User Panel
Originally Posted By A_Friendly_Manatee:
Has anyone taken a 5.56 or 5.45 AK and had the barrel profiled to run an AE/Ops can? https://www.AR15.Com/media/mediaFiles/438110/IMG-2904-249720.JPG I have an AEM5 in jail now, and I was thinking it could be cool to run a setup like that. View Quote Low blow back cans like AE cans would be great for AKs that suffer from horrible gas leakage. |
|
|
No free man shall ever be debarred the use of arms
Thomas Jefferson If a law is unjust, a man is not only right to disobey it, he is obligated to do so. - Thomas Jefferson |
Originally Posted By SpyHawk:
I don't know what that thing in front of the gas block is, but you could probably make a custom collar that just butts up against it. Low blow back cans like AE cans would be great for AKs that suffer from horrible gas leakage. View Quote View All Quotes View All Quotes Originally Posted By SpyHawk:
Originally Posted By A_Friendly_Manatee:
Has anyone taken a 5.56 or 5.45 AK and had the barrel profiled to run an AE/Ops can? https://www.AR15.Com/media/mediaFiles/438110/IMG-2904-249720.JPG I have an AEM5 in jail now, and I was thinking it could be cool to run a setup like that. Low blow back cans like AE cans would be great for AKs that suffer from horrible gas leakage. Attached File It has a combo front sight and gas block, and the barrel looks a bit meatier than the one I posted previously. The diameter of the barrel at its widest (the chamber) is 23 mm, if that helps provide some scale. Plus I could have the barrel cut back to 14.5" and have the AEMB pinned. Here are the barrel specs for the SPR collar: Attached File (0.7495" ~ 19mm) |
|
|
|
|
Life Endowment member NRA
|
Good thread. The AEM5 is still the best-sounding suppressor in 5.56 I have encountered. I always get questions on the line as to what brand it is and why it is so quiet.
Any suggestions on a fitted cover to reduce mirage? |
|
|
Originally Posted By nihilsum:
Good thread. The AEM5 is still the best-sounding suppressor in 5.56 I have encountered. I always get questions on the line as to what brand it is and why it is so quiet. Any suggestions on a fitted cover to reduce mirage? View Quote If your gonna get the can really hot, look into the rifles only HAD. I had one and its built to take some heat(overkill for what i was shooting) so i sold it and got the cole tac. I also prefer the straps on the cole tac vs the string on the HAD, but they both work great |
|
|
I ran a high heat cole tac on my rugged surge through a Pat MacNamara carbine course with nothing more than a little discoloration. I believe the cover will stand up to any reasonable rate of aimed fire. Won't take a spendex waste of ammo but melting it will probably take more money in ammo than the cover cost in the first place.
|
|
|
Anyone know of a 5/8x24 flash hider Ops/AE suppressor mount ? The Troy is 11/16.
|
|
|
Originally Posted By kirbykid25:
I run a cole tac cover(the one with the high heat liner and outer python wrap) and really like it. I shoot mine more precision based so it doesnt get to hot. If your gonna get the can really hot, look into the rifles only HAD. I had one and its built to take some heat(overkill for what i was shooting) so i sold it and got the cole tac. I also prefer the straps on the cole tac vs the string on the HAD, but they both work great View Quote View All Quotes View All Quotes Originally Posted By kirbykid25:
I run a cole tac cover(the one with the high heat liner and outer python wrap) and really like it. I shoot mine more precision based so it doesnt get to hot. If your gonna get the can really hot, look into the rifles only HAD. I had one and its built to take some heat(overkill for what i was shooting) so i sold it and got the cole tac. I also prefer the straps on the cole tac vs the string on the HAD, but they both work great Originally Posted By SpyHawk:
I don't know what that thing in front of the gas block is, but you could probably make a custom collar that just butts up against it. Low blow back cans like AE cans would be great for AKs that suffer from horrible gas leakage. |
|
|
Originally Posted By Hunterex:
Anyone know of a 5/8x24 flash hider Ops/AE suppressor mount ? The Troy is 11/16. View Quote https://www.spikestactical.com/collections/suppressor/products/suppressor-parts-muzzle-devices-dynacomp-extreme-hvs-556?variant=32521121484 |
|
|
Finally got to put a sufficient amount of rounds through mine. Severely over gassed, causing the trigger to get fouled up and failing to reset. Adjustable gas block is on the way.
|
|
|
12 year old Mod1 with 11 year old 12th model. Attached File
2 month old Mod1/.22LR and same 11 year old 12th model Attached File |
|
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?" "I don't remember. That's the second thing they teach you." |
Originally Posted By blcouch:
12 year old Mod1 with 11 year old 12th model. https://www.AR15.Com/media/mediaFiles/65572/IMG-1989-262511.JPG 2 month old Mod1/.22LR and same 11 year old 12th model https://www.AR15.Com/media/mediaFiles/65572/IMG-1909-262514.JPG View Quote |
|
http://www.amazon.com/Gentle-Propositions-J-S-Economos/dp/0615997635
|
Originally Posted By RTUtah:
This thing should be in the Mk12 thread if it isn't already. View Quote https://www.ar15.com/forums/t_3_118/294303_MK12-mod-0-and-mod-1-pic---Discussion-thread.html The pictures aren't there anymore but I was there, man. |
|
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?" "I don't remember. That's the second thing they teach you." |
Originally Posted By blcouch:
I was in the original Mk12 thread. 8/31/2006: https://www.ar15.com/forums/t_3_118/294303_MK12-mod-0-and-mod-1-pic---Discussion-thread.html The pictures aren't there anymore but I was there, man. View Quote RonA |
|
|
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?" "I don't remember. That's the second thing they teach you." |
Nothing new on the cleaning(CLR isn't new, but seems to work pretty well on a dirty one). As far as the form 1 rimfire stuff, let me know exactly what you need.
RonA |
|
|
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?" "I don't remember. That's the second thing they teach you." |
I'm about to mount my Smith Enterprises Flash hider for my AEM5 and I have a question.
Crush washer or nah? |
|
|
|
|
Originally Posted By MisterMoad:
Thanks brother. View Quote View All Quotes View All Quotes Originally Posted By MisterMoad:
Originally Posted By pezboytate:
No. Just tighten it 5-10 lb/ft. The way the tines are angled prevent it from loosening. Food for thought. |
|
|
Originally Posted By JAR-SPR:
Do realize by using the SE Vortex you will etch a characteristic "X" pattern im the first baffle". I have heard that SE muzzle devices will actually void the lifetime warranty of AE cans. Food for thought. View Quote |
|
|
I'm working on getting some adapters made for commonly available tubes for the Form 1 community to fit the Mk12 pattern. I'm trying to get in touch with site staff to see how I can pitch them here but no luck yet. It's one of those things where a minimum order paid in full up front gets a decent price where as one at a time is more than two tax stamps
|
|
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?" "I don't remember. That's the second thing they teach you." |
Originally Posted By A_Friendly_Manatee:
Maybe I could build my own AK and use a barrel assembly like this one: https://www.AR15.Com/media/mediaFiles/438110/IMG-2909-251263.JPG It has a combo front sight and gas block, and the barrel looks a bit meatier than the one I posted previously. The diameter of the barrel at its widest (the chamber) is 23 mm, if that helps provide some scale. Plus I could have the barrel cut back to 14.5" and have the AEMB pinned. Here are the barrel specs for the SPR collar: https://www.AR15.Com/media/mediaFiles/438110/IMG-2911-251432.JPG (0.7495" ~ 19mm) View Quote View All Quotes View All Quotes Originally Posted By A_Friendly_Manatee:
Originally Posted By SpyHawk:
Originally Posted By A_Friendly_Manatee:
Has anyone taken a 5.56 or 5.45 AK and had the barrel profiled to run an AE/Ops can? https://www.AR15.Com/media/mediaFiles/438110/IMG-2904-249720.JPG I have an AEM5 in jail now, and I was thinking it could be cool to run a setup like that. Low blow back cans like AE cans would be great for AKs that suffer from horrible gas leakage. https://www.AR15.Com/media/mediaFiles/438110/IMG-2909-251263.JPG It has a combo front sight and gas block, and the barrel looks a bit meatier than the one I posted previously. The diameter of the barrel at its widest (the chamber) is 23 mm, if that helps provide some scale. Plus I could have the barrel cut back to 14.5" and have the AEMB pinned. Here are the barrel specs for the SPR collar: https://www.AR15.Com/media/mediaFiles/438110/IMG-2911-251432.JPG (0.7495" ~ 19mm) |
|
|
Originally Posted By blcouch:
I'm working on getting some adapters made for commonly available tubes for the Form 1 community to fit the Mk12 pattern. I'm trying to get in touch with site staff to see how I can pitch them here but no luck yet. It's one of those things where a minimum order paid in full up front gets a decent price where as one at a time is more than two tax stamps View Quote |
|
|
Originally Posted By MDStroup:
Can you post a link to this barrel assembly that you found? View Quote View All Quotes View All Quotes Originally Posted By MDStroup:
Originally Posted By A_Friendly_Manatee:
Originally Posted By SpyHawk:
Originally Posted By A_Friendly_Manatee:
Has anyone taken a 5.56 or 5.45 AK and had the barrel profiled to run an AE/Ops can? https://www.AR15.Com/media/mediaFiles/438110/IMG-2904-249720.JPG I have an AEM5 in jail now, and I was thinking it could be cool to run a setup like that. Low blow back cans like AE cans would be great for AKs that suffer from horrible gas leakage. https://www.AR15.Com/media/mediaFiles/438110/IMG-2909-251263.JPG It has a combo front sight and gas block, and the barrel looks a bit meatier than the one I posted previously. The diameter of the barrel at its widest (the chamber) is 23 mm, if that helps provide some scale. Plus I could have the barrel cut back to 14.5" and have the AEMB pinned. Here are the barrel specs for the SPR collar: https://www.AR15.Com/media/mediaFiles/438110/IMG-2911-251432.JPG (0.7495" ~ 19mm) http://www.k-var.com/shop/AK-102BL.html |
|
|
View Quote View All Quotes View All Quotes Originally Posted By A_Friendly_Manatee:
Originally Posted By MDStroup:
Originally Posted By A_Friendly_Manatee:
Originally Posted By SpyHawk:
Originally Posted By A_Friendly_Manatee:
Has anyone taken a 5.56 or 5.45 AK and had the barrel profiled to run an AE/Ops can? https://www.AR15.Com/media/mediaFiles/438110/IMG-2904-249720.JPG I have an AEM5 in jail now, and I was thinking it could be cool to run a setup like that. Low blow back cans like AE cans would be great for AKs that suffer from horrible gas leakage. https://www.AR15.Com/media/mediaFiles/438110/IMG-2909-251263.JPG It has a combo front sight and gas block, and the barrel looks a bit meatier than the one I posted previously. The diameter of the barrel at its widest (the chamber) is 23 mm, if that helps provide some scale. Plus I could have the barrel cut back to 14.5" and have the AEMB pinned. Here are the barrel specs for the SPR collar: https://www.AR15.Com/media/mediaFiles/438110/IMG-2911-251432.JPG (0.7495" ~ 19mm) http://www.k-var.com/shop/AK-102BL.html |
|
|
Originally Posted By MDStroup:
If you can do it, I am down for one. I am already building a reflexive suppressor, but more never hurt! View Quote |
|
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?" "I don't remember. That's the second thing they teach you." |
Originally Posted By blcouch:
So I heard back from staff. Because I'm not a dealer and the manufacturer, while a team member, is not a dealer(he wouldn't be with his type of business), a group buy is prohibited. All I needed was 10-20 items spoken and paid for to make the project happen. The only way it goes now is if I buy all 10-20 up front and sell them myself in the EE, which would raise the cost to more that most folks would want to pay. If I ever do it I'll update you guys but for now there will be no Form 1 adapter for the Mk12 platform to replicate the 12th/AEM5. Sorry. View Quote |
|
I wouldn't stand in front of a piss-filled supersoaker. Does that make it a good pistol? - Caboose314
I thought I was covered for 22 cans, but the NFAids is a bitch when it mutates - themagikbullet |
Originally Posted By bradpierson26:
What's the per unit cost estimate? View Quote |
|
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?" "I don't remember. That's the second thing they teach you." |
Originally Posted By blcouch:
My COST with not a cent of markup is $98.75 each for an order of 20 and $170.00 each for an order of 10. 17-4PH and solution blackened. I was looking at 2-3 for myself. I've posted in 2 forums that have liberal sales policies and 2 relevant FB pages. One guy basically accused me of fraud because there was prepayment required and no set date for delivery. I was quoted 4-6 weeks depending on the finisher. View Quote |
|
|
Originally Posted By SpyHawk:
So, this would be for SPR profile barrels using AEM5 / Ops Inc 12th model mounts? Or M4 profile barrels and MBS mounts? View Quote |
|
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?" "I don't remember. That's the second thing they teach you." |
Originally Posted By SpyHawk:
So, this would be for SPR profile barrels using AEM5 / Ops Inc 12th model mounts? Or M4 profile barrels and MBS mounts? View Quote Pic courtesy of ADCO Attached File |
|
"Whenever there is any doubt, there is no doubt. That's the first thing they teach you"
"Who taught you?" "I don't remember. That's the second thing they teach you." |
Hit me up if you do these. I'd buy a couple.
|
|
''Hokey religions and ancient weapons are no match for a good blaster at your side, kid.''
|
Originally Posted By JAR-SPR:
Do realize by using the SE Vortex you will etch a characteristic "X" pattern im the first baffle". I have heard that SE muzzle devices will actually void the lifetime warranty of AE cans. Food for thought. View Quote Thanks for the heads up. I was hoping to get around the insane concussion when I'm not running a can. I have the AEMB on my MK12Mod0 clone and it's loud as hell for shooters next to me without the can. I suppose I'll have to get the brake because I definitely don't want to void the warranty or ruin the first baffle. |
|
|
Originally Posted By MisterMoad:
I was not aware of this. Thanks for the heads up. I was hoping to get around the insane concussion when I'm not running a can. I have the AEMB on my MK12Mod0 clone and it's loud as hell for shooters next to me without the can. I suppose I'll have to get the brake because I definitely don't want to void the warranty or ruin the first baffle. View Quote |
|
|
Anyone have photos of how the older models (3rd model specifically) mount? I know they reflex over the barrel, back about 4". But I've heard they had some kind of split collar that clamped on back there, instead of the more modern single piece? Were they ever on skinny barrels? I can't seem to find any images of it. Did they just screw on the 1/2x28 threads on the muzzle end? Or did they have a special flashhider like the SPR?
It doesn't help that Photobucket sucks donkey, and most of the images earlier in the thread are gone. |
|
|
Originally Posted By Tumerboy:
Anyone have photos of how the older models (3rd model specifically) mount at the rear? I know they reflex over the barrel, back about 4". But I've heard they had some kind of split collar that clamped on back there, instead of the more modern single piece? Were they ever on skinny barrels? I can't seem to find any images of it. It doesn't help that Photobucket sucks donkey, and most of the images earlier in the thread are gone. View Quote [email protected] RonA |
|
|
Anybody know the weight of the collars and brakes?
I don't have any not currently mounted. Would be nice to have them listed on the OP. |
|
|
|
Originally Posted By _ERIK_:
AE30 on a Remington 700 in .300BO with a Horus hh-425. https://www.AR15.Com/media/mediaFiles/112496/IMG-3865-254700.JPG View Quote |
|
|
For those with an AEM5 on a bolt action, how do you like it and who did you use to reprofile your barrel?
Thanks |
|
|
|
Originally Posted By WillysJeep:
For those with an AEM5 on a bolt action, how do you like it and who did you use to reprofile your barrel? Thanks View Quote I use a shop that is local to me, Cross Canyon Arms for barrel work. They have done Allen Engineering, Surefire, AAC barrel profiling and fixed a barrel that had been timed bad from a previous smith. |
|
|
Any idea if it's possible to setup a SCAR 17 (factory 16" bbl) for an AEM5-30?
|
|
|
Originally Posted By wayfaerer320:
Any idea if it's possible to setup a SCAR 17 (factory 16" bbl) for an AEM5-30? View Quote It is a sweet setup. |
|
|
You guys see the new short & fat titanium reflex suppressor from Giesele that was shown on soldiersystems.net today?
I wonder if Mr Allen is thinking about any designs like that. |
|
|
Life Endowment member NRA
|
|
|
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.