com/data/500/P1020537.JPG View Quote View All Quotes View All Quotes Quoted:
Quoted:
I was for some reason expecting rossi to get flamed, I am ecstatic to see 2 positive reviews/comments I may have to pick up a 16" if I can find one. This is my pair, I haven't hunted with the 357 (yet). But I have popped a couple of hogs with the 44, they were both DRT. This reminds me, I need to do a refinish on the stocks, they put a very basic finish on them from the factory. http://www.hunt101.com/data/500/P1020537.JPG My stainless Rossi has very light, almost blonde wood. I have had three others and all of them work very well. The stainless is smooth enough that it doesn't need any break in or polishing. |
|
|
|
Quoted:
This is my .357 Mag Rossi. It's actually my favorite rifle. It's short, light, compact, a great all around gun. https://lh3.googleusercontent.com/-zIdyKIRVxfQ/VdeHA3ZXeDI/AAAAAAAACLo/FM91MeSBw_k/s640-Ic42/image.jpg View Quote Very nice, where did you get the sling and all? |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.