Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 2/7/2017 6:34:42 AM EDT
Link Posted: 2/7/2017 2:45:11 PM EDT
is that made by Keltec? It looks significantly better than the regular one.
Link Posted: 2/7/2017 7:34:41 PM EDT
This has just turned the RDB into something I'm moderately interested in.
Link Posted: 2/7/2017 8:15:05 PM EDT
Wish RFB owners could get some M-Lok love...
Link Posted: 2/7/2017 8:16:59 PM EDT
Looking at it again (assuming it's metal of some kind) I would worry about heat build up from where the piston comes back and from the barrel. It looks well ventilated though but I did burn my girlish hands on the handguard takedown pin on my RDB while I was doing some T&E with it. Oh also did anyone see the adjustable LOP stock on the survival model? I liked that too.
Link Posted: 2/7/2017 9:26:38 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Aeneas2020:
It looks significantly better than the regular one.
View Quote


Yes it does.
Link Posted: 2/8/2017 12:20:40 AM EDT
As stated already, I concur that the new handguard looks much nicer than the original stock. I do have one question though, is this new handguard free-floated?
Link Posted: 2/8/2017 2:56:41 AM EDT
doubtful looks like the pin is still there (under the gas block)
Link Posted: 2/8/2017 9:21:08 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By cubanb:
doubtful looks like the pin is still there (under the gas block)
View Quote
That's unfortunate as most complaints are that pin getting hot and no ever says, 'I just un-freefloated my rifle this weekend as it was too accurate'. For those of you that own the RDB, does it appear if there's a possibility of designing a handguard that fully locks into the reciver so that cross pin in the gas block could be eliminated?
Link Posted: 2/8/2017 11:48:48 PM EDT
Do want that handguard, and a mod to free float. But I'd settle for that hg and the brass catcher.
Link Posted: 2/16/2017 3:26:47 PM EDT
[Last Edit: 2/16/2017 3:27:26 PM EDT by Brutus2]
How difference is a free floated barrel/gastube/piston assembly going to make?...besides not burning your fingers if you forget about the pin
Link Posted: 2/17/2017 10:28:39 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By Brutus2:
How difference is a free floated barrel/gastube/piston assembly going to make?...besides not burning your fingers if you forget about the pin
View Quote
I'm not sure if you're being sarcastic or not, but I'm going to assume it's a legit question. Any time you put pressure on a barrel you can effect the harmonics, if that pressure is not identical every time you will effect accuracy. Whether it's a bolt action rifle or AR, if the barrel is free floated the harmonics after the shot will be unimpeded resulting in repeatable accuracy. With the current config of the RDB, you're constantly putting pressure on the barrel via the handguard pin through the gas block resulting in possible different pressures.
Link Posted: 2/17/2017 11:20:36 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By kfeltenberger:
This has just turned the RDB into something I'm moderately interested in.
View Quote



Ditto.
Link Posted: 2/26/2017 12:25:38 AM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By NinjaZX6R:
I'm not sure if you're being sarcastic or not, but I'm going to assume it's a legit question. Any time you put pressure on a barrel you can effect the harmonics, if that pressure is not identical every time you will effect accuracy. Whether it's a bolt action rifle or AR, if the barrel is free floated the harmonics after the shot will be unimpeded resulting in repeatable accuracy. With the current config of the RDB, you're constantly putting pressure on the barrel via the handguard pin through the gas block resulting in possible different pressures.
View Quote
I have found that when shooting for accuracy with the RDB....not allowing anything to touch the handguard tightens up groups.....but even shooting it conventionally, it's accurate to just over 2moa....so for an off the rack semi auto..that's about right
Link Posted: 2/26/2017 11:41:45 PM EDT
Mine is 1.5 moa with decent 62-64 duty ammo, cheapo gt ammo is,like 3". Once i figured out the gas system, mine is super reliable and pretty darn accurate. Ive put over 3k through mine probably 2k of steel cased ammo. It runs it all perfectly. Great rifle!
Link Posted: 3/24/2017 2:00:21 PM EDT
Any more info on this?
Link Posted: 4/1/2017 9:59:39 PM EDT
[Last Edit: 4/1/2017 10:00:35 PM EDT by bbqncigars]
I had a limited time to sight in a leftover scope to try some load development today. A 24.5gr of Varget behind a Hornady 75gr BTHP in virgin Federal brass shows promise. The first four rounds were inside a 1.5" circle at 100yds until the brake on the neighbors baby cannon blasted me on the fifth shot. The results are gratifying considering shimming will be needed to zero the scope to the pup. POA was 9.5" left with maxed windage adjustment. FWIW, the scope is a Millett 6x25x56AO that dwarfs the pup.
Link Posted: 7/26/2017 9:54:07 AM EDT
Anyone heard anything new on the release of the M-lok handguard ??
Link Posted: 7/26/2017 1:18:50 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By ARguy:
Anyone heard anything new on the release of the M-lok handguard ??
View Quote
A third party mfg is going to be making one. Look over on bullpup forum there was a thread on it. He just had the rapid prototype done
Link Posted: 7/26/2017 8:27:23 PM EDT
[Last Edit: 7/26/2017 8:30:12 PM EDT by MDStroup]
I am liking this new handguard. But i do really like the look of the original handguard as well. I just hope to get one of these one day.

Since everyone is talking about free floating handguard because of the accuracy, what is the typical accuracy of this rifle? Also, what was the typical accuracy of the RFB?
Link Posted: 8/1/2017 5:38:11 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By MDStroup:
I am liking this new handguard. But i do really like the look of the original handguard as well. I just hope to get one of these one day.

Since everyone is talking about free floating handguard because of the accuracy, what is the typical accuracy of this rifle? Also, what was the typical accuracy of the RFB?
View Quote
Typical accuracy is about 2 moa. No idea on the RFB
Link Posted: 8/2/2017 12:41:18 PM EDT
[Last Edit: 8/2/2017 12:52:27 PM EDT by LeeMajors]
Link Posted: 8/5/2017 1:18:36 PM EDT
Since these are aluminum I wonder how hot these will get after a few mags.
Link Posted: 8/5/2017 2:26:40 PM EDT
[Last Edit: 8/5/2017 2:27:02 PM EDT by LeeMajors]
No more than any AR handguard would, I'd imagine.
Link Posted: 8/5/2017 9:35:47 PM EDT
Discussion ForumsJump to Quoted PostQuote History
View Quote
I have said it before. Someone needs to buy Keltecs design and produce it with better quality (or they could step it up themselves).

That bullpup with that handguard and a SiCo omega or TBA ultra 5 would be about perfect imho
Link Posted: 8/6/2017 12:29:39 AM EDT
Discussion ForumsJump to Quoted PostQuote History
View Quote
Do you have any details or a video on how they mount? 
Link Posted: 8/6/2017 11:16:29 AM EDT
I agree. It'll be interesting to see once it's done with a suppressor on there how it looks. I'm betting pretty sharp.
Link Posted: 8/6/2017 11:17:45 AM EDT
I'm sure there will be. That's a 3D printed prototype, and are being manufactured now.

There's more pictures on the Bullpup forum from the beginning of the project.
Link Posted: 8/6/2017 12:55:31 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Originally Posted By LeeMajors:
I'm sure there will be. That's a 3D printed prototype, and are being manufactured now.

There's more pictures on the Bullpup forum from the beginning of the project.
View Quote
Thank you. Look what I missed since I havent been over there for a month. The RDB is such a fine rifle it just needs a little aftermarket push ??
Link Posted: 8/17/2017 11:43:37 PM EDT






Link Posted: Yesterday 5:20:20 PM EDT
Discussion ForumsJump to Quoted PostQuote History
Is your site down?
What's the price going to be?
Top Top